Tag Archives: Diamond Select Toys

#0332: Data – First Contact

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DATA

STAR TREK: THE NEXT GENERATION

DataFC1

Star Trek movies have a tendency to be rather hit and miss. The shows all have their loyal fanbases (even Voyager and DS9, much to my own amazement), but the movies tend to be very polarizing. There’s the common adage about the odd movies being the bad ones, which sort of works (well…if you overlook Star Trek VI and Insurrection). Two movies that support this theory are Star Trek II: The Wrath of Khan and Star Trek: First Contact. In the case of the latter, I think the movie is even better than the show that spawned it, and it remains one of my favorite movies to this day. Around the time of Nemesis and Enterprise, Art Asylum picked up the license for Star Trek and began doing figures of the current stuff. When Art Asylum merged with Diamond Select Toys, DST took over the line and changed up the release method a bit, doing just 2-3 characters at a time, with multiple character looks released different places. Today, I’ll be looking at Data, based on his look from First Contact.

THE FIGURE ITSELF

DataFCWilsonData was part of series three of Diamond’s Star Trek: The Next Generation line. This particular variant of Data was released as a Previews Exclusive, meaning he could only be gotten by placing an order for series three through Diamond Distributers. The figures stands about 7 ½ inches tall and features 16 points of articulation. The figure is based on the character’s appearance in First Contact, specifically the final 10-15 minutes of the film, after the human implants given to him by the Borg are destroyed. The figure’s sculpt is a mix of unique and shared pieces. The arms below the shoulder, and everything below the waist are shared with the regular series 3 versions of both Data an Lt. Barclay. The figure gets a new torso and shoulders to represent his movie uniform, as well as an all new head sculpt to represent his “exposed” look. The body is pretty good, though not perfect. The legs are skinny, and the slightly odd positioning of the feet, coupled with the lack of any sort of swivel joints on the legs, makes the figure difficult to stand correctly. The hands also seem a bit on the large side, but they aren’t terrible. The head sculpt bears a passing resemblance to Brent Spiner, but it’s not as close as some previous sculpts. The mechanical part of the head is superb, very accurately recreating all the exposed circuitry seen in the movie. It’s the highlight of the figure, which is good because it’s also the selling point. The paint on Data is clean and well applied. The skin seems just a bit thick, but it’s not too bad on a robotic character like Data. Data includes an alternate head, an alternate arm, a hair piece for the extra head, and a transfer tube of some sort to be plugged into the head. The extra head is mostly unscathed Data, with a removable piece of hair exposing some more of his circuitry, and the extra arm features a rolled up sleeve, exposing even more circuitry. The head is pretty nice, and swaps pretty easily. I can’t tell whether the likeness is improved or made worse by seeing more of his face. The arm is nice, but for the life of me, I have no idea how you’re supposed to swap it out. The regular arm he comes packaged wearing is very definitely not coming off.

DataFC2 DataFC4 DataFC3

THE ME HALF OF THE EQUATION

One of the earliest movie-going experiences I remember is going to see Star Trek: First Contact with my parents. I was four at the time. I think I had seen an episode or two of the series, and I’m pretty sure I had seen Generations. I definitely knew Data was my favorite character. In preparation for the movie, my Dad bought me the Data action figure from the Playmates First Contact line. I clutched that figure tightly through the whole movie. One thing I always lamented was the figure’s lack of extra head for the look from the end, which was long one of my favorite looks. For years, I would make use of silver silly putty or duct tape to customize my own. I was thrilled when Diamond announced their own version of the look, but I never really got a hold of the figure. At local con Shoreleave this summer, one of the dealers had a large table of DST Trek figures, all marked $15. I saw Data under a few other figures, and after some encouraging words from Super Awesome Girlfriend (have I mentioned that she’s really supportive?) I decided to finally get one. It’s not the greatest figure ever, but I really like the look, and it’s a pretty great representation of it!

 

#0323: Herman Munster & Muster Koach

Posted by Ethan Wilson in Reviews and tagged with , , ,

HOT ROD HERMAN WITH MUNSTER KOACH

THE MUNSTERS MINIMATES

HermanMunster1

I must admit, I don’t actually know a whole lot about The Munsters. I understand the basic premise, which is essentially just the reverse of The Adams Family, and I’ve seen an episode or two. I think, if pressed, I could probably name most of the family members. But, other than that, my knowledge is limited. One thing I do know a whole lot about, however, is Minimates. Specifically, how awesome they are! The Musters Minimates weren’t a very expansive line. They were limited to just two separate releases: two variants of Herman Munster and the Munster Koach. Regular Herman and the Koach were released at Toys R Us, while Hot Rod Herman and the Koach were released in various specialty stores. I’ll be looking at the specialty set.

THE FIGURE ITSELF

HermanMunster2Herman is presented here in his “Hot Rod Herman” get-up. Based on what it says on the back of the box, “Hot Rod Herman” is an episode of the show where Herman takes up drag racing. This figure is based on the gear he wore during the episode. Herman is about 2 ½ inches tall and features 14 points of articulation. He makes use of the standard Minimate body, with a new head sculpt in place of the standard one, as well as a pair of extra tall feet, and add-ons for the character’s jacket and neck bolts. The feet and neck bolts were previously used on the Universal Monsters Minimates Frankenstein’s Monster. Given Herman’s similar nature, it’s a sensible re-use. The jacket and head are the new pieces for this figure, and they both look pretty good, and accurately represent the character’s look from the specific episode. Herman’s paintwork is pretty great. Everything is clean and sharp, and they’ve done a nice job translating Herman’s likeness to the ‘mate form. I should also point out that the figure is in Black & White, meaning all the paint is done in shades of gray. This is done very well, and the figure does genuinely look like he’s in Black & White.

