#0308: Star-Lord & Ronan

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

STAR-LORD & RONAN

GUARDIANS OF THE GALAXY

StarLord&Ronan

Okay, just one more Guardians of the Galaxy review you guys. Well, until the Minimates are released. And there’s rumors of a second series of the two lines Hasbro’s got. Okay, so one more for the time being. Anyway, the 2 ½ inch line from Hasbro has been an unexpected treat, I must say. I didn’t have super high expectations, but I was drawn in by the broader character selection. While the main Guardians may not be the most exciting figures, the line is really investing in those side characters! Today, I’ll be looking at Star-Lord and Ronan, the movie’s main hero and main antagonist, respectively.

THE FIGURES THEMSELVES

This duo was part of the first, and currently the only, series of the 2 ½ inch Guardians of the Galaxy line. It’s currently the only way to get Ronan in non-Minimate form.

STAR-LORD

StarLord&RonanWilson1Wait a second, didn’t I just review this guy yesterday? Oh, a different version, you say? Yep, this is the long coated version of Star-Lord, which is the version that’s been seeing all the marketing. Surprisingly, it’s only in the first few minutes of the movie, which means it doesn’t actually fit with the rest of the characters (except for Korath). Still, it’s the look everyone’s associating with the character. The figure stands right at 2 ½ inches tall and features 5 points of articulation. The figure shares his arms and legs with the previous version of Star-Lord, which isn’t really that surprising. He gets a new torso, with his backpack sculpted on, plus a helmeted head, and an add-on piece to represent the bottom of his coat. These pieces all look pretty great, and seem accurate to the movie design. The helmeted head is definitely a step up from the unmasked one of the previous Star-Lord. Fortunately, the figures pop apart at each joint, so swapping the heads is no issue, should you so desire. The paint work on Star-Lord is a real improvement too. He’s got a fair number of details, and I’d say the paint on this mask is cleaner than the 6-inch version.

StarLord&Ronan3

RONAN

StarLord&RonanWilson2Ronan seemed like a pretty big omission from the 6-inch line, but he did find his way into this line. He’s right at the 2 ½ inch mark and he has, wait for it, 5 points of articulation. How about that? Ronan only had the one look (other than at the beginning when he was naked, but I don’t see that going onto a Target shelf…), so that’s the look they went with. He’s got an all new sculpt, and it’s a pretty good one. He has some nice heft to him, which fits the character, and his armor is all nice and detailed. The head is pretty good. It doesn’t scream Lee Pace, but it’s not bad given the scale. He’s got a few add-on pieces for his skirt-piece and his “cape”, both of which do their job nicely. The paint work on Ronan is actually quite detailed and it’s mostly free of any instance of bleed over or slop. He’s even got the properly painted hands that Gamora was so sadly lacking!

Like every other set in the line, this set comes packed with an accessory tree, and a missile launcher. The launcher is shaped like the big gun used by Star-Lord and Drax, so that’s cool. On the tree, is a hammer for Ronan, and some sort of blade for Star-Lord, as well as a missile, and something I can’t quite identify.

StarLord&Ronan2

THE ME HALF OF THE EQUATION

This was the third of the three sets of Guardians figures that were bought for me by Super Awesome Girlfriend. This is definitely the best of the three sets, though I don’t know if it quite tops Groot, Rocket & the Nova guy as my favorite set. This is definitely one of the most essential sets in the line, so I wouldn’t recommend passing it up. All in all, this line is pretty darn great. I don’t have all the figures yet (still need that Sakaar Trooper) but I love the set I have. I really hope Hasbro makes a few more of these, as I’d love to get Yondu, Nebula, and the Collector to round them out!

StarLord&Ronan4

#0307: Star-Lord & Gamora

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

STAR-LORD & GAMORA

GUARDIANS OF THE GALAXY

Gamora&StarLord1

You know what was awesome? Guardians of the Galaxy. You know what’s even better? There are tons of toys based on the movie. I am in toy bliss, I kid you not. I was a pretty big fan of the 6-inch figures and I’m liking what I’ve seen so far of the Minimates. What caught me off guard was how much I’m enjoying Hasbro’s 2 ½ inch line. I’ll be looking at another of those sets today, with Star-Lord and Gamora. This set is the first set not to offer someone unavailable in the 6-inch line, although this is the only way to get this particular version of Star-Lord.

