#3766: Wolverine

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

WOLVERINE

MARVEL LEGENDS (HASBRO)

“A broken and shame-fueled Logan reluctantly joins Deadpool’s side to fight for their survival — and a shot at redemption”

I discussed Deadpool & Wolverine very briefly when I reviewed the Legacy release Colossus, but didn’t really get into the whole film proper.  In general, my experience with the Deadpool movies was one that improved as they went along, going from not personally caring for the first film to being thoroughly entertained by the third.  In particular, the return of Hugh Jackman to the role of Wolverine after his departure in Logan was something I really enjoyed, especially since it was accompanied by him finally getting to wear the “yellow spandex” we were teased with 24 years prior.  And now, it’s time for the toys.

THE FIGURE ITSELF

Wolverine is part of the three figure Deadpool & Wolverine tie-in assortment of Marvel Legends.  He’s one of the two Wolverines included, this one being the more “standard” of the two, since he’s wearing his actual hero suit from the movie.  Or…well, it’s sort of an idealized version of it, since we don’t ever see the mask and the full suit on screen at the same time.  Look, it’s close enough.  The figure stands a little over 6 1/4 inches tall and he has 32 points of articulation.  The articulation’s interesting.  He gets a more unique style of shoulder articulation, which is sort of like a butterfly joint, but in all directions, being something more akin to the types of joints we see on McFarlane figures.  It’s a tighter connection, though, so it doesn’t feel like it’ll fall apart the same way.  It was a little tricky to get it posing at first, especially with the shoulder pads, but the range definitely improved after messing with it a bit.  He’s got a ball-jointed neck, with all the range that affords, but then a rather limited crunch and waist swivel on the torso, which feels…reductive?  Out dated?  It’s an all-new sculpt, so it was a choice for sure.  The sculpt is itself generally nice, but not without its drawbacks.  We get the full version of the suit, sleeves and all.  It’s a pretty good recreation of the film’s Astonishing-inspired suit, with its smaller details worked out pretty well, and plenty of texturing, so he looks as much like a basketball as he should.  He feels either too narrow at the shoulders or too wide at the hips; his proportions feel a little off either way.  Otherwise, things are pretty solid.  I do really love that masked head.  In terms of color work, he’s certainly garish, but in the way that he’s supposed to be, what with the clown suit and all.  Application is clean, perhaps a touch too clean, but clean.  Everything more or less goes where it should.  He would definitely benefit from at least a little accenting, but that’s not where Legends are these days.  He’s packed with two pairs of hands (fists with claws, and a clawless fist/gripping combo) and an unmasked head.  The gripping hand’s weird, since he doesn’t have any accessories to hold, but it gives you the option, I suppose.  The unmasked head’s as good a Jackman likeness as we’ve seen previously, so good on them for that.

THE ME HALF OF THE EQUATION

I was pretty excited for Deadpool & Wolverine.  It was really great to finally get to see Jackman in a proper Wolverine costume, and, if I’m honest, I was excited to see him get a better send off than Logan, a film that really didn’t work for me.  *ducks to avoid getting hit*  The yellow suit’s inclusion was certainly an interesting experiment, and it really worked in some ways, and not so much in others.  The figure sort of meets that assessment itself.  In both cases, I’m happy they gave it a go, and I enjoy the end result.  And, with this Wolverine and the previous Colossus, I can create my fantasy world where those two actually interacted the way they unfortunately didn’t in the movie.  And perhaps I’ll further that fantasy by hoping I might some day see more movie X-Men of a similar style.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3765: Green Lantern

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

GREEN LANTERN

DC UNIVERSE CLASSICS (MATTEL)

“While training in a flight simulator, test pilot Hal ‘Highball’ Jordan was suddenly transported to the crash site of an alien spacecraft. Recognizing Jordan as a man without fear, the injured alien passed to Jordan his green power ring and energy battery or ‘lantern’ which charged the ring. Jordan has since used the ring’s fantastic powers for good, distinguishing himself as one of the finest members of the elite intergalactic police force known as the Green Lantern Corps.”

