Tag Archives: All Time Toys

#3274: He-Who-Remains

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

HE-WHO-REMAINS

MARVEL LEGENDS (HASBRO)

“A ruler. A conqueror. Creator of all. Controller of all. At the end, it is only HE Who Remains.”

Loki was full of a lot of things that would influence the greater MCU moving forward, and at the top of that list was the introduction of Jonathan Majors as He-Who-Remains, our first official Variant of Kang the Conqueror, the antagonist who’s set to serve as the MCU’s next big threat.  Appearing in Loki‘s season finale, He-Who-Remains is definitely a different sort of take on the character, who’s clearly got some Immortus leanings to him, as well as being merged with He-Who-Remains from the comics, who is, notably, not Kang at all.  Obviously, this guy’s not going to be our main Kang going forward, but he’s an interesting look at the frazzled, somewhat crazed man at the end of time.  And, hey, he’s got an action figure.  Let’s take a look at that, shall we?

THE FIGURE ITSELF

He-Who-Remains is figure 4 in the Khonshu Series of Marvel Legends.  He’s the second Loki-themed figure, following up on Classic Loki, as well as our fifth overall Loki figure in the line.  He’s also our second figure of an incarnation of Kang in the modern Legends, as well as the first figure of Jonathan Majors in the role.  The figure stands about 6 1/4 inches tall and he has 27 points of articulation.  He-Who-Remains’ articulation scheme is a little restricted by his design, but generally makes the most of it.  As with a lot of slightly more restricted figures, the character isn’t incredibly agile during his appearance on the show, so he’s certainly capable of doing pretty much whatever he needs to.  The only real downside to it all is that he can’t really lounge about the way he did in the show.  He-Who-Remains gets an all-new sculpt, based on his attire in the show.  His look definitely brings him closer to the Immortus side of things than the Kang side (and the initial concept even took it further by adding Immortus’s usual head gear), so he’s without anything particularly tactical.  He’s definitely far more for lounging about, which offsets pretty well with the TVA’s more bureaucratic design theming.  The sculpt does a pretty respectable job of capturing his look in plastic form.  His likeness is a good match for Jonathan Majors, and his expression is a bit lighter, which fits He-Who-Remains’ temperament in the show, and means that he’ll be different from the inevitable Kang figure.  The body sculpt captures his attire well, with decent hang and weight to all the drape-y stuff.  Some of the smaller details are a touch on the softer side, but I do really dig the embroidery on the shoulders.  The one area where the figure slightly falls is the paint.  It’s definitely not bad, just a bit lacking on the outfit.  He’s very bright, and there’s a lot of molded plastic without accenting, which looks a little too plasticky for his show look.  It really hits the robe hardest, since all that purple just ends up losing a lot of the sculpted detailing.  The other areas aren’t quite as bad, and the face in particular looks quite lifelike.  I also really dig the obsidian plate on his left hand, with its brightly colored veins.  He-Who-Remains is packed with his apple, which is a pretty distinctive item from his episode, and adds to our ever growing array of Legends foods.  He’s also got the head to the Khonshu Build-A-Figure.

THE ME HALF OF THE EQUATION

I’ll be totally honest, I didn’t have the highest opinion of the Loki finale.  After building up a ton of momentum, we spent an hour in a room with three people talking.  It wasn’t *bad*…but it did feel a little anti-climactic.  That said, I liked getting a preview of Kang, as well as the little nods to Immortus and Kang’s other incarnations.  It’s also a pretty unique design, and I’ve got all the other Loki figures, so it’s hard to pass that up.  This guy’s decent.  Not breaking the mold, and not my favorite, but he does what he needs to, and he looks pretty cool on the shelf.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3273: Classic Loki

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CLASSIC LOKI

MARVEL LEGENDS (HASBRO)

“The epitome of Loki potential! Powerful, carefree, and mischievous, this Loki’s decisions led to a long life, but that didn’t come without its own baggage.”

One of the coolest parts of Loki, which was admittedly a show with a lot of cool parts, was the introduction of “Variants”, or alternate timeline versions of characters we’ve seen before.  After introducing us to Sylvie, the main Loki’s distaff counterpart, the show took things even further as the season progressed, with a whole host of different Lokis.  Amongst them was “Classic Loki”, portrayed by Richard E. Grant, who is, for all intents and purposes, just a straight adaptation of Loki as he appeared in the comics in the ’60s.  He’s a rather glorious adaptation of the character, with a rather glorious focus and send-off, and now he’s also got an action figure.  Is it glorious?  Let’s find out!

