Tag Archives: Marvel Legends

#1757: Ronan

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

RONAN

MARVEL LEGENDS — MARVEL STUDIOS: THE FIRST TEN YEARS

“An avid loyalist to the Kree whose family was killed by the Kree-Nova War, Ronan agrees to a partnership with Thanos in order to take down the Nova Corps on Xandar once and for all.

Sent on a mission by Thanos to recover the mystical entity known as the Orb, Ronan discovers that the target he seeks is in fact an all-powerful Infinity Stone.  Ronan uses the stone to destroy the Nova Corps’s fleet, but is ultimately destroyed by his own greed when the Guardians of the Galaxy take the Orb back and use it to entirely obliterate him.”

I *almost* posted the Thor review today.  How foolish I was.  It’s okay, I’m looking at another tall, hammer-wielding dude from space, Ronan the Accuser!

The first Guardians had decent Legends coverage, but with quite a sizeable cast, there were more than a few notable missing players.  The Vol. 2 figures got us Yondu and Nebula, but the team’s main antagonist wasn’t quite so lucky.  Fortunately, he got in on this anniversary business.  Lucky him!

THE FIGURE ITSELF

Ronan is entry 6 in the Marvel Studios: The First Ten Years sub-line of Hasbro’s main Marvel Legends line. Like Red Skull, he’s one of the three standard single-release offerings (Mark VII Iron Man is the last of the three).  Ronan stands 7 inches tall and he has 30 points of articulation.  The figure is sporting an all-new sculpt, patterned on Ronan’s design from the movie.  The sculpt, not unlike Ronan’s design from the movie, is not without its quirks.  The biggest of these “quirks” is to do with his head piece and shoulder pads.  They are done here as one single piece, connected to the top of his head.  This has the unintended side effect of giving Ronan a very strange appearance should you decide to move his head, as his shoulder pads will be traveling with it.  It’s a very odd choice, but in the defense of this figure, it seems to be firmly rooted in the actual costume design, since Lee Pace wasn’t moving his head much in the movie either.  At least this way he still technically has all of his motion unencumbered, right?  Apart from that, the sculpt is actually pretty strong.  The texture work on his costume is nothing short of astonishing, capturing all of the various textures of his costume from the movie.  It also captures his rather imposing build, which means he looks appropriately menacing next to the rest of the Guardians.  If I had one other complaint about this figure’s sculpt, I’d say it’s the way the mid-torso joint’s been worked into the sculpt.  It’s a little bit obvious and slightly cumbersome.  The other articulation is worked in fine, though, so I can’t complain.  Ronan’s paintwork is overall pretty decent.  Not quite a subtly handled as some of the other recent MCU figures, but a bit of a step-up from the original Guardians offerings.  His eyes are really purple, signifying that this is a post-stone-powered Ronan, which makes him the best for fighting all of your Guardians.  Ronan is packed with his hammer, suitable for accusatory purposes.  It matches up with Ronan’s powered-up eyes, featuring the power stone mounted on one side.  It’s a shame yesterday’s Red Skull didn’t come with the Tesseract, since we could have assembled a bunch of the stone.  Oh well.  Ronan himself feels a little bit on the light side, with just the one extra, but I don’t know what else he could have gotten.  I suppose his larger size makes up for it a bit.

THE ME HALF OF THE EQUATION

I’ve always had a soft spot for Ronan, so I was a little bummed when he was left out of the assortment for the first movie (it didn’t help that I had missed out on the comic-based Ronan Legend from a few years prior).  Needless to say, I was delighted when he was announced to be part of this line, and was definitely at the top of my list.  Fortunately, Super Awesome Fiancee had my back, and grabbed him for me from my work.  Ronan may not be a perfect figure, but he’s a very good one, and one I’m very, very happy to finally have in my collection.

#1756: Red Skull

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

RED SKULL

MARVEL LEGENDS — MARVEL STUDIOS: THE FIRST TEN YEARS

“Obsessed with the power of the Tesseract, Johann Schmidt teams up with Dr. Arnim Zola to create a super-charged arms force that will change the fate of World War II…and the world.

Hydra leader Johann Schmidt creates Tesseract-powered weapons to destroy American cities, but doesn’t anticipate interference from newly-dubbed hero, Captain America.  In their first meeting, Schmidt removes his mask to reveal crimson skin, a signature that has earned him the name ‘Red Skull.'”