THE FIGURES THEMSELVES

Star-Lord and Gamora are part of the first, and so far only, series of 2 ½ inch Guardians of the Galaxy figures from Hasbro. As the two most prominent characters in the movie, they share a fair bit of screen time, so I suppose this makes sense. Still, I feel like it might have been better served to spilt the two to allow for less popular characters to be paired with them, but what do I know?

STAR-LORD

Gamora&StarLordWilson2Star-Lord clocks in right at 2 ½ inches tall and features 5 points of articulation. The figure is based on Quill’s look from the majority of the film: short coat and no mask. He features a mostly unique sculpt. A few pieces are shared between this figure and the other version of the character in the line, but I’m looking at this one first, so he gets the credit of using them first! The sculpt is pretty decent. Not quite as detailed as some of the sculpts we’ve seen in the line, but I’d say it’s better than Drax. The resemblance to Chris Pratt is passing at best, but it’s no worse than the 6-inch version.  The body is better than the head. It’s got a nice assortment of details, and everything looks pretty spot on to his movie appearance. Star-Lord is molded in three separate colors: dark gray for his lower half, a maroon for his upper half, and flesh-tone for his head and neck. He’s got paint for his hands, shirt, and the details on his head. It’s okay, though not spectacular. The paint for his hair doesn’t quite cover all of the sculpted hair, so he’s got a bit of a receding hairline going on. Everything else is pretty straight forward.

GAMORA

Gamora&StarLordWilsonGamora is a little on the smaller side, coming in a little under 2 ½ inches. She features the standard 5 points of articulation for the line. The figure takes it’s look from Gamora’s design from the first half or so of the movie. It’s the design that all of the merchandise has, so it’s not a surprise to see it here. She gets an all new sculpt. It’s pretty good. I’d say she has one of the better likenesses in the line. The proportions aren’t too bad, aside from those giant man-hands, which is pretty decent at this scale. Unfortunately, the figure is virtually impossible to stand. This is the second figure of this character which features this as a defining trait. Is Hasbro trying to send us a message about Gamora? The paint on Gamora is okay, but nothing outstanding. She’s mostly molded in a dark blue plastic. They’ve applied paint for her skin, hair and boots. The skin is a bit thick and gloppy, and has a few areas of bleed over. Also, they’ve missed painting her fingers, which leaves her hands fully gloved. Also, most of her uniform has been left the blue color of the plastic. Not only is this wrong for the design, it’s also rather boring. On the plus side, they’ve actually done a pretty great job translating her multicolored hair, so it’s not all bad.

Just like the last two sets from this line, these two are packed with a selection of accessories on a “tree.” They’re a bit more descript this time, at least. Star-Lord gets one of his Element Blasters and Gamora gets her sword. In addition there’s a larger gun, a jet-pack looking thing, and a spring-loaded missile launcher for the two to share.

Gamora&StarLord2

THE ME HALF OF THE EQUATION

This set was another set purchased for me by Super Awesome Girlfriend. I think I like this set more in theory than in actuality. I’m glad to have Gamora, as she’s an essential part of the team, and it’s cool that somebody gave us Quill in the shorter coat that he spends the majority of the movie wearing. That being said, this two pack is probably the weakest set in the first series line-up. Still, it’s a pretty essential set, and the figures aren’t bad. If you want the rest of the figures, there’s no reason to skip this one.

Gamora&StarLord3

#0306: Drax & Korath

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DRAX & KORATH

GUARDIANS OF THE GALAXY

Drax&Korath1

I sure hope you guys liked Guardians of the Galaxy, because the GOTG reviews are just beginning! The cool thing about the merchandise for the movie is that there’s several different options scale and style-wise. Hasbro has two main scales: 6 inch and 2 ½ inch. I’ve already taken a look at all the figures in the 6 inch line, so I’ve moved on to the 2 ½ inch. I already looked at Groot, Rocket, and a Nova Corps Officer, all of which I quite enjoyed. Now I’ll be looking at Drax and Korath. Let’s see if they live up to the first set.

THE FIGURES THEMSELVES
These two were part of the first, and right now only, series of Hasbro’s 2 ½ inch Guardians of the Galaxy line. The two don’t have a whole lot of interaction in the movie, but they had that one fight scene, so it’s not a bad pairing.

