Tag Archives: Hasbro

#0812: Poe Dameron

Posted by Ethan Wilson in Reviews and tagged with , , , ,

POE DAMERON

STAR WARS: THE BLACK SERIES

PoePilot1

For day 11 of the Post-Christmas gift reviews, I’ll be taking one more venture into the far, far away galaxy of Star Wars. I really, really enjoyed The Force Awakens. More so than most movies I can remember, at least of those released in the last few years. I really can’t think of anything from the movie that I really disliked. Back before the film was released, when I was reviewing a bunch of figures I knew absolutely nothing about, I was somewhat intrigued by Poe Dameron, despite having next to nothing to go on as far as what the character would be like. Upon seeing the film, Poe quickly became my favorite of the new characters. All of the sudden, the two action figures I had just didn’t seem like enough. As luck would have it, I didn’t have to suffer through only having the two figures for very long, as Christmas brought me both the smaller scale Poe’s X-Wing Fighter set and the other of the two 6-inch scale Poes, which I’ll be reviewing today.

THE FIGURE ITSELF

PoePilot2Poe was released as part of the second series of the Force Awakens-branded Star Wars: The Black Series figures. He’s figure #07, which makes him numerically the second figure in this series, after Captain Phasma. The figure stands about 6 inches tall and has 25 points of articulation. The articulation is mostly pretty good, but the lack of back and forth movement on the wrists is more than a little frustrating. The last Black Series Poe I looked at was based on his jacketed look from towards the beginning of the movie, whereas this figure is based on his pilot look from the film’s second half. He’s a mostly unique sculpt, though I have seen the head before, by nature of getting the two-pack version of the character first. It is because of owning that figure that I can correctly diagnose that it is not the sculpt of the figure’s head that is to blame for it looking as hideous as it does. There is in fact a halfway decent Oscar Isaac sculpt hiding under the paint. The rest of the sculpt is pretty good, with lots of great texture work on the jumpsuit, especially the ribbing on the sides of the arms, and there’s also some very nice work on the layering of the PoePilot3various pieces of his outfit. The build of the figure feels perhaps a bit on the stocky side for Poe, but the flightsuit was somewhat bulky in the film, so it isn’t far off. When discussing the paint, one can’t exactly ignore the elephant in the room that is his head. I have no clue what happened here, but man is that face paint horrid. It’s proof positive that it doesn’t matter how good the sculpt is, a lousy paint job will kill it every time. Seriously, did Hasbro hand out pictures of Peter Falk as Columbo instead of Oscar Isaac as Poe? Because, when I see this guy, I expect him to say “oh, and there’s just one more thing…” and then solve a murder. The rest of the paint is actually quite good, with a number of washes to help bring out some of the sculpt’s finer details. Poe is packed with his helmet, a blaster pistol, and a spare set of ungloved hands. The extra hands are interesting, because they give the figure an extra four points of articulation, making the missing movement from the gloves all the more curious.

THE ME HALF OF THE EQUATION

Poe was another gift from my parents. He’s actually a figure I’d seen once or twice before the movie’s release, only to pass on him, due to the face paint. After seeing the movie, and discovering just how awesome Poe is, I realized that was a mistake, so I was very happy to unwrap this figure on Christmas morning. No excuses can be made for that head, but, on the plus side, it can easily be swapped with the two-pack version with relative ease, making a decent figure downright amazing.

PoePilot4

#0809: First Order Special Forces TIE Fighter

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

FIRST ORDER SPECIAL FORCES TIE FIGHTER (w/ FIRST ORDER TIE FIGHTER PILOT)

STAR WARS: THE FORCE AWAKENS

TIEFighterFO1

It’s day 8 of the Post-Christmas gift reviews. I’ll be continuing off of yesterday’s Star Wars: The Force Awakens-themed review, by taking a look at another of the franchise’s thrilling space ships. I can’t very well let the Resistance have all the fun, so let’s have a look at the First Order’s own TIE Fighter.