The MCU has run through an interesting period when it comes to tie-in toys.  Iron Man kicked things off with some Legends-esqe figures, which were a decent hit with the fanbase.  By the time of IM2, Hasbro was in the midst of their push for 3 3/4 inch figures, so it, and all of the movies up to Captain America: Winter Soldier would be in that smaller scale, with only a few choice offerings at the larger scale.  The recent shift has been completely to the Legends scale, but thanks to the rapid pace at which the MCU films hit, there are more than a few prominent characters missing from the line-up.  In honor of the MCU’s tenth anniversary, Hasbro’s put together a special sub-line of Marvel Legends, devoted to celebrating those prior films.  I’m kicking things off today with a look at one of the most prominent missing villains, the Red Skull!

THE FIGURE ITSELF

Red Skull is entry 2 in the Marvel Legends — Marvel Studios: The First Ten Years sub-line of figures.  He’s one of the three standard single-packed figures in the line-up, alongside the Mark VII Iron Man and Ronan the Accuser.  This figure gives us Red Skull in his more basic Hydra uniform, as he’s seen inside the Hydra base during several sequences of the film (there’s also a long-coated variant, which was offered at SDCC this year). Perhaps not his coolest look, but there’s a good reason for this choice.  He stands 6 inches tall and he has 29 points of articulation.  He’s sporting a brand-new sculpt, which is a pretty solid recreation of Skull’s look from the movie.  The head has a teeth-gritting expression, which is always a nice throw-back to the Skull’s earlier comics design.  Thanks to it being released 7 years after the fact, it’s also able to be far more accurate to the film’s Skull face than it would have at the time of the movie, so hey, bonus!  The body captures his uniform pretty well, though the articulation is perhaps not as worked into the sculpt as I might like. It’s especially noticeable at the mid torso joint; I feel an ab-crunch might have worked a little better there.  That said, it’s hardly the worst implementation of articulation I’ve seen.  He’s still got decent mobility, and the sculpt isn’t too terribly broken because of it.  The paintwork on this guy is pretty usual fare for an MCU release.  It’s pretty cleanly applied, and matches well to the movie.  The head actually gets some pretty subtle accent work all throughout, so that it’s not just a big chunk of bright red plastic with some eyes.  Speaking of eyes, the ones on this figure are using the printed technique, which doesn’t have quite the same impact here that it does on more human looking figures, but it does still make at least some difference.  Remember up at the top, when I said there was a good reason for this figure’s costume choice?  Well, the accessories are where that comes into play.  Skull doesn’t get anything character specific, but he does get three extra heads, a tactical harness, a Hydra gun, and an extra hand, allowing him to be turned into a few different configurations of the Hydra Soldier.  Sure, the uniforms aren’t quite an exact match, but they’re close enough to work in a pinch, and it’s really the thought that counts.  As an added bonus, if you’ve got any of the Black Series FO Officer bodies laying around, with a tiny bit of modification, they work pretty well for quickly building an army.

THE ME HALF OF THE EQUATION

Red Skull was purchased for me by my Super Awesome Fiancee.  She got a few of the Marvel Studios sets in at her work, and was kind enough to grab them for me.  First Avenger was my favorite of the Phase 1 films, so I was always rather saddened that it seemed to draw the short straw when it came to toys.  I’m glad that Hasbro’s been able to go back and retroactively amend that.  Red Skull isn’t a perfect figure, but I’d say he’s a fair bit better than he would have been had he been released at the time of the movie.  The added Hydra Soldiers pieces are just icing on the cake.  Now I’m resisting the urge to buy multiples…

#1745: Iron Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

IRON MAN

MARVEL LEGENDS (HASBRO)

“A Sleek suit design and technological upgrades let Tony Stark gear up as the Armored Avenger, Iron Man.”

I thought I was more or less done with the Infinity War-themed Marvel Legends, barring any late-game releases (which I’ve no doubt there will be), but no, no there was one more figure, that’s just been sitting there.  Waiting.  Watching.  Other “w” words as well…

Anyway, I’ve looked at most of the film’s major players, but there was one very prominent one missing, namely Tony Stark, aka Iron Man.  In a further effort to work my way through that pile of figures awaiting review, I’ll be looking at Stark’s latest Legends release today.

