#0715: Kill Bill Deadly Assassins

Posted by Ethan Wilson in Reviews and tagged with , ,

BEATRIX KIDDI, VERNITA GREEN, BUDD, & ELLE DRIVER

KILL BILL MINIMATES

KillBill4a

“That woman deserves her revenge and we deserve to die. But then again, so does she. So, I guess we’ll just see. Won’t we?”

–Budd

One can hardly argue that DST isn’t diverse when it comes to what licenses are picked for Minimates. Who would have though you could have Spider-Man, Batman, Captain Kirk, Madonna, Clint Eastwood, and the Deadly Viper Assassination Squad all in the same scale and style? Today’s review pertains specifically to that last thing, the Deadly Viper Assassination Squad, who hail from Quentin Tarantino’s Kill Bill. We got the Bride and O-Ren in the first Kill Bill boxed set, but it took us another three sets to get the remaining three members of the Squad, along with another version of the film’s main character, Beatrix Kiddo.

THE FIGURES THEMSELVES

These figures make up the fourth, and seemingly final, set in the Kill Bill Minimates line, titled the Deadly Assassins Set.

BEATRIX KIDDO

KillBill4fBeatrix Kiddo, aka the Black Mamba, aka The Bride (spoilers, I guess), makes her third appearance as a Minimate. That’s not a huge shock, given that she’s the central character of the two films. This figure presents her in her look from the first half of Vol. 2, after she digs her way out of the coffin in which Budd buries her. She stands about 2 ½ inches tall and has the usual 14 points of articulation. Beatrix’s only add-on piece is her hair, which is re-used from the “House of the Blue Leaves” version of the Bride. It works well for both looks, and it does a nice job of translating Uma Thurman’s hair from the movie. The paint on Beatrix is very nicely handled, and is perhaps some of the best paintwork I’ve seen on a ‘mate in a while. The likeness on the face appears to be the same as the one on The Bride. It was a good likeness there and it’s a good likeness here. She’s has some very nice work on the detail lines of her torso and waist, outlining her shirt and belt very well. What takes the paint on this figure to the next level is the dirt and blood stains, which caver just about every surface of the figure. That’s attention to detail! Beatrix is armed with her Hattori Hanzo sword and matching scabbard, which are the same as those included with the last two Beatrixes, right down to the scabbard being upside down. She also includes the pine box that Budd buries her in, which a fun piece, that’s kind of key to this look, as well as a flashlight, which goes with the box, and the requisite clear display stand.

VERNITA GREEN

KillBill4dVernita Green, aka Copperhead, is the first of the Deadly Viper Assassination Squad we meet (after Beatrix, of course). She ends up being the most minor of the group, but she’s still important, serving as a counterpoint for Beatrix. She’s presented here in her “housewife” clothes from her fight scene with Beatrix in Vol. 1. Like Beatrix, Vernita only has one sculpted add-on piece: her hair. The piece is re-used from Marvel Minimates Series 46’s Aunt May. It’s not a perfect match for Vernita’s hair, but it works alright. Vernita’s paint is quite nicely handled. The face looks a fair bit like Vivica Fox, so you can tell who it’s supposed to be. The hoodie is the best part. It’s nice and bright, and there’s a full array of detail on both sides of the torso block. She’s also got some blood splatters on her chest and face, which line up correctly with her injuries from the film and add a little bit of extra “pop” to the figure. Vernita is packed with a kitchen knife and a clear display stand. The knife is certainly appropriate, considering she’s the “Deadliest woman on the planet with a knife” and all, but it’s a shame that she didn’t get the planned gun in the cereal box accessory. That would have been unique.

