Tag Archives: DC

#0216: Batman – Power Armor

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BATMAN – POWER ARMOR

BATMAN BEYOND

In the 90s, the DC Animated Universe was in its prime. Kenner held the license for the toys, and they were doing some pretty great stuff too. Batman: The Animated Series got a great line, with the majority of the characters seeing release. Sure, it wasn’t all winners, but it was a decent line.  Superman: The Animated Series came along, and while Kenner didn’t quite have the nice selection that B:TAS had gotten, most of the key characters had been released in their basic looks. And then, there was Batman Beyond. Oh, boy was there Batman Beyond. The show was great, but the toyline released along with it was… strange to say the least. For starters, they never actually released a proper normal Batman, and the supporting cast and villains were pretty much non-existent. They weren’t bad toys per say, but they didn’t do the cartoon justice. Case in point, today I’ll be looking at the line’s release of BB’s alter ego, Terry McGuinness, wearing that red and gray power armor he was so known to wear…

THE FIGURE ITSELF

Okay, officially, this wasn’t a Terry McGuinness figure. He was actually labeled “Power Armor Batman” on the box. Let’s be real here: people didn’t buy this figure because it was “Power Armor Batman,” they wanted the Terry McGuinness head. Anyway, the figure was released in one of the later assortments of the first series of Kenner’s Batman Beyond line. The figure stands a little over 5 inches tall and features 5 points of articulation. Kenner were big fans of the 5 and 5 set-up. From a purely technical standpoint, the sculpted work on the figure is pretty top notch. The circuits in his underlying suit look great, and the head is the spitting image of Terry’s appearance on the show. Stylistically, the figure’s body sculpt is completely wrong for the designs of the show, but it was in keeping with the rest of the line, so at least Kenner was consistent. The paint work is passable, with no real slop or bleed over (though mine has suffered some minor wear). For some reason, they’ve gone with a bright red and gray color scheme. Terry’s Batsuit on the show had red circuitry, so I suppose that’s what they were going for, but the light gray armor is just plain weird. The figure was accessorized with several snap-on armor pieces, a removable helmet, and a robotic bird. It’s red, green and yellow, so maybe they were going for a Robin thing? Yep, according to the package, it’s a strike R.O.B.I.N. Okay then.*

THE ME HALF OF THE EQUATION

Odd variants aside, I was very excited for the Batman Beyond line at the time of its release. I actually recall seeing this figure at the store several months before I actually got one. I saw the figure on a trip to the store with my parents, who told me I’d have to get it some other time. Little did they know that it would end up being one of the harder to find figures in the line. So, months went by, and I just assumed I’d missed my chance at the figure. Then, on another routine trip to the store, I wandered to the toy aisle, where I found this figure, as well as Blight. My parents were more than happy to get them for me this time around. As strange as this line was, I still have a major soft spot for those two figures in particular. Plus, they actually are pretty good toys!

*While doing some research on this figure, I discovered that Kenner did a repaint of this figure in more appropriate colors for their Deluxe line. He was dubbed “Strikecycle Batman,” if you’re curious. 

#0209: Stargirl

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

STARGIRL

DC UNIVERSE CLASSICS

Stargirl

If you liked yesterday’s Aquaman review, you’ll be happy to know I’ll be taking a look at yet another DC Universe Classics figure today. This time around, it’s Stargirl, who is most commonly known for her association with the Justice Society of America. She’s one of DC’s better characters in recent years, and if you’d like to know more, you can check out her entry in the Backstories section, here.

THE FIGURE ITSELF

Stargirl was released in the 19th series of DC Universe Classics. The series was themed around the Justice Society, so her inclusion makes sense. Stargirl stands about 6 inches tall and features 25 points of articulation. Astoundingly for DCUC, Star Girl is almost an entirely unique sculpt. Only her forearms and boots are re-use, hailing from the 90s Supergirl from Mattel’s earlier line DC Super Heroes. The body sculpt is pretty decently done. She’s well-proportioned all around, and looks appropriate to the character. Sadly, the head doesn’t fair as well. They tried to give her a grinning expression, and she ends up looking a bit like the Joker. I’ll give them credit for trying something different, but it just didn’t work out. The paint work is all very clean, and I really like the metallic blue they used, but the head is once again hit the hardest. The paint on the teeth makes the sculpt look even worse, which is really sad. Stargirl includes her cosmic staff and a piece of series 19’s C-n-C, STRIPE. The staff is a nice piece, though it’s been molded in clear yellow for some reason, and she has a little bit of trouble holding it.