THE FIGURE ITSELF

Iron Man is the final figure in the Thanos Series of Marvel Legends, the first Infinity War-themed assortment of the year.  He’s also the last of the four specifically movie-based figures in the line-up.  And, most importantly, he’s the only figure in the set that isn’t needed to built the Thanos figure, which is why everyone was skipping him.  Tony’s wearing his Mark 50 armor from the film, which is also his *only* armor for the film, so I guess it’s a sensible choice, now isn’t it?  The figure stands 6 1/2 inches tall and he has 29 points of articulation.  His construction is very similar to the Mark 46 figure from the Giant Man series, but there are no actual pieces shared between the two.  This guy is an all-new sculpt, which does an okay job of capturing the Bleeding Edge armor’s design from the movie.  It’s not a spot-on recreation; it’s definitely not quite as sleek as the design in the movie.  There are far more pronounced ridges and connecting points, bringing its overall design closer to the Mark 46.  This is likely a symptom of Hasbro working from earlier designs to get the figure out before the movie.  Ultimately, it’s close enough that you know which armor it’s supposed to be, and it’s nowhere near as off as either Captain America or Cull Obsidian.  Fortunately, it’s got some pretty great proportions, and the articulation is also worked in pretty well.  Iron Man’s paintwork is decent and certainly eye-catching, but like the sculpt, it’s not 100% accurate.  The main culprit is the red.  It should really be a deeper, more metallic color than it is.  That being said, the color they’ve used is still nice to look at, so I’m not going to complain too much.  What I will complain about?  Just the figure’s single greatest failing: his accessories.  In the movie, Tony’s using this armor to create all sorts of nano-tech-based weaponry and tools.  What does this figure get?  An extra set of hands and the same blast effects pieces they’ve been using since the 46.  No extra attachments, no unmasked head, no build-a-figure piece.  The extra hands don’t even have hinges on the wrists.  That’s really weak.

THE ME HALF OF THE EQUATION

I passed on this figure quite a few times at retail.  After seeing the movie, I was really impressed by the armor.  I had some Cosmic Cash to spend at Cosmic Comix, so I ended up grabbing him from them.  And then he sat on my shelf for three months.  I know, bad Ethan.  I’ll be honest, I actually kept forgetting I hadn’t reviewed him, since I’d already looked at the basic figure.  The only real difference between the two is posability, and that’s a little sad.  He’s a figure that could have been a lot of fun–well, okay, he’s still a fair bit of fun, but he could have been a lot more fun than he is.  As it stands, he definitely feels phoned in.

1719: Spider-Man Noir

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SPIDER-MAN NOIR

MARVEL LEGENDS (HASBRO)

“Reluctant hero Spider-Man Noir battles bad guys and mob bosses alike in 1930’s New York City.”

Remember earlier in the week when I was talking about the gift that was Spider-Verse?  Well, this isn’t quite that.  I mean, yeah, Spider-Man Noir was part of “Spider-Verse,” but he predates the event, and had a pretty loyal fanbase before it.  Like the 2099 venture, the Noir line of comics was an venture by Marvel that’s mostly just remembered for its take on Spider-Man.  Noir has had three action figures, and I’m looking at the most recent of those today.

THE FIGURE ITSELF

Spider-Man Noir is part of the Lizard Series of Marvel Legends.  Despite being kind of divergent from the usual design, he’s technically the headlining figure, being the resident Peter Parker Spider-Man.  There are a few different versions of Spider-Man Noir out there, but this one’s based on his original comics design, which I’d hazard is his best.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  Despite his more unique design, Noir is actually largely made of re-used parts.  He’s built on the AIM/Ghost Rider body, with the trench coat from the Punisher/Red Skull body.  The torso has been tweaked to give him a new collar, and he’s also got a new belt add-on.  The overall body is a little bit of a frankenstein effort, but there’s no denying that it’s an improvement on the previous trenchcoat body.  At least this guy can put his arms all the way down.  Noir also gets a new head sculpt to top things off, which is a pretty impressive translation of the character’s distinctive mask and goggles.  As far as paint goes, Noir is understandably monochromatic.  He’s largely just a lot of black, with some minor changes in finish and the exact darkness here and there.  Noir is packed with a pair of pistols.  They’re the sci-fi looking guns from the AIM figure, which doesn’t seem quite right for a character like Noir, but I guess they work in a pinch.  I know Hasbro’s recently decided to move away from more realistic firearms, and Noir’s the first one to really be negatively impacted by it.  Noir also includes one of the Lizard’s arms.

THE ME HALF OF THE EQUATION

After grabbing the last four from All Time, I was a little too late to get this guy from them, so I had to resort to my usual sleuthing to find him.  I ended up coming across him at the FYE at the mall where Super Awesome Girlfriend was working until recently.  Noir’s a cool character with a cool look, and I’m glad to finally have a figure of the guy.

#1718: Prowler

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

PROWLER

MARVEL LEGENDS (HASBRO)

“Plagued by memories of his youth and desperate to prove his worth, Prowler turns to a life of crime.”