BUDD

KillBill4cBudd, aka Sidewinder, is the lone male member of the Deadly Viper Assassination Squad. He’s also the younger brother of Bill, the guy Beatrix wants to…uhh…kill. He doesn’t really show up until Vol. 2, but he makes a pretty big impact. Budd’s figure represents him in his look from the scenes at his day job, working as a bouncer. Technically he doesn’t run into Beatrix while dressed like this, but it’s a decent enough summation of his various looks from Vol. 2 that it’s not really a big deal. He features add-on parts for his hat/hair and the bottom portion of his shirt, as well as non-standard feet. The bottom of the shirt is a piece we’ve seen many times before, and it works for what it is. The boots originally showed up on The Good, The Bad, and The Ugly’s Tuco. They’re just basic cowboy boots, and they match up with what Budd wears in the film. Budd’s hat is a new piece, and it does a nice job of translating his hat from the film into the ‘mate style. The hair seems a bit too flared at the bottom, but other than that it’s a nice KillBill4bpiece. The paint is pretty decent, if perhaps not as clean as the last two figures. The colors are nice and bold, and the lines are all pretty crisp. The face is a good likeness of Michael Madsen, which I’m sure will come in handy for people hoping to QC some of his other film roles. The real issue with the paint is slop. There’s a bit of it around the edges of the hat, and the figure’s neck is mostly blue, when it should be flesh-toned. Budd is armed with a shotgun and a shovel, and also comes packed with a clear display stand. The shotgun isn’t a perfect match for the one in the movie, but it’s close enough, and it’s always great to get that shovel again.

ELLE DRIVER

KillBill4eElle, aka California Mountain Snake, is one of the few characters to actually have a decent sized role in both films, which does make her somewhat memorable. However, most of her important scenes happen in Vol. 2, so it’s not a huge surprise that this figure is based on her look from that movie. She has four sculpted add-on pieces: hair, cuffs, and the bottom of her jacket. The hair first showed up on Marvel Minimates Series 50’s Songbird and the cuffs are from the first Marty McFly. Both are well chosen and fit the character well. The bottom of the jacket looks familiar, but I can’t for the life of me figure out who else it may have been used on. Her paint is back in line with the excellent work we saw on Beatrix and Vernita. Obviously, she’s not as colorful as the others, but the contrast of the black and white is good and all of the various detail lines are nice and clean. The face is well handled and it captures Daryl Hannah’s likeness pretty well. Elle includes the usual display stand and a Hattori Hanzo sword, which is presumably meant to be Budd’s. It might have been nice to get her little notepad of information, or maybe even an extra head missing her other eye, similar to the bleeding head included with Go-Go. As is, she seems a bit light.

THE ME HALF OF THE EQUATION

I picked this set up from my favorite Minimate retailer, Luke’s Toy Store. Beatrix gets another key look, and it’s handled with an obvious dedication to the source material, resulting in a rather fun figure, and perhaps the best version of the Bride so far; Vernita’s a solid addition; Budd is an important character in the movie, and he’s pretty decent overall, as long as you can overlook a few minor paint issues; Elle is another really pivotal character, but there’s not a whole lot of “new” to her, which does make her just a bit less exciting than the others. All-in-all, this is a great send-off to the Kill Bill Minimates line, though I certainly wouldn’t mind getting a few more figures, especially the Deadly Viper Assassination Squad in their all black numbers from the chapel scene. That’d be cool!

KillBill4h

#0714: Mega-Shiki

Posted by Ethan Wilson in Reviews and tagged with ,

MEGA-SHIKI

GUNDAM: HG BUILD FIGHTERS

Shikki4

So, hey, do you guys remember those two times way back when where I reviewed model kits? Want to read another? Well, you don’t really have much say, to be honest. This is my site; I’ll write what I darn well want to. Maybe. Sorry, I don’t do aggressive and stand-offish very well.

Anyway, I’ll be taking a look at another figure from Bandai’s extensive line of Gundam-based snap-kits, which are model kits that require no glue and result in a fully articulated action figure. Fun times. Today’s set is Mega-Shiki, which, according to the box is “Team G-Master: Shunsuke Sudou’s Mobile Suit,” whatever that means.

THE FIGURE ITSELF

Shikki2Mega-Shiki was released in December of last year, so it’s a relatively recent addition to the line. It would appear that this suit is that of a specific character, meaning it’s unique. That’s cool. This figure is part of the 1/144 scale line of model kits, which puts him at a height of a little over 5 inches tall. He’s also got 35 points of articulation, which is pretty great for a model kit. Unlike the GM Sniper and Nemo, which had a few parts shared between them, Shiki looks to be mostly new, to me at least. The sculpt is quite nicely done; there are lots of nice, clean angles, and all the line work is sharp. From what I’ve been able to find in terms of reference for the suit (on the front of the package and various shots online) it looks like it’s pretty accurate to the source material. It’s also worth noting that the kit was a pretty easy build; all the parts fit well together, and they mostly stay together pretty well, too. The only parts that gave me any real trouble were the forearm guards, which have a tendency to fall off if the hands are moved about too much. They go right back on, of course, but it can be just a bit of a pain. Like the two other kits I’ve covered, Mega-Shiki doesn’t feature any painted details. Unlike those two, he’s also pretty sparse on the use of decals; there are two on the head, and that’s it. The rest of his color work is done through properly colored plastic bits. He’s a slightly more complex build, allowing him to make more use of separately colored pieces. The colors are all good matches for the source material, and they’re just good color choices all-around. Shiki’s main accessory is the Mega Ride Launcher, which is a giant rocket pack that can also function as a giant gun. It’s got several articulated bits, allowing it to switch locations. It fits pretty well on his back, and he can hold it pretty reliably, though he does need to be posed to properly balance the weight. He also includes hands in fist, griping, and open orientations, as well as two beam swords, and a big rifle. The kit also comes with a few extra pieces, such as an alternate head, that I’m not sure are actually meant to go with this guy, or are just the result of a common parts tree with another set.

