Category Archives: Reviews

#3091: Luke Skywalker and Tauntaun

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER AND TAUNTAUN

STAR WARS: POWER OF THE FORCE II (KENNER)

My last Power of the Force review before my great big gap in Power of the Force reviews was a creature set.  It was, specifically, the line’s largest creature set.  So, there’s quite literally no topping that.  I guess I’ll just go to the opposite side of the spectrum, and tackle one of the line’s smallest creature sets…which was also kinda borderline one of the line’s smallest vehicle sets, I guess, depending on how you look at it.  Can a living being be a vehicle?  And, what’s the over/under on how long the Tauntauns actually live, and where that places them on this whole vehicle scale?  Eh, I think I’m going to deep on this, you guys.  Let’s just get to the actual review.

THE FIGURES THEMSELVES

Luke Skywalker and Tauntaun were released in 1997 as part of the Power of the Force line’s creature-based sub-set, alongside Han and Jabba, the Sandtrooper and Dewback, and the Jawa and Ronto.  It was the smallest of the 1997 sets, though that didn’t mean it was any cheaper.  It was the only Empire-based creature set from the first year, and one of three overall in the sub-set (with this set effectively being split up and re-paired for the other two Empire sets the following year).

The Tauntaun was obviously the selling point of this set, having not been released in figure form since Kenner’s original Empire line.  While the vintage releases both more or less just averaged the appearances of Luke and Han’s Tauntauns, this one decidedly adapts Luke’s, so as to properly pair off with him in the set.  The figure stands about 4 1/2  inches tall and has 5 points of articulation.  The sculpt on this one was unique at the time, though most of it would later see re-use for the Han and Tauntaun pack the next year.  The sculpt is a pretty solid one. It presents a slightly more active Tauntaun than its vintage counterpart, which seems more appropriate for how we see them in the movie, where they’re frequently in motion.  The details match up pretty well with the movie prop, though it is in some ways sporting some slightly more idealized proportions than the real thing.  The detail work isn’t bad, with some passable texturing on the fur, as well as plenty of extra work going into the harness and survival kit on the main body.  The paint work on this release is mostly pretty good.  There’s a lot of attempts at proper accenting which *mostly* work.  The shading on the fur and the white flecks for snow both work out.  The odd yellow on the arms and legs, not so much.  I’m not entirely sure what the aim was on those, but it missed.  The Tauntaun’s only real accessory is its harness/lead, which clips into the mouth, and allows for Luke to more properly hold on.

It makes very little sense to release Luke’s Tauntaun and not a Luke to go with it, I suppose.  There’s of course the single Hoth Luke release, but he notably lacks in the “being able to actually sit on the Tauntaun” department.  This one aims to fix that.  He stands about 3 3/4 inches tall and has 8 points of articulation.  The extra articulation comes in the form of actual knee joints.  Pretty crazy to see those, especially on a figure of this era, but they did happen from time to time.  Check out his actual sitting action!  From the waist up, he’s effectively the same as his single-release counterpart, with one minor tweak to the left arm, so as to slightly reposition his hand.  Other than that, he’s the same, which is good from a consistency standpoint.  The paint work likewise is pretty close.  It’s solid work, with clean application, and all the major colors it needs.  Luke is packed with his blaster pistol.

THE ME HALF OF THE EQUATION

I had the single Hoth Luke as a kid, and never got a ton of use out of creatures, so I never had this one.  I remember it, especially the way it lingered for a bit, but it just never really called to me.  As I’m working on a full set, I’m picking up a lot of items that I passed on over the years.  In some cases, it’s not so thrilling, but sometimes it leads to me discovering some items I really like.  This one’s part of that latter category, and I’m glad I finally got around to picking one up.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3090: Invisible Woman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

INVISIBLE WOMAN

FANTASTIC FOUR (TOY BIZ)

“Caught in a bombardment of intense cosmic radiation while on an experimental space flight, Susan Richards found herself endowed with the power to become transparent at will, and the ability to form invisible force-fields of incredible durability. Now, as a member of the Fantastic Four, Sue battles to defend humanity as the elusive Invisible Woman!”