Hey look!  It’s Spawn!  Okay, so Prowler actually predates Spawn.  In fact, Prowler showed up during Todd McFarlane’s run on Spider-Man, just before he left Marvel…to create Spawn.  Guess the guy liked Prowler.  Unlike his McFarlane-owned reskin, Prowler hasn’t been particularly privy to action figures.  He got one in the ’90s, likely due to his resemblance to Spawn.  Then nothing for 25 years, and now he’s finally gotten his second action figure.

THE FIGURE ITSELF

Prowler is part of the Lizard Series of Marvel Legends.  Interestingly enough, this is the *second* Hobie Brown figure in this particular assortment, since that’s who’s under the Spider-Punk mask as well.  Who would have thought we’d get a Spider-Man assortment with twice as many Hobie Browns as Peter Parkers.  Certainly not I.  Prowler is seen here in his classic attire, which is what he’s worn for most of his career (barring a quick change-up for his solo series a few years back).  The figure stands 6 1/2 inches tall and he has 32 points of articulation.  Prowler is built on the Spider-UK body, making him the second non-Spider-Man to make use of it.  It works well enough, though Prowler’s build has fluctuated a fair bit over the years.  He gets a new head and hands, as well as new add-on pieces for the cartridges around his wrists and ankles.  The new pieces are all pretty fun, and pretty good matches for the character’s design as well.  To complete is look, he borrows the cape from Moon Knight.  While it’s a nice cape, and not a bad match for what Prowler usually wears, the piece doesn’t quite sit right on the body.  As a result, the collar ends up being rather floaty.  Not the end of the world, but a minor annoyance.  Prowler’s paintwork is pretty decent stuff.  His usual colorscheme is done well, and manages to not look too silly.  The photos make it look like his purples don’t match very well, but this isn’t the case in person.  There *are* two different purples in play, but the difference is matte vs. metallic, rather than two actually different shades.  Prowler has no character-specific accessories, which is a shame, since an unmasked head would have been cool.  Oh well.  He does at the very least include a piece for Lizard, specifically his leg.

THE ME HALF OF THE EQUATION

Like yesterday’s Spider-Woman, I wasn’t certain I needed a Prowler figure, but I wanted a Lizard, so I got him.  It was an easier purchase, since he’s at least a new character.  Ultimately, he’s a serviceable figure, if not without his flaws.  Still, even if you don’t know anything about the character, I think this figure is rather fun.

Prowler was purchased from my friends at All Time Toys.  If you’d like one of your own, he’s currently still in-stock through their website, or you’re looking for something else, check out the great items available through their eBay Store.

#1717: Spider-Woman

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-WOMAN

MARVEL LEGENDS (HASBRO)

“Spider-Woman uses heightened senses and powerful venom blasts to strike down any enemies of justice!”

Okay, took a break from Legends for some patriotic appreciation, but now I’m back over in the Legends corner.  Still looking st the Spider-Man stuff, specifically his distaff counterpart, Spider-Woman!

THE FIGURE ITSELF

Spider-Woman is part of the Lizard Series of Marvel Legends.  She’s the second main universe Jessica Drew we’ve gotten during Hasbro’s tenure.  She’s wearing her newest costume, introduced following Spider-Verse.  It’s a more real world design, no doubt put together for easy movie translation.  The figure stands 6 inches tall and she has 27 points of articulation.  She’s built on the Phoenix body, with a new head, torso, and pelvis.  The new pieces change up the body pretty suitably, resulting in a fairly nice looking translation of the design.  The head is definitely the nicest piece.  It takes a page out of Mockingbird’s book, and gives her removable glasses.  While it’s not super needed for this particular figure, it has the added benefit of giving an unmasked head to those who already have the classic Spider-Woman from a few years back.  The removable glasses actually work a bit better here, leaving almost no visible connection points when removed.  The paintwork on Spider-Woman is quite sharp, and very cleanly applied.  The face in particular is really nice looking, especially with the glasses in place.  If there’s one downside on this figure, it’s her general lack of extras.  She’s got the torso of Lizard, which is pretty sizable, to be fair, but she’s got nothing character specific.  A web line or some extra hands would be nice.

THE ME HALF OF THE EQUATION 

I don’t have any particular attachment to this Spider-Woman design, so I wasn’t really itching for a figure of it.  However, I’m really wanting to build Lizard, and this figure looked nice enough.  I ended up grabbing her from All Time Toys, which also helped.

Speaking of All Time Toys, they still have this figure in stock on their website, if you want one of your own.  Or, if your looking for something else, check out their eBay store for tons of other cool stuff.

#1715: Spider-Punk

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SPIDER-PUNK

MARVEL LEGENDS (HASBRO)

“Spider-Punk causes major rifts in an alternate universe ruled by a corrupt President Osborne.”