DRAX

Drax&KorathWilson1This marks the fourth time I’ve reviewed a Drax figure on this site. I don’t think I saw that coming. Drax clocks in at just over 2 ½ inches in height and features 5 points of articulation. Drax’s sculpt isn’t bad, though it’s not quite as good as Groot or the Nova Officer. The details are a lot simpler. For instance, the tattoos are completely painted on this figure. It’s understandable at this scale, but it does make him a bit more generic looking. The legs provide a bit more detailing, which is nice. Curiously, he has a knife sheath on his right leg, but not his left. He has a sheath on both legs in the movie, so it’s odd to see only one present. Drax’s top half is molded in a pale green, and his bottom half is molded in a maroon, with a few paint apps to fill in the missing colors. There seems to be an inconsistency with the shade of Drax’s skin. On the Minimate it seemed to dark, and here it seems too gray. The painted details all seem pretty good. The tattoos are nice and clean, and there doesn’t seem to be any slop or bleed over.

KORATH

Drax&KorathWilson2Poor Korath. He’s a fairly important character, and this is his only action figure throughout all of the Guardians lines. I suppose that’s bound to happen with a cast as large as GOTG’s. He made out better than the Collector or any of the named Nova’s, so he’s got that going for him. Korath is almost 2 ½ inches exact in height, and he features the standard 5 points of articulation. Where Drax has a simple sculpt, Korath’s is a great deal more detailed. All of his armor is properly decorated, and the rest of his uniform has some pretty great texturing too. Korath is molded in three differently colored plastics: flesh tone for his head, silver for the torso and arms, and a dark gray for the legs. The rest of the coloring is painted, and the paint apps seem to be pretty decent. He’s got no real slop or bleed over, nor obviously missing details like the Nova Corps Officer.

Like the previous set, these two included a selection of random accessories. There looks to be a blade, an axe, and the obligatory missile launcher. I think the blade goes with Drax, but other than that I don’t have a clue. At least I could make out what most of them were this time!

Drax&Korath2

THE ME HALF OF THE EQUATION

After getting Groot, Rocket & the Nova guy, I was definitely interested in getting more of this line. While walking through Target with Super Awesome Girlfriend, I came across most of the remaining sets from the line. However, we walked down the next aisle, and I discovered the Star Wars: The Black Series Speeder Bike (Check out the review here). I only had money for one or the other, so I went to put the Guardians figures back. Living up to her name, yet again, Super Awesome Girlfriend informed me that I wouldn’t be putting them back, because she would buy them for me. Yay!

Drax is kinda meh, but I actually really like how Korath turned out. Like the Nova Corps Officer, he’s surprisingly detailed, and makes up for the lack of the character in the 6-inch line. Hasbro really pulled in their A-game on the secondary characters, and it’s what makes this smaller line really work!

Drax&Korath3

#0305: Yondu & Sakaar Trooper

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

YONDU & SAKAAR TROOPER

MARVEL MINIMATES

Sakaaran&Yondu1

Guardians of the Galaxy was an awesome movie. Minimates are one of the greatest toylines of all time. These are indisputable facts. Sorry if you disagree, but that’s just how it is. So, the combination of these two things can be nothing if not amazing!

The Guardians of the Galaxy Minimates are a subset of Diamond Select Toys’ flagship Marvel Minimates line. Their just starting to hit stores, starting with the Toys R Us assortment. Today, I’ll be looking at Yondu and the Sakaar Trooper.

THE FIGURES THEMSELVES

Yondu and the Sakaar Trooper are the exclusive set from the TRU assortment of Guardians of the Galaxy Minimates. The Sakaar Trooper will also be packed with Nebula in Marvel Minimates Series 57, making Yondu the only true TRU exclusive.

YONDU

Sakaaran&YonduWilson2Yondu holds the honor of being the only of the original Guardians of the Galaxy to appear in the film. He also ended up being the character that had perhaps the most changes made to him. I guess the world just wasn’t ready for a blue-skined 30th century archer who sports a 2 foot red mohawk and spandex. And that’s a shame. The Minimate is of course based on the film version of the character. The figure is about 2 ½ inches tall and features 14 points of articulation. He uses the standard Minimate body, with all new pieces for Yondu’s “mohawk” and scavenger jacket. Both pieces are well sculpted and look accurate to the source material. Perhaps the details on the jacket could be a bit sharper, but that feels a bit nit-picky. The painted details on Yondu are top-notch. Even with blue skin and red eyes, that’s definitely Michael Rooker’s face. Yondu’s uniform is also quite impressive. There’s tons of folds, straps, pouches and zippers present, which really helps the figure convey the “scavenger” look. The Mohawk piece is red, which isn’t quite right to the movie, where it was a silver piece that glowed red, but I actually prefer the red. Yondu’s only accessory is a clear display stand. It’s a little disappointing that he didn’t get any of his little console doodads, or at the very least his golden arrow, but I suppose the line has to be drawn somewhere.

