Category Archives: Reviews

#3218: Fifth Brother

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FIFTH BROTHER

STAR WARS: RETRO COLLECTION (HASBRO)

Originally introduced in the second season of Rebels, the Fifth Brother is a character that’s never been all that deeply explored, despite now having been in two different shows.  Like, I’ve watched all of his canon appearances, and I couldn’t really tell you much about the guy beyond that’s he’s got that fancy hat thing going on.  I suppose that’s a pretty respectable thing in Star Wars, though, since distinctive looks tend to be a character’s biggest selling point.  Did wonders for Boba Fett.  Anyway, let’s look at this guy and his fancy hat.

THE FIGURE ITSELF

The Fifth Brother is the fifth figure in the Kenobi-inspired series of Hasbro’s Star Wars: Retro Collection.  He’s the third of the three Inquisitors included in this assortment, and marks the Fifth Brother’s third figure, following up on a small-scale figure from Rebels and a Black Series figure from Kenobi.  The figure stands about 3 3/4 inches tall and he has 5 points of articulation.  His sculpt is all-new, though it certainly has its share of similarities with the Grand Inquisitor.  That makes sense, of course, since they’re kind of in the same profession and all.  That said, they’re totally unique from each other when it comes to the actual parts break down.  He’s a little bulkier than the Grand Inquisitor, which makes sense, and allows for the uniform to sit just a little bit differently.  His head, and his face in particular, gets quite a bit of sculpted detail, moreso than the others in the set.  It gives him quite a distinguished look.  The Fifth Brother’s paint work is pretty much on par with the other Inquisitors in the set.  Still feels like a bit too much for a proper vintage paint scheme, but honestly, it still works out pretty well, and I do appreciate the internal consistency.  The Fifth Brother is packed with his Inquisitor Saber, which is the same one included with the Grand Inquisitor.  It makes sense, since they have more or less the same weapon in the show, and it’s definitely the way Kenner would have handled things on a proper vintage figure.

THE ME HALF OF THE EQUATION

I don’t have much attachment to this guy.  I mean, honestly, does anybody?  Well, somebody does somewhere, I’m sure.  Like, just statistically, right?  Anyway, I wasn’t invested enough to get the Black Series figure, but since I was planning to pick up the rest of the series, this guy was along for the ride.  He’s not a bad figure.  Not my favorite or anything, but I can see the appeal.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

 

#3217: Grand Inquisitor

Posted by Ethan Wilson in Reviews and tagged with , , , ,

GRAND INQUISITOR

STAR WARS: RETRO COLLECTION (HASBRO)

While some of Kenobi‘s returning characters were picking up from where they’d left off earlier in the timeline, there were also a few that were *technically* making their earliest appearances within the timeline.  Today’s focus, the Grand Inquisitor leans heavily on the “technically,” since, via retcon, he was actually present in one scene in Clone Wars, but as far as proper appearances go, the Grand Inquisitor truly hails from Rebels, where he serves as the primary antagonist for the first season, and ultimately closes off his story.  For Kenobi, he’s more of a background character, sidelined for most of the story, but he’s still present enough to justify some toy coverage!

THE FIGURE ITSELF

The Grand Inquisitor is the fourth figure in the Kenobi-series of Star Wars: Retro Collection, the fifth overall series of the line, and the third at mass retail.  Thus far, this is his first figure from the show, since his Black Series offering is still pending.  The figure stands about 3 3/4 inches tall and he has 5 points of articulation.  He’s sporting an all-new sculpt, obviously meant to be based on his live-action design, though thanks to the styling of the line, he serves as a nice mid-point between live action and animation.  The sculpt on this guy is pretty decent.  Obviously, lighter on the detail side, but all the key stuff is there, and his outfit is actually quite well detailed.  It’s cleanly handled, and the details are well rendered.  He’s got another vinyl cape; this one’s got a far more unique cut to it, which fits the design from the show pretty well.  It does make it a little trickier to get it on and off, but it’s certainly not impossible.  His paint work is again probably a touch too involved for proper vintage coverage, but it’s consistent with that of Reva, so they go well together.  It also still dials things back just a little bit, so it won’t look too out of place with actual vintage offerings.  The Grand Inquisitor is packed with his lightsaber, which is similar to Reva’s, but has a guard that goes all around, accurate to his personal weapon.

