Category Archives: Reviews

#0211: Stormtroopers

Posted by Ethan Wilson in Reviews and tagged with , , ,

STORMTROOPERS

STAR WARS: THE BLACK SERIES

Stormtroopers

THE FIGURE IN QUESTION

EPISODE 211

It was a dark time for the FIGURE IN QUESTION. Negotiations have broken down following the disappointment of the Slave Leia figure. The rebellion has recovered from this blow with the release of the Bespin Luke Skywalker figure. The rebels quietly celebrate their victory. Little do they know that the evil Galactic Empire has plans for an awesome figure of their own. If only the collectors could find that figure….

Yep, Star Wars: The Black Series is a pretty cool line, but I can’t help but feel that it’s a bit short on representing the Empire. Sure, we got a pretty cool Sandtrooper back in series one, but that’s just a Sandtrooper. It can’t even find the droids it’s looking for! But then, Hasbro announced the Stormtrooper! Everyone loves the Stormtroopers! And you can buy a bunch, meaning that your Empire’s ranks could quickly grow, right? Yeah, in theory anyway. But then Hasbro decided to pack him one per case. So…that didn’t go so well. After a few months I finally tracked a couple, but man…

THE FIGURE ITSELF

The Stormtrooper was released in the third series of Star Wars: The Black Series. His number is #09. The Stormtrooper is pretty much the same in every movie (I know there are some differences that a die-hard fan could point out, but I don’t know them.), so they’ve gone with the one look.  The figure is a little over 6 inches tall and has 29 points of articulation. In a first for the line, the Stormtrooper’s sculpt is mostly re-use. The figure shares everything but the belt and left shin with series one’s Sandtrooper. The head might also be a new sculpt, but I can’t tell. The difference might just be paint releated. Anyway, the sculpt was nice to begin with, so it works really nicely here. The big difference between this figure and the Sandtrooper is the paint. The Stormtrooper is much cleaner, which makes the figures sculpt look a bit bolder. The figure is mostly molded in the appropriate white, but he has some black detailing, which is mostly clean. I did notice a few areas of slop, but they seem to vary from figure to figure, so check them if you have the opportunity. The Stormtrooper includes two accessories: his basic rifle, which is reused from both the Sandtrooper and Han Solo, as well as a larger rifle, which is speculated to see a re-use with robot assassin IG-88. Once again, this is a bit of a step down from earlier series, but I can’t really think of anything else to give the troopers.

THE ME HALF OF THE EQUATION

After a while of searching, I finally caught the Stormtrooper while it was in stock on Amazon. I was able to get two of them, because you can’t just have one Stormtrooper, that would be wrong. I had enjoyed the Sandtrooper quite a bit, and was eager to see how the sculpt would look when used for the main trooper. Aside from the issues finding the figures, they really didn’t disappoint!

StormTrooperswbubble

#0210: Luke Skywalker – Bespin

Posted by Ethan Wilson in Reviews and tagged with , , , ,

LUKE SKYWALKER – BESPIN

STAR WARS: THE BLACK SERIES

Luke(Bespin)

I’m just a moderate Star Wars fan, but I am an action figure fan (in case the site hadn’t already clued you in on that…), and that means I frequently find myself venturing into the galaxy far, far away for my purchases. Hasbro recently brought the characters into the 6 inch scale with their new Star Wars: The Black Series. The line boasts improved sculpts, better articulation, and a greater selection of accessories. It’s also quickly become one of my favorite lines. The third series proved to be a bit difficult to procure at first, but I’ve finally tracked a set down and I’ll be reviewing them today and tomorrow (It’s only a three figure assortment and I don’t need prequel Obi Wan, so just the two for me.)