THE ME HALF OF THE EQUATION

Stargirl was picked up for me by my Dad. He found her in the store and knew I’d been looking for one, so he bought it for me. I know I kinda ragged on her, but I honestly don’t think Stargirl’s that bad a figure. Sure, the head sculpt leaves a bit to be desired, but I’ve seen worse and the rest of the figure is handled very well. Plus, it’s a character I like, so I’m just glad she got a figure at all.

#0208: Aquaman – Camouflage

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

AQUAMAN – CAMOUFLAGE

DC UNIVERSE CLASSICS

Aquaman(Camo)

Aquaman tends to get a bad rap. People are very quick to label him as “lame” or “stupid.” Now, I’m not one to tell people they aren’t true fans, or say my opinion is law or anything, but I feel like people that write the character off like that aren’t really looking at the character too closely. I mean, the guy lives at the bottom of the ocean. Dude’s gotta be super-jacked! Certainly not the kind of guy I’d want to make fun of.

That being said, in the 80s, Aquaman got a mini-series where he was given a new costume to replace his classic orange and green look. It was water camouflage.  It was lame. It was stupid. And, it was one of the versions of the character released in Mattel’s DC Universe Classics. “Ethan, if you think the costume is lame and stupid, why do you have an action figure of it?” Because shut up, that’s why!

THE FIGURE ITSELF

Aquaman was released in the 7th series of DC Universe Classics. He is in the aforementioned “Aqua-Camo.” The figure is about 6 ½ inches tall and features 25 points of articulation. He’s built on slightly larger male buck, which fits the king of the seas, I suppose. His head is reused from DCUC’s previous Aquaman figure. Yes, he was a total re-use figure. At least the reused parts are good pieces. The head sculpt is definitely one of the line’s stronger pieces. It has just the right amount of nobility and heroism that should be present in the king of Atlantis. One thing I did notice is that he has a slight mutilation on his face that results in some lines that shouldn’t be there. I actually like the look, as it kind of look like some cool scarring, but I imagine not everyone would be so thrilled. The paint work is pretty good. They’ve replicated the design of the suit very well, and it does really pop, which is always nice. It has a few fuzzy lines here and there, but nothing out of the ordinary for a DCUC figure.  Aquaman includes a trident and a piece of the series’ C-n-C, Atom Smasher. This is my first Aquaman I’ve reviewed on the site, so I’m gonna address this here: what is up with the tridents? Aquaman pretty much never carries a trident, and yet every single Aquaman figure’s got his friggin’ trusty trident!

THE ME HALF OF THE EQUATION

I purchased this figure for two reasons: I wanted to finish Atom Smasher, and the basic Aquaman was hard to find. Seriously, I’ve never actually seen the regular Aquaman in person. The series he was in was pretty much impossible to find. So, I had to settle for true blue here. He’s actually not a bad figure, even if I’m not the biggest fan of the costume. He also adds a nice splash (heh!) of blue to the JLA shelf.

#0207: Supergirl & Bizarro

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SUPERGIRL & BIZARRO

DC MINIMATES

Bizarro&Supergirl

Goodbye! Today, me no am reviewing figures from my least favorite toyline ever, Minimates. Me no am happy to be reviewing Minimates. They am terrible! Figures today not come from DC Minimates, a line which had too many series. Figures am two minor characters from DC’s least popular comic, Superman.

THE FIGURES NO AM THEMSELVES

Figures no am from 6th series of DC Minimates. They no am from near end of line.

PRETTY LADY S GIRL

Supergirl no am Superman’s cousin. She am very old lady, who am left on Argo, capital city of Krypton, which am destroyed before Krypton exploded. Supergirl am very tall figure, not based on normal Minimate body. She no features 14 points of articulation and am 2 ½ inches short. Supergirl have three old pieces. They no am right for the character. They am too skinny. Pieces am sculpted very rigid. Paint am okay. This am very bad. There am no interesting details. Supergirl’s face am very calm, and am same as others. Supergirl am well accessorized with nothing.