Very early in my reviewing days (we’re talking low teens here), I made my way through most of the first series of Toy Biz’s ’90s Fantastic Four line.  I neglected to review the standard version of the Thing at that time, mainly because I didn’t actually, you know, own one.  I fixed that back in 2017, and officially rounded out my reviews of Fantastic Four Series 1.  Of note, that means there are still no basic Invisible Woman and Human Torch reviews for the line, and that’s for a very specific reason: Toy Biz didn’t put them in Series 1.  For some reason, they felt that the best call for a line based on a team of four was to split the team between the first two assortments, meaning that the team was to be incomplete for the entirety of the gap between the two assortments.  With the line launching to tie-in with the cartoon, retailers weren’t particularly keen on Toy Biz’s plan to split the main team, and wanted them added to the first assortment.  With the molds not ready to go, Toy Biz had to hastily throw together stand-in versions of the other two members from molds already in production, making two figures that are *technically* part of Series 1, but also not advertised as such in any way what so ever.  I’m looking at the stand-in Invisible Woman today!

THE FIGURE ITSELF

Invisible Woman was, as noted above, technically released in Series 1 of Toy Biz’s Fantastic Four line, or at the very least adjacent to it.  Whatever the case, that means she hit shelves in 1994.  The figure stands about 5 inches tall and she has 6 points of articulation.  She doesn’t get neck or elbow movement, which put her a bit behind other figures of the same era, and generally makes her a little bit stiff.  In order to get Sue to the market, she was a complete re-use of the Iron Man line’s Julia Carpenter version of Spider-Woman.  All things considered, it’s actually not a bad option.  Julia’s costume details weren’t sculpted in, and the build and hairstyles of the two characters were similar enough to make it work.  The only real oddity to the re-use s the lack of sculpted eyes.  I mean, it’s not totally smooth there; there’s a slight indent and all.  However, Spider-Woman’s mask has Spidey-style eyes, not actual eyes, so Sue’s were just painted on.  It does look ever so slightly odd.  There’s an action feature worked it, which has a rather visible lever on the back.  It flips her arms upward, in a sort of a “flipping the table” fashion, which is kinda comedic, really.  Otherwise, it’s a decent sculpt, no matter who it was being used for.  The paint work does the heavy lifting on making this a convincing Sue Richards figure, and it does that alright.  Some of the edges are a bit on the fuzzy side, but the colors line up well with the other two team members from Series 1, and those eyes really don’t look as bad as they could.  Sue was packed with a stand and a small shield piece, both of which are molded in clear plastic.  Not a bad little display of her powers, and I do believe these were both actually unique parts, albeit much more simplistic than the actual figures, so thereby much more cheaply produced.

THE ME HALF OF THE EQUATION

This figure was a filler figure at best when it arrived at retail, and wasn’t designed to linger, so when I got into collecting figures (which was about around the time of Series 3 of the line), there weren’t any of this one still hanging around.  My first Sue was an old stock Marvel Super Heroes version, followed closely by the proper Series 2 release.  This one is a much more recent addition, picked up from an antique mall a few years ago.  Given how slap dash of a release this figure was, she’s surprisingly not a bad figure.  You could be forgiven for even thinking she was supposed to be this way.  She’s a good example of a solid quick-save from Toy Biz.  Her brother…well, he was a different story.  But Sue’s good, and that’s what matters here.

#3089: Ultra Magnus

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ULTRA MAGNUS

TRANSFORMERS: FALL OF CYBERTRON (HASBRO)

“Ultra Magnus is legendary among Autobots and Decepticons alike. The mere sight of his armored form charging into battle is more than enough to inspire his troops to victory, and his strength as a warrior is more than enough to break any Decepticon army.”

You know what I haven’t really reviewed a lot of lately?  Transformers.  As a whole, I’ve kinda slowed down on collecting them, so there’s a lot less of an influx of them waiting to get reviewed all the time, but I’ve still got a host of older ones I can fall back on.  I good chunk of those older figures are Ultra Magnus.  I know, you’re all very shocked by this crazy development that absolutely no one could have seen coming.  I’ve covered a good chunk of Ultra Magni here on the site, which has also allowed me to explore the various different eras of the toyline.  For today’s purposes, let’s discuss video games.  In 2010, a prequel game of sorts to the main Transformers storyline, titled War For Cybertron, was released, alongside a number of other tie-ins, including a handful of figures within Hasbro’s Transformers: Generations line.  In 2012, the game received a sequel in the form of Fall of Cybertron, which likewise got its own tie-ins, this time with the Generations line actually getting a proper re-titling, and the whole line focusing on adapting designs from the game.  Our boy Ultra Magnus found his way into this particular toyline, like a champ, and I’m taking a look at that particular figure today.