SAKAAR TROOPER

Sakaaran&YonduWilson1The Sakaar are yet another alien race elevated to movie-dom thanks to Marvel Studios not having the rights to all the top-notch aliens.  They and the Chitari must just laugh it up every time the Skrulls and the Baddoon stop by! The Sakaar Trooper stands 2 ½ inches tall and features 14 points of articulation. The Sakaar Trooper is built on the base Minimate body, with the addition of a newly sculpted helmet. The helmet is a decent piece. It has the look of a rough sculpt, but that’s pretty accurate to the look of the Sakaar from the movie. The rest of the figure’s details are handled via painted details. They’ve done a pretty great job of boiling down the rather complex Sakaar design into a basic set of painted details. Like Groot, the Sakaar Trooper features some rather extensive texture detailing that wraps around many of the surfaces. The Sakaar Trooper includes a blaster and a clear display stand.

THE ME HALF OF THE EQUATION

I purchased this set at the same time as yesterday’s Drax, Groot & Rocket. This being the exclusive set, it was the one I was actually looking for at TRU. Yondu’s a pretty cool ‘mate of a pretty cool character, so I’m glad to have gotten a hold of him. The Sakaar Trooper isn’t the most exciting Minimate, but he could be worse. Maybe he’ll be cooler when I have two of him…

#0304: Drax, Groot & Rocket Raccoon

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DRAX, GROOT & ROCKET RACOON

MARVEL MINIMATES

GrootRocketDrax1

Hey, you know how Guardians of the Galaxy was an awesome movie? Were you aware that, being a Marvel movie, it’s guaranteed to get its own assortment of Minimates? Did you know I love Minimates?

Yes, I love Minimates, and I also loved Guardians of the Galaxy. Put those together, and you’ve got a product I just can’t resist. The Minimates for the movie are just starting to hit, and I’ve already begun to pick them up. Today, we’ll be starting off with Drax, Groot & Rocket Raccoon. Wait a second… three minimates? Not two or four? How is this possible? Read and find out…

THE FIGURES THEMSELVES

Drax, Groot & Rocket are one of the overlap sets from Daimond’s two assortments of Guardians of the Galaxy Minimates. They’re included in both the Toys R Us assortment and Marvel Minimates Series 57, which ships to comicbook stores and specialty shops. My set comes from TRU, as the specialty sets haven’t been released just yet.

DRAX

GrootRocketDrax2Amazingly, this isn’t the first Drax Minimate I’ve reviewed here. Way back in review #0162, I took a look at the classic comic version of the character released in the Infinity Gauntlet set. It’s safe to say that was a fairly different take on the character. This version of Drax is based on the movie version, which is in turn based on the character’s more recent design. Drax is more specifically meant to represent Drax from the middle point of the film, after they escape from the Kyln, but before they get matching uniforms. Drax stands about 2 ½ inches tall and features 14 points of articulation. He’s built on the standard Minimate body, and features 4 sculpted add-ons: a bulked up torso, a waist cover, and a pair of big stompy boots. The torso has previously been used on figures such as the Best-Of version of Venom and the waist piece has been used on more figures than I can count. The waist piece works, as Drax is definitely meant to be a thick guy, but I’m not sure about the chest piece. On its own, it’s alright, but coupled with the really skinny arms, it looks very out of place. As far as I can tell, the big stompy boots are new. They’re well sculpted, so that’s good. Drax’s paint work is good from a technical stand point. Everything is clean and there’s no real slop or bleed over. I do wish that his skin were a brighter green and the tattoos were a bit bolder, just so he wasn’t quite so muddled, but it doesn’t look bad, per say, just a bit drab. I guess he’s a Drab Drax… heh heh. Drax comes armed with twin knives and a clear display stand.