Well, it hasn’t been a *whole* year since my last venture into DC Universe Classics, but it’s still been since April, which is a fair bit.  But, I’m feeling the need to dive back into it for a little bit.  Perhaps it’s some residual nostalgia from Friday’s Super Powers review, perhaps its that I snagged a stack of loose DCUC figures just before the end of the year.  Whatever the case, DCUC is a line that well and truly gripped me for most of its run, so I do have quite a good number of them.  Today, I’m delving into the earlier days of the line, with Earth’s second Green Lantern, Hal Jordan!

THE FIGURE ITSELF

Green Lantern was released in Series 3 of Mattel’s DC Universe Classics, which hit in the fall of 2007.  While this wasn’t Mattel’s first Hal Jordan (the infamous Holiday Hal from JLU hit in 2005), it was the first to go to retail.  He was the assortment’s heavy hitter, and was paired off with Sinestro for the hero/villain dynamic that headlined the first few assortments.  The figure stands 6 1/2 inches tall and has 23 points of articulation.  Hal was built on the medium male base body, which was first used by Black Manta in the prior series, along with a new head and right hand, all of them supplied by the Four Horsemen.  The head’s the real star piece, as it has to do the heavy lifting.  It’s a really strong, sort of quintessential Bronze Age Hal.  It’s not *exactly* Jose Garcia-Lopez, but the vibe is certainly quite similar, and it just reads well for the character.  It’s also very sharply defined, and avoids being too reliant on paint to sell it.  That said, the paint does alright selling it, and does do more of the heavy lifting on the rest of the figure.  GL’s one of those character’s where a fully painted suit isn’t too distracting, since it’s supposed to be sleek and one-piece anyway.  Application’s generally pretty clean, and there’s even som slight accenting on the green sections to highlight the sculpt.  At this point, I do have to address the one major oddity of this figure: the residue.  Yes, the first batch of Hals, which my copy hails from, have some sort of issue with the interaction of the plastic and the mold release, and when exposed to air for long periods of time, they develop a white filmy substance over the arms and legs.  Said substance wipes off with a damp cloth, with not notable harm to the figure, but it will re-appear over time, and he’ll have to be wiped again.  So, just remember to wipe your Hals periodically.  It’s not weird.  Don’t make it weird.  Mattel did a later re-release of Hal under the “All-Star” banner, which fixed this issue, as well as tweaking some of the paint/color choices.  Both versions included Hal’s power battery, which seems to be an oddly bright green; I’ve always envisioned it being more on par with the color of his suit, but it’s more of a lime green here.  The Series 3 release also got a piece to the Solomon Grundy Collect-N-Connect, while the “All-Star” version got a stand.

THE ME HALF OF THE EQUATION

Hal’s the figure that sold me on DCUC as a while.  I’d been a solid DC Direct devotee, and had been buying pretty much every Hal they’d put out, looking for that perfect version.  This one came along and blew them all away.  I was so excited by the prototype shots of this guy, that I bought what I could find of the first two series solely based on the fact that he was coming.  This set hit right around Baltimore Comic Con in 2007, so he was at the very top of my list of things to look out for.  I snagged him almost immediately after making it through the door, and was very happy and content.  Almost 20 years later, I’m still quite happy and content, even if it does involve the periodic wiping of the Hal.  I did manage to snag the later release as well, so I’ve got one without need of wiping, which is well enough.  In general, though, this Hal is a figure that makes me quite happy.

#3764: Golden Pharaoh

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GOLDEN PHARAOH

SUPER POWERS (KENNER)

“British archaeologist Ashley Halberstam was working on a dig in Giza, Egypt, when he was struck by a mystical bolt of energy that emanated from a lab run by the New Gods. This bolt of energy Transformed Halberstam, unleashing the latent energies inherent in his body and turning him into Golden Pharaoh. Golden Pharaoh uses his uncanny pyramid power for the forces of good.”

Something that’s been a fixture of my Christmases for a good long while is Kenner’s Super Powers. Somewhat unique about last year was how many Super Powers figures I got between my two Christmases, thanks to McFarlane actually really stepping up their game with their continuation. But, I’m going back to the proper Kenner stuff for the day. And what a proper Kenner thing it is, since it’s one of the two characters they made up for the line, Golden Pharaoh! Who’s Golden Pharaoh? Well, he got that little bio and…that’s actually really it, since he never made the jump to the comics outside of some tie-ins. He did get a DCUC figure, which I’ve reviewed previously, but now I’m going back to the beginning!

