Tag Archives: Marvel

#2503: Battle-Action Mega Armor Wolverine

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BATTLE-ACTION MEGA ARMOR WOLVERINE

X-MEN (TOY BIZ)

Toy Biz’s ’90s Iron Man, though far from a failure, was also not quite the success of some of their other Marvel-based toy lines from the same period.  Following the slow sales of its fourth assortment, the line was brought to a close, cancelling not only its fifth set of figures, but also some off-shoot products, which included a line of items dubbed “Mega Armor,” which would effectively take off from the Hulkbuster armor and give both Iron Man and War Machine larger mecha suits to pilot.  It was a cool concept, but not one that Toy Biz could get retailers to support under the Iron Man name.  However, with the molds ready to go, they had to do *something* with them, so they were quick to repurpose them under two of their more successful brands, X-Men and Spider-Man.  Why Spider-Man and the X-Men were running around in big mechs is anyone’s guess, but I try not to complain too much about such things.  Whatever the case, it gives me a Wolverine variant I haven’t yet looked at, so I might as well jump in on that, right?

THE FIGURE ITSELF

Battle Action Mega Armor Wolverine hit shelves in 1997, under the main X-Men line branding.  To start with, they did Wolverine and Storm with the armor, but others would eventually follow down the line.  The Mech suit is about 9 inches tall and has movement at the shoulders and wrists, as well as a cockpit that opens in two spots to let the standard figure inside out.  Said standard figure is about 5 inches tall and has 10 points of articulation.  Wolverine’s mech suit is the one that was originally intended for Iron Man, and as such it’s definitely got a lot of details that really match up with both the modular armor and with the Hulkbuster armor’s depiction on the Iron Man cartoon in the ’90s.  It’s certainly a cool looking piece, though the very stiff nature of it does make it a little more difficult to really play with.  It’s more of a set piece than anything, and that becomes really even more apparent when you stick Wolverine in it instead of its original intended occupant.  The included Wolverine figure is interesting in that, when you really get down to it, he’s not *technically* a Wolverine at all.  He’s actually a re-use of the main line’s Morph figure, just with that figure’s alternate Wolverine head in place instead of the standard.  While the Wolverine head works fine on that figure as a more quick gimmicky set-up, the two character’s really don’t share the same build, resulting in a very anemic looking Wolverine.  He’s still very posable, however, so he’s at least a pretty playable figure.  When it comes to paint, the mech suit gets a pretty notable overhaul on the color scheme, moving away from the intended Iron Man scheme into something more in line with Wolverine’s usual palette.  It’s not a terrible look, but it’s definitely a departure, and I don’t know that it suits the mold as well as the original set-up would have.  For his part, the included Wolverine also gets a pretty major overhaul as well, with a totally blue number, some silver accenting and a whole bunch of weird gold techno lines thrown in to top it all off.  Really weird set-up, and I’m really not sure exactly what they were going for.  It’s certainly….different?  Oh, and he’s of course wall-eyed, because that’s just how you do, I suppose.  In addition to the Wolverine figure being included, the mech suit also gets a claw weapon thing to hold in one hand, and has a spinning hand feature on his right side and an extending punch feature on the left.  He’s certainly got his fighting options all laid out for him.

THE ME HALF OF THE EQUATION

I didn’t have the whole mech suit thing as a kid, but I did have just the Wolverine from it, as it had been found at my Dad’s work, and he ended up bringing it home for me.  I always wanted the whole suit, in any of its many released forms, but I just never did get one.  But lucky me, one came into All Time in a collection, and also lucky me, Christian had just happened upon some really good trade fodder for me at Goodwill, sort of kind of as a birthday thing, meaning I was able to get this guy essentially free of charge.  That worked out pretty darn well.  This thing is so majorly goofy, and I so majorly love it.

#2500: Hawkeye

Posted by Ethan Wilson in Reviews and tagged with , , ,

HAWKEYE

AVENGERS (HOT TOYS)

Wow, can you believe I’ve written 2500 of these reviews?  I mean, you probably can.  The numbers are right there, at the top of the reviews and all.  I’ve given total accountability here.  So, you know, you shouldn’t be surprised.  I mean, I am, but it’s my site; I’m allowed.  Well, 2500 feels like a monumental enough review for me to dig out another of my higher-end figures, so why not chip away a little more at my rather impressive Hot Toys Avengers collection.  I’ve looked at a good chunk of the first film’s line-up, but today I’m taking another step towards completion with Hawkeye!