THE FIGURE ITSELF

TIEFighterFO2Since their inception, the TIE fighters have had their own specific branch of Troopers assigned to them, unsurprisingly titled “TIE Fighter Pilots.” Who could have seen that one coming? Pretty much everybody, that’s who. The TIE Pilot is a little on the short side (a common trait for TIE Pilot figures) coming in at a little under 3 ¾ inches tall.  He’s got the standard 5 points of articulation as well, in case you were wondering. The TIE Fighter Pilot appears to have an all-new sculpt, or at least a heavily tweaked version of the single-carded figure’s body sculpt. The TIE Fighter Pilot’s design hasn’t changed drastically since the Original Trilogy, but they appear to be a bit more armored and overall more streamlined than their predecessors. The sculpt is pretty decent overall, with lots of nice small detail work. The figure sports a removable helmet, which is a little bit on the bulky side and is a little soft on details, but is otherwise a pretty well executed piece. Underneath the helmet is a somewhat generic head, which works. Mine has this weird formation running down his forehead, but looking at pictures of other figures online, this appears to just be a malformation of the sculpt. So, I guess my TIE Fighter Pilot’s just got an awesome face scar that no one else’s has! Paint on the TIE Pilot is rather minimal. He’s mostly just molded in black, but he does have a few extra details here and there, such as the First Order insignia on his shoulders. His face also has a bit of paintwork, which actually looks a bit better than some of the other figures in the line. In addition to the removable helmet, the Tie Fighter Pilot also includes a small blaster pistol.

THE VEHICLE ITSELF

TIEFighterFO4The main focus here, is, of course, the First Order Special Forces TIE Fighter. Which is quite a long name, isn’t it? Like Poe’s X-Wing, the TIE Fighter requires a bit of assembly when removed from the box. The lower cannons need to be popped into place (which is just the slightest bit unnerving), as do the wings. Once put together, the TIE Fighter stands 11 ½ inches tall, 10 inches wide, and is 9 inches deep. It has an opening cockpit hatch, as well as a rotating cannon on the bottom. Over the course of the Original Trilogy, the design of the TIE Fighter slowly evolved. By the time of The Force Awakens, it has gone back to something not too far removed from the design in A New Hope. According to J.J. Abrams, there was originally a far more advanced TIE Fighter design, but it was ultimately decided to go with a slightly more retro look, to make the connection between the two more clear. The sculpt of the TIE Fighter is actually quite impressive, especially when compared to the X-Wing. It’s still a little under-scaled for the 3 ¾ inch figures, but the generally larger size of the cockpit means that getting the pilot in place is a fair bit easier here than it was with the X-Wing. Of course, the TIE Fighter in the film was built for two. This fighter has two seats, but they aren’t quite oriented like they are in the film, in part due to the size of the fighter and also due to the slightly limited articulation of the figures. Getting two figures in place is definitely tricky; Stormtroopers are too large to fit, so you’ll need to actually have one of the single carded TIE Pilots to make it work. The sculpted details on this are quite nicely handled. They’re still a bit simplified compared to the actual movie design, but all the important details are there and the ship as a whole looks pretty sharp. Also, small bonus: the top of the hatch has a spot to stow the pilot’s blaster, which is pretty cool.  The TIE Fighter is, fortunately, not plagued by as many construction issues as the X-Wing, but you will want to keep an eye on the wings. One of mine is TIEFighterFO3just the slightest bit warped. It’s really not noticeable unless you’re looking for it, but it’s annoying nonetheless. Like Poe’s X-Wing, paint is a key piece in why this is a “special forces” TIE Fighter. It’s denoted by the red stripe, on the fighter’s left side. The red is pretty consistent, though there are a few missed spots at some of the connecting points. The rest of the ship is more or less molded in the proper varieties of grey, so very little paint is used. I like this, because it makes for a sharper overall design. The TIE Fighter has two spring loaded feature. The first is a missile launching feature, activated by a button at the bottom, just below the cannon. The two missiles at the front launch, though the mechanism doesn’t appear to be as strong as the one on the X-Wing. The second feature is the wing-launching feature, which replicates what happens to the TIE Fighters when they’re shot in a space battle. There’s a button at the base of each wing, which pops them off. It’s a fair feature, but it does mean the wings will occasionally just pop off on their own.

THE ME HALF OF THE EQUATION

The TIE Fighter was another Christmas gift from my parents, just like the X-Wing. I really like this one a lot, and it’s better put together than the X-Wing. Of course, it’s not the X-Wing, which is a slight strike against it, but it is still fun. And when I opened this one, my brother may or may not have picked it up and chased me around the house while I played with my X-Wing.

TIEFighterFO5

#0808: Poe’s X-Wing Fighter

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

POE’S X-WING FIGHTER (w/ POE DAMERON)

STAR WARS: THE FORCE AWAKENS

PoeXwing1

For day 7 of the Post-Christmas gift reviews, I’ll be venturing back into that galaxy far, far away. However, this time I’ll actually be looking at something from the new movie.