THE FIGURE ITSELF

Ultra Magnus was released in the third Deluxe Class assortment of the Fall of Cybertron line, which hit in 2013.  In his robot mode, the figure stands about 4 1/2 inches tall, and he has 19 workable points of articulation.  As a Deluxe Class release, this Ultra Magnus is notably quite small for a Magnus, especially in reference to the rest of the line which spawned him.  He’s just a little guy.  While the line was ostensibly based on the game designs, Magnus is actually not based on a game design at all.  Or, really anything really.  The question of scaling, as well as the nature of this design both stem from the fact that he’s largely a repaint of the FoC Optimus.  As such, he doesn’t get Magnus’s fully armored look, or the corresponding scale-up that would go along with it.  There does exist a third party figure which does a slightly closer job of replicating the game’s Magnus design (though even that’s based on concept art more than the actual game).  For the purposes of this release, Hasbro’s aim is clearly to make the most of what they have, so he gets an all-new, more Magnus-worthy head.  It’s a pretty nice sculpt, keeping the classic Magnus elements, but also melding things with the aesthetic of the game designs.  Additionally, the instructions also have you leave the smokestacks up in robot mode, simulating Magnus’s usual shoulder pylons.  Gotta have those shoulders for a true Magnus.  He also gets the new deco, of course.  It’s quite heavy on blue, which really helps to differentiate him from Optimus, and I really do dig the decision to go with that really stark white.  All of it results in a figure that may be small, but still looks very much like a Magnus.  Magnus was packed with the same blaster included with Optimus, as well as a big honkin’ sword.  Sword’s aren’t classically a Magnus thing, but it’s still a nifty piece.  It’s made up of three distinct parts, with the part that makes up the tip actually being the sword used by Optimus briefly within the game proper.

Ultra Magnus’s alt-mode is the same one that Prime had.  It’s a Cybertronian “truck,” which is decidedly less boxy than most Prime alt-modes, and by extension less boxy than most Magnus alt-modes as well.  It’s a different sort of design, but not a terrible one, as far as made-up sci-fi truck modes go.  The transformation sequence takes a little bit of doing, but it’s not too crazy either.  Given that it’s not really a Magnus design, it’s not the sort of thing I see myself getting much use out of personally, but it’s still nifty.  In vehicle mode, the blaster and sword can both be mounted to the figure, so as to not lose them or anything.

THE ME HALF OF THE EQUATION

I discovered this figure fairly early into my dive into the depths of older Magnus figures back in 2019, and was definitely interested.  As with most older Transformers, though, I don’t really have an undying need to actively search for them.  They just sort of come to me.  This one in a more literal sense than most.  He came into All Time as part of a trade, but it was one that Max had handled, so I knew nothing about him.  So, when they came in, Max just walked up to my desk and sat this guy in front of me, because, you know, Magnus and all.  It was a fairly pleasant little surprise.  As I said above, he’s small for a Magnus, and not really based on anything specific.  That said, I do really like him.  He feels kind of unique, and he’s honestly just a very fun little figure.

#3088: Nightwing

Posted by Ethan Wilson in Reviews and tagged with , , , ,

NIGHTWING

DC DELUXE COLLECTOR FIGURES (DC DIRECT)

Back in the early 2000s, everybody was starting to really try out the 1/6 scale game.  Hot Toys hadn’t quite overtaken the market, so there was still this sort of fledging “anyone could take this over” kind of vibe.  So, a lot of companies tried just that.  Among them was DC Direct, who decided that the best way to stand above the competition was to literally have their figures be taller than the competition, so they scaled everyone up by about an inch, with the argument that they were still 1/6 scale, the heroes were just supposed to be that much bigger than the average person.  Despite some odd notions right out of the gate, the line was a modest success, running from 2005 up through 2010.  Not a terrible run, all things considered.  They got a pretty decent swath of characters out there, which included a pretty solid focus on the Bat-Family.  Dick Grayson was present in both his Robin and Nightwing identities, the latter of which I’m going to be taking a look at today!