THE VEHICLE ITSELF

HermanMunster3The Munster Koach serves as an accessory to Herman in essence, though it does overshadow him a bit in the packaging. The Koach is about 5 inches in length and about 3 ½ inches at its tallest point. It features moving wheels and a hinged roof. The sculpt for the Koach is unique to the Koach itself, though the two versions are identical in sculpt. It’s a good sculpt. There are a fair share of details, but not too many so as to make it stand out from Minimates aesthetically. The detail of the sculpt is truly impressive, right down to the fringing on the interior curtains and the stitching on the seats. The dashboard is even fully detailed, with a clutch, steering wheel, and several buttons. The paintwork marks HermanMunster4the key difference between the two versions of the Koach offered. This one has been done in a Black & White color scheme to match Herman. Obviously, there aren’t as many differing colors on this version, but the paintwork is still nice and clean, and the variance of the grays is really well done.

 

THE ME HALF OF THE EQUATION

I picked up this set from my favorite Minimate retailer, Luke’s Toy Store, along with the Kill Bill sets. Mostly, I picked the set up because it was $4, but I have to admit it is a pretty nifty little set. The Koach is a nicer vehicle than a lot of the others offered in the Minimates line. It is a bit odd to see a Black & White version of a figure there is no color equivalent for, but Hot Rod Herman is a pretty solid Minimate. All in all, a fun set that I would highly recommend.

HermanMunster5

#0316: Kill Bill Crazy 88s Set

Posted by Ethan Wilson in Reviews and tagged with , ,

CRAZY 88s

KILL BILL MINIMATES

Crazy88s1

Even before I had seen the movie, I always thought the Crazy 88s from Quentin Tarantino’s Kill Bill as a pretty cool idea. When Diamond Select Toys announced the Kill Bill license would be coming to Minimates, I was immediately intrigued by the idea of getting some Crazy 88s Minimates. After seeing the movie, I was even more sold on the idea. So, without further ado, let’s see how Diamond’s take on these guys turned out!

THE FIGURES THEMSELVES

The second set of Kill Bill Minimates continues the first set’s House of the Blue Leaves theme, but this time, instead of them main characters, it’s four members of the Crazy 88s. Just like the first set was significant for being made up of all female characters, this set is significant for being made up entirely of army builders, another rarity for Minimates.

JOHNNY MO

Crazy88s2While this is technically a set of all army builders, the first Crazy 88 in the set is actually based on a named character. The character in question in is Johnny Mo, the head of the Crazy 88s. Johnny is 2 ½ inches tall and features 14 points of articulation. The figure is depicted wearing the standard Crazy 88 uniform: black suit and tie and a Kato mask. It’s the only thing we see Johnny wearing, so it’s obviously a sensible choice. He’s built on the standard Minimate body, with the addition of a suit jacket and a tie, seen on numerous previous figures. The suit jacket has one small change; there’s a hole in the back near the bottom, which has been put there to allow Johnny to be placed on the leaping stand.  Johnny’s paint apps aren’t anything amazing, per say, but they are pretty good. The detailing on the face and mask are superb. They’ve chosen to give him a screaming expression. While it might have been nice to get a more reserved expression too, given the choice of only one, this is the one I’d go for. It works really well in an action pose, especially when coupled with the leaping stand. There’s one more painted detail on the figure that’s really easy to miss. On the back of the torso block, there’s a blood splatter. This means you can flip the torso around to depict the 88s from later in the fight. It’s a really cool touch that shows Diamond’s commitment to making these figures as fun as possible.

CRAZY 88 #2

Crazy88s3This is the first of the “generic” 88s in the set. He’s not based on any one in particular, although he does bear a resemblance to one of the 88s present during the “power walk” at the House of the Blue Leaves. Since he doesn’t have a name, and I don’t want to refer to him as #2 for the whole review, let’s just call him Topher. Just like Johnny, Topher stands 2 ½ inches tall and sports 14 points of articulation. He’s built on the standard Minimate body, with the addition of the suit jacket, the tie, and a hair piece. The hairpiece was first seen on the TRU exclusive Harada from The Wolverine and the jacket and tie are the same oft used pieces seen on Johnny. Unlike Johnny, Topher’s jacket hasn’t been altered to allow for the jumping stand. The paint work on Topher is nice and clean. He’s been given a slightly more reserved expression than Johnny, though he does still have a slight grimace, which means he’ll still be right at home in a fight scene. On the back of his torso, he features a blood splatter unique from the one seen on Johnny. This one is a bit more sparse, but still really cool!