THE FIGURE ITSELF

Luke comes from the third series of Star Wars: The Black Series. Each figure in the line gets a number, and Luke is #011. He’s presented here in his main gear from The Empire Strikes Back, generally referred to as his Bespin look. It’s generally see as one of the character’s definitive looks, so it’s great to see it in the line. The figure stands just shy of 6 inches tall and features 29 points of articulation. All of the articulation seems to work pretty well, though I am slightly annoyed by the choice to give both hands a forward/back joint instead of the usual mix of one forward/back, one left/right. It’s a minor issue, but it limits the pose-ability a bit. Luke features an entirely new sculpt, which is great all-around. It’s well proportioned, nicely detailed, and the head has more than a passing resemblance to Mark Hamill. He also features an add-on belt piece, which could probably be removed if you so desired, but isn’t meant to be. On the paint side, he’s not quite as good as previous waves, but he’s not bad, and seems a lot better than I’d heard from other reviews. My figure seems to have received a decent paint job with no slop or bleed over. He’s got a decent wash on his body-suit, which does an excellent job bringing out the details in the sculpt. Luke is accessorized with a blaster and a lightsaber, both of which are reused from the previous LightsabersLuke. This is a bit of a letdown, given the larger selection featured with the rest of the line. Heck, the previous Luke even included a helmet in addition to these two pieces. I’d have liked to at least get a few extra hands, or at bare minimum that his right hand was removable to recreate the Bespin duel. Alas, he just gets the two pieces. Oh well.

THE ME HALF OF THE EQUATION

I got Luke from Amazon. He’s been in stock there for a little while, but I wanted to wait until they got in the Stormtrooper at a reasonable price before ordering him. Initially, I wasn’t sure I was going to get this figure. I already had the pilot version of the character from series one, and that’s a really cool figure. However, once I saw some pictures of this figure, I knew I couldn’t miss out on him. Plus, he’s Bespin Luke. What kind of a fan would I be if I didn’t have him? Anyway, I’m really glad I got this figure, and I’m going to have a lot of trouble picking which of the two Lukes will be my default.

SwBlacks1vss2

#0209: Stargirl

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

STARGIRL

DC UNIVERSE CLASSICS

Stargirl

If you liked yesterday’s Aquaman review, you’ll be happy to know I’ll be taking a look at yet another DC Universe Classics figure today. This time around, it’s Stargirl, who is most commonly known for her association with the Justice Society of America. She’s one of DC’s better characters in recent years, and if you’d like to know more, you can check out her entry in the Backstories section, here.

THE FIGURE ITSELF

Stargirl was released in the 19th series of DC Universe Classics. The series was themed around the Justice Society, so her inclusion makes sense. Stargirl stands about 6 inches tall and features 25 points of articulation. Astoundingly for DCUC, Star Girl is almost an entirely unique sculpt. Only her forearms and boots are re-use, hailing from the 90s Supergirl from Mattel’s earlier line DC Super Heroes. The body sculpt is pretty decently done. She’s well-proportioned all around, and looks appropriate to the character. Sadly, the head doesn’t fair as well. They tried to give her a grinning expression, and she ends up looking a bit like the Joker. I’ll give them credit for trying something different, but it just didn’t work out. The paint work is all very clean, and I really like the metallic blue they used, but the head is once again hit the hardest. The paint on the teeth makes the sculpt look even worse, which is really sad. Stargirl includes her cosmic staff and a piece of series 19’s C-n-C, STRIPE. The staff is a nice piece, though it’s been molded in clear yellow for some reason, and she has a little bit of trouble holding it.

THE ME HALF OF THE EQUATION

Stargirl was picked up for me by my Dad. He found her in the store and knew I’d been looking for one, so he bought it for me. I know I kinda ragged on her, but I honestly don’t think Stargirl’s that bad a figure. Sure, the head sculpt leaves a bit to be desired, but I’ve seen worse and the rest of the figure is handled very well. Plus, it’s a character I like, so I’m just glad she got a figure at all.

#0208: Aquaman – Camouflage

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

AQUAMAN – CAMOUFLAGE

DC UNIVERSE CLASSICS

Aquaman(Camo)

Aquaman tends to get a bad rap. People are very quick to label him as “lame” or “stupid.” Now, I’m not one to tell people they aren’t true fans, or say my opinion is law or anything, but I feel like people that write the character off like that aren’t really looking at the character too closely. I mean, the guy lives at the bottom of the ocean. Dude’s gotta be super-jacked! Certainly not the kind of guy I’d want to make fun of.