THE FIGURE ITSELF

Nightwing was the 14th release in DCD’s Deluxe Collector Figure line, hitting retail in the fall of 2007, during the line’s third year.  All of the figures were designed as standalone releases, but he hit right in the midst of a streak of Bat-related characters.  In a line that had certainly had a more classic focus, he was a decidedly more modern figure, sporting the character’s then-current design.  The figure stands about 13 1/4 inches tall (due to DCD’s insistence on that extra large scaling) and he has 30 points of articulation.

The figure’s head sculpt was the most notable new piece included here, as was pretty standard for the line.  The head sculpts for this line up to this point were, to be blunt, kind of ugly.  I mean, not terrible, but they were none of them particularly attractive people.  Nightwing marked a very earnest effort on DCD’s part to fix that issue.  Ultimately, the sculpt winds up looking a heck of a lot like Brad Pitt, with maybe a touch of Tom Cruise thrown in for good measure.  That certainly errs away from kind of ugly, and results in a not so terrible look for Dick Grayson.  The base sculpt is unmasked, with a mask piece that can clip into place, which sits surprisingly well on the face.  They did the same on Green Lantern, and I’ve always liked how well those turned out.  There are actually two masks included, one black and one blue, to cover the two looks he was shifting between so frequently at the time.  I personally really like the blue, but both work well.  In terms of paint work, it’s not as incredibly lifelike as Hot Toys, or anything, but it was about on par with most Sideshow offerings of the time.  It’s a little thickly applied, but other than that, it doesn’t look too bad.

Nightwing’s outfit is, predictably, mixed-media in its nature.  It’s made up of a bodysuit, glove cuffs, and boots.  Not a lot of pieces to this one, though that’s proper for the design.  The bodysuit is actually really nicely tailored, for as simple as it is, and the blue for his symbol really stands out well.  The boots (which are actual boots that slip over the feet) and glove cuffs are pleather pieces, with a plastic sculpted bit at the end, for the whatever they are things that he sometimes has on his costume.  They seem a tad bulky for his usual look, but ultimately work out alright.

The figure was built on what was the only available male base body at the time of his release.  It’s probably a touch bulky for Dick’s usual proportions, but it’s not truly atrocious, and he was certainly better served by this base body than most of the female figures were by the only female base body the line ever had.  It’s generally rather stiff in its movement, and notably can put its arms all the way down by the sides, but it does look pretty damn heroic, so I’ll give them that.

Nightwing got an alright selection of accessories, with two sets of hands (fists and bendy for posing to grip or gesture), his eskrima sticks, three batarangs, and a display stand.  The bendy hands are better than most of this type, but still not ideal for actually holding his weapons; actual gripping hands would have been better.  The display stand is notably really big and bulky and, due to how it’s designed, also kind of a risk for damaging the costume if you aren’t careful, which is kind of a shame.

THE ME HALF OF THE EQUATION

I had a handful of figures from this line when they were new, and while they were never figures I felt were amazingly high-end, I’ve always had a soft spot for them.  Nightwing was one I always wanted, but it wasn’t until after his release, as he changed quite a bit between prototype and release, and by then I had missed a lot of opportunities to get him.  Thankfully, I got another shot at him when a whole batch of the Bat-themed characters got traded into All Time a few weeks ago.  He’s a figure from a line that’s been abandoned, and with good reason.  DCD made a lot of weird choices with these figures, and they suffered for it.  However, taken in a vacuum, I do really, really like this figure.  He’s honestly a lot of fun, and just feels really true to the character.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3087: Gabriel “Barbecue” Kelly

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GABRIEL “BARBECUE” KELLY

G.I. JOE: CLASSIFIED SERIES (HASBRO)

A new G.I. Joe review?  In this economy?  Are you sure it’s legal?  I wouldn’t want to be accused of taking part in a rumble.  Or, you know, in this case, a Barbecue.  Right?  It’s funny, right?  Cuz he’s…you know…Barbecue?  And that’s a thing that you can take part in?  Much like the “rumble” to which the original quote referred? Am I getting too referential in my humor?  Yeah, probably.  Okay, fine, no more comedy for the whole rest of the review.  Just completely dry.  You know, like a Barbecue.  …I’ll see myself out.