THE FIGURE ITSELF

Classic Loki is figure 2 in the Khonshu Series of Marvel Legends.  He’s one of two Loki figures in this line-up, joining up with the other three we’d gotten up to this point in the main line.  Classic Loki is the first of the secondary variants of Loki to get figure treatment, but hopefully some of the others aren’t too far behind.  The figure stands 6 1/4 inches tall and he has 30 points of articulation.  This figure’s articulation scheme is surprisingly rudimentary, especially given where the line’s been headed recently.  It’s not terrible, or anything, and he does get that nifty pinless construction on the elbows and knees, which is always fun.  That said, the other movement is a little awkward, and the joint construction is a little out of date.  The waist is really where it gets hit the worst, with the flat swivel waist looking rather odd, and the hips not being even remotely worked in.  All that being said, the articulation is still generally workable, once you get used to it.  Classic Loki’s sculpt is all-new for this figure, and apart from the awkward articulation layout I mentioned above, it’s honestly pretty strong.  It matches well with the design seen on the show, and I quite like the way they weave the comics elements in with their real world equivalents.  He gets two different head sculpts, one sullen, and the other grinning.  Both of them sport a spot-on likeness of Grant in the role, and grant the figure quite a bit of versatility for posing.  Classic Loki’s color work is quite nicely handled; while his costume in the show stuck to his comics counterpart’s stark green and yellow coloring, it was also rather grimy and worn-in.  The figure has some decent accenting on the yellow sections, which makes him look appropriately disheveled.  Classic Loki is packed with a spare set of hands with magic effects, as well as extra magic effects for the wrists.  He’s also packed with the right leg to the Khonshu Build-A-Figure.

THE ME HALF OF THE EQUATION

The Loki variants were such a fun concept, and really showcase the high point of the show for me.  Classic Loki in particular was just a treat to watch, especially given how satisfying an arc he was given, even just in his single episode of focus.  I wasn’t sure we’d be seeing a figure any time soon, since he’s so similar the classic comic Loki from the Retro line.  I was definitely happy about his inclusion here.  His articulation’s a little wonky, but beyond that, I actually do really like the figure a lot.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3272: Agent Jimmy Woo

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

AGENT JIMMY WOO

MARVEL LEGENDS (HASBRO)

“Agent Jimmy Woo arrives in Westview to investigate the strange energy field surrounding the town.”

Jimmy Woo is a character with quite a backstory in the comics.  He predates Marvel’s boom in the Silver Age, first appearing as the hero of the antagonist-titled espionage series Yellow Claw, which saw him facing off against a yellow peril villain who was, surprisingly, neither the Fu Manchu, nor the Mandarin.  Yellow Claw ran only four issues in 1956-1957, but was remembered for being a surprisingly positive portrayal of an Asian-American hero.  Jimmy would resurface in the ’60s when he was made an Agent of S.H.I.E.L.D., a spot he’d stay in for most of his comics career.  He got a starring role again in Agents of Atlas, which reunited the ’50s Avengers, a team of heroes from Marvel’s pre-Silver Age days, with Jimmy as the team’s leader.  Jimmy’s introduction to the MCU came not as a S.H.I.E.L.D. Agent, or leading the Agents of Atlas, but instead as the FBI Agent assigned to Scott Lang in Ant-Man and the Wasp, before he was given a rather sizable (and quite redeemable) role in WandaVision.  He’s poised to do even more in the MCU, which is definitely fun, but the most important thing is that he’s got an action figure, which I’m taking a look at today.

THE FIGURE ITSELF

Agent Jimmy Woo is figure 1 in the Khonshu Series of Marvel Legends, which is the fourth Disney+ centric assortment of Legends.  It’s sort of an oddball mix of everything.  Jimmy is the only WandaVision figure in the mix, and the first one since the Wanda and Vision we got back in the first D+ series.  The figure stands just over 6 inches tall and he has 30 points of articulation.  He uses the Coulson body as his starting point, with a new head, arms, and an add-on for the jacket piece.  The old and new mesh pretty well, making for a figure that’s pretty cohesive, and a good match for Jimmy’s WandaVision appearance.  The head sculpt sports a rather spot-on likeness of actor Randall Park, complete with his slightly goofy smile that he’s always sporting as Jimmy.  The new jacket and arms give him a slightly more informal field jacket, which is a nice change of pace for the suited bodies.  The arms get the updated construction without the pins on the elbows, which is certainly a plus, and they lack the weird, oddly balanced split with the elbow movement that the other arms for this body had.  Jimmy’s color scheme is rather on the subdued side, as is accurate to the source material.  It’s largely molded plastic, but there’s some nice accent detailing on the jacket, as well as a quite nicely executed printing for the face.  Jimmy includes his FBI badge on a sculpted chain, as well as an alternate left hand holding his business card, which he has presumably just close-up-magicked out of his sleeve, like in the show.  It’s a small, but incredibly cool touch.  He also includes the left arm and staff to the Khonshu Build-A-Figure.

THE ME HALF OF THE EQUATION

Jimmy’s one of those characters that, even going back to his comic appearances, I never expected to get an action figure of.  Given his MCU incarnation is even less classically toyetic, I really wasn’t expecting to see him.  I was pleasantly surprised by his announcement for this assortment.  He’s an unexpectedly well-done figure, thanks to the commitment to detail.  The likeness is really strong, and the extra hand with the business card really sells it.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3267: Steve Rogers & The Hydra Stomper

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

STEVE ROGERS & THE HYDRA STOMPER

MARVEL STUDIOS WHAT IF…? (HOT TOYS)

“Who does Peggy Carter call in for backup when she needs it? Steve Rogers, of course. In this universe, Peggy Carter jumps into action with a number of familiar faces, but even she might need some help defeating the enemy. Calling in air support, she certainly doesn’t expect Steve to come swooping in – in a Hydra Stomper suit.”