GROOT & ROCKET RACCOON

GrootRocketDrax3If there’s one thing everyone can agree on about Guardians of the Galaxy, it’s that these two stole the whole movie. I think Groot in particular surprised a lot of audiences. So, you’re probably thinking “Why are you reviewing both Groot and Rocket at the same time?” Quite simply, it’s because only one of them’s a Minimate. I’ll start with Groot, because he’s actually the figure here. Groot is a little over 2 ½ inches tall and has 14 pointes of articulation. Like Drax, he uses the basic Minimate body, with unique pieces for his head, hands, and feet, as well as a torso extender add-on that’s seen use a few times. The new pieces are all pretty great. My only complaint is that the head has two tabs on the back to allow for Rocket to be propped on Groot’s shoulder. It’s an okay idea in theory, but it’s difficult to get Rocket to stay in place, and it leaves Groot with two rather noticeable tabs sticking out of his head. The paintwork on Groot is really great, and superbly detailed. His bark detailing even continues around the sides of his torso, which is certainly impressive. Groot comes with a clear display stand and Rocket. Rocket is about 1 ½ inches tall and is unarticulated. He has been sculpted to appear as though he has the same 14 points as the typical Minimate. He is sculpted holding a gun in one hand, with his arm outstretched. He’s well sculpted, and his paint isn’t too sloppy. It’d be nice if he could move, but I guess it’s good to have him at least.

THE ME HALF OF THE EQUATION

These three were purchased at a TRU not too far from the hotel I was staying at for a local convention. They capped off a pretty awesome night hanging with a few of my friends and Super Awesome Girlfriend. On our drive to dinner, my buddy Tim and I saw the TRU and insisted on going in. I found this set, as well as the exclusive Yondu & Sakaar Trooper and Star Lord & Ronan. I left Star Lord & Ronan there, as it’s a shared set, but I gave in to my impatience on these three. I just had to have Rocket and Groot! All three figures in this set are pretty impressive, even if there are a few small issues. I can’t wait to see how the rest of the main Guardians turn out!

#0303: Scunner

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SCUNNER

PACIFIC RIM

Scunner4

There’s been plenty of movies that have come out since Pacific Rim that have delivered on the awesome quotient, but it’s a movie that had its own definitive style, and it left a very lasting impression on me. That impression was mostly: Holy crap those robots fighting those giant monsters were SO AWESOME!

NECA picked up the license to do figures for the movie. The first two series of figures weren’t bad, but they weren’t quite as awesome as the movie. Most notably, the monsters, or Kaiju, were lacking in detail, articulation, and especially size. Beginning with Series Three, NECA set out to fix this, going so far as to split the Kaiju off into their own sub-line so that they could truly be the gargantuan creatures they deserved to be. Today, I’ll be looking at one of the Kaiju from the film’s climactic underwater battle, Scunner!

THE FIGURE ITSELF

ScunnerWilsonScunner was actually not part of a series-proper. He ended up being a single release in NECA’s Pacific Rim Kaiju sub-line, hitting just a few months after Series One. The figure is about 8 inches standing tall, and it features 29 points of articulation, plus a bendy tail! That’s certainly an improvement over the original Knifehead’s less than 7 inch height and 15 points of articulation. Scunner makes use of the new and improved Knifehead body from the first series of Kaiju. It’s a sensible re-use, as the creature designs used many of the same elements, and it’s also a key plot-point that the creatures are all manufactured by mixing and matching parts. If you’re going to get extra mileage out of a sculpt, this is definitely a good one to do so with. The sculpt is well-detailed, well-proportioned, and well-articulated to boot. In addition to the Knifehead parts, Scunner gets a brand new head sculpt and a torso overlay to reflect his slightly tweaked design. The pieces match the quality of the body pieces very nicely, and accurately reflect the design of the creature in the movie. Scunner has been molded in a dark gray/brown plastic, with paint to add texturing as well as Scunner’s bioluminescent features. The paintwork is mostly good, and is definitely a step up from previous Kaiju offerings, but there are still a few areas of slop, most noticeably around the edges of the bioluminescent green. Fortunately they aren’t too distracting, but it would be nice if it were a bit cleaner. Scunner includes no accessories, but given the lack of any real accessories to include coupled with the sheer size and mass of the figure, this is forgiveable.