Spider-Verse was really just an amazing gift to the people at Hasbro, wasn’t it?  They’ve literally got years worth of completely legitimate Spider-Man variants to choose from, and each time they release another, the demand for the remaining ones just grows.  They’re also getting Spider-Verse writer Dan Slott to geek out pretty hardcore online, which I’m certain helps with the sales of the figures.  The Spider-Verse member I’m looking at today is certainly amongst the coolest; it’s Spider-Punk!

THE FIGURE ITSELF

Spider-Punk is figure 3 from the Lizard Series of Marvel Legends.  He’s one of the two Spider-Men in this assortment, though he’s not actually a Peter Parker figure.  He stands 6 1/4 inches tall and has 34 points of articulation.  As a Spider-Man variant, it’s probably not a shock to find out that Spider-Punk is built on the Pizza Spidey body, what with him filling out that basic physique and all.  He gets a new head, feet, and even hands (with proper fingering for his guitar, and a pick!), as well as an add-on piece for his denim vest.  The new matches very well with the old, and the vest piece in particular is very sharply detailed and full of texture. The head is surprisingly more than just a basic spidey head with the mohawk added, giving this Spider a more narrow set of eyes than we tend to see. It helps to further separate him from that legion of Spider-Men we’ve got going on.  His paintwork is up to the usual snuff, with the colors matching the basic Spidey, as well as the source material.  Kudos to Hasbro for putting a fully detailed torso and arms under the vest, though I can hardly see myself displaying him without it.  Spider-Punk is packed with his guitar, of course, but also gets a second left hand.  At first glance, it’s just a basic thwipping hand, but if you look closer, it’s actually throwing up the horns.  A subtle, but very important, change, which adds so much to the figure.  Spider-Punk also includes one of the arms of the Lizard, who continues to look very, very cool.

THE ME HALF OF THE EQUATION

I’ve been loving the whole Spider-Verse theme that’s been going on, and this guy’s been near the top of my wishlist for Spidey variants, so his announcement for the assortment was very exciting for me.  Along with Lasher, he was my biggest want from this assortment.  The final figure absolutely doesn’t disappoint.

As with yesterday’s Lasher figure, I purchased this guy from my friends over at All Time Toys.  They’re currently in the process of recovering from the recent Ellicott City flood, so please check out their website and eBay storefront and give them a little bit of support.  They don’t have Spider-Punk in stock, but they have a few of his series-mates, as well as plenty of other awesome offerings!

#1714: Lasher

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LASHER

MARVEL LEGENDS (HASBRO)

“A sinister mercenary of evil, Lasher thrives off of the power of the malevolent Venom symbiote.”

Oh man, Symbiotes are big again.  What is this, the mid-90s?  No, it can’t be. Not enough pouches and leather jackets.  But Symbiotes. Definitely Symbiotes.  With a Venom movie hitting theatres this year, I suppose there was a desire to capitalize on that, so the fine folks at Hasbro are working in some more Venom-related characters into their Marvel Legends line.  There’s a whole Venom-dedicated assortment hitting very soon, but we got a little bit of a teaser earlier this year, in the form of Lasher!

THE FIGURE ITSELF

Lasher is part of the Lizard Series of Hasbro’s Marvel Legends.  It’s our first Spider-Man assortment of 2018, and it started hitting a few months ago…in theory.  It’s shown up some places, but still doesn’t seem to have hit in full force.  Anyway, Lasher is the resident Symbiote in the line-up.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  Lasher is made up entirely of re-used pieces, which is mostly not an issue, apart from one thing I’ll touch on in a moment.  He’s built on the Pizza Spidey body, which caused a bit of a stir when he was first unveiled.  A lot of people felt he should be on a larger body, in part, no doubt, due to the larger build of Lasher’s old Toy Biz figure.  However, if you look at Lasher’s comic appearances, he’s typically a little skinnier than the other Symbiotes.  Perhaps the 2099 body would have been a better compromise, but I don’t mind this.  Lasher also uses the head from Scarlet Spider, and the hands, feet, and tendrils from Superior Venom.  The head’s a pretty basic piece, and works well here.  The hands and feet are a bit more specific, but still work very well for the character, and it’s nice to see them pop up again.  The tendrils are perhaps my one complaint about the figure.  I’ve never been a huge fan of this particular piece, even in it’s initial use, but for Lasher to not have tendrils that can actually do anything just seems wrong.  I’d have much preferred to see him use the Agent Venom tendril piece.  On the plus side of things, Lasher’s paint work is very striking.  Application is very clean, and the two shades of green chosen really complement each other well.  As always, that metallic plastic looks pretty awesome. Lasher’s only accessory (if we’re not counting the fact that the tendrils remove, which I kind of don’t) is the head to the Lizard Build-A-Figure.  While it perhaps doesn’t add any value to Lasher himself, it’s an impressive enough piece that he doesn’t feel too light.