Shikki3 Shikki7

THE ME HALF OF THE EQUATION

Mega-Shiki is Tim’s fault. He wanted to check out the hobby shop where I picked up Nemo, with the expressed purpose of getting at least one of these kits for himself. I ended up spotting Shiki and thought he was pretty cool, so I got him. This is definitely a cool set. The quality of the sculpt is great, and I love the accessories, especially the Mega Ride Launcher!

Shikki1

#0713: Air Assault Spartan

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

AIR ASSAULT SPARTAN

HALO: REACH (MCFARLANE)

NobleArmor1

Hey look! More Halo! A certain writer seems to have gone on a bit of a buying spree…

So, one of the coolest things about Halo: Reach was just how much say the player had in what Noble 6 looked like. You could customize your character to have any combination of several dozen armor sets, and your character would appear that way in the main game, even during cutscenes. Because of that, 6 looked different for every player. Cool in-game, but how do you translate that to merchandising. Well, most merchandise had the basic Mark V armor in a basic dark grey (a look dubbed Blandy McBlanderpants by Tim), which isn’t the most exciting thing. McFarlane Toys decided to offer the best of both worlds, with both the basic Mark V Noble 6 in the main line (seen here), as well as a series of deluxe figures with multiple armor sets, allowing the collector to build their own Spartan, just like in the game! I’ll be looking at one of those sets today.

THE FIGURE ITSELF

NobleArmor2The Air Assault Spartan was released alongside the fourth series of McFarlane’s Halo: Reach line. It’s titled “Air Assault” due to that being the armor set it’s wearing in the package, but it also features pieces to the ODST, EVA, and CQC armors. No points for guessing which armor set I bought this for. The figure stands about 5 inches tall and has 34 points of articulation. The AA Spartan uses the same articulation scheme as Spartan Jorge. This is definitely the best set-up McFarlane’s used on the Halo figures. God only knows why they abandoned it, but the figure definitely benefits from having it. Sculpturally, the figure uses the basic Mark V Spartan body used by most of the line, which features an assortment of ports and such to allow for various armor pieces to be attached. The figure looks a little goofy without the chest piece, but it’s not meant to be viewed that way. The underlying body is pretty nicely proportioned and has a fair bit of texture and detail work, which is pulled right from the game models. The one real drawback of the sculpt is the hands; they’re just a simple grip, with no trigger finger separation or anything, which means they’re a real pain to use for holding, say, a gun. Which is a bit frustrating for a figure from a franchise where the main characters are pretty much always carrying guns. So, that’s the basic body, what about the armor? Well, the basic armor set is the Air Assault armor. This is the sleekest of the armors available here, which makes sense, given the name, and it’s probably my second favorite of those included. Next, there’s the ODST armor, which is my personal favorite. It’s modelled after the armor worn by the Orbital Drop Shock Troopers (like Mickey), but, amazingly enough, none of these parts are re-used from prior ODST figures. The helmet is more angular than past versions, especially on the visor. I do with the head was just a little bit bigger, but it’s not terrible as is. Next is the EVA armor, one of the more consistently available Halo armors. The helmet is definitely this armor’s strongest trait. The shoulders are weird, and don’t sit as well as I might like on the figure. The last full armor set is the CQC (Not to be confused with the CQB armor from the same game). I’m not much of a fan of the helmet on this one, but the torso with the pouches is definitely cool, and very well sculpted to boot. The figure also included an extra helmet, the MP helmet, which is easily my least favorite in the set. Of course, I don’t like the design in the game, so it’s at the very least accurate. The paintwork on the figure and various armor parts is top notch. The figure was available in both Blue and Steel color schemes. I went with Steel. It has a nice brushed effect to it, which makes it look nice and weathered, and all the armor sets have great work on the insignias and such. Apart from the armor sets, the figure includes no accessories, but McFarlane was kind enough to offer a weapons pack around the same time.