CRAZY 88 #3

Crazy88s4Here’s Crazy 88 #3, whom I’ll now be calling Treat. Treat is another generic 88. He’s about 2 ½ inches tall and he has 14 points of articulation. He too is built on the standard Minimate body, as well as the suit and tie seen on the others and a hairpiece stolen from Thunderstrike, who was in Series 42 of Marvel Minimates. Like Topher, his jacket is unaltered, so no crazy jumps for him! The hairpiece is a somewhat unique one, so it brings some character to an otherwise basic figure. Treat’s facial expression is more intense that Topher’s, but not the full yell that’s been given to Johnny. He’s got more of a vicious snarl going, which definitely adds some diversity to the facial expressions on these guys. Like the others, Treat has a blood splatter on the flip side of his torso. His is much more severe looking than the other’s. Looks like Treat’s a goner!

CRAZY 88 #4

Crazy88s5Last up is Crazy 88 #4, henceforth known as Foreman. Foreman is the final generic Crazy 88 in the set. He stands 2 ½ inches tall and has 14 points of articulation. Just like everyone else in the set, he’s built on the standard Minimate body. In addition to the basic body, he’s also got the suit and tie pieces, as well as a poofy hairpiece, courtesy of Egon from the Ghostbusters line. Like Topher and Treat before him, Foreman’s jacket has been left unaltered, so he doesn’t get to do all the fun flips and jumps that Johnny does. He’s very sad about that. I’m not sure about the hair. It works for Egon, but it seems out of place here. Foreman has the most generic expression in the set. It’s just a basic gritted teeth look, which is actually really great to have in the set. He also ends up with the most basic blood splatter of the four. It’s pretty much just a straight streak of blood.

THE EXTRAS!

Crazy88s7This set, by nature of being an army building set, doesn’t come accessories that really correspond to one figure in particular. There are two exceptions: the leaping stand and the bamboo swords are pretty clearly meant to go with Johnny Mo. However if you aren’t displaying as Johnny, that would change. Beyond that, there’s a clear display stand for each of the four figures, two extra heads, two motor cycle helmets, three extra hairpieces, two axes, and four katana. The stands are the same ones we’ve seen before, but I can’t stress how cool it is that we’re getting them with every release now. The heads allow more variety if you’re in the army building mood, offering a female head, which makes use of the same hair as Gogo, and a more calm male head, which has hair from the Peter Parker released in Series 46 of Marvel Minimates. The three hair pieces add even more to the variety of display options, and they are reused from DC Minimates’ Nightwing, Marvel Zombies’ Hulk, and Marvel Minimates Series 27’s Ultimate Captain America. The helmets allow you to recreate the fantastic chase scene, which was set to the always awesome “Flight of the Bumblebee” most commonly remembered as the theme to the 60s Green Hornet. The helmet was originally meant to be part of Marvel Minimates series 15, but as that’s the only series of Marvel Minimates ever to be cancelled, it never saw release. It’s nice to see it finally show up here! The axes and katana are both re-use as well, but it’s very sensible re-use, and it’s great to have several weapon options. If the figures weren’t already great enough, the accessory compliment really adds to the set’s cool factor!

Crazy88s6Crazy88s8Crazy88s9

THE ME HALF OF THE EQUATION

I picked up this set, along with the other Kill Bill set, from my favorite Minimates retailer, Luke’s Toy Store. I was onboard for this set even before I saw the movie, but my excitement definitely increased once I had. Initially, I thought this set might be a little dull, what with it being four figures who are identical from the neck down, and not tremendously different from the neck up. Dull is the last word I would use to describe this set after getting it in hand. This set is a testament to how to build a successful collection of figures using almost no new pieces. The set has so many extra pieces, I’d even say it’s one of those rare sets that almost can’t be appreciated until you have more than one!

Crazy88s10

#0315: Kill Bill House of the Blue Leaves Set

Posted by Ethan Wilson in Reviews and tagged with , , , ,

THE BRIDE, O-REN ISHII, SOFIE FATALE & GOGO YUBARI,

KILL BILL MINIMATES

KillBill1a

My love for Minimates is no secret. They are, without a doubt, one of my favorite toylines. I am such a fan of Minimates that I sometimes buy Minimates from movies I’ve never seen. In some cases, I’ll even go so far as to watch the movie, as a further excuse to buy the Minimates. That’s kind of the case with today’s Minimates, based on Quentin Tarantino’s Kill Bill. Based on the fact that there were going to be Minimates, coupled with a recommendation from a few friends, I finally got around to seeing the movie. And then I HAD to have the Minimates. So, here they are. By nature of some of the pieces and details in the set, this review contains SPOILERS for Kill Bill Vol. 1.

THE FIGURES THEMSELVES

The first set of Kill Bill Minimates is based on the battle at the House of the Blue Leaves, the climactic battle from Kill Bill Vol. 1. The set includes The Bride, O-Ren Ishii, Sofie Fatale, and Gogo Yubari. The cool thing about this set is that it’s entirely made up of female characters, which is a pretty serious rarity for not just Minimates, but toys in general.