Prepare for more formula breaking, as I interlude with yet another Hot Toys review outside of a monumental number!  I seem to be doing this far too frequently, don’t I?  It’s gonna make the monumental reviews not so special.  Ah, I don’t really care that much, honestly.  I just want to review the toys.  It’s kind of the whole purpose of the site, right?

In my last Hot Toys review, I was discussing my adherence to just Captain America stuff, and how that played into some alternate universe characters, specifically when What If…? is on the table.  While What If…? is a show I had generally mixed feelings about, I absolutely loved its first episode, “What If…Captain Carter Were The First Avenger?”  I’ve already got the HT Captain Carter, so there’s only one proper way to follow-up: The Hydra Stomper!

THE FIGURE ITSELF

Steve Rogers and The Hydra Stomper is a deluxe set of figures from Hot Toys’ Television Masterpiece Series, where it’s numbered TMS060, placing it just after Peggy in the numbering.  This marks the third What If…? offering from Hot Toys.  Like Peggy, this set stuck pretty close to its original anticipated release date of the end of 2022/beginning of 2023, though it did stick to the earlier end of the window.  There are two releases of the Hydra Stomper available; just the Stomper on its own is available as part of the Power Pose Series, and then there’s this set, which adds in the full pilot Steve Rogers figure to the mix.  Clearly, there was no way I was just doing the Stomper when there’s also a Steve available, right?  Right.

Steve is technically the actual “figure” here as classified by HT and Sideshow (to the point of being the one with an actual classic HT-style box), so I’ll kick things off with a look at him first.  The figure stands just over 11 inches tall and has over 30 points of articulation.  Steve’s head sculpt, much like the Captain Carter figure, is an animation-inspired piece, rather than shifting him to a realistic style like a lot of Hot Toys offerings.  As with the Peggy sculpt, there’s still a degree of an Evans likeness present here (albeit, the shrunken down and skinny Evans likeness from early in The First Avenger), so you can tell who it’s supposed to be.  It’s a good match for the design as seen in the show, and it’s nice, clean, and slick.  The paint work emphasizes the animated look further, while still maintaining the usual high Hot Toys standards.

Steve’s outfit is generally pretty simple (which is true to the show), being a rather standard loose-fitting jumpsuit.  There’s an underlying shirt, albeit without any sleeves.  You won’t notice, of course, since the suit’s not designed to be removed.  Further tailored items include some harness straps and a removable back pack.  There’s also a sculpted buckle for his belt, as well as a pair of feet that look like boots.  Under the outfit, he’s got a rather small and scrawny base body, matching well with his pre-serum build.  It’s a rather nicely articulated base body, which makes for easy posing.

Steve gets a rather modest selection of extras, with three sets of hands (L and R relaxed, L and R pointing, L gripping, and R flat), and a display stand that matches with the one included with Peggy.

Moving past the Steve Rogers figure, let’s take a look at the thing that takes up the vast majority of the package space here: The Hydra Stomper!  The figure stands a little over 22 inches tall and has 8 points of articulation.  On its own, the suit is part of Hot Toys’ Power Pose Series, which is their way of releasing Iron Man armors at a cheaper price by cutting back on articulation in order to simplify the engineering.  As such, this figure only gets movement where it absolutely *needs* it, rather than just sort of all the places it naturally would.  All things said, the posability is still better than I’d expected.  In particular, the fully articulated fingers are really impressive.  The only area that’s truly restricted is the lower half, but on the plus side, it does keep him very stable on his feet.  His sculpt is, as expected, quite impressive.  It’s very clean and sharp, and a spitting image of the design as seen in the show.  The figure is designed to allow Steve to actually sit inside; it’s a bit tricky to get him in there, and he’s a little cramped, but it’s cool to have the option. There are light up features worked into the eyes and the torso, both of which are battery operated independently from each other.  The Hydra Stomper is packed with a flight stand, which affixes to the belt line of the figure.  It holds him rather securely horizontally, allowing for a more stable point for Peggy to hold onto the back like in the episode.  It’s a little tricky to get it all properly posed and secure, but it’s fun that the option is there.

THE ME HALF OF THE EQUATION

As I mentioned in the Captain Carter review, this episode was by far my favorite of What If…?, and I was honestly already kinda sold on these even before seeing the show.  The Hydra Stomper design is just one that really works for me, and as soon as I saw this figure, complete with the Steve Rogers, I was sold on getting this set and the Captain Carter.  Since I got Peggy from Jason at All Time as a Christmas gift, this sort of became my Christmas gift to myself, I suppose.  It’s huge, it’s impressive, and it’s just a whole lot of fun.  And I’ve even made shelf space for it already, so I don’t even have that whole thing looming over me!

Thanks to my sponsors over at All Time Toys for setting me up with this set to review.  If you’re looking for cool toys both old and new, please check out their website.