Scunner5Scunner7

THE ME HALF OF THE EQUATION

Scunner was picked up from a small toy store called All Time Toys, located near where I live. While Super Awesome Girlfriend was visiting, she and I went out and about to explore the area. We stopped by the store, and I was definitely intrigued by their impressive Pacific Rim display. I resisted the urge to buy anything, and we continued exploring. However, we had to pass the store on our way back to the car, and Super Awesome Girlfriend, living up to her name, encouraged me to go back in for one of the Kaiju. I decided on Scunner, as I felt he offered the most unique look of the possible options. He’s really a fun figure, and it’s nice to finally have a Kaiju that matches the quality of the very impressive Cherno Alpha from the most recent series of Jaegers.

Scunner6

#0302: Ant-Man

Posted by Ethan Wilson in Reviews and tagged with , , ,

ANT-MAN

AVENGERS INFINITE

AntMan1

Avengers Infinite, which serves as Hasbro’s replacement for Marvel Universe, certainly has an interesting character selection. When it was first announced by Hasbro that MU was going to be rebranded with the Avengers name to make it more marketable, a lot of fans were worried that this would mean other areas of the Marvel universe would be left out. Given that, of the figures I’ve reviewed recently, there’s been one actual Avengers member (and a more recent one at that) and two characters not really related to the Avengers at all (not to mention the assortment also including Cyclops, who at this point is like the only X-Man NOT to be a member of the Avengers), I think it’s safe to say the “Avengers” section of the title is mostly a formality. Still, Hasbro is doing their best to keep the Avengers mainstays coming, as evidenced by today’s figure of founding Avenger Ant-Man.

THE FIGURE ITSELF

AntManWilsonAnt-Man is part of the third series of Avengers Infinite, which is just now starting to hit stores. Ant-Man was long rumored to be part of a two-pack in Marvel Universe before the line’s cancellation, but he never saw release. You guys sensing a common theme with this series of AI, because I sure am. According to the back of the box, he’s the Hank Pym version of the character, but it could just as easily be Scott Lang if you so desire. It’s mostly based on the character’s original design, although the helmet seems to be a bit more Ultimates inspired. The figure stands about 4 inches tall and sports 24 points of articulation. He’s built on the Black Spider-Man body, specifically the incarnation of it from the end of the MU line when they added the thigh cuts. The body is one of the older bodies from the MU line, and while it doesn’t such, it’s not the greatest. In a perfect world, Hasbro would come up with another “skinny” buck, but this one works okay in a pinch. Ant-Man’s only new piece is his head. I’m not a fan of The Ultimates, so I’d prefer a more classically inspired helmet, but this one’s not terrible. It’s well sculpted, and there are a lot of nice details, so that’s cool. There are holes where it looks like they meant to place antennae, but there’s nothing there. I guess they couldn’t get them to work feasibly. For the most part, Ant-Man is molded in red plastic, except for his head, which is skin tone. Everything else is handled via paint. The paint aps are overall pretty clean, though the red to blue transitions are a bit rough. They’ve chosen to give his straight gloves and boots instead of his usual jagged ones. It’s unfortunate, as it robs the figure of a unique design element. Ant-Man includes one accessory: a mini Ant-Man, similar to the mini Wasp included with her figure.

AntMan2 AntMan4

THE ME HALF OF THE EQUATION

Ant-Man is the fourth, and final, of the Avengers Infinite figures I picked up from my local comicbook store, Cosmic Comix. I’ve always been a pretty big Ant-Man fan, so I’ve been waiting for this figure since he was supposed to be in a two-pack way back in the MU line. I’m glad to finally have the figure, but he’s at best middle of the road. I’m more of a Scott Lang Ant-Man fan, and while this one works perfectly fine as Scott, I would mind seeing him get a figure based on either of his more recent designs.

AntMan3

#0301: Marvel’s Death’s Head

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MARVEL’S DEATH’S HEAD

AVENGERS INFINITE

DeathsHead1

Would you believe me if I told you that I had definitive proof that Transformers and Doctor Who share the same universe with just about every Marvel Comics super hero? Because they do, thanks to a set of appearances by one character: Death’s Head. As you clearly see in the title, he’s Marvel’s Death’s Head (which has two possessives. If I want to talk about the clasp on his cape, I’m talking about Marvel’s Death’s Head’s cape’s clasp. Think about that for a while…). Death’s Head was created for a Transformers comic while Marvel held the license. Not wanting to potentially lose a unique character to Hasbro, they quickly created a short strip featuring the character that was published in several of the comics in their UK line. Marvel also happened to be publishing a Doctor Who comic at the time, which also saw an appearance from Death’s Head before he finally made his way to the main Marvel universe. Now, 27 years after his original appearance, he’s finally gotten his very own action figure made by…. Hasbro. How about that?