THE ME HALF OF THE EQUATION

So, after being sufficiently pulled into Mcfarlane’s Halo stuff, I figured I might as well have fun with it. This set had a few of the parts I used on my in-game Noble 6, so I went ahead and ordered it from Amazon. It’s certainly a fun set, and it even allowed me to salvage the “junk” Carter and 6 I got with my Jorge figure, effectively giving me three new figures in one purchase!

NobleArmor3

#0712: Scarlet Witch & Quicksilver

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SCARLET WITCH & QUICKSILVER

MARVEL MINIMATES

SW&QSMM1

Oh wow, more Minimates! What a shocker, right? So, yeah, today I’m jumping a little ways back into Marvel Minimates (which just released its 63rd Series not too long ago) and looking at two characters that are certainly a lot more prominent now than they were when this particular set was released: Scarlet Witch and Quicksilver!

THE FIGURES THEMSELVES

This pair was released in Series 16 of the Marvel Minimates line. Series 16 was an Avengers-themed series (not the first, but a close second), and was notable for being entirely made up characters that were new to the Minimate form, these two included. It was also the first comic-based series to feature new tooling, following the complete reliance on re-used parts by Series 10-13.

SCARLET WITCH

SW&QS2Wanda was arguably the second most important Avenger to debut in this series (after Thor). She’s presented here in her classic costume. She stands about 2 ½ inches tall and has the usual 14 points of articulation, though the neck movement is definitely limited by the combination of the hair and the cape. Speaking of the hair and cape, both of these were new to this figure. While they don’t have the level of detail that the more modern sculpts do, they’re both good for the time, and they fit in pretty well with other ‘mates from before this series. The details are a little softer than I’d like, but it’s mostly forgivable. The rest of the figure’s look relies on paint, which is handled decently enough, but not amazingly. Mostly it’s just basic color work, which looks fine. There’s some nicer line work on the torso, which sets her apart from some of the preceding Minimates. The weakest part is definitely the face, which just doesn’t look like Scarlet Witch. I can’t say exactly why, but it doesn’t feel like the character at all. Scarlet Witch was packed with a little spellcasting piece, which is the same as the “Chi energy” piece from Iron Fist. It’s not a lot, but it’s on par with other sets from the time.

QUICKSILVER

SW&QS3So, he’s not as important to the Avengers, but Pietro’s still a character with quite a history at Marvel, meaning his inclusion here was nice to see. Like Wanda, he was presented in his classic look, which is actually his second costume (his first was green). He too is built on the standard Minimate body, but his articulation is left totally un-hindered. Quicksilver’s lone add-on piece is his hair, which is actually a re-use from the Series 3 Ultimate Wolverine. It’s certainly not a perfect match for Pietro’s distinctive ‘do, but, like the more recent Quicksilver ‘mate, this piece works in a pinch. It would be nice for a future ‘mate to give the poor guy his own hairpiece, though. The paint work on Quicksilver is pretty decent, if a bit basic. The blue used here is just a bit too turquoise for my taste, but it’s not too far off. He’s also missing the black shorts that this costume was usually depicted with, but they weren’t always there in the comics, so I guess it’s alright. If there’s one leg up this guy has on his successor, it’s his face. It’s still not perfect (those eyes are a little big), but it looks pretty good overall. Quicksilver included no accessories.

THE ME HALF OF THE EQUATION

Series 16 holds the notoriety of being the first series of Marvel Minimates of which I was actively awaiting the arrival. I really like me some classic Avengers, and they were originally supposed to be released on my birthday of that year. Unfortunately, the series got pushed back a month, but my Dad was still nice enough to buy them for me when they were finally released. These two may not have aged the best, but they were my only versions of the characters for a while, which gives them a special place in my collection.