THE BRIDE

KillBill1bThe Bride is the main character of Kill Bill, though not the title one. In the first film she just goes by “The Bride” until her name is revealed at the very end, so the Minimate is just “The Bride” as well. The Bride is about 2 ½ inches tall and features 14 points of articulation. She’s based on the character’s yellow jump-suited look during the final battle in Volume 1, which is in turn based on a similar outfit worn by Bruce Lee in The Game of Death. She makes use of the standard Minimate body, with the addition of a brand-new hairpiece. The hairpiece is well sculpted and does a nice job of translating The Bride’s hair from this point in the movie. Most of The Bride’s details are handled via paint apps, which look great. The black detail lines are all nice and cleanly applied, and the Uma Thurman likeness is superb. The Bride is meant to represent her mid-fight with the Crazy 88s, so in addition to the basic jumpsuit details, she also features quite a few blood spatters. The spatters are all really well detailed, and they seem to line up pretty much perfectly with the stains from the movie. The Bride includes her genuine Hattori Hanzo sword and a scabbard to match, as well as a clear display stand.

O-REN ISHII

KillBill1cO-Ren is the first person on the list of people she has to kill before getting to the eponymous Bill (though she’s actually the second person on the list we see The Bride kill. Yay flashbacks!). She serves as the primary antagonist of Volume 1. O-Ren is about 2 ½ inches tall and has 14 points of articulation, though the skirt renders the leg articulation mostly useless. O-Ren is depicted in her white kimono from the final battle at the House of the Blue Leaves. She makes use of the base body as a starting point, with long sleeved lower arms in place of the standard ones, as well as add-ons for her hair and the lower portion of the kimono. The kimono pieces are re-use from Mariko, released in Series 52 of the Marvel Minimates line. They’re basic, but that works pretty well for the desired look. The hair appears to be a brand-new piece, and it accurately represents O-Ren’s look in the movie. O-Ren’s paint apps are nowhere near as complex as those seen on The Bride, but they’re not bad. The kimono details on her torso wrap all the way around, plus she has full detailing on her feet. Her face is the spitting image of Lucy Lui, who portrays O-Ren in the movie. One issue, which I am certain is exclusive to my figure, is that there’s a slight malformation of the hair, which has been painted with a flesh tone, making it extremely obvious. It mars an otherwise great figure, but it’s nothing a quick dab of paint can’t fix [EDIT: an astute reader has pointed out that this spot is more likely meant to be the flower present in O-Ren’s hair in the movie, meaning it’s not a mistake at all!]. O-Ren includes a sword with a scabbard, as well as a clear display stand and an alternate hairpiece, depicting her…final moments.

KillBill1d KillBill1e

SOFIE FATALE

KillBill1fSofie Fatale serves as O-Ren’s right hand woman. She’s also one of three people to make it out of the fight at the House of the Blue Leaves alive, though she certainly doesn’t come out of it unscathed.  She stands roughly 2 ½ inches tall and sports 14 points of articulation, but once again the leg articulation is constricted by the skirt. Sofie is presented here in her gray-blue dress from the fight at the House of the Blue Leaves. It’s not the most interesting look, but it’s in keeping with the rest of the set, so it’s a good choice. She’s built on the usual body, with a basic long skirt add-on, as well as a new hairpiece. At least, I think it’s new. It looks sort of familiar, but I can’t find any previous uses of it. It’s a well sculpted piece, and does a nice job translating Sofie’s tightly tied back hair. Sofie ends up with the least painted details in the set, with only some basic work on her face, the front of her torso and her shoes. Everything seems to be pretty cleanly applied, which is good, but it’s not the most exciting Minimate. Sofie includes a cellphone and a clear display stand. Yep, in a set full of swords, she gets a phone. I do kind of wish we had gotten some sort of wounded arm accessory, just to spice the figure up a little, but oh well.

GOGO YUBARI

KillBill1gGogo is O-Ren’s personal body guard. She also happens to be a Japanese school girl, and is one of the most ruthless characters in Kill Bill. Which seems about right for a teenage girl, if I’m honest (I kid). She stands about 2 ½ inches tall and has 14 points of articulation. Gogo is depicted here in her schoolgirl outfit, which I believe is the only thing she’s ever shown wearing, so there. She makes use of the standard Minimate body, with short skirt and hair add-ons. Both pieces ore re-use. The hair is from the TRU exclusive Gwen Stacy from the first Amazing Spider-Man, and the skirt I believe originated on BSG’s President Roslin. Both pieces work well for Gogo, so it’s a good re-use. Gogo’s paint apps are quite nice. They aren’t quite as clean as those on The Bride and O-Ren, but they aren’t bad, and she has some tremendous detail work on the skirt, which is plaid, and the jacket, which has faint pocket lines. Gogo includes a flail, which I believe is a new piece, a clear display stand, and an extra head with blood running from the eyes to depict her death scene. It’s kinda cool, but also a bit morbid, which seems right for the set.

THE ME HALF OF THE EQUATION

When this set was initially announced, I wasn’t really all that interested. It just seemed a bit boring. However, once I actually sat down and watched the movies, I was immediately eager to get this set. Initially, I just wanted this set for The Bride, but actually having them in hand, I think the whole set is really worth the purchase. This is probably the definitive version of The Bride, plus you get O-Ren, who’s pivotal to the first movie, and Gogo, who’s just kinda cool. Sure, Sofie’s not the most interesting Minimate, but she’s not terrible. Add to that the impressive paint apps on all of the figures and the cool extra pieces, and you’ve really got a winning set!