Back when Kenner had just gotten the Star Wars license, and they were deciding on scale, George Lucas was adamant that the figures be small enough that in-scale ships were still a possibility, which led to the decision to use the 3 ¾ inch scale, and ultimately had an undying impact on the action figure industry as a whole. See, the ships were a key piece of the story, since you can’t very have those titular “Star Wars” without them. One of the more distinctive ships was the X-Wing fighter, the main ship of all our favorite Rebel pilots. The X-Wings have made a triumphant return in The Force Awakens, and a triumphant return to the toy aisles with today’s focus, Poe’s X-Wing Fighter.

THE FIGURE ITSELF

PoeXwing2Seeing as the name of this set is “Poe’s X-Wing Fighter,” it’s not really a huge shock that the included pilot is Poe Dameron. The figure is 3 ¾ inches tall and has the same 5 points of articulation as all the other 3 ¾ inch Force Awakens figures. Poe’s body looks to be the same one that was used on the single release Poe, though I don’t actually have one to compare. It’s a decent enough sculpt. The jumpsuit has a reasonable amount of texturing and there’s some nice layering to the sculpt. The vest seems a little soft in some areas, but not terribly so. The head sculpt is shared with the “Armor Up” version of the character. I liked it well enough when I reviewed that figure, and I like it well enough here. It’s not a perfect match for Oscar Isaac, but it isn’t terrible either. At the very least, it’s got a slightly better paint job (though the skin tone is definitely too pale). The rest of the paint is passable, but nothing tremendous. There’s a fair bit of bleed over in several areas, and the edges of the vest are fairly fuzzy. Poe includes a helmet and a small blaster. The helmet is actually really cool, if perhaps slightly oversized, and the gun looks to be the same piece included with Goss Toowers.

THE VEHICLE ITSELF

Let’s be honest here, nobody was really buying this set for the figure, were they? No, the selling point is the awesome X-Wing fighter he’s meant to fly! Out of the box, there’s a tiny bit of required assembly. The cannons and the nose of the fighter are packed separately from the main vehicle, so they have to be attached, and there are also a few small decals to be placed inside the cockpit. Once assembled, the main body of the vehicle is 15 ½ inches  in length and it has a 13 inch wingspan. The X-Wing has 2 points of “articulation” for the cockpit and the landing gear. The cockpit could stand to open just a bit more, but other than that, the basic movement is pretty smooth. The X-Wing fighters in The Force Awakens got an all-new design (officially dubbed the T-70), inspired by Ralph McQuarrie’s original concept drawings from the first movie. It’s a slightly more svelte, less cobbled together look than the prior T-65. The toy gets a new sculpt designed to replicate the design from the film. Some changes have definitely been made for the sake of a slightly easier to produce toy. Chief among them is the decision to scale the whole thing down just a bit. It’s really not that evident, except for poor Poe having to do some serious slouching to fit in the cockpit with the top shut. In addition, some of the more intricate details of the craft have been made less intricate, which gives the whole thing a slightly more simplified look. Given that this ship is designed to go with the 5 POA 3 ¾ inch figures, these changes are reasonable, and make it so the ship fits in with the rest of those offerings.

PoeXwing3

The ship has a non-removable BB-8 built in, much like the R2-D2s built into the X-Wing toys of old. I was happy to see he got a fully detailed sculpt, which matches up pretty well to the single release figure. The construction of the X-Wing isn’t without its issues, though. The most glaring ones are pretty much all related to the parts that were separate in the box. The first, and by far the most minor issue for me, is the softer rubber material used for the nose. This is clearly a safety standards thing, so I can understand why it was done. It really doesn’t look that bad, and my only real concern is how it will hold up over time. The big issue is the level of warping present on the wing cannons. They come like that out of the box, and look a bit on the silly side. Fortunately, there are a few fixes that can be applied, or, if you don’t want to fix them yourself, you can just shoot Hasbro an email and they’ll send you a replacement set for free. Other than that, all the other nits are fairly minor. There are a few exposed screws, but they’re all in fairly out of the way places. The general construction of this ship really isn’t horrible. Paint is something of a key piece on this one, since it’s the color scheme that denotes the fighter as Poe’s. The grey/orange scheme is pretty striking here, and it works nicely with the mold. The actual paint is fairly basic, with just solid color work. There are some areas with some slightly uneven coverage, but the overall look is quite good. BB-8’s head gets some nice work, but his body is left completely unpainted, which is just a tad jarring. The X-Wing has two action features. The main one is the wing feature. When BB-8 is pressed, the wings pop open into the signature X formation. When the button behind him is pushed, they go back to their normal positioning. The mechanism isn’t particularly strong, so the wings won’t stay open if you set the ship down, which is a tiny bit of a letdown (and it also made taking pictures rather hard). The other feature is a more simple missile launching one. Pressing a button on the underside of the fighter launches the included missile. It’s actually surprisingly powerful, so try not to shoot your eye out.