That being said, in the 80s, Aquaman got a mini-series where he was given a new costume to replace his classic orange and green look. It was water camouflage.  It was lame. It was stupid. And, it was one of the versions of the character released in Mattel’s DC Universe Classics. “Ethan, if you think the costume is lame and stupid, why do you have an action figure of it?” Because shut up, that’s why!

THE FIGURE ITSELF

Aquaman was released in the 7th series of DC Universe Classics. He is in the aforementioned “Aqua-Camo.” The figure is about 6 ½ inches tall and features 25 points of articulation. He’s built on slightly larger male buck, which fits the king of the seas, I suppose. His head is reused from DCUC’s previous Aquaman figure. Yes, he was a total re-use figure. At least the reused parts are good pieces. The head sculpt is definitely one of the line’s stronger pieces. It has just the right amount of nobility and heroism that should be present in the king of Atlantis. One thing I did notice is that he has a slight mutilation on his face that results in some lines that shouldn’t be there. I actually like the look, as it kind of look like some cool scarring, but I imagine not everyone would be so thrilled. The paint work is pretty good. They’ve replicated the design of the suit very well, and it does really pop, which is always nice. It has a few fuzzy lines here and there, but nothing out of the ordinary for a DCUC figure.  Aquaman includes a trident and a piece of the series’ C-n-C, Atom Smasher. This is my first Aquaman I’ve reviewed on the site, so I’m gonna address this here: what is up with the tridents? Aquaman pretty much never carries a trident, and yet every single Aquaman figure’s got his friggin’ trusty trident!

THE ME HALF OF THE EQUATION

I purchased this figure for two reasons: I wanted to finish Atom Smasher, and the basic Aquaman was hard to find. Seriously, I’ve never actually seen the regular Aquaman in person. The series he was in was pretty much impossible to find. So, I had to settle for true blue here. He’s actually not a bad figure, even if I’m not the biggest fan of the costume. He also adds a nice splash (heh!) of blue to the JLA shelf.

#0207: Supergirl & Bizarro

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SUPERGIRL & BIZARRO

DC MINIMATES

Bizarro&Supergirl

Goodbye! Today, me no am reviewing figures from my least favorite toyline ever, Minimates. Me no am happy to be reviewing Minimates. They am terrible! Figures today not come from DC Minimates, a line which had too many series. Figures am two minor characters from DC’s least popular comic, Superman.

THE FIGURES NO AM THEMSELVES

Figures no am from 6th series of DC Minimates. They no am from near end of line.

PRETTY LADY S GIRL

Supergirl no am Superman’s cousin. She am very old lady, who am left on Argo, capital city of Krypton, which am destroyed before Krypton exploded. Supergirl am very tall figure, not based on normal Minimate body. She no features 14 points of articulation and am 2 ½ inches short. Supergirl have three old pieces. They no am right for the character. They am too skinny. Pieces am sculpted very rigid. Paint am okay. This am very bad. There am no interesting details. Supergirl’s face am very calm, and am same as others. Supergirl am well accessorized with nothing.

ME AM BIZARRO

Bizarro am original Superman. He am greatest hero ever and am great friend of Superman. He am not based on classic Bizarro, which am terrible! Bizarro am no based on minimate body, and no have normal features. Bizarro no have three sculpted pieces: hair, cape, and belt. Cape and belt brand new pieces and hair am re-use. Pieces no am good for figure. Am terrible representation of character. Bizzaro’s paint am no good. This am very bad. Slop am everywhere. Bizarro’s face am no detailed very well. He am very sad looking. Me Bizarro am include “Bizarro #1” necklace, which other Bizarro’s no am included. Me am happy about this.

ME AM THREE HALVES OF THE EQUATION

Ethan sell Bizarro and Pretty Lady S Girl from distant comicbook store, Cosmic Comix. Me no get them when they am unreleased. Me no am like them. They am terrible figures of characters. They am no important characters to Superman.