THE ME HALF OF THE EQUATION

I enjoyed the Grand Inquisitor well enough in Rebels, but given how his story wrapped up in that show, I wasn’t really sure there was much more to do with him in Kenobi.  I actually kind of liked the misdirect within the show, and I don’t mind the opportunity to get him in figure form.  This one’s actually a lot of fun, more than I was expecting, even.  He honestly makes me kind of want the proper Rebels cast in this style, just because that seems like it would be pretty nifty.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3216: The Creature From the Black Lagoon – Glow-in-the-Dark

Posted by Ethan Wilson in Reviews and tagged with , , ,

THE CREATURE FROM THE BLACK LAGOON — GLOW-IN-THE-DARK

UNIVERSAL MONSTERS (JADA TOYS)

Happy Halloween, readers!  In honor of the day, I’m erring slightly on the spookier side, as I like to do, settling in for another Universal Monsters review.  In something of a change for the site, my last Universal Monsters reviews were actually not last Halloween, but in fact were in February of this year, when I took a look at Frankenstein’s Monster and the Bride from Jada’s own Universal Monsters line.  Today, I’m taking a look at another figure from the line, in the form of Gill-Man from The Creature From the Black Lagoon.  Let’s see how he turned out!

THE FIGURE ITSELF

The Creature From the Black Lagoon is the first follow-up to the first four figure series of Jada’s Universal Monsters line.  He takes the standard Gill-Man from the first series and makes him Glow-in-the-Dark.  He was released as an Entertainment Earth-exclusive.  The figure stands just shy of 6 3/4 inches tall and he has 29 points of articulation.  As I touched on when I reviewed Frankenstein back in February, the articulation scheme on these figures is actually pretty impressive for a company of Jada’s standing; it’s on par with some of Hasbro’s best offerings, albeit perhaps a year removed from where they are now.  2022 was a good year for Hasbro on the articulation front.  That doesn’t undermine what Jada’s got going on here, though, and Gill-Man’s articulation is even better than the Monster’s, due to his slightly less bulked-up build.  The figure’s sculpt is another strong offering.  He does quite a nice job of capturing the film design for the character, right down to getting all of the texturing and everything down with quite sharp detail.  Additionally, all of the articulation is worked in pretty nicely to the aesthetics of the overall sculpt, and they don’t require his sculpt to be broken up too badly when he’s posed either.  For the purposes of this release, in order facilitate the glowing feature, he’s molded in glow-in-the-dark plastic, with the rest of the paint built on top of that.  The plastic takes a fair bit of time to charge up for a proper glow, but it does at least hold it for a while.  The accent paint works out pretty nicely, though, and offsets the general look of the plastic rather nicely.  Gill-Man is packed with an alternate head with the mouth closed, an extra left hand for gripping, a harpoon gun, a net, and the decayed creature hand.

THE ME HALF OF THE EQUATION

Creature has never been one of my favorites of the Universal slate.  It just always felt like the red-headed step-child of the group, and it’s really just never clicked with me the same way.  That being said, it’s hard to deny that Gill-Man has a killer visual, and one that makes for some cool toys.  This one in particular, in all of its glow-y glory, was one I definitely wanted to mess with, if perhaps not one I was dead set on owning.  One got traded into All Time a few weeks back, and they were kind enough to let me borrow it for the purposes of this review.  He’s honestly a ton of fun, and I look forward to the upcoming figures from the line.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3215: Batman Beyond

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BATMAN BEYOND

BATMAN: ANIMATED (DC COLLECTIBLES)

Before their demise, DC Collectibles had quite a run with their Batman: Animated line, dedicated to specifically the Batman side of the DCAU.  The stuff was mostly based purely on Batman: The Animated Series and The New Adventures of Batman, but towards the end of things, they tried expanding their reach a little bit more.  Keeping things within the Bat-family, there was one single boxed set based on Batman Beyond.  I’m gonna let you know upfront, I’m not doing the whole set.  But I do have the BB, so, you know, there’s that!