THE FIGURE ITSELF

Golden Pharaoh was part of Super Powers‘s third abs final assortment, released in 1986. Obviously, this was his first figure, and like his fellow Kenner creation Cyclotron from the same year, it would be his only figure until DCUC. The figure stands about 4 1/2 inches tall and has 7 points of articulation.  While the general set-up of his articulation is pretty standard for the line, the positioning of his arms, coupled with the nature of his costume design with the wings and all, limits his range on the shoulders a fair bit.  The neck is also rather stiff on mine, but that might also be linked to the age of the translucent plastic, and I’m certainly not gonna force it.  Pharaoh’s sculpt was unique, based on Jack Kirby’s design work for the character.  It’s certainly a unique look, and while the sculpt proper is a little soft in some spots, it generally works out alright.  He’s got a rather basic color scheme.  It’s certainly an odd of assortment of colors, and notably no actual gold (something that was ultimately addressed by the DCUC figure).  I do dig the translucent purple on the torso, though.  Golden Pharaoh was packed with a staff, which he can hold in his right hand.  He also had a “Power Action Soaring” feature, which pops his arms upward when his legs are squeezed.

THE ME HALF OF THE EQUATION

Golden Pharaoh was, as has been the trend for the last few years, my “big” Christmas gift from my parents.  He’s certainly one of the line’s more oddball offerings, and one that I don’t know that I really, truly imagined owning at the outset of collecting this line.  He just seemed like one of those far away things.  On his own, he’s perhaps not the most impressive, and could use maybe a bit more flair.  I have to wonder how much cooler he’d have been if he’d maybe been vac metalized gold, but ultimately, he’s not a bad little figure.  And here I am, three figures away from finishing up Super Powers.  Which feels increasingly odd.

#3763: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN AMERICA

MARVEL LEGENDS (HASBRO)

“When the Avengers, the X-Men, and the Fantastic Four are transported to a strange planet, Captain America is chosen to take the lead in fighting the ultimate war!”

As much as it’s become something of a rarity these days, since I tend to buy most Marvel Legends for myself, there was a time when Legends invariably made up a large component of what I got for Christmas.  We’re, of course, going largely back to the Toy Biz days, but still.  Thanks to a new set of figures that came in right under the wire on last year’s deliveries, the timing astoundingly lined-up for that to happen again.  2024 marked the 40th anniversary of Secret Wars, an event designed to sell toys, so what better way to mark the occasion than by selling some more toys?  It gives Hasbro a good excuse to re-release some heavy hitters, like, for instance, Captain America!