 

Confused?  This post was written in Bizarro speak.  If you’d like a translation, click here.

#0206: Iceman

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ICEMAN

MARVEL LEGENDS

IceMan

It’s not a line I have fond memories of in hindsight, but when it was brand new, I was all about ToyBiz’s Marvel Legends. It was THE line to collect in the early 2000s, and it offered “hyper-detailed” versions of classic characters. Looking back, there are a few gems from those early lines, but most of the figures just end up looking like an oddly shaped mess. A very well-articulated oddly shaped mess, but a mess nonetheless. Today’s figure comes from the latter group.

THE FIGURE ITSELF

Iceman was released in the 8th series of ToyBiz’s Marvel Legends. He’s a little over 6 inches tall and features 44 points of articulation, which is a lot. However, like many of the ToyBiz era ML figures, a lot of this articulation cancels itself out. I think this was when ToyBiz was more interested in jamming in articulation just because they could. Iceman has a new head on a body re-used from the Black Costume version of Spider-Man in Toybiz’s Spider-Man line around the same time. The body worked okay for Spider-Man, but it just seems really strange looking for Iceman. The proportions are very strange, especially around the shoulders, where he has 6 joints on each side. It just doesn’t look right. The head sculpt is pretty good, but it seems weird seeing it on that odd body. The paint work is a bit uneven. They’ve gone with a blue airbrush technique, but it looks different from piece to piece. This gets rather distracting when the figure is completely assembled. Iceman came packaged with a display stand that looked like a damaged sentinel hand.

THE ME HALF OF THE EQUATION

Believe it or not, I was actually pretty excited for Iceman at the time of his release. I was working on an X-Men set-up at the time, so I guess I was excited to get such a key player. If I remember correctly, Iceman was a gift from my parents, I think for Valentine’s Day. Yeah, my parents used to buy me toys for Valentine’s Day. There really was no escaping the collection, was there?

#0205: Hal Jordan, Sinestro, & Abin Sur

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

HAL JORDAN, SINESTRO & ABIN SUR

JUSTICE LEAGUE UNLIMITED

IMG_1737

It’s no secret that I’m a pretty big Green Lantern fan. Due to this, I own a metric ton of Green Lantern crap. Good or bad, I own it. There is, however, one Green Lantern item that I will never, ever, own. That is the Hal Jordan Green Lantern figure based on the character’s brief cameo in the Justice League Unlimited episode “Once and Future Thing.” Mattel decided to give this figure out as a gift to a number of Warner Brothers executives one year. I believe the number of figures in existence is in the low three-figures. Unsurprisingly, the figure rarely shows up on the aftermarket, and when one does, they go for prices far beyond what someone like me can reasonably pay.

So, I was bummed. I mean, Hal Jordan was one of my favorite characters of all time, and I would be unable to own him in the primary DC scale of the time. What a bummer! Then came the set I am reviewing today, offering me another chance at the character. No, it’s not the same, but it’s something, so I’ll take it.

THE FIGURES THEMSELVES

Hal Jordan, Abin Sur, and Sinestro were released as part of a San Diego Comic Con exclusive three pack, meant to sort-of promote Justice League: New Frontier. Hal and Abin are based loosely on their appearances there, and Sinestro is based on his GL look in the comics. All three feature swappable heads, to allow Hal to be displayed in either of his GL uniforms. It’s debatable as to whether it works or not.

HAL JORDAN

Hal is presented here in his Ferris Aircraft-issued test pilot gear. He stands just shy of 5 inches tall and has 5 points of articulation. He features a brand new head and legs, along with the basic medium build torso and arms and a coat add-on previously used on Mr. Terrific. The head looks pretty accurate to what Hal looks like in New Frontier, so that works. The re-use all works appropriately as well. The paint work is okay, though there are some fuzzy lines in a few spots.  Hal has no accessories, unless you want to count Abin and Sinestro…

ABIN SUR

Abin Sur is presented here in the GL uniform he wore in his original appearance. This was a bit of a contentious point amongst fans, because it’s not the design he sported in his appearance in the Animated universe. It was done to facilitate the Hal Jordan thing, but I guess I can see the annoyance. Abin is built on the medium build body with a brand new head. The head is a bit big for the body, but overall it looks nice, and the medium body was the best of the bucks Mattel used for this line. The paint is serviceable, though it also still has a few fuzzy lines.