#0305: Yondu & Sakaar Trooper

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

YONDU & SAKAAR TROOPER

MARVEL MINIMATES

Sakaaran&Yondu1

Guardians of the Galaxy was an awesome movie. Minimates are one of the greatest toylines of all time. These are indisputable facts. Sorry if you disagree, but that’s just how it is. So, the combination of these two things can be nothing if not amazing!

The Guardians of the Galaxy Minimates are a subset of Diamond Select Toys’ flagship Marvel Minimates line. Their just starting to hit stores, starting with the Toys R Us assortment. Today, I’ll be looking at Yondu and the Sakaar Trooper.

THE FIGURES THEMSELVES

Yondu and the Sakaar Trooper are the exclusive set from the TRU assortment of Guardians of the Galaxy Minimates. The Sakaar Trooper will also be packed with Nebula in Marvel Minimates Series 57, making Yondu the only true TRU exclusive.

YONDU

Sakaaran&YonduWilson2Yondu holds the honor of being the only of the original Guardians of the Galaxy to appear in the film. He also ended up being the character that had perhaps the most changes made to him. I guess the world just wasn’t ready for a blue-skined 30th century archer who sports a 2 foot red mohawk and spandex. And that’s a shame. The Minimate is of course based on the film version of the character. The figure is about 2 ½ inches tall and features 14 points of articulation. He uses the standard Minimate body, with all new pieces for Yondu’s “mohawk” and scavenger jacket. Both pieces are well sculpted and look accurate to the source material. Perhaps the details on the jacket could be a bit sharper, but that feels a bit nit-picky. The painted details on Yondu are top-notch. Even with blue skin and red eyes, that’s definitely Michael Rooker’s face. Yondu’s uniform is also quite impressive. There’s tons of folds, straps, pouches and zippers present, which really helps the figure convey the “scavenger” look. The Mohawk piece is red, which isn’t quite right to the movie, where it was a silver piece that glowed red, but I actually prefer the red. Yondu’s only accessory is a clear display stand. It’s a little disappointing that he didn’t get any of his little console doodads, or at the very least his golden arrow, but I suppose the line has to be drawn somewhere.

SAKAAR TROOPER

Sakaaran&YonduWilson1The Sakaar are yet another alien race elevated to movie-dom thanks to Marvel Studios not having the rights to all the top-notch aliens.  They and the Chitari must just laugh it up every time the Skrulls and the Baddoon stop by! The Sakaar Trooper stands 2 ½ inches tall and features 14 points of articulation. The Sakaar Trooper is built on the base Minimate body, with the addition of a newly sculpted helmet. The helmet is a decent piece. It has the look of a rough sculpt, but that’s pretty accurate to the look of the Sakaar from the movie. The rest of the figure’s details are handled via painted details. They’ve done a pretty great job of boiling down the rather complex Sakaar design into a basic set of painted details. Like Groot, the Sakaar Trooper features some rather extensive texture detailing that wraps around many of the surfaces. The Sakaar Trooper includes a blaster and a clear display stand.

THE ME HALF OF THE EQUATION

I purchased this set at the same time as yesterday’s Drax, Groot & Rocket. This being the exclusive set, it was the one I was actually looking for at TRU. Yondu’s a pretty cool ‘mate of a pretty cool character, so I’m glad to have gotten a hold of him. The Sakaar Trooper isn’t the most exciting Minimate, but he could be worse. Maybe he’ll be cooler when I have two of him…

#0304: Drax, Groot & Rocket Raccoon

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DRAX, GROOT & ROCKET RACOON

MARVEL MINIMATES

GrootRocketDrax1

Hey, you know how Guardians of the Galaxy was an awesome movie? Were you aware that, being a Marvel movie, it’s guaranteed to get its own assortment of Minimates? Did you know I love Minimates?

Yes, I love Minimates, and I also loved Guardians of the Galaxy. Put those together, and you’ve got a product I just can’t resist. The Minimates for the movie are just starting to hit, and I’ve already begun to pick them up. Today, we’ll be starting off with Drax, Groot & Rocket Raccoon. Wait a second… three minimates? Not two or four? How is this possible? Read and find out…

THE FIGURES THEMSELVES

Drax, Groot & Rocket are one of the overlap sets from Daimond’s two assortments of Guardians of the Galaxy Minimates. They’re included in both the Toys R Us assortment and Marvel Minimates Series 57, which ships to comicbook stores and specialty shops. My set comes from TRU, as the specialty sets haven’t been released just yet.

DRAX

GrootRocketDrax2Amazingly, this isn’t the first Drax Minimate I’ve reviewed here. Way back in review #0162, I took a look at the classic comic version of the character released in the Infinity Gauntlet set. It’s safe to say that was a fairly different take on the character. This version of Drax is based on the movie version, which is in turn based on the character’s more recent design. Drax is more specifically meant to represent Drax from the middle point of the film, after they escape from the Kyln, but before they get matching uniforms. Drax stands about 2 ½ inches tall and features 14 points of articulation. He’s built on the standard Minimate body, and features 4 sculpted add-ons: a bulked up torso, a waist cover, and a pair of big stompy boots. The torso has previously been used on figures such as the Best-Of version of Venom and the waist piece has been used on more figures than I can count. The waist piece works, as Drax is definitely meant to be a thick guy, but I’m not sure about the chest piece. On its own, it’s alright, but coupled with the really skinny arms, it looks very out of place. As far as I can tell, the big stompy boots are new. They’re well sculpted, so that’s good. Drax’s paint work is good from a technical stand point. Everything is clean and there’s no real slop or bleed over. I do wish that his skin were a brighter green and the tattoos were a bit bolder, just so he wasn’t quite so muddled, but it doesn’t look bad, per say, just a bit drab. I guess he’s a Drab Drax… heh heh. Drax comes armed with twin knives and a clear display stand.