THE FIGURE ITSELF

Captain America is part of the six-figure “Secret Wars” anniversary assortment of Marvel Legends, which hit right at the end of last year.  He’s joined by the similarly heavy-hitter-y Wolverine, Spider-Man, and Iron Man, as well as the all-new but still very much important to the actual event Beyonder and Titania.  They’re all patterned on the vintage Mattel line, with replica retro card backs, and a few of the gimmicks as well.  The figure stands 6 1/2 inches tall and he has 32 points of articulation.  Structurally, this figure’s the same kind of “Ship of Theseus” set-up as the Renew Your Vows Spider-Man, just for Cap.  His oldest parts are from the Grim Reaper body, who was reworked into Cap Wolf.  Cap Wolf got upgraded to 80th Anniversary Cap, who was also used for the 20th Anniversary Series 1 Cap.  This figure further upgrades the body by adding pinless construction on the arms and legs, as well making the glove cuffs a separate piece, making for a cleaner assembly.  In general, it takes a base body that was already quite strong, and gives it that winning edge, making this the best Cap base body to date.  Cap gets two new head sculpts, both sculpted by Paul Harding, who handled the heads on the 20th Cap.  According to him, all four heads were sculpted at the same time, and these ones were saved for later.  This time around, he’s got one smiling head, and one gritting his teeth.  They’re both quite nice, and just as solid as the prior two.  Personally, I think the smiling one’s my favorite of the bunch, but I like the versatility in general.  There’s only one drawback, and that’s to do with the colors.  This figure is notably NOT the same color palette as the 20th release, which in a vacuum isn’t terrible.  Clearly, they’re trying to emulate the Mattel colors more directly, right down to the reversed stripe pattern on the mid-section.  The blue in particular is a bit warmer, and I do honestly prefer that.  The biggest trouble with it, however, is that it means you can’t swap the different expressions between this guy and the 20th, so there’s no neutral expression for this figure, and you can go more intense with the 20th.  It’s not the end of the world, but it’s a little more limiting than I’d expected.  In terms of actual application, he’s generally alright.  The glove construction in particular clears up the problem with messy edges on the gloves that we saw with the earlier mold.  On my figure, both heads do have some slight issues, with part of the A being scraped off on the happy head, and a weird flecking of flesh tone paint on the angry head.  Neither is a major issue, but it’s frustrating.  Cap is packed with three sets of hands, in fists, gripping, and flat/pointing.  The gripping are an interesting choice, and I assume they’re just there to reference the vintage figure?  I do miss the open gesture hands from the 20th, but I always miss the open gesture hands when they get left out, honestly.  He gets two different shields, and neither of them is standard, continuing the bit of this updated Cap mold not getting standard shields, and also the gag of the vintage Secret Wars Cap not getting a standard one either.  He’s got a throwback vintage shield, complete with the lenticular gimmick, as well as a shattered version of the standard shield, which even includes the broken off pieces.

THE ME HALF OF THE EQUATION

I love the 20th Cap, but even when he was new, I was aware there would be another on the horizon.  This one didn’t surprise me.  I ended up getting him as a gift from Max, who sniped me purchasing him on the basis that he didn’t know exactly what to get me, and knew I wouldn’t have the new Cap that just came in.  It’s a solid observation.  I’ve gotten something out of every successive iteration of the Caps that led to this version of the mold, and this one is certainly the best thus far.  Sure, the color change is frustrating, and we still don’t have a proper undamaged classic shield for him, so I know there’s another one on the horizon with all the heads and a repainted Ultimate shield.  And, I’ll buy that one too, because I’m weak.  But, until then, I do really, really like this one.

#3762: Space Suit – Light Blue Version

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPACE SUIT — LIGHT BLUE VERSION

2001: A SPACE ODYSSEY MAFEX (MEDICOM TOY)

Welcome back, everybody!  I hope you guys enjoyed…my holiday break?  Well, I did, so there’s that.  We’re officially post-Christmas, so that means I get to kick off the year with some Christmas-gift-related reviews.  I kicked things off last year with a MAFEX review, and I’m duplicating that effort this year.  Not exactly by design, but here we are nonetheless.  It is, however, quite a different direction in terms of branding.  Rather than DC Comics, we are instead turning to 2001…not the year, mind you, but the movie.  I can understand your confusion.  Kubrick films are generally a rarity in merchandising, especially action figures, but we’ve had a few goes at 2001.  Medicom released a small selection of the film’s distinctive space suits in a variety of colors under the MAFEX banner, and I’m looking at one of those today.

THE FIGURE ITSELF

The Light Blue Space Suit is figure 090 in Medicom’s MAFEX line-up.  It is numerically the last of the four colored suits to be released, hitting in 2019.  The blue suit is a unique oddity amongst the four, as it is the only suit not to be used at all within the film’s run.  The orange and yellow get used by Bowman and Poole respectively, and the helmet and gloves from the green suit are used by Bowman following his space walk.  The blue suit simply hangs next to Bowman and Poole’s suits.  Waiting.  Watching.  Plotting.  Reading lips.  No, wait, that’s HAL.  My mistake.  The figure stands 6 1/2 inches tall and he has 34 points of articulation.  As these are 1/12 scale figures, the suit is about an inch shorter than the Super 7 Bowman.  Its mold is shared with the other three suits, which is sensible.  The sculpt is crisp and clean, and the figure is easy to pose, and doesn’t feel too fragile.  The helmet is affixed with no movement of its own, which initially surprised me, but is true to the design, so it makes sense.  The color work is pretty solid for the most part.  The blue is a good match for what’s seen on screen, and the smaller detail work on the instruments and patches is quite impressive.  The visor is completely blacked out, as was the case for all of these.  It hides the face, or in the case of this figure the lack of a face, allowing all four to share the same mold more easily, and simplifying the construction somewhat.  The figure is packed with three sets of hands and a display stand.  While the suit just sits there and really just needs the relaxed hands, the additional ones are fun for theoretical posing, and the display stand assists with that.