THE FIGURE ITSELF

Gabriel “Barbecue” Kelly is figure 32 in the G.I. Joe: Classified Series line-up, and is the latest of the line’s Target-exclusive Cobra Island subset.  He gets to use his whole name, as, like Breaker and Beachhead, it’s not really possible for Hasbro to trademark a word as commonplace as “Barbecue.”  He started hitting retail around the same time as the Breaker and RAM Cycle pack, if not just a touch later.  There’s no full assortment set-up with him, so he’s presumably a solid case figure, much like Major Bludd was.  The figure stands 6 3/4 inches tall and he has 37 points of articulation…sort of.  The ab crunch is notably pretty restricted on this guy, so he doesn’t really have much use of that joint.  Beyond that, it’s pretty standard movement for the line, which is pretty solid.  Barbecue is built using Destro as a starting point, which serves to make him a little bigger and bulkier than most of his team mates, barring Roadblock.  It makes a fair bit of sense for a guy who’s covered head to toe in protective gear.  As with some of the other more recent figures, Barbecue is a rather close recreation of his original v1 figure.  There are obviously some updates, just to modernize him ever so slightly, and also fill in the visual space just a little bit more at the larger scale.  He gets a little more armoring on the shoulders and wrists, as well as a little more tactical gear around the middle.  The helmet is a particularly cool piece; it very faithful to the original design, while sharpening things up just a little bit, and also adding some smaller details, again to help with fill in that extra visual space.  Barbecue’s paint work is generally pretty basic; it matches up with his established color scheme quite well, and the application is all pretty sharp.  I wouldn’t mind seeing maybe a few other smaller details worked in, but he checks all of the basics off, which is still pretty solid.  Barbecue is packed with his classic backpack, hose attachment, and spray gun, as well as a smaller axe based on the one included with the original figure, and an all-new larger axe piece.  The smaller axe and spray gun are able to be holstered on the legs, and the larger axe has a spot on the backpack.  The ones on the legs work well, but the backpack one isn’t quite as practical.  That said, it’s nice to see them still try to give everything proper storage.

THE ME HALF OF THE EQUATION

I’ve effectively given up on the hunt when it comes to the Target-exclusives for this line, and I had no major need to have Barbecue in any sort of a rush, so I made no concerted effort to get one at retail.  I’d honestly almost forgotten he’d even been released, but then an almost complete run of Classified Series figures got traded in at work, so I had a much easier time of snagging one.  And who am I to argue with that?  So, boom, now I’ve got a Barbecue.  He’s pretty great.  He’s fairly by the numbers, but that’s not a bad thing, and he’s a pretty great update to the original.  All in all, not a bad offering at all, though again one that feels a little odd as an exclusive.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3086: Yoda

Posted by Ethan Wilson in Reviews and tagged with , , , ,

YODA

STAR WARS: POWER OF THE FORCE (HASRBO)

“Like the swamp planet Dagobah where he lived out his last years, the Jedi Master Yoda was shrouded in mystery. A diminutive, green-skinned creature, Yoda faithfully served the Galctic Republic as one of the 12 members of the Jedi Council. When the Emperor seized control of the galaxy, he ordered the elimination of all Jedi. In his darkest hour, Yoda, the last known Jedi Master, went into a life of hiding on Dagobah. When Luke Skywalker searched out Yoda for Jedi training on the advice of Obi-Wan Kenobi, the Jedi Master had reservations, but he chose to instruct young Skywalker in the ways of the Force.”

It’s May, and this is officially my first Power of the Force review of the year.  That’s a shockingly long stretch of not reviewing any of these guys.  And I didn’t even wait until Wednesday to start back up.  I mean, it’s prime Star Wars Day material, right?  Well, I like to break from the norms, I guess.  Or, you know, I just didn’t look terribly closely at the schedule before putting this one on this here Monday, two days before the fourth, and I couldn’t be bothered to rework my layout for it.  Besides, I wouldn’t have all this fantastic material for the intro that way.  And wouldn’t that just be such a terrible loss?  Right, so let’s have a look at a Yoda figure!