#3261: Captain Carter

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CAPTAIN CARTER

MARVEL STUDIOS WHAT IF…? (HOT TOYS)

Greetings and welcome to a brand-new year, faithful readers!  Today’s important thing is the official kick off the post-Christmas reviews.  Very fancy stuff.  Notably, I’m also breaking formula, and totally writing a review of a Hot Toy, but not on a big review number.  Look, I’ve got a new Hot Toy, and I don’t really feel like waiting over 200 reviews to get to it, okay?  When last I was discussing Hot Toys, I had two different Captain America reviews, and indicated that was kind of the path I’d be sticking to for Hot Toys going forward.  Today’s focus sticks with that, more or less, albeit in a sort of an alternate universe capacity.  Yes, straight from 2021’s What If…?, I’m taking a look at a very fancy version of Captain Carter, Margaret “Peggy” Carter’s super soldier alter-ego!

THE FIGURE ITSELF

Captain Carter is the second figure in the What If…? component of Hot Toys’ Television Masterpiece Series, which is their “small screen” equivalent to their longer running Movie Masterpiece Series.  She’s figure TMS059, placing her right between Zombie Hunter Spidey and the Hydra Stomper.  It’s a nice little stretch of What If…? figures there.  Peggy stuck pretty much spot-on to her original release date of fourth quarter 2022, hitting back in early November.  Captain Carter is based on her WW2-era outfit from her debut episode, which is definitely the more distinctive of her two looks (it also pairs well with the upcoming Hydra Stomper).  The figure stands about 11 3/4 inches tall and she has over 30 points of articulation.

Captain Carter’s head sculpt marks a change for the usual Hot Toys stylings.  They most often got for hyper realism, even when adapting non-realistic designs (as highlighted by the Clone Wars characters in their larger Star Wars line), but the What If…? figures are instead sticking closer to their actual animation models.  This appears to possibly be a licensing thing, since the Legends figures were the same way.  Whatever the case, the spot where this is most evident is the head sculpt.  The sculpt is much smoother and streamlined than your typical Hot Toys head, but it’s nevertheless a really strong likeness of the character as she appears in the show.  It’s still got a respectable likeness of Hayley Atwell, making her fairly easily recognizable.  She includes two different pieces for the back of her hair, allowing for either a relaxed hang, or something a bit more dynamic.  They’re both attached via magnets, so they swap out and hold in place pretty nicely.  They also both work really well for their respective looks, and add a nice bit of variety to what you can do with the figure. As with the sculpting, Captain Carter’s paint work is a bit different from the usual, with something a little cleaner and bolder.  The application’s still really strong, and she’s got enough realism to her that she doesn’t stand out too much from other figures Hot Toys has done.

The bulk of Captain Carter’s costume is a single piece jumpsuit, in contrast to the usual two-piece set-up we’ve seen on the Captain Americas.  That said, she’s still got that layered look like the Caps have, so as to properly recreate all the cool little details of the costume.  On mine, the mid-torso stripes do seem *just* a tad off-center, just careful posing makes them look just fine.  The suit is topped off with a shoulder harness, a belt, and boots, which are all plastic add-on parts.  Like the more recent Captain Americas, the boots use a two-piece construction, so that the ankles can still properly move.  The belt and harness just being plastic is a slight step-down from the cloth construction on the other Caps, but it also tracks a bit better with her more animated appearance.

Peggy’s underlying base body is a rather basic one, which seems to go more for function over form.  It’s a fairly standard female base body, albeit one that’s a little taller than the usual.  It’s generally a pretty good match for Peggy as seen in the episode, although, if I’m honest, I do feel like she’s still perhaps a bit too short for her appearance in the show.  Likewise, her shoulders seem a little narrower.  Beyond that, though, it does work okay.  The posability is pretty decent, especially in the arms.  The hips are a bit restricted, but that’s more about the costume design than the actual body.

Captain Carter gets a pretty decent selection of extras, covering all of the basics for what she’s got in her episode.  Included are:

  • 7 hands
  • Shield
  • Hanger for shield
  • Sword
  • Handgun
  • Display stand

The hands included are two fists, two gripping, two relaxed, and a right hand with trigger finger.  The shield is smaller than Steve’s (which is either accurate or not, since it’s scale fluctuated depending on the shot), but it’s still similar to his in construction and detailing.  The straps can unhook just like Steve’s, and there’s a hook for hanging it on her back.  The sword is based on the one she grabs during the first episode’s climactic battle, and it’s nice and sharply detailed.  The handgun is a little simpler than other HT weapons, which I’ll admit I was just a tad bummed by, but it’s not going to get much use by me anyway.  Her display stand goes with the hexagonal shape, with a printed design based on the What If…? branding, as well as her name on the front.

THE ME HALF OF THE EQUATION

The Captain Carter episode of What If…? is far and away my favorite of the show’s first season.  I’ve been very excited for all of the tie-in stuff for it.  While I’m keeping it lighter on the HT side still, I’ve got that soft spot for the Captain America-related stuff, and I’ve honestly been wanting an HT Peggy of some form since The First Avenger.  Now, you’ll notice that I said this figure was kicking off the post-Christmas stuff.  I got this one courtesy of All Time’s owner Jason, who gave her to me as a very generous Christmas gift.  She’s pretty awesome, and I’ve very excited to pair her off with the Hydra Stomper figure!