THE ME HALF OF THE EQUATION

Poe’s X-Wing Fighter was another Christmas gift from my incredibly supportive parents. It’s not a perfect item. I can make a list of the issues, I can say it’s a step back after the more advanced X-Wings we’ve gotten in the past. It’s under-sized, and the cannons are warped, and maybe the paint could be better. But when I opened this thing up and put it together? Pure joy. I think it might just be my favorite item I received for Christmas. Seriously, I was so excited that I may or may not have run through the house with it making flying sounds…

PoeXwing4

#0806: IG-88

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

IG-88

STAR WARS: THE BLACK SERIES

IG88a

It’s day 5 of the Post-Christmas gift reviews, and today I’ll be looking at the first example of one of the themes to my gifts this year: Star Wars.  I can’t possibly imagine why that was the case.  It’s not like there was a new movie or something.  Of course, today’s figure isn’t from The Force Awakens, he’s actually from the original trilogy.

Empire Strikes Back is a lot of people’s favorite Star Wars movie (Not mine, but that’s a whole other thing).  There are a number of reasons for that, but one of the most prevalent, especially from a toy-buying perspective, is the bounty hunters.  Moving past the disproportionately popular Boba Fett, the film introduced five rather unique bounty hunters, all of whom do little more than fill the background of a scene on a Star Destroyer.  Still, those unique looks certainly made them all pretty memorable, and it also made them pretty good choices for action figures.  One of my personal favorites has always been IG-88, who is the focus of today’s review.

THE FIGURE ITSELF

IG88bIG-88 is a part of Series 9 of Hasbro’s Star Wars: The Black Series line, released alongside Leia as Boushh and Clone Commander Cody.  He was one of the last figures to hit before the switch-over to Force Awakens-branded product.  IG-88 is numbered 15, which places him right before Leia numerically.  The figure stands just shy of 7 inches tall and has 21 points of articulation, which is pretty darn impressive for a character of his build.  There are certainly some parts that might benefit from improved movement (seriously, those cut-joint hips are killing me), but he’s overall a lot more mobile than I would have expected.  IG-88’s sculpt is seriously top notch.  It’s pretty much a pitch-perfect recreation of the design from Empire, right down to all the little tacked on bits.  Perhaps the only inaccuracy is the head, which is generally a bit sharper, and has a few more molded lines than the real thing.  However, the end result looks a bit better, so I can’t really complain on that one.  His elbows both have a rubber covering to mask the joints.  It looks cool, and it retains mobility, but I do have to wonder how long those pieces will last.  His bandolier is a separate piece, affixed via a small peg on the figure’s shoulder.  It sits nicely, ans allows for stowage of one of his guns and his bladed item.  The paintwork on this figure is probably the best I’ve seen on a Black Series figure in some time. To be fair, this does seem like a hard paintjob to screw up, but this is Hasbro we’re talking about here.   He actually goes beyond the simple gun metal grey we’ve seen on prior IG-88s and some brasses and browns, to give him that nice old and worn look.  IG-88 is packed with two blaster rifles, one long and one short, which can be attached to his hands through use of the small pegs on his forearms.  He also has a blade/axe thing, which can be placed in its spot on the bandolier.  All of the extras are very nicely sculpted and wonderful additions to the figure.

THE ME HALF OF THE EQUATION

While I was fortunate enough to stumble across his series-mate Leia at an out of the way Walgreens, I had no such luck finding IG-88.  Fortunately, my parents seemed to fair a little better, as he was amongst the gifts I received on Christmas morning.  He’s a pretty stellar figure, from start to finish.  The sculpt and the paint really work together on this guy, and he ends up being one of the best figures to date that The Black Series has spawned.

IG88c

#0799: First Order General Hux

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FIRST ORDER GENERAL HUX

STAR WARS: THE FORCE AWAKENS

Hux1

Man, that new Star Wars movie sure was a good movie. Like, really good. To be fair, large elements of the film’s plot and certain characters were somewhat recycled from the original trilogy, but I really didn’t care.  What I do care about are the toys! And hey, now I get to actually write a Force Awakens review with actual, real knowledge of the characters! What a novel concept!