#0711: Lord Zedd

Posted by Ethan Wilson in Reviews and tagged with , , ,

LORD ZEDD

MIGHTY MORPHIN’ POWER RANGERS 20TH ANNIVERSARY

LordZedd1

Remember yesterday’s discussion of US-exclusive looks from the Mighty Morphin’ Power Rangers? Well, prepare to meet the king of the no-Japanese-counterpart brigade, Lord Zedd. Yes, one of Power Rangers’ coolest bad guys was not in the original source material. That seems almost criminal. Fortunately for Zedd, he hasn’t been as absent from toys as the movie-style Rangers, but it’s still kind of a big deal when he gets a figure with the same level of care devoted to him as the Rangers.

THE FIGURE ITSELF

LordZedd2Lord Zedd was part of Bandai’s Mighty Morphin’ Power Rangers 20th Anniversary line, which, like the movie line, was released exclusively at Toys R Us. Zedd was the line’s one non-Ranger. The figure is a little over 5 inches tall and has 17 points of articulation. Like yesterday’s White Ranger, his range of movement is hindered by his lack of some key joints, but this is a little less of an issue for Zedd, who did a lot of standing there looking menacing. Zedd’s sculpt was all-new to him, and it’s a decent enough sculpt. He’s a little devoid of texture, and he’s definitely got a bit of a pin-head thing going on, and his articulation is even more obtrusive than the White Ranger’s, but the overall sculpt is alright. What really ends up holding him back is the paint, which does the sculpt no favors. The lack of any sculpted texturing or fine detailing is only made more obvious by the straight, shiny colors. Rather than being a truly frightening, skinless monster, he’s just kind of this….red mess. It causes him to lose pretty much all of his menace, which really sucks, cuz that’s most of what Zedd’s got going for him. In addition, the silver paint is all over the place, with tons of bleed over, so it’s not even well applied! Zedd includes his signature Z-topped staff. It’s okay, but not great. It definitely feels too short, and it’s got this random bit in the middle where it’s just wider, for no real reason.

THE ME HALF OF THE EQUATION

I picked up Zedd at the same time as yesterday’s White Ranger. He too was purchased by my far too supportive Super Awesome Girlfriend. I’d actually looked at this Zedd figure a few times before. Since he’s not in the Super Sentai stuff, it’s highly unlikely he’ll find his way into the SH Figuarts line, meaning this is likely the best we’re going to get. All-in-all, he’s not a bad figure, just kind of a mediocre one.

LordZedd3

#0710: White Ranger

Posted by Ethan Wilson in Reviews and tagged with , ,

WHITE RANGER

MIGHTY MORPHIN’ POWER RANGERS: THE MOVIE

WhiteRanger1

In the mid-1990s, Power Rangers was pretty big, big enough to warrant getting a full-length movie, anyway. Mighty Morphin’ Power Rangers: The Movie presented a slightly different continuity from the show, and offered some slight redesigns of the Rangers costume, one assumes to make them more visually interesting on the big screen. The designs were wholly original to the American-ized version of the Rangers. There were no pre-existing toys of them in Japan, meaning that no toys of those designs were released at the time of the movie. However, with the 20th Anniversary of the Mighty Morphin’ Rangers, Bandai has decided to finally offer film-accurate versions of the characters. Today we’ll be looking at the White Ranger.

THE FIGURE ITSELF

WhiteRanger2The White Ranger was released as part of Bandai’s Mighty Morpin’ Power Rangers: The Movie line, which was released exclusively at Toys R Us, at least initially. He is, as noted, based on the design of the White Ranger from the movie, which, in contrast to the other Rangers in the movie, was actually more streamlined than the TV version. The figure stands a little over 5 inches tall (which is just a smidge shorter than the SH Figuarts Rangers) and has 19 points of articulation. While he certainly has a fair amount of articulation, the lack of lateral movement at the biceps and hips, as well as the complete lack of any sort of torso articulation does make anything much more exciting than a slightly askew “ready for action” sort of pose pretty much impossible. Power Rangers figures have typically had a tendency to be a lot more bulked up than their real life counterparts. While he’s certainly not as proportionally balanced as the Figuarts stuff, the White Ranger actually manages to have fairly modest proportions. The more armored look also helps to mask any sort of extra bulkiness, so it’s really not noticeable. The details of the sculpt are pretty decent, but some areas are a little softer than others, especially the torso. Also, most of the articulation is worked it pretty smoothly, but the hip joints stick out like sore thumbs. The paintwork on this figure is pretty decently handled; there’s not really any slop or bleed over. However, the colors are kind of flat, and he feels much too shiny overall. The White Ranger is packed with his talking sword, Saba, which can be held (loosely) in his hand or plugged into the side of his belt.