THE FIGURE ITSELF

Batman Beyond is one-third of the “Batman Beyond” three-pack from DCC’s Batman: Animated line, which was released in early 2017.  The figure stands about 5 3/4 inches tall and he has 24 points of articulation.  The articulation schemes for these figures were always spotty, up until the last assortment, and BB is more of that.  He’s not terrible.  The head and the ankles do okay on the range of motion, but the elbows and knees are, on the flip side, kind of restricted.  He also has the issue of no lateral movement below the hips, which plagued so many of the line’s figures.  The ankles do at least work out a bit better in conjunction with everything, so he’s not quite as pigeon-toed.  The quality of the sculpt is at least pretty good.  Honestly, this is probably the closest to an animation-accurate Batman Beyond we’ve ever gotten.  Yeah, that was the aim of the line, but they also tended to miss the mark, so them getting it so close here was definitely an accomplishment.  BB’s paint work is pretty basic, but it’s checks all the right boxes.  The colors match the cartoon, and the application is actually pretty clean.  It’s again a pretty nice change of pace, given how fuzzy the work on other figures in the line tended to be.  BB was packed with four sets of hands (in fists, gripping, and two different styles of open gesture), a removable set of wings, two batarangs, and a display stand.  My figure is without the batarangs and stand, but he’s got everything else.  The wings being removable is nice, since, you know, not everybody does that.  I’m not super keen on the way they get broken up by the joints, but I suppose it’s kind of a catch-22.  It could be worse, though, and when posed properly, they honestly look better than I’d expected.

THE ME HALF OF THE EQUATION

While I kept up with this line pretty closely when it first launched, by the time this set came along, I had kind of gotten burned out.  With just about everything eventually going on serious mark down, I opted to hold out on this one.  Unfortunately, it wound up being short-printed, since just about everyone else was seemingly burning out around the same time.  It wound up picking up quite a hefty price on the aftermarket, and that was all she wrote.  Well, until a Batman Beyond got traded into All Time all by himself.  I’m still looking for the best possible version of the character, and, honestly, this one’s better than I’d expected.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3214: Reva – Third Sister

Posted by Ethan Wilson in Reviews and tagged with , , , ,

REVA — THIRD SISTER

STAR WARS: RETRO COLLECTION (HASBRO)

Obi-Wan Kenobi was definitely populated with a lot of characters we’ve seen elsewhere in the saga, but it wasn’t without its standouts in the new character department.  Amongst those new characters was Reva, an antagonistic force throughout the story, whose own journey was run parallel to that of Obi-Wan and Anakin.  After years of exploration of the increasing number of Jedi padawans that made it out of Order 66, her story was a dark reflection of many of them, showing the unfortunate and destructive path that such trauma can impose upon a person.  Oh, and she was also the latest addition to the growing list of “worst characters in Star Wars,” according to a vocal minority of the “fandom.”  She’s just absolutely ruining the franchise, really.  And she’s doing in three separate styles of toy, no less.  The nerve!  Well, I guess this site’s about the be ruined, too.  Just kidding; we already passed that mark years ago!

THE FIGURE ITSELF

Reva (Third Sister) is the third figure in the Kenobi-series of Star Wars: Retro Collection, which is the fifth overall series of the line, and the third to get a proper mass release.  This marks Reva’s third figure, following the Black Series and Vintage Collection offerings, though it’s worth noting that they did all hit pretty close together.  Kudos to Hasbro on ruining all of their lines more or less simultaneously!  The figure stands a little under 3 3/4 inches tall and she has 5 points of articulation.  The sculpt is totally unique, with no basis on any earlier offerings.  It’s a pretty nice one, honestly.  The likeness is obviously not meant to be an exact recreation of Moses Ingram, but it’s a good approximation of her look viewed through the lens of the original line.  The body sculpt captures all of the main details from her costume design, and it’s generally nice and sharp in its detailing.  Her cloak goes back to the vinyl construction, which somewhat clashes with the prior two figures, but also feels more appropriate for this particular design.  Kenner did mix cloth and vinyl during ESB, so it’s not entirely without precedent.  As has been the trend up to this point, the paint work is perhaps a little bit too involved for a true Kenner release, but it’s kind of fun to get that slightly idealized set-up.  The two-toned coloring on the outfit actually looks really solid.  Not sure why she’s lacking eyebrows, but, you know, it’s a choice.  Reva is packed with her Inquisitor-style saber, which is a new piece modeled somewhat on the Bespin Luke saber, but with the two blades and Reva’s distinctive single hand guard.