I noted in my full review of the movie that Domhnall Gleeson, who portrays General Hux, was the only new addition to the cast with whom I was already familiar. I was actually kind of pumped that he was in the film, and I really enjoyed his performance and the character of Hux in general. He makes for a good bad guy. But, does he make for a good action figure? Let’s find out!

THE FIGURE ITSELF

Hux2General Hux is part of Hasbro’s smaller scale Star Wars: The Force Awakens line of figures. He comes from the “Space” subset of the line, which makes sense (well, more sense than some of the other subsets). The figure stands 3 ¾ inches tall and he has 5 points of articulation. Standard stuff for the line. Hux’s sculpt appears to be unique to him. He’s presented in his fully dressed up uniform, with his hat and overcoat. He’s only seen a few times with the full get-up, but it’s striking, so I can understand why Hasbro went for it. I suppose that in theory we might see this sculpt reused for some of the other First Order officers, at least if the line runs that far. The overall look of Hux’s sculpt is decent enough, but I have one major issue with it. For other jacketed characters, such as Finn and Poe, there is a basic body with the underlying shirt and then an overlay piece for the coat. For Hux, however, the coat is just sculpted strait onto the body. It’s not really an issue on the torso, but it looks rather ridiculous when it has to break for the leg articulation. An add-on piece would have been much preferred here, and I really don’t know why Hasbro opted not to go for it, apart from a desire to cut costs. In addition, the bulk of this figure’s sculpt is a lot more simplistic than the other figures in the line. The coat and uniform are mostly devoid of any sort of texturing or any real small detail work, which only makes the cuts for the joints even more jarring. At the very least, the figure’s face looks like Gleeson, which is perhaps the one truly nice piece of the sculpt. Adding to the rather simple sculpt, Hux’s paint isn’t the most exciting thing. I guess it’s nice that the shirt and coat are different shades. And, the basic application isn’t bad. He’s just a bit drab. For accessories, Hux includes a small pistol, as well as a piece to yet another build-a-thing. I actually kind of like this build-a-thing piece, though, because it can work like a jetpack, which makes Hux a small bit more interesting.

THE ME HALF OF THE EQUATION

I picked up Hux from my local Target. I was actually out with my brother picking up the new Battlefront game, and happened to find this guy. I had been somewhat excited to get him, and I was happy to find him, but the figure’s definitely not one of the stronger entries in this line. I mean, he’s not terrible, but he’s not super fun either. The character is also getting a Black Series figure, so perhaps that one will be better.

Hux3

#0797: Endor Rebel Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ENDOR REBEL SOLDIER

POWER OF THE FORCE II

EndorRebel1

Star Wars has always had army builders and generic troops as an important part of the story (and toylines). The Imperial forces tend to get the most focus and have the most effort devoted to them, but we can’t let the bad guys have all the fun, right? Enter the Rebel Soldiers. The Rebels have a tendency to change up their designs to suit their environment, even more so than the Imperials, so they’ve got a few divergent looks. One of my personal favorites has always been their uniformed look from Endor, which has been privy to a few different figures over the years. Today I’ll be looking at the second of those figures.

THE FIGURE ITSELF

EndorRebel2The Endor Rebel Soldier was released in the 1997 series of Kenner’s Power of the Force II line. The figure is a little bit over 3 ¾ inches tall and he has the standard 6 points of articulation of the time. He doesn’t appear to be based on one Rebel Soldier in particular, but is instead an amalgamation of several of the Rebels from the Endor scenes. The sculpt is generally very well done, and I’d consider it above the usual quality of a PotF2 figure. The general proportions aren’t too exaggerated, and there’s only the slightest bit of pre-posing to him. The best work is definitely on the head, particularly the helmet, which is a great recreation of the film design. From the neck down the details are a bit looser. The Rebel uniform had a few different looks, and this figure tries to make itself work well enough for a bunch of them. It does this by going a bit fuzzy on some of the more defining elements of the uniform. The texturing on the uniform is pretty nicely handled, and rather abundant, which is a little surprising on a figure from this time period. The only real iffy part of the sculpt is his feet, which look more like ugg boots than the WW2 inspired look from the film. The paint on this guy is probably his weakest point. It’s not bad, mind you, just not terribly accurate to the film. Instead of the more complex selection of various colors, the majority of this figure has been painted in a generic camo pattern. It doesn’t look half bad, and I think it probably ends up making him a bit more interesting as a toy than a more faithful color scheme might have done. The Rebel Soldier includes a backpack and a rifle. Both are a little oversized, though not as comically so as other PotF2 figures.  He also included a “Freeze Frame,” which was the gimmick of PotF2 at the time.  It’s just a projector slide of Han, Leia, and several of the Endor Rebel Soldiers in front of the Imperial base.  It doesn’t add much value to the actual figure, but I guess it’s sort of nifty.