THE FIGURE ITSELF

DeathsHeadWilsonDeath’s Head was part of the second series of Hasbro’s Avengers Infinite, the line which serves as a replacement for Marvel Universe. He was long rumored to be an upcoming figure in the MU line, so following that line’s cancellation, the figure’s fate was uncertain. Fortunately, he found a home in AI, so everybody still has a chance to have a toy of their favorite tri-dimensional bounty hunter. He stands just over 4 inches in height and features 27 points of articulation. Death’s Head makes use of the MU Colossus body as a starting point, reusing the arms, upper and lower torso, and legs from the boot up. Given that both characters are larger in stature and both feature a similar banded metal patter, the choice of re-use is inspired. In addition to these pieces, the figure also has brand new pieces for his head, hands, shins, and feet, as well as add-ons for the cape/shoulder-pads and the belt/loincloth/waist armor. The new pieces are really great sculpts. The head sculpt looks to have been lifted directly from the character’s comic appearances, and the armor pieces have some really wonderful denting and weathering. My only complaint is how loose the cape add-on is, as it causes it to sit incorrectly if you aren’t careful. The paintwork on Death’s Head is nice and clean for the most part. There’s a bit of bleed over here and there, but nothing too distracting. The metallic blues in particular make the figure really pop. Death’s Head is armed with an axe, a mace, and a shield, all of which are new pieces that look pretty great and fit the figure’s hands well.

THE ME HALF OF THE EQUATION

Like Deathlok and Valkyrie, Death’s Head was picked up from my local comicbook store, Cosmic Comix. Like Valkyrie, Death’s Head is a figure that I’ve wanted since the initial rumors of his release started cropping up. I’m not entirely sure why I’m so interested in the figure. I’ve read maybe two or three of Death’s Head’s comic appearances. I guess something about the character’s design just resonates with me. Unsurprisingly for a character designed for a toyline-tie-in, Death’s Head translates really well to the action figure format and makes for a pretty neat toy.

DeathsHead2

#0300: The Hulk

Posted by Ethan Wilson in Reviews and tagged with , , ,

HULK

AVENGERS (HOT TOYS)

hulkb

I still have two more Avengers Infinite reviews to do, but I’ll be taking a break from them today. Why, you ask? Because, surprisingly enough, I’ve made it through 300 of these reviews.  I can honestly say I haven’t stuck with any of my projects for this long. I think the most surprising thing here is that you guys are still reading my reviews. Maybe I don’t suck after all! In honor of another milestone review, I’ll be doing another “Deluxe Review.”

This is another figure from Hot Toys, a company renowned for their high-end action figures. Their bread and butter in recent years has been super hero movies, and one of their most successful licenses was 2012’s The Avengers. I’ll be looking at the biggest (in more way than one) release of the line, the Incredible Hulk!

THE FIGURE ITSELF

Hulk is part of HT’s Movie Masterpiece Series, which is their primary line. Hulk is number 186, which places him right after the previously reviewed Iron Man Mark VII in the numerical sequence. Hulk is just about 18 inches tall in height, and he features 18 points of articulation. 20 if you count the individually moving eyes. He’s based on Hulk’s design in The Avengers, obviously, but more specifically Hulk’s look during the final battle, which can be determined by the darker color of the pants.

Aside from a pair of tattered pants, the Hulk relies mostly on sculpting for his look. This is different from a lot of HT’s figures, but makes sense with the Hulk’s design. Hulk has a fairly unique body type, which means he got an all new sculpt to reflect that. The design is undoubtedly based on the 3D model designed for the movie, but it was sculpted by hand, so there’s a few areas that are a little off. Let’s start with what is on model. The head sculpt is virtually indistinguishable from the Hulk in the movie. You can definitely see some of Mark Ruffalo’s likeness shining through. It’s truly a magnificent head sculpt. The arms and legs are pretty similarly accurate. They have superb detailing, that makes this figure look possibly more lifelike than the CGI version in the film. The knee joints are a bit distraction, but they aren’t too had to hide with some careful positioning of the edges of the pants. This big issue is the torso. It’s just too… defined. One of the nice things about Hulk in The Avengers was that he looked like a real person. He had a certain degree of, for lack of a better word, flab. This figure doesn’t have that, and it diminishes the overall look ever so slightly. It doesn’t ruin the figure by any means, but it is a bit disappointing.