THE FIGURE ITSELF

Hawkeye was released as part of Hot Toys’ core Movie Masterpiece Series, numbered at 172.  He’s the third of the Avengers-branded figures, following Nick Fury and the quick re-hash Iron Man Mk VI.  Given that he’s really the most basic of the core team, it’s not a huge shock.  He wound up as one of the first to actually make it to release as well, getting to collectors in the fall of 2012.  The figure stands 11 3/4 inches tall and he has over 30 points of articulation.

Hot Toys usually puts their star work into the actor’s portraits on the head sculpts, and they’ve turned in some really impressive likenesses.  Hawkeye’s not a bad effort, but he’s not one of their best either.  There’s definitely a lot of Jeremy Renner in there, but it’s not quite as spot on as their work tends to be.  I think it’s the eyes that really throw things off, because putting the sunglasses on helps the likeness a bit.  I think they might be a touch too close together.  Later Hawkeyes from HT would get the Renner likeness down just a bit better, but this one wasn’t a terrible attempt by any means.  The paint work is still up to the usual HT standards, meaning he’s really damn lifelike.

As is the usual set-up, Hawkeye’s costume is a mixed-media affair.  The actual suit is a tailored piece, made from a number of layered pieces.  It works out pretty well, but ultimately isn’t quite as slick as some of the other suits they’ve done.  There’s a lot more in the way of faux zippers and straps, and it just looks slightly more cosplay than usual for HT.  For me, the biggest hang up, though, is the front of the tunic.  The two sides of it are meant to hook onto the brim of his pants, in order to hold things a bit tighter, but can be removed to allow for slightly better posability.  The trouble is that the hooks just don’t really hold very well, so it just tends to pop loose a lot.  The boots are solid sculpted pieces, which is fairly normal for the line, but not the most posable choice.  Still, they do look pretty nice.  Hawkeye’s got his quiver, which is a plastic piece, and even has the rotating arrangement of arrow heads at the base like in the film.  Connecting the quiver to the rest of the costume proved a bit of a challenge for HT, so they ended up including two options.  The first is a small plastic clip, which connects to the back of the quiver and slots into the center of his back, leaving a more seamless join.  This is technically more film accurate, but ultimately isn’t as secure, and tends to droop over time.  The second option’s a cloth strap.  It’s pretty basic, but it works, even if it’s not quite as film accurate.

Hawkeye’s underlying body is one of the muscle bodies.  Given the exposed arms, this makes sense from an aesthetic standpoint, but is sadly a little limiting from a posing stand point, given the lessened range on the elbows and shoulders.  It makes getting decent archery poses out of this figure a little tricky.  You can definitely still manage some good ones, but there’s a lot more careful posing involved.  Otherwise, it’s a well proportioned body for the character, so I can at least get behind that.

Hawkeye’s accessory complement is definitely an impressive one, especially given his lower price-point at the time of his release.  He gets:

  • 6 hands
  • 2 bows
  • 16 arrows
  • 11 specialized arrow heads
  • Sunglasses
  • Display stand

The hands come in relaxed and gripping on the right side, and relaxed, pointing, and two different arrow-drawing hands for the left.  The only downside to the hands is that the standard arrow-draw hand has the fingers all molded as one solid piece, requiring some slight modifying if you want him properly holding the arrow.  The two bows are effectively the same, with one difference: one has a string and the other doesn’t.  This allows for the unstrung one to make use of the joints on the mold, allowing it to be collapsed like in the movie.  The arrows are all without heads, allowing the specialized ones to be swapped out in the movie.  The one real downside to them, though, is that you have to manually feed them into the quiver, which is a real pain, and hard to get just right.  The sunglasses are, of course, an artifact of promotional images, since he doesn’t actually wear them in the film, but it’s still cool to get them, and they look pretty snazzy.  The stand is another basic oval stand, but it’s at least consistent with the rest of the Avengers figures.

THE ME HALF OF THE EQUATION

It was Hawkeye that swayed me into actually getting on board with the HT Avengers line-up, but it wasn’t when he was solicited.  No, it was instead when he sold out on Sideshow’s site, and I realized that if I really wanted these figures, I would need to jump on them early.  Fortunately, I was able to jump on the waitlist for this guy and get him without too much trouble.  Ultimately, he’s not as impressive as other HT figures.  I do still like him a lot, though, and he does go well with the rest of the set, so he’s certainly got that going for him.