SINESTRO

Sinestro is shown here in his GL uniform, which he never actually sported in any of the animated material, but they wanted to do the interchangeable heads thing, so there it is. Sinestro is a complete re-use. He’s built on the same medium body as Abin, and shares a head with the previous Sinestro figure. If it ain’t broke, don’t fix it. The paint is nice and clean, cleaner than the other two, in fact, which is something I suppose.

THE ME HALF OF THE EQUATION

I picked this set up off of Matty Collector following SDCC. It was mostly painless. It’s not the same as the super rare Hal, but this set isn’t too bad. It provides a perfectly fine version of Hal, and Abin and Sinestro are pretty cool too. It’s not a thrilling set, but it is cool for someone who’s a fan of Green Lantern, which is a bill I fit. Yay.

#0204: New Mutants Magik & Warlock

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

NEW MUTANTS MAGIK & WARLOCK

MARVEL MINIMATES

Warlock&MagikWarlock&MagikAlt

Marvel! Minimates! Marvel! Minimates! Marvel Minimates! Yep, another Marvel Minimates review today. This time around, I’ll be taking a look at two of the New Mutants (well, technically three), an offshoot of the X-Men. The characters are Magik (or, “New Mutants Magik,” because branding) and a combo figure of Warlock and Cypher. If you’d like to know a little bit more about them, check out Magik’s backstory here, and Warlock and Cypher’s here.

THE FIGURES THEMSELVES

This set was released as part of the 9th Toys R Us exclusive series of Marvel Minimates, and was released to coincide with Diamond’s New Mutants boxed set.

NEW MUTANTS MAGIK

Magik was one of the more prominent members of the team, and ended up being one of the few to move to the X-Men proper. She’s depicted here in her New Mutants uniform, so she fits in with the others. Magik is built on the standard Minimate body, which means she sports 14 points of articulation and stands about 2 ½ inches tall. She has a sculpted hairpiece and a shoulder pad. Both pieces are new to this figure and look spot on to her comicbook counterpart. The shoulder pad is a bit loose, but it looks good when it sits properly. She also features gloved right hand, which is a re-use. The paint work is a bit mixed. The detail lines are nice and clean, and I quite like her sly expression, but the base paint is a bit sloppy. Magik has two accessories: a fiery sword and a stand that replicates her teleportation abilities. They are both new pieces, and they are great additions to the figure.

WARLOCK

Now, the figure that is actually two figures in one. This figure not only represents shape-shifter Warlock, but also the team’s resident brainiac Cypher. It’s a nice idea, given the closeness of the characters and the fact that Cypher might not be the most exciting figure on his own.  Warlock/Cypher is built on the basic body, just like Magik. He features five newly sculpted add-ons: head/mask, gun arm, claw arm, torso, and left foot. Warlock had an always changing look in the comics, but these seem to do the job well enough. He also features a torso extender, which is reused from a modern Battlestar Galactica Cylon. The paint is similar to Magik, in that the detail lines are nice and clean, but some of the more base paint is a bit fuzzy around the edges. Still, the detail work is impressive, especially at this scale. Warlock includes a hairpiece, hands and feet to allow you to display the figure as Cypher, which is a really cool option.

THE ME HALF OF THE EQUATION

This set is actually one of the few TRU exclusives I didn’t have any trouble tracking down. Just found it in my local store one day. If I recall correctly, I was even asked what Minimates were by the woman standing behind me in line, which was cool. I really like this set, especially because it features my three favorite members of the New Mutants, especially Warlock. In a sad twist of fate, Warlock is actually one of the few Minimates I’ve ever lost, misplaced somewhere between my dorm room and home. I ended up having to get a replacement (for quite a mark-up) from Amazon. But, it was definitely worth it. I really like this set, even more than the boxed set it was meant to augment.