THE ME HALF OF THE EQUATION

With a lot of the Kubrick stuff, there winds up being something of a back and forth on licensing, and I seem to recall that being the case with these guys, I think?  I don’t know, but I do know that they all wound up going under the radar for me when they hit, so I didn’t snag any of them.  I honestly wasn’t super picky on color, but I did sort of pull for the blue, thanks to its aforementioned uniqueness.  So, it was rather lucky for me that this was the one that ended up coming through work, and even more lucky for me that it wound up being my Christmas gift from the company.  It’s a very nice piece.  Certainly a different breed of figure from the Super 7 stuff, but I still like both offerings for what they are.  Ultimately, this one is quite fun.  Now I just need to resist the urge to own all of the different colors.

Christmas Break!

Posted by Ethan Wilson in General

Greetings dear readers! I may not have been hit by the Christmas bug this year, but I’ve decided that it’s nice to take a break from time to time, so let’s make it an annual thing!  I’ll be taking off from now til the start of the new year, so thanks for reading and I’ll see you all after the new year!

-Ethan

#3761: Purge Stormtrooper – Holiday Edition

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

PURGE STORMTROOPER — HOLIDAY EDITION

STAR WARS: THE BLACK SERIES (HASBRO)

Happy Chrithmas. Its Chrisman. Merry Crisis. Merry Chrysler.  Do you get it?  Like the Vine thing?  Ah, what a timely reference, right?  I’m hip and with it and I know how to get home with the downies.  No, wait, that’s that right.  Ah, it’s Christmas, so I’m just gonna give into the hokey not coolness.  Let’s be all festive and cheerful.  Anyway, here’s another Star Wars guy, named after the fact that he purges members of a religious sect.  Yay for festive cheer?  Anyway, here’s the Purge Trooper, I guess.

THE FIGURE ITSELF

The Holiday Edition Purge Stormtrooper is figure 5 out of 6 from the 2023 Holiday line-up for Black Series.  He, like the Jawa I looked at last year, was a Fan Channel release.  He was *supposed* to be out before the holiday….but he *just* missed it.  Oh well.  The figure stands 6 1/4 inches tall and he has 29 points of articulation.  I haven’t personally messed with the Purge Stormtrooper mold yet, since I didn’t snag any of the earlier runs.  It’s largely just the old style Clone mold again, so it does what it does, but the head’s new, he’s got a pauldron, and the belt’s been tweaked.  He’s also got a cloth kama piece.  In general, he’s got the same pluses and minuses as the Clone I looked at yesterday, so he looks good, but posing can be a bit iffy.  The decos for last year’s run were generally a bit less “just vomit some holiday colors on the figure” so the Purge Trooper is a little more focused in his design, directly referencing the classic Nutcracker design.  Honestly, it works quite well with this particular mold.  I’m not sure it hits quite as well as the Santa Jawa, but it’s solid.  I especially like how they made the jaw work within the helmet design’s mouth piece.  The Purge Trooper gets a blaster rifle in a deco that matches him, as well as a re-decoed Mouse Droid.  It’s a weird deco on the droid, but I think it’s supposed to be a nut?  It doesn’t quite read right.  Also, doing a Nutcracker-themed trooper deco, packing him with a Mouse Droid, and not going for some sort of, oh, I don’t know, mouse themed deco seems like a missed opportunity.  Like, it’s right there, guys.  A mouse is literally the antagonist of the story, guys.