#2498: Captain America – Final Battle Edition

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA — FINAL BATTLE EDITION

S.H. FIGUARTS (BANDAI)

Bandai Japan’s S.H. Figuarts is a toyline that I’ve looked at a handful of times previously on the site, but the very vast majority of the items I’ve looked at from the line have been, rather predictably, I suppose, based on Japanese properties (well, excepting of course Freddie and K-2, but they were sort of stand outs).  They’ve been dabbling in plenty of American properties over the years, but up until now, I’ve been totally content to stick with the domestic options on those.  As of late, they’ve been really getting into the MCU side of things, with Infinity War and Endgame both getting a noticeable focus.  Today, I’m taking a look at their latest take on Captain America, specifically in his Endgame attire.

THE FIGURE ITSELF

The Final Battle Edition Captain America started showing most places in the last month or so, right alongside the similarly Final Battle-themed Iron Man from the movie.  This marks our second Endgame Cap in the Figuarts line; the first one hit closer to the film’s theatrical release, and featured a much more paired down accessory selection, largely to avoid spoilers and the like.  Even as a basic release, it sold out pretty quickly, so Bandai was fairly quick to get another version out there.  The figure stands about 6 1/4 inches tall and he has 34 points of articulation.  He’s on the taller side of the Figuarts spectrum (due to Chris Evans being generally a pretty tall guy), but he’s still going to be a little small to scale with Legends.  Obviously, that’s kind of expected.  This release of Endgame Cap appears to be using the same core sculpt as the prior release.  The articulation is a little bit on the obvious side, falling back in line with what I’m used to from Figurarts.  There’s a pretty amazing range of motion, though some of the joints on mine, particularly his left elbow, are a little looser than I’d like.  I do wish the tolerance were just a touch better there.  As with any Figuarts sculpt, it’s definitely got a little bit of a stylization to it, to bring him in line with the rest of the figures.  It works pretty well for Cap, though, and gives him even more heroic proportions than usual. It also looks astoundingly svelte when compared to the Hasbro version, which was itself a bit beefy, I suppose.  It’s not a bad match for Evans’ build in the film, though, albeit in a slightly caricaturized way.  It does manage to get the costume details down a bit more accurately, I think, than the Legends release.  There are three separate heads included with this figure: masked with calm expression, masked with battle expression, and fully unmasked (which also gets its own separate neck post, since there’s a little bit of the helmet visible on the standard neck).  Of the three, I the neutral masked is probably the weakest.  The likeness just isn’t quite there, and he looks a little void of personality.  I really like the other two heads, though.  The intense expression is great for battle poses, and the unmasked head has a pretty fantastic Evans likeness on it.  The paint work on this figure marks a difference from the original release, which gave us a slightly more pristine Cap.  This one takes the “Final Battle” title and runs with it a bit, so he’s got a bit of grime and dirt.  It’s not enough to make him look “damaged”, but it gives him a little extra flavor.  All three heads have printed faces, which look a little wonky from up close, but great at a distance.  The gold color used on the hair of the unmasked head looks a little weird, but after having him in hand for a bit, I don’t actually hate it.  The major selling point of this guy is his accessory complement.  In addition to the three heads mentioned above, Cap also includes five pairs of hands (fists, relaxed, hammer gripping, flat, and with the shield strap in hand), his shield in both regular and broken forms, with interchangeable straps to go along, and Mjolnir with interchangeable energy effects.  The hands offer up some fun posing variety, and the flat palmed ones even have a tab to allow the corresponding strap with hanger on it to be attached, letting Cap actually hold his shield by its edge.  The shield’s straps also allow for use on either arm, one-handed hold, or mounting on his back, again really giving posing options.  Both shields are great pieces, and it’s awesome to finally have the destroyed one in toy form.  Mjolnir practically steals the show here, though, as the swap out panels with the energy effects are pretty amazingly dynamic for posing.

THE ME HALF OF THE EQUATION

I don’t typically jump into the Figuarts realm for stuff that has other 6-inch lines, but I’ve been kicking myself for passing up the chance to grab the AoU Cap at a good price, and I was a little bummed when I missed the first release on Endgame Cap.  Fortunately, the updated version came along, and he’s even better, so it works out well.  When All Time got these figures in stock, I came very close to grabbing this guy right away, but ultimately held off.  However, Super Awesome Wife was nice enough to work with Jason to get me one for my birthday, and I really couldn’t be happier.  He’s a really fun figure, and goes great with the rest of my ever-growing Captain America collection.

If you’d like a Cap of your own (or the Iron Man that goes with him, perhaps), he’s still in-stock at AllTimeToys.com. And, if you’re looking for other cool toys both old and new, please check out their website and their eBay storefront.