#3258: Silk

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SILK

MARVEL LEGENDS (HASBRO)

“Bitten by the same radioactive spider that gave Peter Parker his powers, Cindy Moon develops spider powers of her own and soon takes on the role of Silk!”

Marvel’s Original Sin cross-over from 2014 was one with a few lasting changes, none of them particularly huge status quo shifts, or anything, but notable none the less.  It officially added Neil Gaiman’s Angela to the Marvel universe by revealing her to be Thor and Loki’s long-lost sister, came up with a convincing way to write out the original Nick Fury so that his son, Nick Jr, who happens to more closely resemble the Samuel L Jackson version of the character, could replace him, and, most relevantly for today’s review, revealed that the spider that bit Peter Parker had also bitten his classmate Cindy Moon, giving Cindy her own set of abilities.  Cindy was worked back into the mainstream universe during the battle with Morlun and his family the Inheritors, having been hidden away for years to keep her protected.  She was given the codename Silk, and spun (heh) off on her own, though she does find her way back to the main Spidey book from time to time for cross overs.  Silk’s actually been pretty fortunate in terms of raw numbers when it comes to toy coverage, though perhaps a little bit less so when it comes to actual distribution.  It’s okay, though, because I finally got one.  So, let’s look at Silk!

THE FIGURE ITSELF

Silk is an part of an Amazon-exclusive Marvel Legends two-pack, which was released under the “60 Amazing Years” banner that’s celebrating Spider-Man’s anniversary. The other half of the set was a Doc Ock, which is just a slight adjustment on his figure from back in 2018. This Silk marks her third time in Legends form, following two solo releases.  This one is based on Cindy’s most recent look, which sports shorter hair, and a slightly more vibrant color palette.  It’s honestly my favorite of her looks thus far, so that works for me.  The figure stands about 6 1/4 inches tall and it has 29 points of articulation.  Silk’s largely built using the same patchwork body as Spinneret, which, apart from the ever evolving ports on the back of the torso, is honestly a pretty solid base body, and certainly a good match foe Silk’s usual depictions in the comics.  It’s also a good deal more posable than her last two figures, which feels more appropriate for a web-slinger.  Silk gets a brand-new head sculpt, and it’s honestly the nicest sculpt she’s gotten to date.  It’s certainly the first one to really capture her Korean heritage, which is definitely a plus, and I really like the more naturalistic approach to the detailing, as well as the ever so slight windswept look to her hair.  It’s enough to look somewhat dynamic, without looking too crazy.  Silk’s color work is based on the bolder palette of her newer design, so she’s definitely got some visual pop.  The application is generally pretty cleanly handled; there’s a little bit of slop on the edges of the white sections, but it’s pretty minor.  The head does quite well, with the printing for the eyes looking quite lifelike, and the subtle blue accenting on the hair really bringing out the sculpted details.  The figure is packed with an alternate unmasked head for Cindy, with a corresponding pulled down mask piece, as well as three pairs of hands (fists, gripping, and open gesture) and an extra right hand with a web effect.  It’s quite a nice selection of extras, and covers pretty much all of the bases.

THE ME HALF OF THE EQUATION

Silk’s introduction was, admittedly, a little clumsy (something even her creator Dan Slott has admitted in recent years), but she got better pretty quickly, and she’s been a pivotal character to a couple of Spider-cross-overs since.  I missed out on her first figure because that wave showed up effectively nowhere, and her second because I just underestimated how quickly it would sell.  I was poised to miss this one, too, since I didn’t really need another Doc Ock, but I was fortunate to get just Silk on her own when one got traded into All Time.  She’s actually quite a lot of fun, and getting this version makes me kind of glad I missed the other two.

#3257: Axe Woves

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

AXE WOVES

STAR WARS: THE BLACK SERIES (HASBRO)

“A skilled warrior, Axe Woves is loyal to Bo-Katan and is a member of a band of Clan Kryze Mandalorians striking back at the Imperial remnant”

When Bo-Katan Kryze made her first appearance in live action during The Mandalorian‘s second season, she was accompanied by two other Mandalorians: Koska Reeves and another guy.  Today, we delve into the other guy.  Okay, the other guy actually does have a name: it’s Axe Woves.  That’s a name that’s really just peak Star Wars naming, honestly.  And it really should be, since Axe was actually named by none other than George Lucas himself, who named Bo-Katan’s then un-named Lieutenant during a set visit whilst Season 2 was in production.  Unlike Koska, who re-appeared alongside Bo-Katan for Season’s finale, Axe has thus far only appeared in the one episode, but is rumored for a Season 3 return.  Perfect time for some action figure coverage.  Let’s take a look at that, shall we?