THE ME HALF OF THE EQUATION

Lasher is hands down my favorite Symbiote.  The old figure was a bit of a grail, and he’s been standing with my Legends collection since I got him.  When this guy was shown off, I was definitely excited.  I was even more excited when he and the rest of the series showed up at All Time Toys back in April, thus signifying that All Time would be carrying Legends going forward.  I’m very happy I have this figure, even if he has a few flaws.

Speaking of All Time, this is my first review from them since they were hit by the recent flood on Main Street in Ellicott City.  They’re been steadfastly working in the weeks since, and they’ve just gotten their website and eBay store back up and running.  Please give them a quick visit.  While they don’t have this particular figure in stock, they do have a couple of his series-mates, as well as a whole bunch of other cool stuff!

#1711: A-Force

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

SHE-HULK, SIF, MARVEL’S SINGULARITY, LADY LOKI, ELSA BLOODSTONE, & MONICA RAMBAEU

MARVEL LEGENDS (HASBRO)

Spawning out of 2015’s Secret Wars event was an all-female super team dubbed A-Force.  Gimmicky?  Perhaps, but of course, so was the whole event.  I appreciated it for what it was: a chance to focus on some of Marvel’s fun secondary characters, who maybe get overlooked a little too often.  The event-tie-in got its own spin-off, and ongoing that went 10 more issues.  And, in 2017, the group even got an exclusive boxed-set of Marvel Legends, which I’ll be looking at today!

THE FIGURES THEMSELVES

The A-Force boxed-set was a partnered offering between Entertainment Earth and Toys R Us, which first hit at SDCC 2017, before eventually making its way to Toys R Us retail establishments.  Well, for a little while, anyway.  The set includes six figures: She-Hulk, Sif, Singularity, Lady Loki, Elsa Bloodstone, And Monica Rambaeu.

SHE-HULK

A blood transfusion from Bruce Banner leaves Jennifer Walters with the gamma-powered abilities of the Hulk.

She-Hulk is the one character in this set who’s had a Legends release before.  Three of them, in fact.  But the most recent of those was still a decade ago, so we feel overdue for the update.  She’s also the biggest name in the set, and one of the easier to produce figures just based on parts.  The figure stands 7 inches tall and has 28 points of articulation.  She-Hulk is built on the same body used for both Thundra and Valkyrie, which was debuted on a She-Hulk figure, just not a Jen Walters one.  It’s a decent enough body, though it’s a little out dated compared to the others in the set.  Ultimately, it’s not bad, of course, but the articulation scheme’s a bit archaic.  This body’s definitely the next one that needs replacing.  She-Hulk’s got a new head sculpt, which is very nice.  The expression is perhaps a touch bland for Jen, and nothing’s ever going to top the original Hasbro release for me, but this one’s still very well crafted.  Jen’s paintwork is nice, bold, and colorful.  The paint on the face is very clean, as are the costume’s color transitions.  The metallic purple looks very slick, as well, but then I’m a sucker for metalic purple.  She-Hulk included no accessories, but what would you give her, really?

SIF

As a gifted warrior goddess of Asgaard, Sif traverses time and space through teleportation.

Sif is an important character in the world of Thor, but rarely travels outside of that particular realm.  Seeing her interact with others in A-Force was admittedly pretty cool.  Though she may not be the heavy hitter here, Sif is very much this set’s star.  She stands 6 3/4 inches tall and has 27 points of articulation.  Sif is one the newest body in this set, making use of parts from last year’s Angela figure (which I’d predicted back when I reviewed that figure).  She does, however get a new head, upper torso, upper arms, and cape and skirt piece add-ons, all of which add-up to a very different looking figure than Angela.  My main complaint about Angela was not liking the character, so Sif gets an extra leg up here.  This gives the body a new chance to shine, and I find myself really enjoying this figure.  Her paint is very clean, the colors are very bold, and that bright red helps her to be the most eye-catching member of this set.  The blue wash on the fur lining of the cape is perhaps a touch heavy, but I’ve seen worse, and it helps to distinguish it from the rest of the white.  Sif is packed with a sword, which seems pretty sensible to me.

MARVEL’S SINGULARITY

Singularity is a multi-dimensional being whose powers of energy manipulation grant her unique psionic abilities.