THE ME HALF OF THE EQUATION

Despite her supposed ruining of the franchise, I didn’t mind Reva.  You might even say I, like, actually liked her and the role she played on the show.  That said, I’m finding myself not needing every single character in Black Series form.  Something about this release in particular just really spoke to me, and really sold me on the full Retro line-up.  She’s actually a lot of fun, despite perhaps not being the most outwardly thrilling design.  Definitely a nifty addition to the line-up.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3213: Darth Vader – The Dark Times

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DARTH VADER — THE DARK TIMES

STAR WARS: RETRO COLLECTION (HASBRO)

Though he may have died at the end of Return of the Jedi, Darth Vader, as perhaps one of best villains of all time, has still remained a fixture of the Star Wars universe.  After Jedi, the character tended to have some of his menace removed from him in subsequent appearances, but starting with Rogue One, there was a very definite attempt at returning him that menace.  Obi-Wan Kenobi takes that even further, giving us quite possibly the most imposing, powerful, and generally terrifying version of the character yet.  There’s a rawness to how he’s portrayed, and it really works, again with the themes of merging the stylings of the Prequels and the Original Trilogy.  And, as per usual, it gives us another go at basic Darth Vader figures, so that’s pretty cool.  Let’s look at one of those today.

THE FIGURE ITSELF

Darth Vader (The Dark Times) is the second figure in the Kenobi themed series of Hasbro’s Star Wars: Retro Collection, which is the line’s fifth assortment overall.  He’s the third version of Vader in the line, following the straight re-issue of the vintage Vader, and the Target-exclusive “prototype” Vader.  The figure stands closer to 4 inches tall and he has 5 points of articulation.  In contrast to the other two Retro Collection Vaders, this one is a new sculpt.  The head is pretty consistent stylistically with the original Vader sculpt, though it does appear to actually be a unique piece, with a slightly different shaping, and a little bit more detailing.  Below the neck, he’s totally new, updating Vader to the later film stylings.  His right arm is no longer has the extending saber built-in, and both hands are now designed for gripping accessories.  He also gains the inner robes that original figure lacked, albeit worked in as the usual split-leg set-up like the others from the vintage line.  Instead of the vintage vinyl cape, this one gets a cloth one, which sits more properly on the shoulders.  It’s a rather thin piece of cloth, but otherwise works out pretty well.  Vader’s paint work is again a little more involved than perhaps a true vintage release might have been, with full detailing on his chest panel, and extra silver details on his belt, as well as red lenses for the eyes.  Again, more of an idealized set-up, but one that still feels pretty true to the original feel.  Vader is packed with a recoloring of the Bespin Luke saber, but in red this time.

THE ME HALF OF THE EQUATION

Vader is one of those characters whose lack of major changes in design makes for less need for updates.  In the vintage line, that translated to only the one single figure.  It’s a distinctive figure, sure, but it’s also a kind of limiting one, compared to how the rest of the figures evolved over the course of the line.  Going back and doing an update is something that I’ve kind of wanted to see since this line launched.  This one’s pretty fun.  He’s similar to the original, but with enough changes to make him feel worthwhile.  I’d love to maybe see an unmasked Vader come out of this mold as well, but until then, this one’s certainly not bad.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3212: Obi-Wan Kenobi – Wandering Jedi

Posted by Ethan Wilson in Reviews and tagged with , , , ,

OBI-WAN KENOBI — WANDERING JEDI

STAR WARS: RETRO COLLECTION (HASBRO)