#2497: Warstar

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WARSTAR

X-MEN (TOY BIZ)

“Members of the Shi’ar Imperial Guard, aliens B’nee and C’cll unite their superhuman abilities symbiotically as the unstoppable Warstar! Possessing superhuman strength and the ability to discharge electrical blasts, Warstar stands ready to strike at any and all enemies of the Shi’ar Empire – even if it means crossing the width of the galaxy itself!”

First appearing early in the Phoenix Saga, the Shi’ar Imperial Guard’s original membership were all homages to artist Dave Cockrum’s previous work on Legion of Super Heroes.  When the team reappeared during “The Dark Phoenix Saga” a few years later, Cockrum’s replacement John Byrne was tasked with a few more members to pad out the roster a bit during their fight with the X-Men.  Instead of creating more Legion homage characters, these new characters, including today’s focus Warstar, were wholly original, while still loosely fitting the theme.  No doubt for reasoning related to the potential issues that surround homage characters and toys, Warstar being a non-homage character made him a slightly cleaner choice when it came to toy coverage.

THE FIGURE ITSELF

Warstar was another inclusion in the “Phoenix Saga” Series of Toy Biz’s X-Men toy line.  He is by far the most obscure character in that particular mix, but he did at least get a little bit of focus during the cartoon version of the Saga, which made him at least somewhat memorable to the buyer base, I suppose.  The figure stands 5 inches tall and has 8 points of articulation.  He lacks a neck joint, but in his defense, there’s a sensible reason for that.  As touched on in the bio up top, Warstar is actually two symbiotically-linked beings.  The main body is C’cll, the larger of the pair.  It does a respectable job of replicating his larger mechanical frame.  He’s perhaps a touch more boxy than C’cll tends to be depicted, especially when Byrne was drawing him, but by and large, it’s a pretty close match.  Borrowing a page from the previously released Tusk figure, C’cll has a little hatch and a small lever on his back.  Sliding back the hatch and pushing up the lever reveals a tiny B’nee figurine, who’s been hiding back there the whole time.  Both of them are just a touch underscaled for the line, and B’nee doesn’t get any sort of articulation, but it’s a fun feature nevertheless.  Warstar’s paintwork is pretty solidly handled.  It’s largerly all one color (for C’cll, anyway; B’nee *is* one color), but it’s a pretty slick metallic green.  Mine’s taken quite a beating over the years, but that doesn’t seem like the worst thing in the world for a character with “war” in his name.  The only extra included here is the small B’nee figure; no other weaponry or weird accessories thrown in this time.  Also, he’s one of two figures in the “Phoenix Saga” assortment not to get any additional accessories when moved over to the larger card, presumably because of how sizable he was in the first place.

THE ME HALF OF THE EQUATION

Warstar was a rather early addition to my collection, purchased for me by my Nana, specifically at my request.  Interestingly, I had no clue who the character was (I hadn’t yet seen his appearance on the cartoon), and actually thought he was a Titanium Man figure, who I wanted to have to face off against my Iron Man figure I’d just gotten.  It wasn’t until later that I realized my mix-up (and got a proper Titanium Man), though I can’t really say I was ever upset to own a Warstar.  He’s a pretty fun figure of a pretty fun character, and is probably one of my favorites from the line.  I’d love to see him get an update as a BaF or Deluxe Legends offering.

#2490: Space Wolverine

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SPACE WOLVERINE

X-MEN (TOY BIZ)

“The X-Man known as Wolverine will travel anywhere for a good fight with the forces of evil – even to the far reaches of outer space! Wolverine’s space armor protects him from the hostile conditions of deep space, while still allowing him to bring his adamantium claws to bear on alien evildoers! Even in this harsh environment, Wolverine is still the best there is at what he does!”

The eighth assortment of Toy Biz’s X-Men line was the first to properly theme itself, being based on the Pheonix Saga, which had just been adapted for the cartoon.  While a number of the character choices were pretty self-explanatory, they were still faced with a need for a Wolverine variant.  So, they kind of made one?  I mean, it’s not too far of a reach.  It’s a space suit variant, and in both comics and cartoon, the team does go into space.  Never in anything that looks like this, but still…