Paint work is one of HT’s strongest suits, and this figure is no exception. Every surface has amazing detail. There are beads of sweat on his face for Pete’s sake! That’s a serious commitment to detail. The teeth look like real teeth, minor yellowing and all. His skin is a bit uneven, his veins are a slightly different color from the rest of his skin. Everything looks absolutely spot on.

Perhaps the figures one downfall is accessories. Given the immense size, it’s forgivable, but it’s a bit of a bummer compared to other HT releases. As it stands, Hulk’s only accessories are a pair of alternate hands with poseable fingers. They aren’t a bad addition, but it would have been nice to at least get a stand with his name on it, just so he could fit in with the rest of the Avengers. Oh well.

THE ME HALF OF THE EQUATION

As is the case with most of the HT figures I own, Hulk was obtained via a pre-order on Sideshow Toys’ website. Like Iron Man and Captain America before him, Hulk was a figure I wasn’t quite sure I was going to get. But as pictures started to come in of the prototype, I got more and more impressed. I eventually folded, but not before the figure had sold out through Sideshow. Fortunately, they have a very helpful Wait List tool, which allowed me to get on the list in case someone else cancelled. Sure enough, someone did and I was able to get the jade giant for my collection. He’s the most I’ve ever paid for a single figure, but I don’t doubt for a minute that he was worth it. He’s definitely a stand out piece, and he makes The Avengers display work.

#0299: Marvel’s Valkyrie

Posted by Ethan Wilson in Reviews and tagged with , , ,

MARVEL’S VALKYRIE

AVENGERS INFINITE

Valkyre1

While Deathlok has just been granted a new lease on life by Agents of SHIELD, Valkyrie (or should I say “Marvel’s Valkyrie”) has not quite lucked out just yet. There’s certainly hope, I mean who though the Guardians of the Galaxy would be the next hit? So, here’s to Valkyrie getting her due! In the mean time, she was fortunate enough to get a figure in the most recent series of Hasbro’s Avengers Infinite. Perhaps her prospects are moving up!

THE FIGURE ITSELF

ValkyreWilsonValkyrie was released in Series Three of Avengers Infinite. She was originally meant to be released in a three-pack with the Executioner and a Thor variant, which would have been one of the final releases in the Marvel Universe line. When the set fell through, Hasbro moved Valkyrie over to the new line. The figure stands about 4 inches tall and sports 29 points of articulation. She’s based on the most recent Valkyrie design, which she wore towards the tail end of the first volume of Secret Avengers. It’s not too different from her classic design. She just traded in the cape for some pants, which seems like a fair move on her part. For most of her sculpt, Valkyrie makes use of the larger female buck from the Marvel Universe line, which first saw use on She-Hulk. It’s a pretty good body, with fairly normal proportions and some pretty great articulation, so its use here is acceptable. Valkyrie gets a newly sculpted head and hands. The hands are fairly basic gripping hands. Nothing really new there. The head is the star piece here, and it’s a pretty great sculpt. It captures Valkyrie pretty well, and doesn’t look too spaced out, a definite step up from quite a few female face sculpts. Valkyrie is molded in appropriate colors where possible, with some painted details for the silver areas, as well as detail work on the face and hair. For the most part, the paint is applied cleanly, although there are a few instances of fuzzy lines and slop. Nothing too distracting, though. Valkyrie includes a sword accessory, which is quite well sculpted and fits in Valkyrie’s hands pretty well. The plastic used is a bit on the soft side, but it’s workable.

THE ME HALF OF THE EQUATION

Valkyrie was picked up from my local comicbook store, Cosmic Comix, along with yesterday’s Deathlok and a couple others a few weeks ago. Valkyrie is a figure I had wanted since she was initially announced in the MU three-pack, so I was pretty eager to get her. Valkyrie is a character that’s only seen a few figures, which makes it even more important for her figures to be decent. Fortunately, this one is a pretty great interpretation of the character and an all-around great toy!

Valkyre3