It was only just a few months ago that I was looking at the second series of Hasbro’s Star Wars: Retro Collection, which was about a year removed from its first series predecessor.  Those two were both based on The Mandalorian, but it seems Mando isn’t getting all of the Retro Collection love, and we don’t have to wait a whole year for the next round of them.  Hooray!  For years, it’s been widely agreed that, whatever your opinion of the Star Wars prequels may be, Ewan McGreggor’s Obi-Wan was the best part of them, and was also really under-utilized in the grand scheme of things.  With Ewan still being very much on board to do more with the role, Disney decided to give Obi-Wan his own show, bridging the gap between Revenge of the Sith and A New Hope, at least as far as Obi-Wan himself was concerned.  It started slow, but the show’s honestly the best instance of truly melding the aesthetics and tones of the Prequel Trilogy with those of the Original Trilogy, and was just far better than it had any right to be.  With its direct lead-in to ANH, it’s not a bad fit for the Retro style, and Hasbro jumped right in on it, with an assortment of six different characters from the show.  I’m kicking things off today with Obi-Wan himself!

THE FIGURE ITSELF

Obi-Wan Kenobi (Wandering Jedi) is the first of the six figures that make up the first (so far) Kenobi-themed series of Star Wars: Retro Collection, which is officially the fifth series within the wider Retro Collection set-up, counting the more direct re-issue sets.  The figure stands about 3 3/4 inches tall and he has 5 points of articulation.  He’s based on Obi-Wan’s “Wandering Jedi” look, which is what he wears for the first couple of episodes, while he’s doing his whole detective thing.  It’s the look that got the biggest marketing push up front, and also the one that I suppose best fits the overall aesthetic of the show, being consistent with his general looks from the prequels, while also still being a little more average and downtrodden.  To facilitate this, he gets an all-new sculpt, which, much like the rest of the line, is meant to evoke the vintage Kenner feel.  Though time-line wise, he’s from pre-ANH, the figure is clearly meant to evoke a post-Jedi era of the vintage line.  He’s a little less stilted in his posing, and the details are a little more organic.  He’s also lacking the built-in lightsaber of the original Obi-Wan, and gets a cloth robe that’s actually a robe, rather than the vinyl extended vest piece.  It’s an interesting concept of what an Obi-Wan in the vintage line might have been like post-ANH, if he’d gotten there.  I can definitely dig it.  I also enjoy that they’ve kept the working holster concept from Karga in the first series; someone was clearly very proud of that idea.  His paint work is rather on the drab side, as expected, but that’s not a bad thing.  In some ways, he feels like maybe he has just a little too much paint for proper accuracy to the style, but there’s obviously a bit of idealizing here, and I don’t think that’s so bad.  Obi-Wan is packed with his lightsaber (a recolored version of Bespin Luke’s from the vintage line), and a small blaster pistol.

THE ME HALF OF THE EQUATION

I really enjoyed Kenobi, and I found myself really drawn into how it handled the throw-back feel.  I had the chance to grab the first round of Black Series offerings for it, but for whatever reason, they just didn’t speak to me.  These guys, on the other hand, felt much more up my alley.  If I’m entirely honest, this Obi-Wan design is probably my least favorite of the three that have thus far been tapped for toy treatment, but it’s not a bad one, and it certainly translates to a pretty fun little figure.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3211: Iron Man Mark 47 & Happy Hogan

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

IRON MAN MARK 47 & HAPPY HOGAN

MARVEL MINIMATES

Tying the movie more closely into the universe that spawned it, Spider-Man: Homecoming leans a fair bit on Iron Man and one notable member of his supporting cast.  Not only does Peter work directly with Tony Stark on a number of occasions, but long-term Iron Man supporting cast member Harold “Happy” Hogan also gets his largest roles in the MCU as part of its Spider-Man trilogy.  As a Happy Hogan fan since way back when nobody knew who Happy Hogan was, I’m all about that.

THE FIGURES THEMSELVES

Iron Man Mark 47 and Happy Hogan were the TRU-exclusive set for the Spider-Man: Homecoming tie-in assortment of Marvel Minimates.  Due to weird licensing, the Spidey and non-Spidey characters supposedly couldn’t actually cross over in the tie-ins, so these two are isolated off on their own.  It’s not the worst thing, though, since, you know, the two of them do kind of tie together…even if Happy and Tony don’t actually interact while Tony’s in Iron Man mode.  Still, it’s really not that weird.  I’m making it weird.  I’ll stop.