Singularity is probably the most obscure of the figures in this set, by virtue of being the only character in the set to have no existance outside of A-Force.  Singularity is sort of a personified walking pocket dimension, and is something of a gender-flipped Beyonder from the original Secret Wars.  While she’s perhaps not the most known character, she’s important to the specific event this set was commemorating, and has the added bonus of an appealing design.  The figure stands 5 3/4 inches tall and she has 29 points of articulation. Singularity is built on the Spider-Girl body, which is always a good one, though its mold might be starting to show its age a bit.  She gets a new head sculpt, which captures the art style of the book pretty well, while also melding well with the rest of the body.  The big thing that sets her apart is her color scheme.  She’s molded in clear blue plastic that has these little metallic flecks all through it, and then has a little metallic purple airbrushed over that in a few key places.  It makes for quite an interesting look, and it’s a great way of capturing how she looks in the comic.

LADY LOKI

A being of Frost Giant descent, Loki also possesses Asgardian powers of shape-shifting and sorcery

Lady Loki is sort of a confusing character in the context of this set, since she’s technically the same person as the usual Loki (who was still running around elsewhere during Secret Wars), and she’s also technically in Sif’s body, but Sif is also in this set.  Best not to think about it too much.  The figure stands 6 inches tall and she has 28 points of articulation.  She’s built on the Black Cat body, which means she’s a fair bit smaller than Sif, who she supposedly shares a body with.  Of course, the armored details and such on the Sif body would have made this impossible to do here, and I’d much rather have an inaccurate Loki than a slightly diminished Sif, so I’m letting it slide.  She *does* share a cape with Sif, though, so there’s at least that.  Her head and her skirt add-on piece are both new to this figure, and they’re both quite nicely sculpted, though as with She-Hulk, I might have liked a little more expression in the face.  My figure had a slight molding issue, which left some noticeable flashing at the bottom of her chin, but an X-acto blade cleared that up fine.  Loki’s paint is probably the most complex in the set, with all the scaling detaining and such.  It’s all pretty clean, and once again the metallic colors are looking pretty cool.

ELSA BLOODSTONE

A gun-toting, foul-mouthed monster hunter, Elsa Bloodstone follows in the family tradition of fighting supernatural evils.

Originally a pretty thinly-veiled rip-off of Buffy: The Vampire Slayer, Elsa Bloodstone was re-purposed by Warren Ellis for his cult hit Nextwave series, which completely changed the character, making her far more absurd, and far more entertaining.  Her placement in this set continues the Nextwave appreciation that began with the Dirk Anger head included with Nick Fury.  The figure stands 6 inches tall and she has 27 points of articulation.  She’s built on the medium-sized female body, but since no member of Nextwave is truly complete without their trenchcoat, she also gets the arms and jacket pieces from Scarlet Witch.  In addition, she gets a new head, knees, and feet, as well as a belt add-on with a holster.  The whole thing adds up to another very unique looking figure that’s surprisingly true to her Nextwave appearances.  Elsa is the best accessorized figure in this set, getting both her twin shotguns, as well as an oversized revolver.

MONICA RAMBEAU

Gifted in her control of the electromagnetic spectrum, Monica Rambeau uses powerful blasts of energy to shut down her enemies.

Ah, it’s Monica Rambeau, aka Captain Marvel, aka Photon, aka Pulsar, aka Spectrum, aka the most unlucky superhero ever when it comes to keeping a code name.  She’s a favorite of mine and a lot of other fans, and probably one of the bigger draws for this set.  Also, like Elsa, she’s a member of Nextwave.  Two members in one set!  Alright!  Of course, Monica’s not quite in her Nexwave gear, instead wearing her Ultimates costume that she had at the time of the event.  Still, that’s a costume that’s very Nextwave-inspired, so I’m calling it a win.  Monica uses the same basic construction as Elsa, but with standard leg pieces and without the holster.  She also gets a new headsculpt, which is tied with Sif for nicest in the set.  Monica’s paintwork is mostly black and white, which looks very striking, and is in keeping with the design.  There’s a slight pearlescent finish to the white sections, which adds a nice energy-like quality to her design.  She came with no accessories, which is a little disappointing.  Not even an energy effect?

THE ME HALF OF THE EQUATION

Okay, you saw who was offering this set, so you probably know how I got it.  Yep, this was another Toys R Us liquidation purchase.  I’d seen the set when it was new, but only felt like I really needed three of the six figures included, so the price was a bit prohibitive.  I decided I would wait it out, and if the set ever came down in price, I’d get it.  I firmly set my entry price at 25% off and waited.  When the liquidation began, my store still had a whole stack of this set, and they didn’t really move any faster, but I stopped by one day and they only had a single set left.  What was the discount? 30% off.  So, home with me it came.  Sif is this set’s star, with Elsa and Monica picking up right behind her.  They were the three I wanted, and I’m very happy with them.  Loki and Singularity are both pretty nice as well, but as more event/time specific characters, I have less need for them.  She-Hulk’s the real weak link here, but even as the weakest, she’s still a very nice figure!