THE FIGURE ITSELF

Space Wolverine was, as noted in the into, released in the eighth series of Toy Biz’s X-Men line.  He marked the line’s first dabble into made up Wolverine variants, something that anyone who followed the Day of Wolverines will know was far from at its end here.  At least this one was tame, I suppose.  The figure stands a little over 5 inches tall (continuing the upward size trend on Wolverines) and has 8 points of articulation.  Due to a returning of the Series 1 style retractable claws, he lacks any sort of elbow movement, but at least the posing isn’t quite as stiff as it was on the Street Clothes Wolverine.  As far as sculpting goes, this Wolverine gets a head that’s really similar to Wolverine II’s, albeit with some slightly sharper details.  The body is kind of on the wide side, at least in contrast to previous Wolverines.  It does match the overall bulking up trend that Logan went through as the line and the decade progressed, however.  The space suit for some reason doesn’t actually cover Wolverine’s whole body, leaving part of his costume exposed.  I guess his costume really doesn’t breathe?  That can’t be all that comfortable, can it?  Like going everywhere in a tyvek suit.  Yuck.  I guess it helps with branding, though, so there’s that.  In terms of paint, Wolverine again stays on-brand, with what we see of his costume being the usual colors, and the space suit continuing those general colors, but in a more metallic sense, so it’s more golds instead of yellows.  It honestly works pretty well.  There was also a variant of this figure released a bit later alongside a CD-Rom including the original Phoenix Saga issues, which swapped out the gold for a metallic blue.  I also have this figure…somewhere.  Unfortunately, all I could find at the time of this review was his helmet.  Maybe I’ll find him and I can run an addendum, I guess.  For the original release, as with all of the Phoenix Saga figures, there were two releases, once with the short card and once with the wider card the following year.  The initial version included just his removable helmet, second version(which is the one I had) added a gun and two of Shatterstar’s swords to the mix.

THE ME HALF OF THE EQUATION

I was still new to the collecting game when these guys came out, so I got most of the assortment new, Wolverine included.  He was a gift to me from my parents, shortly after we moved into the house they live in now, and I recall that he was accompanied by an X-Men carrying case to keep all of my figures in (which was a far more realistic goal back when I received the case and it could actually hold all of my X-Men figures).  He’s a little more gimmicky than earlier Wolverines, but he is at least a somewhat sensible variant.

#2483: Corsair

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CORSAIR

X-MEN (TOY BIZ)

“Snatched from the Earth by a passing Shi’ar spacecraft, Christopher Summers was pressed into service as a slave of that galactic empire. But Summers burst the bonds of his captivity, and now in the company of his fellow Starjammers, he roams the cosmos as the free booting space pirate known as Corsair!”

“The Phoenix Saga” opened up a lot of new avenues for the X-Men.  I guess going into space will do that for you.  In addition to contending with the whole Shi’ar Empire, they also came upon a band of space pirates, the Starjammers.  Originally pitched by artist Dave Cockrum as a standalone set of characters, they were reworked into the crew of a displaced Christopher Summers, the man eventually revealed to be the father of X-Men Cyclops and Havok (and Vulcan, too, but I don’t wanna talk about it).  As the bio above notes, Christopher took on the name “Corsair” and even managed to get himself an action figure, which I’m looking at today!

THE FIGURE ITSELF

Corsair was released in the 8th Series of Toy Biz’s X-Men series, officially dubbed the “Phoenix Saga” Series, and designed to tie-in with the storyline’s adaptation on the cartoon.  Corsair played a large role in that adaptation, so his presence in the tie-in made quite a bit of sense.  Interestingly, Corsair was actually the third Starjammer to grace the line, following Ch’od and Raza’s inclusion in Series 7.  The figure stands 5 inches tall and he has 9 points of articulation.  He’s a pretty standard offering for the line in terms of mobility and construction, being hampered by no odd lack of joints or the addition of any weird action features.  He’s just a nice, basic sculpt.  The details are all pretty cleanly handled, and he’s got a nicely balanced set of proportions.  He’s perhaps a touch exaggerated, but certainly no where near as badly as later figures in the line.  He does go for Corsair’s slightly updated shoulder pad-bearing design, introduced in the early ’90s (because everyone had to have shoulder pads in the ’90s, of course).  It’s the one used on the cartoon, and it really wasn’t much of a change from the original design, so it ended up working out okay.  If there was one change I’d like to see on this figure, I wouldn’t have minded if his hair had a little bit more of a dynamic flair to it; it was usually pretty fabulous, and it seems a little tame here.  It’s not the end of the world, though; I’ll learn to live, I’m sure.  Corsair’s paint work is overall pretty cleanly handled. It’s basic, but it’s also bright and eye-catching, as Corsair should be.  Corsair was originally packed with a sword, gun, and grapple.  My figure’s only got the sword left, but that’s honestly the best part, so I’m okay with it.  Interestingly, Corsair is one of only two figures in the Phoenix Saga Series not to gain extra accessories when the assortment was moved over to the larger-style cards.  I guess they felt like he had enough already.