THE ME HALF OF THE EQUATION

I originally got this figure from the KB Toys outlet near where my family vacationed every summer. I recall just liking the basic look of the guy, and just being fond of the Endor Rebels in general. He was one of my favorite PotF2 figures, and I even gave him a name (Pterlick, after one of my middle school teachers). Somewhere along the line, I lost track of him. Ever since, every time I came across a selection of well-priced PotF2 figures, I’d always look for him. After a few years, I finally got lucky just last month, when I found him at the House of Fun. I’m glad to have him again, and even more glad that he held up as well as I remembered.

EndorRebel3

#0787: Poe Dameron & Riot Control First Order Stormtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

POE DAMERON & RIOT CONTROL FIRST ORDER STORMTROOPER

STAR WARS: THE BLACK SERIES

Poe&Trooper1

By the time you guys read this review, I’ll have already seen the new Star Wars movie. Lucky me! Unless it’s terrible, in which case, un-lucky me! Of course this review was written beforehand, since I had to, you know, go see the movie, so I can’t offer any actual thoughts on the movie. I also still don’t have any real information on any of the new characters, so, hey, enjoy one more review of me talking about stuff I don’t know! That’s the best, right? Let’s have a look at resistance pilot Poe Dameron and a Stormtrooper variant!

THE FIGURES THEMSELVES

This pair was released as part of a two-pack of figures from the new Force Awakens-branded Star Wars: The Black Series line. The set is a Target exclusive (in the US, anyway).

POE DAMERON

Poe&Trooper2“An ace pilot, Poe Dameron is a leader in the Resistance’s fight against the evil First Order. He soars into battle behind the controls of a modern X-Wing fighter.” So, yeah, that’s kind of the same bio we’ve gotten on every Poe figure so far. Hey, at least they’re consistent! This figure is based on Poe in his
“casual” look (the same look used for his “Armor Up” figure in the smaller scale). Poe is 6 inches tall and has 25 points of articulation. When this figure was first announced, the assumption was that he’d be making use of a lot of re-used parts, especially given that he and Finn have the same jacket. However, it appears that the only piece to actually be re-used is Poe’s head, which is the same piece as his single release figure (though you can be forgiven for not realizing, for reasons I’ll touch on in a bit). The likeness is decent enough, though not quite as good as some of the other figures. The rest of the sculpt is all-new, and quite well handled too. As with the smaller scale figures, Poe and Finn’s jackets have enough minor differences to give each of the figures a bit of uniqueness. Poe’s jacket is much sharper detailed in general, which makes it look a bit better. Poe’s paintwork is generally pretty good, though it is not without its drawbacks. The base color work is all pretty good, and there’s Poe&Trooper3not too much slop or bleed over. The clothing, especially the coat, have some nice accent work to help bring out some of the sculpt’s details. The head’s paint is easily the sloppiest, with the same wonky hairline that’s plagued all of the Poe figures so far, as well as a slightly messy attempt at giving him 5 o’clock shadow, which just looks a bit goofy. However, it’s leaps and bounds above the regular release Poe, who’s paint was, to quote Shaun of the Dead’s TV edit, “funk ugly.” Poe is packed with a rifle (which is the same model as his smaller scale figure), and a helmet.

RIOT CONTROL FIRST ORDER STORMTROOPER

Poe&Trooper4“Armed with specialized batons, the First Order’s Riot Control Stormtroopers are trained to subdue crowds in the most ruthlessly efficient manner possible.” Yeah, so here’s another Stormtrooper. But he’s got a new hat—I mean baton and shield! He’s the same figure as the regular First Order Stormtrooper from the first series of Force Awakens The Black Series figures.  It’s still a good sculpt, and you really can’t have too many Stormtroopers, so no complaints there. The main difference is the accessories. He gets the same pair of blasters as the regular release, plus a shield and baton, which make him an official “Riot Control” Stormtrooper. They’re both quite nicely sculpted, though he has a bit of trouble actually holding the baton.

THE ME HALF OF THE EQUATION

I ended up finding this set at one of my two local Targets, without too much trouble. The main appeal of this set (for me anyway) was definitely Poe, since I hadn’t yet gotten him in this scale. I don’t have his other figure to compare, but this one looks to be the better of the two. The Riot Trooper doesn’t offer much new, but the new accessories are pretty cool, and I won’t say no to another Black Series Stormtrooper!