ME AM BIZARRO

Bizarro am original Superman. He am greatest hero ever and am great friend of Superman. He am not based on classic Bizarro, which am terrible! Bizarro am no based on minimate body, and no have normal features. Bizarro no have three sculpted pieces: hair, cape, and belt. Cape and belt brand new pieces and hair am re-use. Pieces no am good for figure. Am terrible representation of character. Bizzaro’s paint am no good. This am very bad. Slop am everywhere. Bizarro’s face am no detailed very well. He am very sad looking. Me Bizarro am include “Bizarro #1” necklace, which other Bizarro’s no am included. Me am happy about this.

ME AM THREE HALVES OF THE EQUATION

Ethan sell Bizarro and Pretty Lady S Girl from distant comicbook store, Cosmic Comix. Me no get them when they am unreleased. Me no am like them. They am terrible figures of characters. They am no important characters to Superman.

 

Confused?  This post was written in Bizarro speak.  If you’d like a translation, click here.

Guest Review #0003: Supergirl & Bizarro

Posted by Ethan Wilson in Guest Reviews and tagged with , , , , , ,

The  following is a guest review written by my brother, Christian Wilson.  Enjoy.

SUPERGIRL & BIZARRO

DC MINIMATES

Bizarro&Supergirl

Ahoy! This is life. Sometimes you don’t know where you’re going but you know where you’ve been. And that’s all that love’s about. But love is not about the Bizarro & Supergirl Minimate Tupac from probably the 6rd of 8 series of DC Minimates (Because why wait any longer!?). The rippling abs and pectorals before will be put to action immediately. Get ready for the BOON!

THE FIGURES THEMSELVES

These figures are like midgardians. Weak and tiny! As they both originate from Superman Descent (Yeah, that’s a thing I made up with mah brain powers), they both sport some Supes logos. These characters are like the stuff you’ve seen before only more backwards.

SUPERGIRL

I wouldn’t have put her first, she’s just boring, but cool at the same time! Supergirl sports a lady skirt, and some differently sculpted hair. Along with the cape, much work was clearly put into to this thing(if you will). There’s more than 6 articulation points and this makes Supergirl undesirabley angry for some reason. Just look at that face! If you would like to learn more about this robust lady of the lake, look her up on Wikipedia cuz I ain’t gonna draw her.

BIZARRO

This figure am horrible! That was bizarre speak for this figure’s is awesome! The character is captured well in his classic uniform and not some Smallville CW sh*t like before. This figure uses lots of parts from Superman surprisingly. With the exception of the paint being purplish and the backwards S in his chest, this figure is mostly the same but different in a good way. Like the Dred Scott Decision of 1857! If you would like to learn more better about this backwards guy, do as listed for Supergirl above!

THE ME HALF OF THE EQUATION

Ethan bought it on a day some years ago. Bro.

#0205: Hal Jordan, Sinestro, & Abin Sur

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

HAL JORDAN, SINESTRO & ABIN SUR

JUSTICE LEAGUE UNLIMITED

IMG_1737

It’s no secret that I’m a pretty big Green Lantern fan. Due to this, I own a metric ton of Green Lantern crap. Good or bad, I own it. There is, however, one Green Lantern item that I will never, ever, own. That is the Hal Jordan Green Lantern figure based on the character’s brief cameo in the Justice League Unlimited episode “Once and Future Thing.” Mattel decided to give this figure out as a gift to a number of Warner Brothers executives one year. I believe the number of figures in existence is in the low three-figures. Unsurprisingly, the figure rarely shows up on the aftermarket, and when one does, they go for prices far beyond what someone like me can reasonably pay.

So, I was bummed. I mean, Hal Jordan was one of my favorite characters of all time, and I would be unable to own him in the primary DC scale of the time. What a bummer! Then came the set I am reviewing today, offering me another chance at the character. No, it’s not the same, but it’s something, so I’ll take it.

THE FIGURES THEMSELVES

Hal Jordan, Abin Sur, and Sinestro were released as part of a San Diego Comic Con exclusive three pack, meant to sort-of promote Justice League: New Frontier. Hal and Abin are based loosely on their appearances there, and Sinestro is based on his GL look in the comics. All three feature swappable heads, to allow Hal to be displayed in either of his GL uniforms. It’s debatable as to whether it works or not.