THE ME HALF OF THE EQUATION

I got this guy brand new last year, right after the holiday.  Admittedly, it felt a tad silly, but there it was.  I kept him sealed all year, waiting to open him up when it came time to decorate.  While I can’t say the Purge Trooper design and concept is one I really love, I do like the angle they took for this particular release, at least for the main figure.  I do wish they’d picked a better deco for the droid, but at the same time, I’m just kinda glad to get the mold.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3760: Clone Trooper – Holiday Edition

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CLONE TROOPER — HOLIDAY EDITION

STAR WARS: THE BLACK SERIES (HASBRO)

Twas the night—er, day before Christmas, and all through the house, Ethan was realizing he hadn’t actually had a review go live on Christmas Eve in two years.  I didn’t used to do the themed review until the actual day, but last year I had two new Star Wars holiday-themed figures, so I did both days…well, sort of.  Anyway, there aren’t new holiday Black Series figures this year, but I’ve wound up with some old ones to fall back on, so let’s do that!  Here’s another Clone Trooper, because these guys are just everywhere.

THE FIGURE ITSELF

The Holiday Edition Clone Trooper was part of the debut run of Holiday Star Wars: The Black Series figures in 2020.  He was exclusive to GameStop and was figure 5 in the set of 5.  The figure stands just over 6 inches tall and he has 29 points of articulation.  This guy is using the older style Clone base body, with the Phase II-style helmet.  These figures were released after the introduction of the newer style of Clone, but presumably the exclusive offerings had to be turned around at a quicker pace, hence the older molds.  The Walgreens Clone Lieutenant did the same thing, and he was from right around the same point.  The mold certainly has its limitations, but at the same time, it was solid for its time, and still looks pretty decent.  As with all of these figures, the deco is what’s really selling him.  It’s appropriately tacky, with sort of an ugly Christmas sweater set-up on the torso armor.  Apart from the fact that he’s a Clone Trooper who inexplicably has TIE Fighters and a Death Star on his sweater, it’s a nifty idea, and honestly pretty solidly executed.  Beyond that, he’s just got a lot of red and green, as well as the striped stockings look that’s been recurrent with this sub-line. The stripes are a bit inconsistent, but everything else is quite sharp.  The first year of holiday figures didn’t do any guns (amusing, since they were all some variation of trooper), but went instead with melee weaponry.  This guy gets the Knight of Ren’s sickle thing painted up like a candy cane.  I don’t know that it quite lands the way it was intended to, but it’s not terrible.  He’s also packed with a porg, who’s got a little tiny scarf painted on, and I just love that.

THE ME HALF OF THE EQUATION

In 2020, I was very definitely not going out and hunting exclusives, so I didn’t get any of these the first year.  This was the one from that batch I wanted the most, but I just never came across it.  Earlier this year, however, a set of them were traded in at All Time and I was able to snag a few of them, this guy included.  They continue to be exceptionally hokey, but I sure do love me some hokey decorations.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3759: Archangel

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ARCHANGEL

X-MEN (TOY BIZ)

“Rich playboy Warren Worthington III was the X-Men’s Angel until the day that he was captured and transformed into one of the horsemen of Apocalypse. A darker reflection of his previous self, Archangel now possessed wings made of metal – wings that he could barely control, wings that fired paralyzing “feathers” at friends as well as enemies. Constantly battling his dark side, Archangel longed to regain the goodness that he once stood for. Recently finding kinship with the X-Men’s Psylocke, Archangel has come to terms with his transformation, and has started to rebuild the life he thought he had lost forever!”

Do you guys like X-Men?  I heard somewhere that you might.  I mean, I do.  And it’s my site.  So, you know, it’s ultimately my call, right?  Amusingly, I was actually not gonna do an X-themed review today, but then I thought better of it.  Yay for me.  And here, on the day before the day before X-Mas, I’m reviewing an X-Man named Archangel, which feels somewhat appropriate, right?  Sort of that “lo, an angel of Xavier appear and they were sore afraid” kinda vibe?  Of course, it’s just Warren Worthington, and he’s kind of a push over prep school guy, so, maybe not “sore afraid.”  I’m getting sore afraid of this intro going any longer, if I’m honest.