Poe&Trooper5

#0786: Princess Leia – Boushh

Posted by Ethan Wilson in Reviews and tagged with , , , ,

PRINCESS LEIA ORGANA – BOUSHH

STAR WARS: THE BLACK SERIES

LeiaBoushh1

Hey, we’ve looked at two days of new and upcoming Star Wars stuff, why don’t we switch gears for a day and have a look at something a bit more old school. A ways back, in my very first Star Wars: The Black Series review, actually, I looked at the line’s first version of Princess Leia, which somewhat unfortunately presented her in Slave Leia get-up from Return of the Jedi. It’s not an outfit that really serves as a “definitive” version of the character, nor is it a design that translates all that well to action figure form. A lot of fans (myself included) have been clamoring for another, more action figure oriented (and more story prominent) design. It took a while, but Hasbro finally obliged, with Princess Leia in her Boushh disguise, a figure I’ll be taking a look at today.

THE FIGURE ITSELF

LeiaBoushh2Leia was released in Series 9 of Hasbro’s Star Wars: The Black Series. She’s figure #16, going by the second round of numbering. Leia, along with IG-88 and Clone Commander Cody, was one of the last three figures to be released prior to the switch-over to Force Awakens product. This Leia figure is also based on Return of the Jedi, but comes from the portion of the movie prior to her capture by Jabba, while she is still masquerading as the bounty hunter Boushh. The figure is just over 5 ½ inches tall and has 27 points of articulation. She stands a little taller than the previous Leia, but Leia was supposedly wearing lifts to help disguise herself further, so it doesn’t bug me too much. Leia gets an all-new sculpt, and a pretty darn good one at that. The body has some pretty great layering on the various parts of her costume, which is very nicely used to help hide a lot of the articulation. The pair of tanks on her back are a separate, removable piece. The belt/bandolier is also a separate add-on, but not intended for removal. Both are nicely sculpted and scaled well to the figure. The bandolier has a soft goods cape attached, which I feel works a lot better than previous fabric parts, so that’s good. When I reviewed the previous LeiaBoushh3Leia, I noted that I thought the head sculpt was a pretty good likeness to Carrie Fisher. This one’s better. It helps that this figure also gets a much nicer paintjob than the last. While I wouldn’t mind a little more fine detail work to highlight the subtleties of the sculpt a little more, what’s here is pretty serviceable, and there aren’t any glaring issues. Leia is packed with a removable helmet, a a staff, and a thermal detonator. The helmet is the star piece here, and it fits well on her head. The staff is technically supposed to be the same as one of the two included with Slave Leia, but it’s an all-new, much larger, much more accurate sculpt, and she holds it quite nicely. The thermal detonator doesn’t really fit in her hand, but it can easily be stowed on her belt, which is cool.

THE ME HALF OF THE EQUATION

The Black Series is infamous for its distribution issues, so Leia was out for quite a while before I was actually able to find one. However, I finally managed to find her at a Walgreens, in the midst of killing some time while my Mom and brother were participating in a 5K. I’m glad I got her, because it was killing me that Slave Leia was the only version we had. This one is just a much better figure all around.

LeiaBoushh4

#0785: C-3PO & R2-D2

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

C-3PO & R2-D2

STAR WARS: THE FORCE AWAKENS

C3P0&R2a

A lot of the merchandise for The Force Awakens has focused on the film’s newest characters. This has been met with some apprehension by a portion of the fanbase, who don’t want to invest a lot of money on characters they know nothing about. Fortunately, not everything is based on the new characters, so classic fans have a number of “safer” options, such as today’s focus figures, C-3PO and R2-D2.

THE FIGURES THEMSELVES

C-3PO and R2 are part of the first series of two-packs from Hasbro’s current Star Wars: The Force Awakens line. They’re one of two sets of figures in this particular assortment to actually come from The Force Awakens, though even they only just barely qualify.

C-3PO

C3P0&R2bFirst up is the panicky, overly emotional golden boy of the franchise, C-3PO, human-cyborg relations. The figure stands 3 ¾ inches tall and has the now standard 5 points of articulation. To be fair, the reduced articulation is actually a lot less of an issue on someone like 3PO, since he’s not the most agile character to begin with. 3PO shares his sculpt with the recently released Mission Series Tantive IV Two-Pack version of the character, which seems reasonable enough, since his design hasn’t really changed. It’s a pretty good representation of the character, and it has some nice detail work, especially on the arms and the one open section of wiring on his midsection. So, old sculpt, old design, old character. What makes this figure The Force Awakens-inspired? Paint. For the most part, he’s just the usual gold, but now he’s got a funky red left arm. Why? I have no idea, but there it is. On the plus side, it looks like he finally got his silver leg replaced with a proper gold one, so he’s not too patchwork. The paint is fairly decent overall, though the eyes are a little wonky. If you have the option, you might want to look through a few sets to find the one with the least wonky eyes.