IRON MAN MARK 47

Iron Man’s no stranger to Minimates, especially not when it comes to the MCU.  This was his 72nd Minimate overall and his 31st MCU-based released.  This one’s based on his briefly used suit from Homecoming, which was itself inspired, at least in terms of coloring, by the Ultimate version of the character from the comics.  The figure is based on the standard post-c3 base body, and as such is about 2 1/4 inches tall and he has 14 points of articulation.  He features an add-on for his chest plate, as well as unique pieces for his upper arms and hands.  All of the non-standard pieces were new to this figure, which is mostly surprising because this armor was really just a quick recolor of the Mark 46 in the movie, and the Mark 46 minimates all just used the Mark 42 tooling again.  These parts are a lot less clunky, though, and generally follow the sleeker design of the armor, so I generally appreciate them.  Additionally, this figure has the interesting change of not getting a helmet piece, and instead just using the standard head.  I’m not entirely sure why that was the way they went, but it’s not a terrible look.  The paint work on this guy is pretty decent.  The metallic red is super slick, and all of the line-work is nice and sharp.  The figure is packed with a flight stand and a clear display stand.

HAPPY HOGAN

Believe it or not, this isn’t the first Happy Hogan Minimate.  Heck, it’s not even the first one I’ve reviewed on the site.  In fact, with this release, I’ll have a review of every Happy Hogan figure there is.  That’s commitment.  Or crazy.  Or there’s only three of them, and it’s ultimately nothing.  Happy has add-on pieces for his hair, jacket, and tie.  The hair piece is re-used I’m pretty sure, but it’s a solid match for Favreau’s hair style in the movie.  The jacket and tie are the World of the Psychic Venkman jacket and Spirit tie combo that they rocked for a while there, which is a pretty good set-up.  The paint work includes an improved likeness from the IM2 release, as well as actual detailing for the belt, which is pretty nifty.  Happy is packed with a clear display stand, which isn’t a lot, but it’s something.

THE ME HALF OF THE EQUATION

I had to get kind of picky with what I was buying when these were first released, so I had to skip them, on the basis that I didn’t really need another Iron Man variant, and I already had one Happy Hogan.  But, then TRU was going under, and things were marked down, and I didn’t have this specific Happy Hogan, so, you know, I went for it.  Mark 47 is an improvement on the over designed nature of MCU Iron Men at the time, and I do really like that.  Happy is an improvement on the prior version, and I can definitely dig it.

#3210: Hawkman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HAWKMAN

BLACK ADAM (SPIN MASTER)

Despite both of their backstories heavily involving ancient Egypt, Hawkman and Black Adam haven’t had a ton of interacting over the years.  They were both present on the JSA for a bit, but otherwise, they kind of get steered clear of each other.  All that said, the fact that the do both have that ancient Egypt thing going (and despite the fact that the vagueness of “ancient Egypt” could very well place the two of them hundreds of years displaced from each other in the timeline) does make it *seem* like they should be a little bit related.  So, I guess it’s not an incredible surprise that Hawkman is one one of the JSA members joining Black Adam for his cinematic debut, portrayed in the film by actor Aldis Hodge.  As with the rest of the JSA team, he got toy treatment, and I’m looking at his figure today!