HAL JORDAN

Hal is presented here in his Ferris Aircraft-issued test pilot gear. He stands just shy of 5 inches tall and has 5 points of articulation. He features a brand new head and legs, along with the basic medium build torso and arms and a coat add-on previously used on Mr. Terrific. The head looks pretty accurate to what Hal looks like in New Frontier, so that works. The re-use all works appropriately as well. The paint work is okay, though there are some fuzzy lines in a few spots.  Hal has no accessories, unless you want to count Abin and Sinestro…

ABIN SUR

Abin Sur is presented here in the GL uniform he wore in his original appearance. This was a bit of a contentious point amongst fans, because it’s not the design he sported in his appearance in the Animated universe. It was done to facilitate the Hal Jordan thing, but I guess I can see the annoyance. Abin is built on the medium build body with a brand new head. The head is a bit big for the body, but overall it looks nice, and the medium body was the best of the bucks Mattel used for this line. The paint is serviceable, though it also still has a few fuzzy lines.

SINESTRO

Sinestro is shown here in his GL uniform, which he never actually sported in any of the animated material, but they wanted to do the interchangeable heads thing, so there it is. Sinestro is a complete re-use. He’s built on the same medium body as Abin, and shares a head with the previous Sinestro figure. If it ain’t broke, don’t fix it. The paint is nice and clean, cleaner than the other two, in fact, which is something I suppose.

THE ME HALF OF THE EQUATION

I picked this set up off of Matty Collector following SDCC. It was mostly painless. It’s not the same as the super rare Hal, but this set isn’t too bad. It provides a perfectly fine version of Hal, and Abin and Sinestro are pretty cool too. It’s not a thrilling set, but it is cool for someone who’s a fan of Green Lantern, which is a bill I fit. Yay.

#0200: Selina Kyle/Catwoman

Posted by Ethan Wilson in Reviews and tagged with , , ,

SELINA KYLE/CATWOMAN

DARK KNIGHT RISES (HOT TOYS)

Wow, looks like I’ve made it to 200 reviews! It seems like just yesterday I was writing my last Hot Toys review for my 150th review. Since this is another milestone review, I’ll be doing another “Deluxe Review.”

It’s another figure produced by Hot Toys, a Hong Kong based toy company known for their very high-end action figures. They have a tendency to pick up the licenses for the various Super Hero movies, and this time around, I’ll be taking a look at Catwoman from their subset of Dark Knight Rises figures.

THE FIGURE ITSELF

Selina was released in HT’s Movie Masterpiece line, designated as figure MMS 188. She’s a little under 12 inches tall and features 28 points of articulation (At least, according to Hot Toys. I haven’t undressed the figure to check this, because that seems weird.). She’s based on Selina’s Catwoman look from the film.

THE HEAD IN QUESTION

The head is a very nice sculpt. HT’s strong suit is usually how close to the actors they look. I’m not sure if Catwoman’s head is a spot on Hatheway likeness, but it’s very close. The paint may also be a contributing factor to the somewhat off likeness. Typically, HT excels at paint, but in Selina’s case, they seem to have done something wrong with the eyes. Maybe the pupils are too small. The hair is not sculpted, but instead is rooted, in a similar fashion to a Barbie doll. Yeah, I know, it even further blurs the line between doll and action figure. However, it was the right call here, because sculpted hair would have severely limited the neck pose-ability and made the removable goggles impossible. Speaking of the goggles: yes, I’m sorry about the lack of sans-goggles pictures. I forgot to take them before putting the goggles on, and I certainly wasn’t going to try to take them back off.

THE COSTUME IN QUESTION

The costume is made up of six pieces: a jumpsuit, a belt, gloves, and boots. The jumpsuit is made of a nice textured cloth, and looks overall accurate to the one from the movie. My one complaint would be that the zipper seems a bit too bulky to be in proper scale. This is unfortunately one of the downfalls of attempting to work in this scale, but I feel it would be better served if they hadn’t actually made it a working zipper. The belt is a nice sculpted piece, and sits appropriately for the character. The gloves are simple slip-over pieces, held in place by the hands. The seam is cleverly hidden in the folds, which helps with making the figure more convincing. The boots are an impressive piece of work, being made of a leather like material, with a set of feet in the bottom, and plastic soles placed to keep the whole thing together. One issue I do have is that the costume does seem to look rather bulky around the torso. It’s not a huge issue, and it can be alleviated with a good pose, but I wish it was a little better.