GROOT & ROCKET RACCOON

GrootRocketDrax3If there’s one thing everyone can agree on about Guardians of the Galaxy, it’s that these two stole the whole movie. I think Groot in particular surprised a lot of audiences. So, you’re probably thinking “Why are you reviewing both Groot and Rocket at the same time?” Quite simply, it’s because only one of them’s a Minimate. I’ll start with Groot, because he’s actually the figure here. Groot is a little over 2 ½ inches tall and has 14 pointes of articulation. Like Drax, he uses the basic Minimate body, with unique pieces for his head, hands, and feet, as well as a torso extender add-on that’s seen use a few times. The new pieces are all pretty great. My only complaint is that the head has two tabs on the back to allow for Rocket to be propped on Groot’s shoulder. It’s an okay idea in theory, but it’s difficult to get Rocket to stay in place, and it leaves Groot with two rather noticeable tabs sticking out of his head. The paintwork on Groot is really great, and superbly detailed. His bark detailing even continues around the sides of his torso, which is certainly impressive. Groot comes with a clear display stand and Rocket. Rocket is about 1 ½ inches tall and is unarticulated. He has been sculpted to appear as though he has the same 14 points as the typical Minimate. He is sculpted holding a gun in one hand, with his arm outstretched. He’s well sculpted, and his paint isn’t too sloppy. It’d be nice if he could move, but I guess it’s good to have him at least.

THE ME HALF OF THE EQUATION

These three were purchased at a TRU not too far from the hotel I was staying at for a local convention. They capped off a pretty awesome night hanging with a few of my friends and Super Awesome Girlfriend. On our drive to dinner, my buddy Tim and I saw the TRU and insisted on going in. I found this set, as well as the exclusive Yondu & Sakaar Trooper and Star Lord & Ronan. I left Star Lord & Ronan there, as it’s a shared set, but I gave in to my impatience on these three. I just had to have Rocket and Groot! All three figures in this set are pretty impressive, even if there are a few small issues. I can’t wait to see how the rest of the main Guardians turn out!

#0263: Wolverine – Brown Costume, Woverine – Brood-Infected, & the Brood

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WOLVERINE – BROWN COSTUME, WOLVERINE – BROOD-INFECTED, & THE BROOD

MARVEL MINIMATES

Wolverine&BroodBroodverine&Brood

Okay, it’s time for another review from the wonderful world of Minimates! Once again, the figures in today’s review hail from the flagship Marvel Minimates line, which is a pretty huge line of figures. This time around, it’s two versions of Wolverine and the alien race the Brood from the X-Men side of things. Let’s have a look!

THE FIGURES THEMSELVES

Wolverine, the Brood, and Brood-infected Wolverine were released as part of Marvel Minimates Series 47, which was based around the “Outback” era of the X-Men comics during the 80s. Basic Wolverine was the basic release, with the Brood-Infected Wolverine as the one-per-case variant. One Brood was packed with each of the Wolverines.

WOLVERINE

This was this series’ normal Wolverine. He’s based on Wolverine’s brown costume, which he quite prominently wore for most of the 80s and a short period of the 90s. The figure is built on the standard Minimate body, so he stands about 2 ½ inches tall and features 14 points of articulation. The figure features a sculpted mask, belt, boots, and hands. All of these pieces have been used on previous figures, but given the similarities between this and other Wolverine looks, this is a completely understandable practice. Generally, they are the best available Wolverine pieces, so that works out well. The paint work on Wolverine is okay, but not the greatest. There are a few sloppy lines here and there, and my figure was missing the upper part of his left glove entirely. Obviously, the last one was an isolated incident, but it speaks poorly for the general quality control of this series. Wolverine includes a spare hair piece and a pulled down mask to hang on his shoulders. Both are new, which is impressive for a figure that is otherwise re-use.

WOLVERINE – BROOD INFECTED

The Brood infected wolverine is a tweak on the basic Wolverine in the series. He is meant to depict Wolverine in the midst of being transformed into one of the Brood. He’s in the brown costume, like the normal Wolverine, but this time around it’s a lot more greyed out, to match his different skin tone. Like the regular Wolverine, this one is built on the standard Minimate body and features a sculpted mask, belt, boots, and hands. The belt and hands are the same as those seen on the regular figure, but the mask and boots are different and in fact are brand new to this particular figure. Both pieces represent slightly more exaggerated proportions than the regular versions, which lend themselves more to the Brood-transformation. The paint work is okay, but not great. There aren’t any outstanding issues like with the normal version, but he still suffers from some fuzzy lines, and a few misplaced details. This Wolverine includes a pair of Brood tentacles, which can be put on in place of his normal hands.