THE FIGURE ITSELF

Hawkman is another part of the first assortment of basic figures from Spin Master’s Black Adam line.  He’s available both as a single and packed alongside Black Adam with the big jet thing.  It appears the two figures are identical between the two releases.  The figure stands a little over 3 3/4 inches tall and has 17 points of articulation.  Of the three I’ve grabbed from this line, Hawkman’s definitely the most restricted on the articulation front.  He gets the new style of hips, which I’m still iffy on, and his shoulders also wind up being rather restricted by the armor.  I was also a little bummed to discover that the way that the wings peg into place doesn’t allow them to be posed in any way, but they are at the very least two separate pieces.  Hawkman’s sculpt is a unique one, based on his design.  Like yesterday’s Atom Smasher figure, he’s closer to the source material than the earlier Dr. Fate figure, due again to Hawkman’s costume appearing to be largely practical.  The design’s not a bad one, checking off most of the basic Hawkman requirements.  The chest armor’s something we’ve seen crop up on every live action Hawkman, so it’s hardly a shock here.  The only thing I’m not really into is the red pants, which just feel too far removed from his classic green ones.  That said, it’s a pretty minor thing, really.  The sculpt on this guy is alright.  Probably the weakest of the three I’ve looked at.  The details feel just a little bit softer this time around, and the helmet winds up looking a touch too goony.  He also just looks really scrawny compared to the others.  Aldis Hodge isn’t a huge guy, but I also don’t feel like he’s quite this small in the role.  The figure’s paint work is generally pretty basic.  Nothing too crazy, just standard color work for the most part.  It’s all fairly clean.  The eyes again fall into that goony territory, but it’s not awful.  Hawkman is packed with his usual mace, in silver, as well as axe, in gold.  Both are just pretty standard issue, which is fine by me, even if I do low-key kind of miss the goofier accessories like we saw with Atom Smasher.

THE ME HALF OF THE EQUATION

Fate and Atom Smasher are the only two from this line that I felt like I definitely had to have.  Hawkman’s fine and all, but I didn’t feel like I *needed* him.  When Max found me Atom Smasher, he also found this guy, and given the price point, it didn’t really make much sense to skip him.  He’s my least favorite of the three, but that doesn’t mean he’s bad.  In fact, I do kinda dig him.  And now I feel like I kinda have to buy the other two, just to round out the set.

#3209: Atom Smasher

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ATOM SMASHER

BLACK ADAM (SPIN MASTER)

This weekend sees the release of the latest DC live action film, the Dwayne “The Rock” Johnson-led Black Adam.  Warner Brothers is really banking on this one to net them some success, and they’ve certainly got the hype-machine running for it.  As I mentioned in my review of Doctor Fate, the film’s filling in Black Adam’s supporting cast with some of the Justice Society of America.  Noah Centineo plays Al Rothstein, aka Atom Smasher, who’s perhaps the JSA member with the closest ties to Black Adam himself, given their interwoven story during their shared time on the team during Jeff Johns’ run.  So, uh, let’s look at an Atom Smasher figure.

THE FIGURE ITSELF

Atom Smasher is part of the first assortment of basic figures from Spin Master’s Black Adam line. He and the rest of the non-Adam characters look to be lighter packed, so they’re a bit on the rarer side at the moment.  The figure stands about 3 3/4 inches tall and he has 17 points of articulation.  Atom Smasher’s articulation scheme matches the slightly modified one we saw on Fate.  The new hip set-up’s not quite as strong as the prior set-up they’d been using on their DC figures, but beyond that, it still works pretty respectably, especially given the price point.  Atom Smasher is another all-new sculpt, based on his film appearance.  Since Dr. Fate’s design was largely CGI for the movie, his figure wound up being rather loose on the specific details, but Atom Smasher sticks a little bit closer.  Really, the only difference here is the fingerless gloves, which are a carry over from an earlier design.  Atom Smasher’s movie design is honestly pretty great.  He’s got sleeves now, but it’s not that crazy a shift (Al had sleeves during his Nuklon days, so it’s not entirely out of place for the character).  Otherwise, it’s a pretty sleek adaptation of his comics look.  The details on the sculpt are a little bit on the softer side, but he’s pretty clean, and everything important is there.  The color work on Atom Smasher is bright and colorful, which is pretty fun.  The paint application is overall quite clean, and his symbol in particular is quite sharp in its detailing.  Atom Smasher is packed with two bulked up fist pieces, which aren’t quite the most accurate rendition of his size-changing ability, but it’s still a really fun gimmick.

THE ME HALF OF THE EQUATION

I really liked the Doctor Fate figure, and I’m down for a good Atom Smasher, so I was on the hunt for this one.  Fortunately, it was a pretty quick hunt, as Max was able to snag me one about a week or two after I found the Doctor Fate figure.  Like Fate, this guy’s just a ton of fun.  And, in doing a little bit of digging, I discovered that there’s also an Atom Smasher in Spin Master’s 12 inch line for the movie, so I guess now I’m gonna have to track that one down.