THE FIGURE ITSELF

Axe Woves is part of the first main assortment of Star Wars: The Black Series‘s 2023 line-up.  Clearly, he’s a little early.  It’s okay, so’s pretty much everything else.  He’s part of the Mandalorian sub-set of the line, of course, and he’s figure 25 in that numbering scheme.  The figure stands roughly 6 inches tall and he has 28 points of articulation.  In terms of construction, Axe is largely built on the bank of parts first seen on the Death Watch Mandalorian from earlier this year.  He keeps the same articulation scheme from that release, which is to say that he poses pretty well, and certainly on-par with a modern Black Series figure.  Axe gets two new pieces thrown into the mix, a new un-helmeted head and a new belt/lower abdomen add-on.  It’s otherwise just the Death Watch Mando, which is fair, since there are a number of shared armor pieces between the two.  The new head sculpt bears a passable resemblance to actor Simon Kassianides (who, it should be noted, has an oddly close resemblance to the Saga-era Jango Fett head sculpts), though it’s not as spot-on as other sculpts in the line.  Axe’s paint work pretty decent for the most part; it’s on par with other recent offerings, and there’s some rather nice weathering to the armor.  The only slight misstep is the face paint, which, at least on my copy, has the eyes set ever so slightly higher than they should be.  It’s not crazy, but it’s definitely off.  Thankfully, amongst his accessories is his distinctive Mando helmet, which is a re-use of newer Boba Fett mold.  It doesn’t sit quite as well on this figure’s head, but it overall works.  He’s also packed with his jet pack and a small blaster pistol, both of which are re-used molds.

THE ME HALF OF THE EQUATION

Once we had both Bo-Katan and Koska, it was just a waiting game for Axe, since it’s not like they’re gonna leave one Mando undone, right?  Axe is exactly the sort of background character that would fascinate me in older Star Wars entries, and that came through on the newer stuff too.  I dig his look, I dig his name, and I dig the background behind it all.  He’s not a perfect figure, but he’s a pretty fun one, and a good by-the-numbers offering.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3255: Protocol Droid – Holiday Edition

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

PROTOCOL DROID — HOLIDAY EDITION

STAR WARS: THE BLACK SERIES (HASBRO)

“Protocol droids like C-3PO are vital in smoothing differences encountered by the many farflung cultures interacting on a regular basis throughout the galaxy. Most are humanoid, like the company they keep.”

‘Twas two nights before Christmas and all through the house, Ethan was reviewing something festive two days before the actual holiday because both Christmas Eve and Day fall on the weekend this year, and he’s not doing reviews those days anymore.  Okay, maybe that version’s not quite as catchy as Clement Clarke Moore’s.  But I still think it’s got potential.  Look, the point of it all is that I’m gonna do this whole holiday cheer thing.  I’m cheerful, dang it.  So, please look at this overly commercialized cash grab product review as proof.  For the cheer.  And the jolly.  Perhaps even some whimsy.  Since 1978’s “The Star Wars Holiday Special,” the Star Wars franchise has been cashing in on the holiday cheer, though on the toy side of things it’s a more recent development.  Hasbro had a solid run of one-off holiday offerings in the early ’00s, but took a bit of a breather, before returning to it in 2020 with a whole mess of themed figures under their Black Series branding.  They were each exclusive to a different retailer, and were generally a bit of a pain to track down, so I avoided most of them.  This year’s follow-ups, however, included a Fan Channel offering, and so I’m taking a look at a delightfully festive Protocol Droid today!

THE FIGURE ITSELF

The Holiday Edition Protocol Droid is one of the five 2022 Holiday Edition offerings for Black Series.  He’s a Fan Channel exclusive, and started shipping out in early November of this year.  He’s apparently got no official name, which, if I’m honest, feels like a missed opportunity.  Why no fun little in-joke with the naming?  For shame.  Oh well.  The figure stands 5 1/2 inches tall and has 21 points of articulation.  In contrast to the most recent Protocol Droids we’ve gotten from The Black Series, the Holiday Protocol is built on the first iteration of the C-3PO mold.  It’s generally not a bad mold, but this older version means that this release lacks the added elbow articulation that all figures post 4-LOM have gotten.  It’s a little bit of a bummer.  Not the end of the world, but a bummer to be sure after getting the improved arms on so many figures.  In order to mix things up and go just a tad more festive with the mold, the Holiday Protocol gets a scarf piece, courtesy of Lando. Beyond that, the change-ups are all paint.  This guy’s been done up in a variety of red, white, and green, which all feels appropriately festive.  On one hand, I’m a little sad we didn’t get any of the ugly sweater patterning that the troopers have been getting, but on the other, I can appreciate this one going with a different angle.  I do really like the striped “socks,” and this printing on the scarf is certainly a lot of fun.  Each of the Holiday Edition figures is packed with a smaller companion, and in the case of the Protocol Droid, it’s a re-decoed BD-1, who’s been done up to match the Protocol Droid.  He’s the same mold as the Fallen Order releases, which is honestly a pretty great mold, and he’s probably my favorite thing about this set.

THE ME HALF OF THE EQUATION

I’ve passed on the other Holiday figures up to now, since, as I touched on in the intro, I didn’t really feel like hunting them down.  This year was pretty much the same deal, but since this one was going through Fan Channels, I had the opportunity to get one through work.  I don’t know that he’s really my preferred of this year’s offerings, but he was easy to get, and that’s really what matters, right?  The main droid’s okay.  He’s kitschy and goofy, but that’s what I expected.  BD-1 kind of steals the show here, but that’s just kind of the history of that mold, now isn’t it?  And that’s all I got until after the holiday.  Have a good one everybody!