THE ME HALF OF THE EQUATION

I ended up passing on the SH Figuarts White Ranger when he was released, since I’m more of a Green Ranger fan. When I did finally look into getting one, the prices had jumped beyond what I was willing to pay. So, when I saw this guy at a local TRU while accompanying Tim on a quest for Nerf guns, I figured he was worth the investment. Unfortunately, I didn’t actually have the money on me to buy him, but Super Awesome Girlfriend was there, and, as we’ve established, she won’t let me put a figure back. He’s not a bad figure, but I will admit to being a tad disappointed by the movement once I got him out of the box. Still, you could do a lot worse.

WhiteRanger3

#0709: Starman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

STARMAN

JUSTICE LEAGUE UNLIMITED

StarmanJLU1

Growing up, I was much more a DC fan than a Marvel fan*. This was due in no small part to my primary exposure to the DC Universe being at the hands of the various animated series, courtesy of Bruce Timm and company. For many (though not necessarily for me), the high point of the DCAU was Justice League Unlimited, which offered tales staring characters from every corner of the DC Universe, barring the more mature Vertigo stuff. Tons of characters appeared on the show in its two seasons, with some taking on actual roles in the story, but most ending up as little more than scenery. Today’s focus, Starman, was part of that second group. Also, he has absolutely nothing to do with the Jeff Bridges film, just to be clear.

THE FIGURE ITSELF

StarmanJLU2Starman was actually one of the earliest figures in Mattel’s JLU line, being part of the first assortment of figures. He was available two ways: on his own with a cosmic staff accessory or packed with Superman and Amazo, in a set based around the episode “The Return.” My figure comes from the set with Amazo and Superman. Starman doesn’t figure into the plot of “The Return” in any prominent way, but he is one of the many characters who gets a brief focus during the initial fight with Amazo. There have been many versions of Starman over the years, and this one’s based on the Prince Gavin version of the character, who starred in Adventure Comics during the 70s. The figure stands roughly 4 ½ inches tall and has 5 points of articulation. Starting with the first series of JLU, Mattel implemented one of their signature buck systems, in order to make producing the multitudes of characters appearing on screen just a little bit easier. Starman is built on the medium-sized body, which was a retooled version of the Justice League line’s Green Lantern body. It’s a good translation of the body style from the show, and it’s a good fit for Starman. One small drawback of this particular body is that one of the legs is shorter than the other, meaning he stands with a slight tilt. It’s a minor issue, but it’s one that affected every figure that used this body. Starman gets his own unique head sculpt, which is probably one of my favorites from the line. It replicates his wacky hair pretty well and features a lot of really sharp line work on the facial features. It’s a great translation of the animation model for the character. The paint takes up the bulk of the work in conveying his costume, which it does pretty nicely. The colors are nice and bold, and the line work is all pretty clean. The multi-pack version of Starman didn’t have accessories, unless you want to count Superman and Amazo.

THE ME HALF OF THE EQUATION

The three-pack that contained Starman was my second item from the JLU line. The line was still pretty hard to find, so I ended up trading the Doombot from Marvel Legends of all things to get it. Perhaps not the greatest trade in the long run, but I already had a Doombot, so I didn’t mind. Starman remains one of my favorite figures from the line. I’ve always liked Gavin’s design, and it’s not like he’s got an excess of figures. This one captures the design quite nicely, which is awesome!

*Okay, that’s not entirely true. I was a pretty big Marvel fan during the back half of the 90s. It was the early 00s that turned me away from the company, before the Marvel Studios movies brought me back.

#0708: T-1000 – Police Disguise

Posted by Ethan Wilson in Reviews and tagged with , , ,

T-1000 – POLICE DISGUISE

TERMINATOR GENISYS (NECA)

T1000Genisys1

One of the most distinctive parts of Terminator 2 is its main antagonist, the T-1000, played oh so menacingly by actor Robert Patrick (and some CGI). The T-1000 upped the threat presented by the original T-800 in spades. After T2, the movies really struggled to up the ante again, which was disappointing. Genisys not only successfully brought up the threat, but they also brought back the T-1000 for a second round. The new T-1000 was chosen as one of the characters to be represented in NECA’s line of figures based on the movie. I’ll be looking at that figure today.