THE ME HALF OF THE EQUATION

I got Corsair as gift from my Nana back when he was new.  I don’t remember exactly the occasion, but I know it wasn’t a birthday, because my cousin Rusty also got one at the same time.  Maybe it was an end of school thing?  Or possibly an Easter thing?  I don’t know.  I do know that Rusty had no clue who Corsair was and definitely didn’t appreciate getting him as much as I did.  He’s a pretty solid figure, so I definitely am glad he was one I held onto.

#2473: Sugar Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

SUGAR MAN

MARVEL LEGENDS (HASBRO)

Mixed in with a lot of re-imaginings of prior characters, Age of Apocalypse did also have a few honest to gosh new characters, wholly original to this reimagined universe.  Included in that grouping is today’s focus, Sugar Man, a character that even 25 years later still has no main universe counterpart.  In fact, he’s more or less his own main universe counterpart, since he was one of the four character’s to travel into the 616 following AoA’s wrap-up, and spent a good 20 years cropping up in the background of various X-Men stories.  He’s also really gross.  Yuck.  Well, let’s review him, shall we?

THE FIGURE ITSELF

Sugar Man is the Build-A-Figure for the predictably titled “Sugar Man Series” of Marvel Legends.  Given his monstrous size and odd proportions, he’s a rather natural choice.  While this is his first Legend, it’s not actually his first figure, if you can believe it.  He managed to get a figure from Toy Biz’s 5-inch line back in the day.  The figure’s 6 1/2 inches tall, and just about as wide, and he’s got 38 points of articulation.  Though he’s got plenty of joints, he’s not exactly the most exceedingly mobile figure in the Legends line-up.  In the figure’s defense, however, a lot of the limits are imposed by the character’s design, and he’s certainly a dramatic improvement over the old ’90s figure.  Sugar Man’s sporting an all-new sculpt, which isn’t really that surprising, because really, who would he share parts with? It’s definitely an impressive sculpt, and a really hefty one, too.  The detailing is all nice and crisp, and there’s a great dynamic flair to him with the facial expression and his flailing tongue.  He is truly hideous, and I can’t really say I’d want him any other way.  Hideous is kind of Sugar Man’s game.  There’s also just a lot going on with this sculpt, from the unique gesturing on each of the hands, to the novelty buttons lining his suspenders.  Someone certainly had fun with this one.  In terms of paint, Sugar Man does a pretty solid job of translating the quite frankly rather messy color jobs the character was usually sporting in the comics into something that looks alright on a mass produced figure.  There’s a fair bit going on here, just like with the sculpt, with a fair amount of accenting, especially on the head/torso.  Sugar Man is packed with his hammer, complete with “SUGAR” inscribed on one side.  He can either hold it or keep it stored on his belt, though it’s a little tricky to get it in there, given his general shaping.

THE ME HALF OF THE EQUATION

As with a lot of AoA stuff, I can’t really say that Sugar Man was a character I was dying to have in figure form.  Heck, I don’t even have the old one.  However, he did certainly look pretty impressive, and I was already planning to grab the whole assortment, so here we are.  He’s certainly one of the most unique BaFs we’ve gotten, I’ll give him that, and he fills out the rest of the assortment well.

This is definitely one of the most focused assortments of this line we’ve gotten, what with the very defined theme and all.  My favorite is definitely Morph, who’s quite basic, but just such a clean translation of his comics design.  X-Man’s another high ranking one for me, with Jean not too far behind.  Sunfire was certainly better than I’d expected, and I guess Dark Beast isn’t too bad either.  I can kind of take or leave Weapon X and Wild Child, but I definitely knew that much going in.

#2472: Dark Beast

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

DARK BEAST

MARVEL LEGENDS (HASBRO)

“Dr. Henry McCoy constantly experiments on himself to enhance his superhuman powers.”

Within the AoA universe, there were a handful of characters who swapped over to the other team in terms of morality and good vs evil alignments.  Many former villains found themselves as reluctant heroes, but on the flipside, a few previously heroic characters became very much not so.  One of the most notable was Hank McCoy, known as Dark Beast in this new continuity.  Where the other was a kind-hearted, good-natured man who contrasted with his supranym, the AoA version was just downright evil.  He also wound up as one of the four characters to be “saved” from the AoA universe when it reverted back to the standard 616, taking him from a crossover villain to a full X-Men villain proper.