#1707: Agents of Hydra

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HYDRA AGENT & HYDRA ENFORCER

MARVEL LEGENDS (HASBRO)

“Driven by rage, these advanced Hydra super soldiers are prone to clash with anyone in their paths.”

Back when the newest incarnation of Marvel Legends was first launched, Hasbro was still figuring some things out.  The Captain America-themed Mandroid Series still had some troubles with distribution, and some…interesting choices in case packouts.  The assortment was split into two waves.  For the first wave, the Agents of Hydra swap figure’s packout was split evenly between Red Skull and the basic Hydra Agent.  Both moved pretty quickly, but there was definitely more demand for the army buildable Hydra Agent.  When the second wave hit, Hasbro decided to repack…Red Skull?  And then the Hydra Agent never resurfaced, so finding one was a mean feat.  Last year, having started to learn from their earlier woes, Hasbro did a re-release of the Agent, alongside a new Hydra Enforcer figure, in an exclusive two-pack.

THE FIGURES THEMSELVES

The Agents of Hydra two-pack was a Toys R Us-exclusive offering under the greater Marvel Legends banner.  It *was* a TRU-exclusive, emphasis on “was.”  It was supposed to be released last summer, but apart from being on their website for exactly one afternoon, it never really showed up.  And then, it sort of did, in the wake of all of the closing stuff.  Now it’s made its way to Entertainment Earth, who have been grabbing all of the former exclusives.

HYDRA AGENT

The basic Hydra Agent is, for all intents and purposes, a straight re-issue of the Mandroid Series release.  He’s a more modern interpretation of the Hydra troopers, in the vein of Bob, Agent of Hydra.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  He’s build on the Bucky Cap body and he has add-ons for his harness and belt.  Both pieces are unique to this figure and his predecessor.  They’re well sculpted, and well fitted to the body.  He’s also got a unique head, which is a good recreation of the Hydra Agent’s usual design.  His paintwork is a point of marked improvement over the last release.  Not only is the application a lot cleaner across the board, but he also gets a few more details, particularly the Hydra emblem on his shoulders.  Also an improvement are his accessories.  The last Hydra Agent included two rather goofy sci-fi-y rifles.  This one instead gets two less goofy rifles, which look a lot better.  He also gets a vest to swap out for the harness and and two extra heads.  The first head is Taskmaster’s alt-head, recolored to match the Hydra soldier scheme, which is nice and imposing.  The second is the same one included with the Nick Fury figure from the Giant-Man Series.  It all makes for a nice selection of options on this figure, which is especially nice for army building.

HYDRA ENFORCER

The Hydra Enforcer is a newer concept, and seems to be the figure that’s actually being referred to in the bio on the back of the box.  Despite being a new concept, the figure is just as much re-use as his pack-mate.  He stands 6 1/2 inches tall and he has 32 points of articulation.  The figure is built on the Hyperion body, specifically the Nuke variant of the body, with the pants and combat boots.  He also gets Nuke’s vest and belt, as well as the head of Captain Britain, which works surprisingly well with the Hydra theme.  The design presented by these piece complements the basic agent pretty well, and he seems to fit the overall Hydra aesthetic nicely.  His paintwork is pretty similar to the standard agent, and the application is all pretty clean.  The Enforcer is packed with a large rifle (re-used from the AIM Agent), a missile launcher (re-used from Drax), a knife, and two extra heads.  The first head is Nuke’s, matching the other pieces on the figure.  It’s been re-decoed with a pretty intensive scar.  The second head is re-used from Radioactive Man, done up with a sort of a Jason Statham look.  Both are pretty fun, and far more specific designs than any of the basic heads, which I guess makes sense, since you’d assume the Enforcers are a more unique bunch.

THE ME HALF OF THE EQUATION

Having missed out on the original Hydra Agent release, I was definitely on board for this set.  Of course, I couldn’t find it anywhere, so that all meant for nothing.  Then I was going through my local TRU during it’s liquidation process, and there was just a stack of this set.  Yay for me, right?  It’s a solid offering, very definitely.  It’s only real drawback is that it’s a little difficult to army build if you don’t want a bunch of Enforcers.  Still, a very fun set, and I’m glad it’s finally making its way out to the people who want it.