THE FIGURE ITSELF

Archangel is from the Battle Brigade Series of Toy Biz’s X-Men line, which was the 14th assortment.  I’ve already reviewed the standard version of this figure, but he, like all of the figures in this particular line-up, also had a color variant.  While the standard was in his white and blue, Neal Adams-inspired costume, this one’s in the Champions-inspired version.  The figure stands 5 1/4 inches tall and he has 9 points of articulation.  He’s the exact same mold as the standard version, which was itself largely re-used from the “Invasion” series release.  It’s still a little bulky for Warren, and we’re just ignoring the sculpted wrist bands.  Still, it’s not too terrible.  I do rather like this particular head sculpt, especially for this version of Warren.  The wings remain a bit floppy as well, but they do at least look the part.  In terms of paint work, this guy’s got the same layout as the standard, but with red in place of the blue.  It’s a little rough on some of the edges, but otherwise looks pretty solid.  Like the standard and Invasion releases, this guy gets no accessories.  He’s still got the wing-flapping action, though, which remains pretty nifty.

THE ME HALF OF THE EQUATION

This guy is actually quite a recent acquisition for me.  I’ve been wanting one since shortly after I got my original, so it’s been a good 20 years, but in all that time, I’ve never seen the variant in person.  I was at Ocean City Comic Con last weekend, and found a booth that had exactly one sealed Toy Biz X-Men figure in it, which happened to be this guy.  I was honestly pretty excited.  He’s obviously not super different from the regular release, but the color change-up is enough to give him a pretty unique look.  It certainly helps that I liked the standard figure so much in the first place.

#3758: Commander Gree

Posted by Ethan Wilson in Reviews and tagged with , , , ,

COMMANDER GREE

STAR WARS: REVENGE OF THE SITH (HASBRO)

“On the planet of Kashyyyk, Commander Gree serves Jedi Master Yoda and helps the Wookiees fight the invading Separatists. When the secret Order 66 is issued, Commander Gree suddenly turns on the Jedi, but Yoda senses his betrayal and quickly eliminates him.”

I am nothing if not willing to go through with the bit.  The bit in this case, of course, is doing a weekly Star Wars review based on one of the prequel movie tie-in lines, in order.  I did Phantom Menace and Attack of the Clones, so now it’s time to jump to Revenge of the Sith.  While I have nostalgic attachment to all of the prequels, and am willing to discuss my enjoyment of the first two…well, it’s not the worst of the prequels in terms of quality, but I think it’s the prequel I’ve always enjoyed the least, which is, of course, a big contrast, I think, from most people.  Look, I think it’s big dumb fun, but it’s also a real mess.  Honestly, that’s a sentence that describes the third entry in every Star Wars trilogy, so there you have it.  It does have cool clones, though, and in particular I’ve always been fond of Commander Gree.

THE FIGURE ITSELF

Commander Gree was figure 59 in the Star Wars: Revenge of the Sith tie-in line.  He was one of the late-run figures for the year, hitting retail right before the holidays, which also made him quite difficult to get.  the figure stands 3 3/4 inches tall and he has 13 points of articulation.  Gree made use of the second Phase II Clone Trooper from the line, dubbed “Super-Articulated” at the time.  It was a solid sculpt, and remained the best version of this style of clone for quite a ways after this line, and was re-used to a crazy degree, as you would well expect.  Gree is himself not too far off the standard armor, so it generally works just fine for him.  The main selling point here was the new deco for Gree.  Technically, it’s not entirely accurate to his on-screen appearance, specifically dealing with the details on the helmet, but it reads well enough, and it’s honestly fun and got a sufficient bit of pop to it, so I dig it.  There were two possible shades of green for his visor, darker and lighter.  Mine’s the lighter, which is the one I prefer, even if it’s the less accurate of the two.  Gree is packed with a standard blaster, a removable antenna, and a large missile-launcher-style blaster.  The launcher is laughably silly, but I can again dig it.

THE ME HALF OF THE EQUATION

I recall finding both this guy and Bly in store shortly before Christmas when they hit, but it being so close to the holiday, I couldn’t get them, and my parents weren’t able to get them for me before the holiday craze wiped them out.  I didn’t have to wait too long for him, fortunately.  I recall him being a late winter purchase from Cosmic Comix, who had managed to get in some relatively recent figures and a reasonable enough price post-holidays.  Gree was my favorite clone from the film, and subsequently my favorite figure from this line, so he survived a good number of collection purges.  He honestly holds up really well.