THE FIGURE ITSELF

Dark Beast is the final single-packed figure in the Sugar Man Series of Marvel Legends, and our first proper antagonist in the line-up.  It’s the first Legends Dark Beast, but not the first ever figure, as he was released as a Minimate and as an under-articulated 6-inch figure by Toy Biz back in the day.  The figure stands 7 1/2 inches tall and he has 36 points of articulation.  The torso, arms, and feet are all shared with the Caliban Series Beast from last year, which was pretty much expected from the word go, what with them technically being the same character and all.  I do have to say, it actually works a little more to this particular figure’s advantage, since Dark Beast is typically depicted as being a far more towering figure, making the extra height less of an issue here than it was with the standard release.  To fully set him apart, Dark Beast gets a new head, pelvis, and legs.  The new head replicates the further mutated appearance of McCoy from the story, with his much wilder hair, and an evil grin cracking across his face.  For the hair, there was a lot of variance in the comics as to its actual shape.  This one opts for something closer to the wacky Wolverine hair side of things, which I think ultimately helps him read a little quicker as Beast, so it works for me.  I do quite like the facial expression, and it furthers my hope to see a calmer head for the standard Beast at some point.  The new legs give Hank his funky banded metal capris he was sporting throughout the event.  They’re very ’90s.  They’re very goofy.  But, they’re also very accurate, so, hey, good job Hasbro.  Another thing that had some room for interpretation in the books was Dark Beast’s coloring.  When he initially appeared, he was very clearly grey, presumably to show he had stayed his initial furry color in this universe, but as he appeared more often, he shifted more to a darker blue shade.  This figure kind of splits the difference on that front, going for a rather dark grey with a hint of blue to it.  It’s really the best possible choice, and looks good on the figure.  His actual paint application is all pretty clean and solid, and there’s more going on with it than you might realize at first glance.  Dark Beast is packed with the same two sets of hands as his normal universe counterpart, as well as Sugar Man’s Hammer, which is meant to go with the Build-A-Figure.

THE ME HALF OF THE EQUATION

Dark Beast is an interesting concept to be sure, as well as a good excuse for Hasbro to get another use out of that mold they debuted last year, so he was definitely not a surprise addition to this line-up, nor is it a huge shock that he’s the hottest figure in the set in terms of demand.  With all that said, while I can certainly appreciate this is a well-made figure, I don’t personally find him to be quite as fun as some of the others in the set.  He’s fine, but that’s about where I leave it.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2471: Morph

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

MORPH

MARVEL LEGENDS (HASBRO)

“A natural mimic, Kevin Sydney transforms himself into any shape at will.”

Okay, it’s fine guys.  We got through Weapon X and Wild Child.  Now, we get to the good stuff.  Yeah, now we get to the best part of Age of Apocalypse: Morph!  After obscure ’60s X-foe Changeling was re-imagined as Morph in order to have a sacrificial lamb in X-Men: The Animated Series‘s pilot episode, he was then further re-imagined in 1995’s line-wide reboot with Age of Apocalypse.  Admittedly, he was so far re-imagined that he was practically a new character, but that doesn’t mean he wasn’t an *awesome* practically new character.  In fact, he was so awesome that Marvel even wound up creating an almost identical version of the character to star in Exiles, meaning today’s figure is kind of a two-fer.  Yay!

THE FIGURE ITSELF

Morph is figure 6 in the Sugar Man Series of Marvel Legends, and is notable for being the only of the single releases to actually be a new character for Legends.  While we’ve gotten two prior AoA Morphs, they were a Minimate and a 5-inch Toy Biz figure.  So, this is kind of notable, in that regard.  The figure stands 6 1/4 inches tall and he has 34 points of articulation.  Morph’s built on the 2099 base body.  In the series, his shape-shifting meant that his physique was somewhat variable, but this base is a pretty solid middle ground for his usual default.  He gets a new head, forearms, and boots, as well as a new add-on for his cape (which I wouldn’t be too shocked to see show up on the inevitable AoA Magneto).  The new parts are all pretty clean and cartoony, which is certainly appropriate for the character.  I especially like the head, because, as simple as it is, it really just hits all the proper notes.  I love the wide eyes and the slight smirk.  It’s definitely a “less is more” situation.  The new gloves and boots are surprisingly detailed for what they are, but unlike the equivalent pieces for the Bucky Cap body, they aren’t riddled with too much over texturing so as to clash with the rest of the pieces.  The cape’s an okay sculpt, but is just a touch floaty for my taste.  It’s not quite as bad as some of the earlier Hasbro capes, but it does hinder his playability just a touch.  His paint work is, like his sculpt, rather on the clean and basic side.  For the most part, I’m a fan, even of the outlining of the mouth and brow.  The only thing I’m not quite as big on is how dark the primary blue on the body suit is.  If it were just a touch brighter, I think the figure would really pop.  Morph doesn’t get any accessories of his own, which I suppose isn’t as much of a surprise given how light the rest of the set has been.  That said, it might have been nice to get a few different shape-shifting attachments.  He does get another leg for Sugar Man, though, so at least it’s not a total loss.