THE ACCESSORIES IN QUESTION

Selina features a decent assortment of accessories, but not quite as many as some of the previous HT figures I’ve reviewed. They are:

  • Goggles
  • 7 interchangeable hands
  • Hand gun
  • Batman Cowl
  • Display Stand

The goggles are the most important accessory, as they complete Selina’s costumed look. They are a bit difficult to get on the figure, and quite fragile, so take care. Once they’re on the figure, they fit pretty snuggly, and look accurate to the source material. The arms allow you to flip them up out of her face, re-creating her “cat-ear” look from the film. It’s a nice feature, but it does mean that the piece is quite prone to breaking if you aren’t careful.

There are seven hands: two fists, two open gesture, one with a trigger finger, and two gripping. The fists and open gesture allow for a nice selection of basic poses. The trigger finger holds the hand gun pretty tightly, which is nice. The gripping hands were meant to work with the Bat Pod released around the same time. I don’t have it, so they aren’t of much use to me, but they are a nice inclusion nonetheless.

The hand gun is the usual HT fair. Moving parts, removable clip, and crisp details. Not much new here.

The empty Batman cowl was the item included with the release of this figure available exclusively through Sideshow Toy’s website. It’s based on The DKR Batman figure released around the same time. It’s a nice piece, and it is surprisingly sturdy. Not really of much use to Selina, but a great add-in if you have the complimentary Batman.

Lastly, Selina includes a display stand with her name on it. It’s a pretty cool stand, designed to vaguely emulate the early teaser posters featuring the character smashing a batarang under her heel on a rainy surface.

THE ME HALF OF THE EQUATION

Selina was ordered from Sideshow’s website pretty much as soon as she was up for pre-order. I knew I wanted the figure as soon as I saw the movie, and I definitely wanted the extra Batman cowl to display with my Batman figure. Overall, the figure isn’t perfect, but it’s a good figure overall, and she really looks great when displayed with Batman and Bane.

#0189: The Demon, Etrigan

Posted by Ethan Wilson in Reviews and tagged with , , , ,

THE DEMON, ETRIGAN

DC UNIVERSE CLASSICS

Ah, yes, DC Universe Classics. A line I loved and hated. I love most of the figures, but I grew to hate Mattel, the producers of the line, more and more as every series went by. This figure goes back to the happier times, way back in Series 1, before things went to crap.

The character in question is The Demon, Etrigan, a character created by Jack Kirby in 1972. He was originally Sir Jason Blood, a knight in King Arthur’s court, who was bound with the demon by Merlin. Jason became immortal, and had the ability to summon the Demon’s form by reciting “Gone, gone the form of man. Rise the demon, Etrigan!” The character had prominent appearances in Batman: The Animated Series and Justice League, if you want to check those out.

THE FIGURE ITSELF

Etrigan was released in the first series of DC Universe Classics. I always have found this to be an interesting choice, given the character’s relative obscurity, but I suppose Mattel wanted to show they intended to go pretty obscure with the line. He has 23 points of articulation is is just shy of 7 inches tall. DCUC was usually heavily dependent on the Buck System, but Etrigan actually had an almost entirely unique sculpt. The only thing I believe was ever reused is the upper torso piece, which I believe was later see on some of the Collect-N-Connect figures such as Atom Smasher. Etrigan’s sculpt is a truly impressive piece of work by Mattel’s oft-used sculpting team The Four Horsemen. The skin has some wonderful texture work, and the sleeves and cape are nicely tattered. Etrigan’s lower arms and hands are a bit rubbery, but nowhere near as bad as some later entries in the line. The paint work on Etrigan looks great. All the basic paintwork is clean, no slop or bleed over. He also features several washes, which really help to bring out the details of the sculpt. Etrigan’s only accessory is the left arm of Metamorpho, the C-N-C of series 1. Etrigan doesn’t really have anything that would work as an accessory, and he’s a bit bigger than the typical figure, so it’s understandable.

THE ME HALF OF THE EQUATION

I had initially not planned on purchasing Etrigan, or really getting into DCUC at all. The line-up was mostly figures I already had in some form or another, and most of Mattel’s previous DC work had been lackluster at best. DC Direct seemed to be killing it with their more expansive offering of DC figures. But then, Mattel announced the next two series of figures. Specifically, they announced Series 3’s Green Lantern, which quickly caught my attention. So, I gave the first series a second look, and found that several of them were actually quite good. I found Etrigan and two of his compatriots at my local Target and picked them up, effectively creating a monster. Yay.