R2-D2

C3P0&R2cAnd here’s R2, the one single character in the entire franchise whose look never changes. But he really needed another figure, I guess. Plus, it’s not like you can release a 3PO figure without him. That’s insane. R2 is about 2 ½ inches tall and has 3 points of articulation. That’s kind of lackluster for R2, since it means he can’t even properly do one of his signature poses. Not that it matters, since he doesn’t have his third leg. Like 3PO, R2 also shares his sculpt with the Mission Series version. It’s a reasonable enough, I suppose. The details on the legs are a little soft, but not terribly so. In general, he looks like R2, which is the main point here. Unlike 3PO, the paint doesn’t really do much to set R2 apart from the previous figure to use the mold. It’s just fairly basic R2 paint. It’s fairly cleanly applied, so that’s good, but it would definitely help the figure if he had some sort of wash to help bring out the details of the sculpt. As is, he feels a little bland. This R2 is different from the last one is one way: accessories. Yep, this guy comes with a pair of missile launcher that can be attached to the top of his legs. Something tells me these won’t actually be showing up in the movie, but at the very least they do match R2’s overall aesthetic, and the missiles are actually kinda neat.

THE ME HALF OF THE EQUATION

I didn’t really set out to find this pack or anything, but I saw it a few times at my local Target, and thought it was vaguely interesting. Then I realized I hadn’t actually bought a C-3PO figure since the POTF2 version from the 90s, and felt kinda bad, so I grabbed this set the next time I saw it. It’s certainly not the most exciting thing to come out of the new movie. 3PO’s got some merit, being slightly different from previous figures and being pretty well put together all around. R2 on the other hand, doesn’t really have much to offer, and is a “meh” figure at best. I’m kind of assuming most people will be getting this set for 3PO.

#0784: Guavian Enforcer

Posted by Ethan Wilson in Reviews and tagged with , , , ,

GUAVIAN ENFORCER

STAR WARS: THE BLACK SERIES

GuavianEnforcer1

Alright, it’s just three days until the release of Star Wars: The Force Awakens in theatres, and I’m pretty excited. To show off my excitement, I’m going to review one Star Wars item from now through the 18th. First up is yet another character I don’t know much about, the Guavian Enforcer. Apparently, this guy’s a new army builder, so that’s cool I guess. Let’s have a look at one of the two versions of this character currently available.

THE FIGURE ITSELF

GuavianEnforcer2“The security soldiers of the Guavian Gang wear high impact armor that makes them stand out among other deadly criminals.” The Guavian Enforcer is part of the second series of the Force Awakens-themed re-launch of Star Wars: The Black Series. He’s been designated as figure 08, which makes him numerically the third figure in Series 2. The figure stands 6 inches tall and has 28 points of articulation. The sculpt is totally new to this figure, and it looks to be a pretty good translation of the design from the film, at least from what I’ve seen. The design is certainly a change of pace for Star Wars. Some people have commented he looks a bit like Jason Todd as Red Hood; others have said he looks like an obscure Marvel villain, or even a product placement for Target. Me? I think he looks like one of Cobra’s specialized troopers from G.I. Joe. Which isn’t actually a bad thing, truth be told. The sculpt is pretty decent all around. There’s a lot of nice texture work, and the finer details look pretty cool. The proportions seem a little exaggerated, but without seeing the movie I don’t know for sure that they actually are. The paintwork on the Guavian Enforcer is fairly nicely handled. The jumpsuit is covered with a pretty thick wash of darker paint, which makes it look nice and worn in, and it brings out the texture work of the sculpt quite adeptly. There’s some slight bleed over on the helmet, and the silver gash could stand to be a little more subtle, but those are the only real drawbacks. The Enforcer gets a whole two accessories: one that looks like an old-fashioned tommy gun, and one that looks a bit more like a shotgun. Neither is painted, which is a bit of a bummer, but they’re sculpted pretty well.

THE ME HALF OF THE EQUATION

The Guavian Enforcer is the first of the Series 2 I’ve been able to find (well, I also found Constable Zuvio, but I don’t really like his design). I found him at my closest TRU a few weeks back. I quite like the design of this guy, and he makes for a pretty neat figure. Hopefully the Enforcers make for decent characters in the movie!