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

 

Flashback Friday Figure Addendum #0019: Han Solo

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , ,

HAN SOLO

STAR WARS: THE BLACK SERIES ARCHIVE (HASBRO)

Check this out!  Doing three whole Flashback Friday Figure Addendums in one year!  I haven’t actually done that since I launched them in 2017.  Weird.  It’s once again a Black Series figure that’s getting the treatment, thanks to Hasbro going back and redoing a lot of the pre-face-printing figures with the appropriate upgrades.  The last few I’ve looked at have been from the main line, but today I’m switching over to their Archive line, with my first Archive figure that I actually got the first time around.  So, let’s look at The Force Awakens Han Solo, whose original release I looked at back in March of 2016.

A lot of (very much deserved) praise has been heaped on the new cast members introduced in the Force Awakens, but one of the coolest things about the movie was the return of some of the “old guard” from the Original Trilogy. The most prominent returning hero by far was everyone’s favorite scuffy-lookin’ nerf-herder, Han Solo. For a number of reasons, Han, along with most of the other returning characters, was absent from the first few waves of Force Awakens product, but the merch based on him is starting to hit in full storm. Today, I’ll be looking at his much anticipated Black Series figure.

THE FIGURE ITSELF

Han was released in the fifth series of the latest iteration of Star Wars: The Black Series. He’s marked as number 18 in the line, which makes him the last figure in this particular series numerically. The figure stands just over 6 inches tall (which is the same as his A New Hope figure) and has 27 points of articulation. Some of the movement, most notably his hips, is a little restricted, but he can certainly pull off just about any pose that the real Harrison Ford can. Han’s sculpt is totally new, and it’s an amazing piece of work. The proportions look great, certainly better than the last Han, and the detail work on the clothing is just fantastic. The jacket in particular has some amazing texture work, which adds a lot of character to the figure. The shirt and underlying belt are a little on the soft side, and I’m not sure I’m a fan of the pose on his left hand, but those are my only real complaints. The real draw of this sculpt is the likeness. Harrison Ford has a notoriously hard to capture likeness, but this is perhaps the best one we’ve ever seen. There are a few angles where it looks a bit off, but the overall appearance is very close. Now, you may be thinking that, based on the pictures, he really doesn’t look as close as I’m saying. Well, here’s where the paint comes in. For the most part, the paint’s great. The clothing (particularly the coat) has some really great work, which really sells this as a real person. My first nit is the eyes; they aren’t terrible, but they’re a little sloppier than I’d like. However, the major issue here is the hair. The application of the paint is alright, but there’s no getting around the fact that it’s simply the wrong color. Instead of being mostly grey with maybe a few streaks of light brown, it’s light brown with just a few streaks of grey, resulting in him looking a fair bit younger than he should. It’s really annoying, because it seriously throws off an otherwise really great figure.* Han only includes one accessory: his signature blaster, which is a totally different mold than the one included with the Series 2 Han.

THE ME HALF OF THE EQUATION

When I found out this figure was hitting stores, I was anticipating him being a chore to find. So, I was pleasantly surprised to walk into my local Target and find him hanging on the pegs, hiding behind a pair of Jango Fetts. I’m not sure I can adequately describe just how much I like this figure. He’s hands down the best Han Solo figure I own, and possibly one of the best Black Series figures to date, and certainly the best of the Force Awakens figures. Yes, the hair thing is annoying, but this figure outshines all those issues, and is just a ton of fun to mess around with.

I think, perhaps, the most dated part of the whole above review is how Jango was the figure I was pushing aside to find this guy.  Believe it or not, when this series hit, the Prequel resurgence hadn’t quite hit in full force yet, and, with the general hype machine that was still going behind The Force Awakens, Han was actually the more desirable figure.  How times have changed on that one.  Beyond that little diatribe, my review of this figure is pretty spot-on, I think.  This was definitely Hasbro’s best Han Solo sculpt for the line at the time, and even now is still a pretty high contender.  I think he gets edged out by Bespin Han, but that’s really it.  I was critical of the original figure’s paint, and clearly that’s the one thing Hasbro wanted to fix, so I must have been onto something there.  And fix it Hasbro did.  The new paint is absolutely night and day.  There was apparently some sort of contractual thing preventing the hair on any Han Solo merch from being a proper grey when it all hit in 2016, but it would appear that’s been lifted, and this figure’s all the better for it.  The new face paint is also perhaps the best upgrade from the entire line, and they’ve even improved on the already high quality paint on the body.  He’s really just an all-around win.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3254: Cobra Viper Officer & Vipers

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

COBRA VIPER OFFICER & VIPERS

G.I. JOE: CLASSIFIED SERIES (HASBRO)

Does this count as the eighth entry in the Day of the Vipers if that day actually wrapped up four years ago?  Eh, I’m gonna count it.  I love me a continuing bit.  So, for Part 8 of the exceedingly long Day of the Vipers, we’re jumping to the far-flung year of 2022.  Woooo.  The future is now.  After revamping the brand and moving to a 6 inch scale in 2020, Hasbro added an updated Cobra Viper to the line in the form of a rather impossibly hard to find Target exclusive, which hit in early 2021.  It was decidedly not so much fun for the fanbase.  To make it decidedly more fun for the fanbase, Hasbro decided to follow-up the initial Viper with a whole pack of Vipers.  I am much excite.  Very much excite.