THE BROOD

The Brood are one of the more prominent alien races to grace the pages of X-Men. They have quite a few similarities to the Xenomorphs of the Alien franchise, though, interestingly enough, I’m not a huge fan of them. This is meant to be a basic Brood drone, which is the most common design choice, and the one that is best to army build. The figure is sort of based on the base Minimate body, but he does not make use of anything below the waist. The figure makes use of several unique sculpted bits, and sits horizontal, so it measures a little under 2 inches in height and about 3 inches long, with 20 points of articulation, thanks to his six arms. The figure features a sculpted head, torso cover with ball joints for two extra arms on either side, a tendril on each arm, and a tail that plugs into the bottom of his torso. All of these pieces are new to the Brood, though the tendrils are shared with the infected Wolverine. They all work pretty well, though the head is more like a hat piece to the normal head, which makes it look odd when viewed from bellow. The paint work on the figure is mostly just the basic green-brown, with a few details on the head and tail. Everything is pretty clean, though there are a few instances of slop. The Brood includes no accessories.

THE ME HALF OF THE EQUATION

As with many other Marvel Minimates sets, these two were purchased, along with the rest of their series, from my local comicbook store on the day of release. I was excited for the series overall, but these two sets were probably my least favorite. Initially, I hadn’t even intended to pick up the Brood-Infected Wolverine set at all, but when I saw them at the store, I figured they looked cool enough. I’m still not the biggest fan of the Brood, and that figure in particular pushes the use of the base body almost to its breaking point, but I can’t think of another way to translate the design. These sets gave us a pretty great version of Wolverine’s brown costume, a neat Brood-Infected version, and a decent Brood figure for those who are fans. All in all, I’d say these sets are a pretty decent win for the line.

#0262: Winter Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , ,

WINTER SOLDIER

MARVEL SELECT

WintersoldierSelect

On the Fourth of July, I took a look at Diamond Select Toys’ Marvel Select line’s version of Captain America. I wouldn’t want Cap to be lonely, so how about giving him a buddy. And who better than Cap’s bestest friend ever, Bucky Barnes! Okay, actually it’s Winter Soldier, but they’re actually the same person (umm….spoilers?). Anyway, Marvel Select just got a comic version of Winter Soldier, released to tie-in with this summer’s Captain America: The Winter Soldier. Let’s see how the figure turned out!

THE FIGURE ITSELF

Winter Soldier is a Disney Store exclusive from the Marvel Select line, released in early 2014. The figure stands about 7 inches tall and features 29 points of articulation. I believe he’s meant to be based on the Soldier’s most recent look, which is an amalgam of his original comic look and his look in Captain America: The Winter Soldier. The figure features an all-new sculpt, and a pretty good one at that. Right off the bat, it’s a more consistent sculpt than a lot of previous Select figures, like Captain America for example. It’s not a perfect sculpt; the chin is perhaps a bit too large, and the arms are a little gangly. Other than that, it’s a great piece of work. The Soldier’s costume allows for lots of textures in the different types of material used in the uniform, and the sculpt handles them all very nicely. The move to a new style of hip joint is probably the greatest thing about the figure, especially looking at the direction of the line as a whole. The new joint is similar to those seen on a DC Universe Classics figure, and it allows for a better range of movement without interrupting the sculpt. I do wish the range of motion was a little bit better on the ankles, but they aren’t terrible. The paint work is pretty decent. There’s no real occurrence of slop or bleed over, and there’s a lot of nice texture work that really accents the sculpt well. Winter Soldier features a nice assortment of accessories, which include a sniper rifle, a handgun, a submachine gun with a strap, a crate with Russian markings, and a stand made to look like a section of wall and floor. The crate in particular is quite impressive, just due to the impressive amount of details present on almost every side.

WinterSoldierSelect2WinterSoldierSelect3WinterSoldierCrate

THE ME HALF OF THE EQUATION

I picked up Winter Soldier from the Disney Store at the local mall. I was there to take care of a few other things and my friend Tim wanted to stop in the Disney Store to look at the new Guardians of the Galaxy Nerf stuff, which he had spied through the window. While he was looking at those, I happened across the store’s Marvel Select display. I had seen pictures of this guy online, but hadn’t thought much about it. I’m at best a moderate fan of Winter Soldier. Before this year I didn’t even own a single figure of him. But, seeing the figure in person was enough to sway me. I’m definitely glad I decided to get him; he’s probably one of the best figures the Marvel Select line has to offer, and he’s just a pretty great toy in general!

WinterSoldierSelectComparison

#0261: Iron Patriot & Extremis Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

IRON PATRIOT & EXTREMIS SOLDIER

MARVEL MINIMATES

Extremis&Patriot

Minimates represent a large portion of my large collection of action figures, and Marvel Minimates are the backbone of the Minimates brand, so it’s no surprise that Marvel Minimates have a high frequency of review on this site. Add in the fact that the reviews are a little bit easier to write, and also tend to garner a decent sized number of page views, and you’ve got a winning combination.  So, today, I’ll once again being going back to the Minimates well, this time to review Iron Man 3’s Iron Patriot & Extremis Soldier. Let’s jump on in!

THE FIGURES THEMSELVES

Iron Patriot and the Extremis Soldier were released in Marvel Minimates Series 49. The series was a tie-in to Iron Man 3, so it depicted characters from the movie. The set was also released in slightly different packaging in the Toys R Us exclusive Iron Man 3 assortment, making it the easiest to acquire of the movie sets.