THE FIGURE ITSELF

T1000Genisys2The T-1000 is the second figure in the first assortment of NECA’s Terminator Genisys figures. He’s based on Byung-hun Lee’s performance as the T-1000 in the movie. The figure is 7 inches in height and he has 22 points of articulation. As far as sculpt goes, he’s got more than a few parts in common with NECA’s previous Robert Patrick T-1000. Seeing as they wear more or less the same uniform and Lee’s build isn’t that different from Patrick’s, this is a pretty reasonable re-use. The re-used parts are generally pretty good, but they are just a tiny bit more stylized than NECA’s more recent stuff. It’s not horribly noticeable, but the arms are definitely longer than they would be realistically. Still, the line work is nice and sharp, and the overall look of the character is captured very nicely. The figure obviously gets a new head sculpt (well, technically two), but he also gets a new lower half, which has been updated to give him proper leg articulation. That’s much appreciated. The figure has two different heads and two T1000Genisys3fronts for his torso, with and without bullet wounds. I prefer the damaged pieces, as they quite succinctly illustrate the T-1000’s abilities, but both sets of parts are nicely handled. The head sculpts both do a decent job of capturing Byung-hun Lee’s likeness, though I think the one with the bullet hole looks a little more like him. The paint on the T-1000 is pretty solid work. Nothing extraordinary, but nothing particularly bad either. Hopefully, the color of the uniform on this one will match up with the upcoming Ultimate T-1000 figure, but only time will tell. In addition to the extra head and torso pieces, the T-1000 is packed with his standard issue sidearm, two alternate right hands (trigger finger and basic grip), an alternate nub piece for his left arm, and liquid metal javelin. Hook arms would have been nice, but I guess they had to draw the line somewhere.

THE ME HALF OF THE EQUATION

I ordered the T-1000, alongside the Guardian T-800, from NECA’s eBay store. The character’s relatively minor in the film, but I never got any of NECA’s previous T-1000s, so this one’s a good stand in, at least until the Ultimate version is released. But, you really can’t have too many T-1000s, can you? Plus, this guy makes for a pretty awesome pairing with the 1984 Guardian. He’s got a fair bit going for him!

T1000Genisys4

#0707: Guardian T-800

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GUARDIAN T-800

TERMINATOR GENISYS

GuardianT800c

Frequent readers of the site will recall that I was quite complimentary of Terminator Genisys. Ever since the movie’s release, I’ve been eagerly awaiting its tie-in toyline. The line is produced by NECA, who are one of my favorite toy companies of late. They’re starting off with a small assortment of three figures. Two of them are available, and the third will be out some time later this year. Today, I’ll be taking a look at the first version of Arnold Schwarzenegger’s Guardian T-800.

THE FIGURE ITSELF

GuardianT800bThe Guardian T-800, referred to in the film as “Pops,” was released in the first assortment of Terminator Genisys figures. He’s based on his appearance from the 1984 portion of the film. It’s ultimately not quite as important as the 2017 look (which will be the third figure in the line), but it is how we first see him, which is a defining moment, to be sure. Plus, it’s a pretty good move on NECA’s part to release this version first, as many people who might pass on this version were both available will be inclined to get this guy as a place holder. The figure stands a little over 7 inches tall and has 24 points of articulation. Pops gets an all-new sculpt, some of which will probably see re-use on the 2017 version. Overall, I really love the sculpt. The proportions are great, the articulation’s been worked in really well, and he has some superb detail work. His leather jacket is creased and worn, just like the real thing, and the rest of the clothing has great texturing and depth. If there’s one drawback to the sculpt, it’s the likeness on the head. It’s not terrible, or anything, just not as good as what we’ve seen from NECA’s previous Schwarzenegger sculpts. I think a lot of it’s the hair, which just seems a little too bulbous around the sides. The actual face seems more on point, though it’s better from some angles than it is from others. From one angle, it’s Arnold, from another, he looks not unlike John Larroquette. The paint is pretty decent, but there are a few minor issues here and there. Most of the issues are on the head; the hairline in particular is a little sloppy. It’s not noticeable from a normal viewing distance, but it’s there when he’s up close. Pops is packed with a shotgun, which is what he’s seen wielding during his introductory scene. It’s nicely sculpted and it fits well in his hand.

THE ME HALF OF THE EQUATION

As I mentioned above, I was anxiously awaiting these figures. When NECA tweeted that the first two figures were in stock in their eBay store, I ordered them as quickly as I could. The 2017 version is still the one I’m waiting for, but this guy is pretty awesome. He’s got a few minor issues here and there, but the overall figure is cool enough that it doesn’t really bug me. This guy’s definitely a solid figure, and I’m very happy to have him!