THE FIGURE ITSELF

Yoda was part of the first set of “Flashback Photo” Power of the Force figures.  The whole batch hit shelves at the end of 1998, as part of the promotional work leading up to the release of The Phantom Menace and its corresponding tie-in material in 1999.  This was the fourth Yoda in the line, though only the second from the main line releases, with the other two coming in the form of the Jedi Spirits Cinema Scene and the Dagobah Complete Galaxy set.  This would be the line’s final version of Yoda before it wrapped in early 2000.  The figure stands 2 inches tall and he has 4 points of articulation.  His sculpt is very similar to the first figure’s, with only minor mold changes to the body below the neck, mostly just to change the date stamp.  Otherwise, it’s virtually identical, for better or for worse.  It’s still goofy, but it’s fitting for the line.  His head sculpt marks the real changes for this release; the actual face and ears are more or less the same, but the hair is now actual rooted hair, rather than just sculpted.  It’s…honestly better than expected.  The concept feels like it would be too goofy, but it’s actually not half bad.  The paint work on this guy is similar to the first release, but stepped up just a little bit.  The eyes are a little sharper, and the accenting is a little more intensive, which is all pretty good, especially for this era of figure.  Yoda is packed with the same cane as the first release, as well as a boiling pot and a small candle.  Also included is the Flashback photo thing, which shows Yoda, and then you pull the thing, and it’s also Yoda, but, like, a little bit younger.

THE ME HALF OF THE EQUATION

I picked this guy up when he got traded into All Time Toys, fairly recently.  Not much of a thrilling story there, just kind of a “hey, there he is, I don’t have him, might as well grab him” sort of thing.  He’s not anything majorly unique or special, but it’s a pretty nice little figure, all things considered.  The rooted hair works better than expected, and the accessories are pretty nifty.

#3085: Elongated Man

Posted by Ethan Wilson in Reviews and tagged with , , ,

ELONGATED MAN

JLA (DC DIRECT)

“Using an extract of the plant Gingold, Ralph Dibney transformed his body into a malleable elastic state!”

In preparation for this review, I realized that I’ve only fleetingly discussed Ralph Dibney, aka the Elongated Man, here on the site, twice in reference to Plastic Man not being him, and once in reference to him being one of three characters for whom I own all of the action figures.  That’s it.  Well, as you may have guessed from the whole “I have all of his action figures” thing, I’m a rather big Elongated Man.  I’d go so far as to say he’s my favorite DC character.  The fact that he’s been so mistreated in modern times isn’t so great, but on the flip side, he’s done alright for himself in the realm of action figures in the last two decades.  Let’s start off what should be a lovely journey through Elongated Man figures with the very first one, released way back in 2004.  That’s right, this figure’s almost old enough to vote.

THE FIGURE ITSELF

Elongated Man was released in the second series of DC Direct’s JLA line.  After a debut assortment based on the team’s current (at the time) incarnation, the second series was inspired by the Satellite Era of the team.  As noted above, this marked Elongated Man’s first action figure (also true of his assortment-mate Adam Strange), though, like last week’s Kilowog figure, he would be quite shortly followed by a JLU release courtesy of Mattel.  The figure stands 7 1/2 inches tall with his neck extension in place (6 1/2 inches without it) and he has 12 points of articulation (11 if the extension is removed).  While not super articulated or anything, his movement scheme marks what became the standard for DCD figures around the time, which wasn’t really a bad one.  The only real downside to this particular figure, in relation to the others in the set, is that, due to how the neck extension works, he lacks the ball-jointed neck that the other three in the series got.  Instead, he’s just got a cut joint.  It’s not the end of the world, but does limit him a little bit.  Elongated Man’s sculpt was all-new, and it remained unique to this release.  It’s a pretty strong one, doing a respectable job of capturing that classic Ralph look.  I particularly like the head sculpt, goofy, cheesy grin, and all.  It just feels really appropriate for the character.  Elongated Man’s paint work is pretty decent.  It’s bright and colorful, which is the main effort for the design, so it works.  The application is clean, and I really like the glossy finish on the gloves and boots.  Elongated Man was packed with a JLA-labeled display stand, which was pretty standard for the time.

THE ME HALF OF THE EQUATION

This set of figures, as well as a number of other DCD figures, hit around Christmas time in 2004, so I got a handful of them as gifts that year.  I was far more fixated on the Atom figure at the time, so he wound up being the one from this series I got on Christmas morning.  Elongated Man I actually made a point of buying for myself the week after Christmas, using a gift card I’d gotten for Cosmic Comix during the holiday.  I remember being quite excited to get him at the time, and he was a favorite of mine for a while.  I like him enough that I even snagged a spare over the years, just because.  To date, he’s still my favorite, and is probably the best version of the character overall.