IRON PATRIOT

Iron Patriot is the newer, friendlier name for Colonel James Rhodes’s War Machine armor. He’s a pretty pivotal character in the movie, so his inclusion here is a no-brainer. He’s built on the standard Minimate frame, which meads he features 14 points of articulation and stands about 2 ½ inches tall. The figure features ten sculpted additions: helmet, chest plate, shoulders, hands, waist, boots, and shoulder cannon. All of these pieces are new to this figure, although they were shared with his Series-mate the War Machine 2.0. It’s a sensible set of parts to share, given that they’re actually the same armor with a different paint job. The sculpt is pretty decent, though all the add-ons do end up making him look just the slightest bit pudgy. The paint work is pretty good overall, but it’s not as great as other Minimate releases. The detail lines are all nice and clean, but the basic color layout is a bit sloppy, especially in the transitions between silver and the other colors. Underneath of the helmet is a fully detailed Rhodes face, which has a pretty decent Don Cheadle likeness and has nice and clean paint apps. Iron Patriot’s sole accessory is a basic clear display stand, but given the large amount of parts that went into his armor, that’s more than acceptable.

EXTREMIS SOLDIER

The Extremis Soldier doesn’t refer to a single character in Iron Man 3, but rather a whole subset of characters who were suped up on Extremis and working for the big bad. They were key to the final battle of the movie, and Diamond has created a hodge-podge of looks to simulate the soldier in a generic way that allows a collector to have a few in a group. The figure is built on the standard frame, just like Iron Patriot, so he has the same height and articulation. The Extremis soldier incudes a sculpted hairpiece, vest, and holster. All three of these pieces are re-use. The hair originally appeared on Series 24’s Shocker, the holster comes from Series 27’s Nick Fury, and the vest comes from the first version of Trench Mauser from the Expendables line. The pieces offer a pretty good approximation of the kind of stuff the soldiers wore. The paintwork on the Extremis soldier is quite good, better than Iron Patriot for sure. All of the line work is nice and clean, and the Extremis details present on the face, torso, and shoulders looks great. The Extremis Soldier includes a pistol, which we’ve seen a few times before, and a spare blonde hairpiece, originally seen on Series 35’s Happy Hogan, which allows for an alternate look.

THE ME HALF OF THE EQUATION

Like most of my Minimates purchases, I picked up Iron Patriot and the Extremis Soldier as soon as they were available, which would have been a week or two after the release of Iron Man 3. Although the paint is a little bit sloppy on Patriot, he’s a nice bold design that really stands out on the shelf, and he’s got some really great sculpted pieces. Add in a pretty sweet looking Extremis Soldier who has several potential looks, and you’ve got a set that’s pretty much a winner!

Extremis&PatriotAlt

#0256: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , ,

CAPTAIN AMERICA

MARVEL SELECT

CaptainAmerica

Happy Fourth of July everybody! For most of my non-American readers it’s just a day in July, but for those of us in the US, it’s a day in July where we grill stuff and then watch stuff explode! Oh, and something about independence or some such. I think they might have mentioned it once in school, but I wasn’t paying attention.

Anyway, what better way is there to celebrate an American holiday than with the Sentinel of Liberty himself, Captain America!

THE FIGURE ITSELF

Cap was released as one of the first Marvel Select figures offered through the Disney Store, following Disney’s purchase of Marvel. He was released along with an assortment of other Avengers figures, some being re-releases of earlier figures and some being all new. To date, I believe Cap is the only of the figures in that group not to see a release elsewhere, though there’s still time. Cap stands about 7 inches tall and features 25 points of articulation. The figure features a brand new sculpt, which is of…varying quality. For the most part, it’s good. It’s based on artist John Cassidy’s depiction of the character, which is a great starting point. The upper body is all good, with great scale details on his upper torso, and some wonderful detail work in the folds on his sleeves and gloves. The head isn’t perfect, but it’s actually pretty good. Aside from the eyes being a little bit too big, it looks great. The biggest issue with the sculpt is the legs, or more importantly, the hip joints. I’m not sure what they were going for, but they sit too low, and distract from the flow of the sculpt without offering much in the way of articulation. I essence, it’s a total fail. It’s especially disappointing given the great sculpted work and range of articulation elsewhere on the figure. It’s almost like they ran out of time and had to rush to finish. For the most part, the paint work is in line with the better parts of the sculpt. Aside from some slightly off paint on his eyes, the paint looks really great. They’ve even added some nice texturing to bring out all of the sculpt’s little details. Cap includes his mighty shield and a stand based on Cassidy’s cover to Captain America Volume 4 Issue 6, which is a nice touch. My only issue is the way the shield connects to Cap’s arm, which is haphazard at best.

THE ME HALF OF THE EQUATION

After getting bitten pretty seriously by the Marvel Select bug with the Disney Store Exclusive Hawkeye and Black Widow, I came across Captain America at my local Disney Store. He was marked down a few dollars and he looked like a pretty decent version of Cap, so I decided I might as well get him. As fate would have it, he was even more marked down than I thought, so I got him for quite a deal. All in all, he’s probably one of the better basic Captain America figures to see release in the last few years, even with a few minor issues.

CaptainAmericaAlt