#0177: XLR8

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

XLR8

BEN 10

Ben 10. Now that’s a name I haven’t heard in quite some time…

Ben 10 was one of those shows I was very interested in at first, but started to drift from after a few episodes. I don’t really know why. It wasn’t a bad show, I just started routinely missing it. Nevertheless, I had the action figures, because those alien designs were pretty cool. Today I’ll be looking at the resident speedster: XLR8. Isn’t that a clever name?

THE FIGURE ITSELF

XLR8 was released as part of the second assortment of Bandai’s Ben 10 line. He has 8 (wow a whole 8!) points of articulation and stands roughly 3 ½ inches tall. He’s a Bandai America figure, so he was in the 3 ½ inch Ben 10 line, meaning every single figure in the line was 3 ½ inches tall, regardless of relative height to each other. Oh the joys of Bandai. The 8 points of articulation allow you to put him in a standing pose and…. Yeah that’s about it. There are no other poses. The figure’s sculpt isn’t terrible, but it’s not quite on model to the animation either. Most noticeably, the upper legs look pretty off, almost like kangaroo legs. The tail has been sculpted in a position that looks good with almost no poses, so there’s that I suppose. The figure’s paint work is okay, but there are a few spots with fuzzy paint masks or bleed over. He also had random black spots various places, even when brand new. The figure includes a removable mask, which actually is pretty cool.

THE ME HALF OF THE EQUATION

This figure was acquired using a gift card I got for Christmas one year, I believe. I remember I quite liked XLR8’s design on the show, and IU was very definitely looking forward to the figure. As with almost all Bandai figures I own, I remember liking the figure when I got it, but now I have no idea why. They just aren’t very good toys, truth be told. It’s a shame too, because some of the Ben 10 designs really would make cool toys if handled properly.

#0166: Robin

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ROBIN

BATMAN (MATTEL)

 

This was my April Fool’s Day post for 2014.  The following is a proper review of the figure written March 24, 2017.  If you’d like to read the original post, go here.

The original version of this review was more a joke thing than anything.  Now a days, I’d have written the review both ways, but the figure was quite incomplete at the time.  Since I finally found this guy’s freaking head, I guess I can actually review him now!

THE FIGURE ITSELF

The figure, officially titled “Battle Board Robin,” was released in the first series of Mattel’s 2003 Batman line.  Robin stands about 6 inches tall and has 11 points of articulation.  The main hook of this line at the time was that they’d brought in the Four Horsemen (who had just helped Mattel relaunch Masters of the Universe) to sculpt most of the figures, including the Bat-variants.  There was one exception to this in the first series.  Care to guess who it was?  Yep, it was this here Robin figure, which was handled by Mattel’s in-house team.  In their defense, it’s actually a decent enough sculpt.  It doesn’t look quite as good as the  prototype did, but what figure does?  His muscles are sort of impossible, and I’ve always disliked how stiff he was, bit there are some nice things about the sculpt.  The boots in particular look pretty solid.  But how about that head that I finally found after all these years?  Well, full disclosure: the reason it was missing when I found him was because I had fully intended to replace it with another one.  Unfortunately, I wasn’t particularly good at sculpting at 12, so the replacement I made wasn’t much better.  Ultimately, this one’s okay, but not my favorite Robin head.  I think it’s got a lot to do with the hair, which just doesn’t really look like anything Tim ever sported.  Also, still missing from the figure is his cape.  It was just two pieces of fabric glued together, and was too thick and short to actually hang realistically.  It’s kind of exhibit A of why I prefer capes to be sculpted.  In terms of paint, this figure was fairly basic colors.  For some reason the gloves are black.  Don’t know why, never did.  The accents on the muscles and some of the other sculpted work actually weren’t standard to the figure; I added them around the time that I tried replacing the head.  I really wanted to salvage this figure for some reason.  His only accessory was his titular Battle Board, which was really just a disc launcher than he could also stand on.  It was an odd choice.

THE ME HALF OF THE EQUATION

There’s actually not a particularly exciting figure regarding the acquisition of this figure.  He, Joker, and the basic (Zipline) Batman were all really hard to find when these figures started hitting stores.  I eventually found him at the KB Toys near where my family vacationed (I got him alongside some Star Trek: Nemesis figures.  Oh what a joyous day that was).  He’s not awful, but he’s also not super great.  The saddest thing is that Mattel never actually returned to this design for Robin (apart from an inaccurate repaint of the later DCUC figure), so this is the best there is from them.