THE FIGURES THEMSELVES

The Cobra Viper Officer and Vipers three-pack is a stand alone release for G.I. Joe: Classified Series, and is numbered 47 in the line-up, fitting the continuing trend of absolutely nothing in the Classified Series going un-numbered.  It’s still kind of amusing to see it on such a large-boxed item, though.  The pack includes the Officer and two rank and file Vipers.  All three are built on the same sculpt as the Target-release Viper, with the Officer receiving a complete paint overhaul and the two Vipers getting some minor tweaks.  Of note, all three uses of the mold have a slightly different composition on the plastic for the goggles, so they fit a little bit better than the first release.

The Cobra Viper Officer is actually a rather new concept, since the Vipers have classically been seen as the lowest on the totem pole, meaning their commanders would just really be any other Cobra officer.  When the Viper molds were re-purposed to be a Cobra Officer and a Cobra Trooper in 1998, Hasbro added a little bit of ranking with the colors, but not officially applied to Vipers proper.  Our first taste of the concept for Vipers originated in 2006’s Viper Pit set, which amongst its six Vipers included one with a golden face plate, albeit with no denotation of any added rank.  In 2014’s 50th Anniversary line, we got our first proper Viper Officer, who got not just the changed face plate, but a whole new color scheme as well.  That figure seems to have served as the primary inspiration for the figure seen here, though they do both seem to take at least a page out of the 1998 Cobra Officer’s book in terms of coloring.  The figure stands 6 1/4 inches tall and he has 35 points of articulation.  Since the sculpt is the same as the first release, the main change-up here is the colors.  This guy pretty much just copies the 50th color scheme, translating the officer to primarily light grey, with some red accenting, as well as the expected gold for the visor.  The application is generally pretty clean, though there’s some fuzziness on some of the change-overs, as well as a bit of slop at the edges of the forearms.  The depth of detail on the paint is also a little more involved than on the prior figure, with things like the lenses of his goggles getting their own coloring as well, which gives him a little extra polish.  The Officer gets the same scarf used on the Target figure, as well as a backpack in an updated color scheme, and a unique pistol, which even has a port at the front for effects pieces.

Backing up the Viper Officer, there are two lower tier Vipers.  By design, they’re meant to be interwoven with the Target-exclusive release, allowing those who already got some of those to not have to start over from square one.  Exactly how well that works is up to some debate, though.  There are a few little changes, not just from that release to this one, but also between the two figures in the pack together here, as well.  As with the Officer, these guys share their construction with the standard Viper, with their color scheme being the differentiating thing.  These two are very similar to the standard Viper, but the reds and blues are both shifted to be a little less saturated and just a touch darker.  It’s nothing major, and something that can be easily missed when not comparing the releases side by side.  But, if you’re some sort of weirdo that has to have every possible version, well, I guess you’ll see it.  The application is largely consistent with the prior release, but there’s the extra detailing again on the goggle lenses, to match up with the Officer.  I really like it.  While the standard Viper, as well as all prior Vipers from the brand up to this point, stuck with a consistently lighter skin tone, this set adds in just a little bit of diversity to the Cobra ranks, with one of the two Vipers sporting a noticeably darker pigment to his neck and forearms.  The other Viper is *supposed* to be lighter skinned, but, well, that’s not exactly how it worked out.  The neck is the intended color, but the forearms are the same darker brown as the other guy, meaning his skin tone doesn’t match.  I at first thought it was a fluke on my set, but after checking out a few additional sets, it appears this is an across the board issue for this release.  It’s not the end of the world, since the forearm bracer’s totally hide the issue, but it’s frustrating that you don’t get the option to go sans-bracers, since that’s kind of my preferred look.  Both rank and file Vipers are packed with the scarf, the back pack (with slightly tweaked colors), and the same sidearm as the Target Viper.

In addition to the parts that are clearly tied in with each of the specific figures in the set, there are also a selection of accessories that can go with any of the three.  There are two of the rifle included with the Target Viper, three different styles of more realistic assault rifle, a silencer, and nine different blast effects, which can be fitted onto all but the standard Viper sidearms.  The extras here are really great, because they do a great job of selling the army building potential, given how many options there are here with weaponry.

THE ME HALF OF THE EQUATION

Have I mentioned that I really like Vipers?  Because I do.  I was not thrilled about the first one being a Target release, since it made doing any sort of army building pretty much impossible.  By a stroke of luck, I got two of those, but I was certainly not counting on getting any more.  I was very happy when this set was announced, and I like being able to just get a squad in one swoop.  The Officer’s a fun concept, and I like his uniqueness.  The two standards are just different enough to be different.  I do like the new colors and the improved paint apps, as well as all the cool new goodies.  I’m not thrilled about the mix-up on the one Viper’s forearms, and I’m curious to see how that pans out in the long run, and if Hasbro chooses to address it in any way.  I’m not expecting it, but I’m curious.  As it stands, that’s my one flaw on a set I otherwise really, really like.

Thanks to my sponsors at All Time Toys for setting me up with these figures for review.  If you’re looking for toys both old and new, please check out their website.