THE ME HALF OF THE EQUATION

So, as you may have gathered from the intro, I rather like AoA Morph.  I mean, I rather like Morph in general, in all of his many forms, but this is AoA Morph we’re talking about here, so I should maintain the focus.  I had the Toy Biz AoA Morph as a kid, and I’ve been waiting for an update since we got Blink.  This guy was at the top of my list for this set as soon as it was shown off, and he’s, unsurprisingly, my favorite figure from the set.  Sure there are a few things that might make the figure perfect, but he’s still a really, really solid figure.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2470: Weapon X

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

WEAPON X

MARVEL LEGENDS (HASBRO)

“Armed with adamantium claws and superhuman healing abilities, Weapon X joins the battle against Apocalypse.”

And we’re jumping back into the Age of Apocalypse fray.  We last left off with a figure that didn’t fill me with much enthusiasm, and we’re picking up with…another one of those.  Yeah, it’s a Wolverine episode, guys.  Oh, wait, I’m sorry…Age of Apocalypse…it’s a Weapon X episode, guys.  While others around him got new backgrounds and personalities, Logan more or less remained the same in AoA, apart from not being “Wolverine” and being down a hand.  Not that either of those ended up making much of a difference.  I guess it helps justify the toy, though.

THE FIGURE ITSELF

Weapon X is figure 5 in the Sugar Man Series, which seems surprisingly late in the number scheme for a Wolverine, but, well, I guess he’s not a Wolverine, is he?  By the way, if you guys think that joke’s going away, you’re sadly mistaken.  That joke’s here to stay, unlike the Wolverine name…or Logan’s hand…or self-respect.  This marks the third time as Legends figure for AoA Logan, but given that the last one was during the Toy Biz days, an update feels like a good call.  The figure stands 6 inches tall and he has 32 points of articulation.  Like most Logans these days, he’s built on the body from the Juggernaut Series Wolverine, with the cleaned up shins from Weapon X and a new head and forearms.  Essentially, it’s just a pretty straight update on the old figure in terms of part re-use, since that one was also built on its era’s brown costume body.  The new head’s definitely the star attraction here.  Logan’s hair got crazier and crazier as we got further into the ’90s, and in AoA it was at almost peak craziness.  That’s translated here, as this guy’s got one hell of a mane on him.  It puts all other Wolverine hair to shame, really.  How much hair gel do you think he has to use to get that all to stay in place?  I bet it’s a lot.  Like, obscene amounts.  And in a post-apocalyptic setting no less.  The intensity of the hair is matched only by the intensity of his facial expression.  This guy’s definitely feeling a need to show all of those teeth he’s got, in just the most intense way possible.  On the new forearms front, the right one’s not too different from previous releases, but the left of course gives us Logan’s stump, albeit with his claws extended from it.  The paint work on this guy is generally pretty decent.  The basics are all pretty sharp and clean, and they’ve done a respectable job handling the stubble and his arm hair.  He’s also got his signature forehead tattoos, which beg the question of how exactly does Logan manage to get tattoos?  Seems like too much thought for a ’90s comic, I suppose.  Weapon X is packed with a spare stump without the claws extended, thereby allowing for his appearance from earlier in the story, as well as one of Sugar Man’s legs.  It’s too bad we couldn’t also get an alternate burned head to fully replicate all of the looks from the two Toy Biz offerings.  That would have helped to up this figure’s appeal a little bit.

THE ME HALF OF EQUATION

I owned the Toy Biz Weapon X.  I sold the Toy Biz Weapon X (well, okay, not the burned head variant).  I didn’t really miss the Toy Biz Weapon X.  I can’t say I really felt the need for a new and improved version either.  But, I was getting the rest of the set, and I’m kind of doing this completist thing with the line, so I guess I wasn’t missing him, was I?  He’s fine.  Better than I expected, honestly.  It’s just that the AoA version of Logan isn’t really as exciting as other characters.  But, it’s not like we were going to ever get this assortment without him, so I guess it could be worse.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.