#3084: Mechagodzilla

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

MECHAGODZILLA

S.H. MONSTERARTS (BANDAI)

Just over a year ago, Godzilla Vs Kong premiered on HBO Max for streaming…and was also in theatres, I guess, but I was still avoiding them, so, you know, I wasn’t tracking such things.  I really enjoyed the movie, though, since it delivered on pretty much everything I had hoped for in a movie called “Godzilla Vs Kong.”  It had Godzilla, it had Kong, they were versus-ing, and, more importantly, it also had Mechagodzilla, Godzilla’s robot doppelganger, and my second favorite thing about the Godzilla franchise.  I picked up Playmates’ movie-inspired version of the character last year, and was pretty happy with that one, but you can always use just a little bit more Mechagodzilla, right?

THE FIGURE ITSELF

Mechagodzilla was released as part of Bandai’s S.H. Monsterarts line, hitting retail domestically at the end of February of this year.  He’s the third figure in the Godzilla Vs Kong subset, joining the Kong and Godzilla figures released last year to more closely tie-in with the movie.  The figure stands about 7 1/4 inches tall and he has, like, so much articulation.  Just many articulations, you guys.  The tail is almost entirely segmented into individual joints, and the pistons on the hips are designed to work.  He’s got an articulated jaw, he’s got butterfly shoulders.  About the only things missing are finger and toe movement, but at this size, that’s far from an issue.  They’d probably be at risk of breakage anyway.  As it stands, the current articulation scheme gives this guy a pretty solid range of motion.  The elbows are notably a little restricted, but beyond that, it’s impressive, especially that tail.  Mechagodzilla sports an all-new sculpt, based on his appearance in the movie.  Obviously, at this price-point, the sculpt is a lot more involved than the Playmates equivalent.  Everything is much sharper, and I do mean that literally; you gotta be careful with that tail.  Everything is very crisp, and convincingly mechanical, and there’s a ton of really great detail work on the inner mechanics of everything.  He’s also got a little bit of diecast metal worked into the legs and feet, which not only gives him a little extra heft, but also makes him very stable on his feet.  Mechagodzilla’s paint work isn’t too terribly involved, at least in terms of coloring, but it’s at least consistent.  The silver is all painted, which looks quite nice, and the handful of red accents do a good job of breaking things up just a little bit.  Mechagodzilla is light on the extras, but not completely without.  He gets two different sets of hands, one set open, the other closed, in order to add some extra variety to his posing.  It might have been nice to get a blast effect for his atomic breath, or possibly even some damaged parts, but ultimately, it’s nice that we got anything at all.

THE ME HALF OF THE EQUATION

I like Mechagodzilla a fair bit, but the nature of his release meant that I wasn’t expecting to have an easy time getting ahold of this one through my usual means.  I was also pretty content with the Playmates figure, which is surprisingly good for its price-point.  That said, when one of these rolled through All Time, and I was able to snag him for a pretty solid deal.  Coupled with a general slow down in what I’ve been picking up, he just felt like the right thing at the right time.  This figure’s really solid, but in like a subtle way.  There’s a lot going on with him, but he’s not overly showy.  He’s just a really cool figure, and I’m glad I picked him up.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3083: Bishop

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BISHOP

ALIENS: REACTION (SUPER 7)

Wow, I took such a gap between Aliens reviews, didn’t I?  Who knows how long it could be before I review another one?  Well, I mean, I knows.  I knows very well.  The answer is “no time at all,” by the way, because I’m totally doing another Aliens review today.  Is it an ill-advised move to group them together, knowing that it’s probably not super likely that I’ll have anything else Aliens-related to review next April 26th?  Probably.  But, I’ll risk it, especially if it means I get to get all meta with this intro.  I do like my meta intros.  Anyway, I looked at Hicks yesterday.  Today, I’m gonna look at Bishop.

THE FIGURE ITSELF

Bishop is another figure from Series 1 of Super 7’s Aliens ReAction line, the second of the six “human” figures, though I suppose “human” isn’t quite right for him.  He prefers the term “artificial person” himself.  The figure stands about 3 3/4 inches tall and he has 5 points of articulation.  Bishop is another all-new sculpt, which isn’t a terrible shock.  It’s a pretty cool sculpt, which captures his general look pretty well.  He’s not the most thrilling character when it comes to design, of course, but that’s just Bishop.  They make the best they can with what they have.  Honestly, they make more than the best, because this figure’s pretty clever.  See, while on the surface he’s just a basic Bishop, he gets a fun action feature.  You can split him apart at the middle, recreating his post-Queen attack damage.  There’s even a peg shaped like his gross android entrails.  It works surprisingly well, and the split’s not as glaringly obvious as you might think.  Sure, it’s clearly there, but it doesn’t jump right out at you.  Honestly, if it sat just a little bit better at the back, it’d be pretty much perfect.  Bishop’s paint work is fairly basic, but it fits the style well, and it captures all the main elements needed.  The application is pretty clean, with no real slop or bleed over, which is nice.  Bishop has no accessories, but the gimmick is the real extra.