#0203: Anakin Skywalker – Hanger Duel

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ANAKIN SKYWALKER – HANGER DUEL

STAR WARS SAGA

Anakin

So, I kind of missed May the 4th, or Star Wars day as its come to be known. Yeah, I was busy over the weekend, and totally didn’t think of the date. Which meant my May 4th review was the T-1000, not something Star Wars related. For those of you that were offended by that, I am eternally sorry. I’ll try not to let it happen next year!

Today’s figure is Star Wars themed. I’d say that it was an apology, but it’s Anakin, so…

THE FIGURE ITSELF

Anakin was released as part of one of the later assortments of Star Wars Saga, which was the line released around the time of Star Wars: Attack of the Clones. This particular figure is the “hanger duel” version of the character, which is Anakin from his battle with Count Dooku at the end of the movie. He’s in his basic Jedi garb from the movie. The figure stands about 3 ¾ inches tall and has 9 points of articulation. The hips are rendered practically motionless by the skirt piece, plus his shoulders are on a weird diagonal, and the elbow joints are just straight cut joints, which means they do nothing. Essentially, his articulation is mostly pointless. The sculpt isn’t terrible, though he has some monkey arms, and he doesn’t look much like Hayden Christiansen. But the texture work is pretty nice. The paint is fairly basic, but is cleanly applied, with no slop or bleed over. The figure features two action features. The first is a wheel on his back that spins his left hand. The second is a removable right arm, attached via magnets (because Hasbro was obsessed with them at the time), which replicates Anakin’s injury from the duel. The figure included two lightsabers: one green, one blue.

THE ME HALF OF THE EQUATION

I got Anakin from a trip to my local Toys R Us with my Dad. I was obsessed with Star Wars toys at the time, and I thought Attack of the Clones was a lot better than it actually was. It was truly a blissful time. Anyway, I has been looking all over the place for this figure, after seeing it online. It’s not the greatest figure, but I do actually feel a bit of sentimental attachment to it.

#0202: Leonardo

Posted by Ethan Wilson in Reviews and tagged with , ,

LEONARDO

TEENAGE MUTANT NINJA TURTLES

Leonardo

The Teenage Mutant Ninja Turtles are a cultural phenomenon that I seem to keep missing. The original series and all the associated toys and such ended just before I got into this whole toy thing. When the series was re-launched it in the early 2000s, I was kind of past that point of finding new series to obsess over.  Granted, I still enjoy the characters, and like the episodes I’ve seen of the cartoons, but I don’t have the undying love for it that others do.

Recently, Nickolodeon purchased the franchise, and launched yet another cartoon. I’ve only seen the first few episodes, but I really like what I’ve seen so far. Of course, being me, I bought most of the action figures. Today, I’ll be taking a look at the leader of the Turtles, Leonardo.

THE FIGURE ITSELF

Leonardo was released as part of the first series of Playmates Toys’ new Teenage Mutant Ninja Turtles based on the new show. The figure stands about 5 inches tall and has 19 points of articulation. The sculpt on this figure is handled very nicely. Playmates seems to have put their own spin on the Turtles designs. They seem to be a bit more detailed than their cartoon counterparts. That’s works out better and leads to more interesting figures. There is a nice assortments of textures all around the figure, which really makes him a standout figure. The paint is not quite as detailed as the sculpt, but everything is cleanly applied, with no noticeable slop or bleed over. Leonardo includes his trusty katana, which can be easily stowed in the sheaths on his back, as well as a “tree” of lots of other smaller accessories.

THE ME HALF OF THE EQUATION

I mentioned in the intro that I picked up these figures around the premiere of Nickolodeon’s new show. If I remember correctly, I picked up most of them prior to seeing the first episode. Leonardo is actually my least favorite of the Turtles, so I only decided to get him bundled with the rest. I actually really like this figure a whole lot. He’s got a great design and he’s just a really fun figure!