#0706: Unmasked Black Costume Spider-Man & Gwen Stacy

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

UNMASKED BLACK COSTUME SPIDER-MAN & GWEN STACY

MARVEL MINIMATES

Spidey&Gwen1

Hey, you guys like Minimates, right? Well, if you’re still following this site at this point, you kind of have to, don’t you? Though Marvel Minimates based on the latest Marvel movie are more or less a certainty these days (unless you’re Fant4stic…), they weren’t always such. X-Men, Spider-Man, Daredevil, Hulk, and Fantastic Four all had to make due with loose, comic-based tie-ins. It wasn’t until Series 14’s X-Men 3 Minimates that we would see any direct representation, though that series sure did open the floodgates. It was followed shortly thereafter by a whole two series based on Spider-Man3, which included the pair I’ll be focusing on today, Unmasked Black Costume Spider-Man and Gwen Stacy.

THE FIGURES THEMSELVES

These two were released as a two-pack in Series 18 of Marvel Minimates. Gwen was the regular release figure, who was swapped out for Mary Jane in the variant set. But, I don’t have Mary Jane, so…

UNMASKED BLACK COSTUME SPIDER-MAN

Spidey&Gwen2Wow, that’s a long name isn’t it? Need a few more adjectives there Pete? Trying to compensate for something? Every single pack in these two series featured a Spider-Man variant and he’s the one for this set. Yay. The figure is about 2 ½ inches tall and has the standard 14 points of articulation. He is, of course, based on the symbiote version of the Spider-Man costume, as seen in the third movie. He’s got a specially sculpted mask piece, with his mask part of the way rolled up. I’m not a fan of this piece; it’s awkwardly shaped, and, for some reason, the bottom, unmasked portion of his face is a part of the piece, making his head look really bloated. Also, given that this figure is packed with Gwen, one would presume the rolled up mask is meant to replicate their kissing scene from the movie. Except for one thing: Peter’s still wearing his normal costume at that point in the movie. So, I’m not really sure what this is meant to be. Overlooking the whole bit with the wrong costume, the paint on this figure’s not bad. The weblines are nice and clean, and the texturing on the unlined portions looks great. Under the mask is a Peter Parker face, with more or less the same expression as what’s on the bottom of the mask piece. It doesn’t really look much like Tobey Maguire, but it’s a decent enough Peter. The expression’s totally wrong for this costume, but oh well. The figure included a spare hairpiece, allowing him to actually live up to his name.

GWEN STACY

Spidey&Gwen3This was actually only the second time Gwen made into the Minimates line. This one’s based on her movie appearance, of course. Her inclusion as the heavier packed figure between her and Mary Jane was somewhat odd, seeing as she has a rather minor role in the film. That said, she was played up pretty heavily before the film’s release, so that probably influenced DST’s decision. She was based on her appearance from the previously mentioned “kissing scene” (which only further emphasizes Spidey being in the wrong costume). She’s built on the standard Minimate body, with add-ons for her hair, jacket, and skirt. All of these were new to this figure; they’re well sculpted, and they capture her look from the movie very nicely. The skirt would go on to become a standard piece, which is still in fairly current use, but the other parts remained unique to Gwen. The level of detailing on her hair and jacket is actually very nice, and marked the some of the Marvel Minimates line’s earliest transitioning into the more modern style of Minimates. Gwen’s paint work is fairly basic, but it does a pretty good job of translating her look from the movie into the ‘mate style. Her jacket could probably stand to be a few more shades removed from the flesh-toned plastic, but that’s a minor issue. The face has a rather good likeness of actress Bryce Dallas-Howard, which is good. Gwen included no accessories.

THE ME HALF OF THE EQUATION

I got this pair, as well as all of the other regular release Spider-Man 3 Minimates, as a Chritmas gift from my parents, the year they were released. Purely looking at the quality of the ‘mates, they’re pretty well done. The mask on Spider-Man is weird, but it’s easily swapped out for the much better looking hair piece that was included. Gwen is actually a pretty top-notch ‘mate, with some fantastic sculpted pieces, a good likeness, and pretty decent paint work. As a whole, though, neither of these two is particularly exciting. Maybe they would have fared better if they’d been packed with other figures.