THE ME HALF OF THE EQUATION

Hicks was my main want from this set, but Bishop here happened to be the other of the two ReAction figures that got traded into All Time, and I was hardly going to just leave this one on his own.  I gotta say, I was pleasantly surprised by this one.  Hicks was just kinda basic, but Bishop’s actually a quite clever figure.  He could have been very bland and boring, but he’s really fun instead.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3082: Hicks

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HICKS

ALIENS: REACTION FIGURES (SUPER 7)

Happy Alien Day every one!  I’ve missed it the last two years, by virtue of not having anything to review, but I actually made a concerted effort to not miss it this time around.  I like, purposely saved an item and everything.  Crazy, right?  So, today, I’m turning my sights on a line I haven’t looked at in quite a while, ReAction.  The brand actually has quite a history with the Alien franchise, since it was Super 7’s desire to release the cancelled Kenner Alien figures from 1979 that launched the whole project, and got them the attention of Funko, who blew the whole thing up to epic proportions and then proceeded to run it into the ground.  Super 7 wound up splitting the brand back off from Funko, and has done a lot to refocus it, which included bringing things back to that first license, and actually doing some follow-up figures based on the second movie.  That’s a big deal for me, over here, with the second one being my favorite movie and all.  So, you know what, let’s take a look at Hicks, because that’s what I’m about, son.

THE FIGURE ITSELF

Hicks (who is, notably, just “Hicks” on the package; not Corporal, not Dwayne, just Hicks) was released in Series 1 of Super 7’s Aliens ReAction line, as one of the six humans included in the line-up, hitting retail in mid-2020.  The figure stands about 3 3/4 inches tall and he has 5 points of articulation, in true replication of the intended style.   Hicks’ sculpt was all-new, and, quite surprisingly, entirely unique.  I had expected him to at least share some parts with Hudson, but the core figures are entirely different, which is actually pretty cool.  The sculpt is really good, albeit in the way that it’s supposed to be, which is, admittedly, kind of dated looking.  He’s definitely a sort of stripped down and simplified, almost Saturday morning cartoon version of the character, and it works pretty well.  Like, all of the major details of his outfit are there, just much more basic.  I like that they’ve also more accurately followed the progression of Kenner’s style than the Funko stuff did, so these figures, which would have hailed from the mid-80s had Kenner actually produced them, look more like the later end Star Wars stuff, or even the Raiders figures.  Hicks is actually a little more bulked up and sturdy in his build, which feels more appropriate.  Hicks’ paint work takes the general color palette of the character in the movie, and brightens it up a bit, as it would have been back then, as well as again simplifying things a bit.  It works pretty convincingly, and still sells the main look pretty convincingly.  Hicks is packed with a removable helmet (which is the same as the one included with Hudson), and his shotgun for close encounters.  While it’s a shame he doesn’t also get his pulse rifle, this does at least mean he’s got a unique weapon, since Hudson got the rifle packed with him.  I was also quite impressed by how well the helmet fit, while still sticking to the style.

THE ME HALF OF THE EQUATION

Though I’m a huge Aliens fan, I’ll admit that I had a hard time justifying these figures when they were announced, due to them being hit by Super 7’s price creep on the ReAction line as a whole.  I want to get more of them, but at $18 a piece, it’s a bit tricky, especially when there’s a whole assortment.  Hicks was the one I *really* wanted to track down, but I just never got around to it.  Then, he kind of tracked me down, I guess.  A Lego minifigure collection that came into All Time had exactly two ReAction figures bundled in with it, and, as luck would have it, Hicks was one of them.  He’s a very specific style of figure, but it’s one that I really like.  He goes really well with the Ripley I got from the Power Loader set, and I’m definitely cool with having another Hicks in my collection.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.