Tag Archives: Star Wars

#2807: The Mandalorian

Posted by Ethan Wilson in Reviews and tagged with , , , ,

THE MANDALORIAN

STAR WARS RETRO COLLECTION (HASBRO)

NOTE: This review was written before June 6th.

“The Mandalorian is battle-worn and tight-lipped, a formidable bounty hunter in an increasingly dangerous galaxy.”

A week and a half ago, I took a look at one of Hasbro’s latest ventures into reviving some Kenner nostalgia, courtesy of their oddly-placed Retro Marvel line.  Marvel’s not the most natural fit for such a thing, but Star Wars, on the other hand, is pretty much perfect.  Hasbro tested the waters the last two years with some re-issues of the Star Wars and Empire Strikes Back lines, but they’re finally making their way into something newer, albeit still fitting that Retro feel, with a whole assortment of new figures based on The Mandalorian.  I’m kicking off my look at them with the show’s titular character today!

THE FIGURE ITSELF

The Mandalorian is the first of the seven figure line-up that is the Mando-themed series of Hasbro’s Star Wars Retro Collection, which is technically the third series under the Retro Collection banner, but the first to be offered up to retailers at large, rather than just being an exclusive.  The figure stands 3 3/4 inches tall and he has 5 points of articulation.  His design is based on his first episode appearance, which is on one hand kinda weird, but on the other rather befitting the style, since any vintage figures would have undoubtedly been based on the early look seen in promotional images and the like.  It’s an all-new sculpt, patterned a little bit after Boba Fett, I suppose, mostly by virtue of them both having that distinctive helmet.  Through the lens of vintage Kenner, it’s a good sculpt.  It fits the general style, but certainly has that slightly higher level of detailing that came with 1980 and later figures.  The articulation has clear range of motion, and the hands are clearly designed for holding the guns, so he’s very well-utilized in that way.  The one slightly odd bit is the “cape.”  He’s got a vinyl cape patterned after the ones seen on the ones seen with the early line figures.  While it’s certainly well-recreated, technically, a character like the Mando, coming from a post Jedi-era, would have a cloth cape, as the vinyl ones had been phased out on new figures by the time of Jedi.  So, technically, it’s inaccurate.  Of course, the vinyl reads as more obviously retro, I suppose, which has its own benefits.  Mando’s paint work is actually surprisingly involved, which I guess again makes it *technically* inaccurate, but it looks good, and it still has that proper feel, so I can’t really complain too much.  The Mando is packed with his long rifle and his blaster pistol, both of which he can hold pretty nicely.

THE ME HALF OF THE EQUATION

I was a sucker for the 5-POA Star Wars lines, and was quite upset when they were phased out for Rise and Mandalorian, because they’re kind of my main jam for the toys.  I was hoping we might get something later down the line.  This isn’t exactly what I had in mind, but I can’t say I’m unhappy about it.  Hasbro did a very good job of capturing that retro feel here, and they’ve made a figure that’s just good clean fun, and generally more functional than the more detailed counterparts.  I look foraward to getting the inevitable beskar re-deco, and whatever else Hasbro wants to throw at us with this mold.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2806: Jawa & “GONK” Droid

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

JAWA & “GONK” DROID

STAR WARS: POWER OF THE FORCE II (HASBRO)

NOTE: This review was written before June 6th.

“Jawas are small, foul smelling machine-scavengers of Tatooine’s deserts. Crafty traders and talented mechanics, they often use power ‘Gonk’ droids to provide energy for their scavenged goods.”

Though they only got one single release in the vintage line, and they’re only in one film of the original trilogy, when it came to Power of the Force II, Kenner was determined to give the Jawas some more proper coverage.  They got in early, with a pair of them joining the line’s second year.  There was also a follow-up in 1997 with one of the creatures.  Finally, we got one last one just as the line was on its way out, this time alongside possibly the best droid in the whole franchise, the “GONK” Droid!

THE FIGURES THEMSELVES

The Jawa and “GONK” Droid were added to Power of the Force in 1999, officially falling into Hasbro’s tenure in the last two years.  They were part of the second round of figures for the year, running concurrently with the Episode I figures.  The Jawa stands about 3 inches tall (placing him between the two from the two-pack in sizing) and has 6 points of articulation.  Hasbro was getting a little more experienced with robe construction, so this one’s actually got a separate robe piece for the bottom half, with actual legs sculpted beneath it.  It means more articulation, but also means less motion, since the robe only allows so much movement.  In terms of pure functionality, the prior design honestly worked a bit better, but I suppose the appearance is a little better on this one.  The depth of detail on this new figure was more involved, so he’s a bit more technically impressive, although the overall appearance is really the same as the larger Jawa from the two-pack.  The paint work on the Jawa is virtually identical to the prior releases, right down to the light-piping square on the top of his head.  If it ain’t broke, don’t fix it, I guess.  The GONK winds up as a bit more of an accessory.  He’s about 2 3/4 inches tall and he has moving legs, but not in a way that really counts as articulation.  There’s a button on the left side, which moves right leg backward, and the left leg forward.  Unfortunately, to facilitate this feature, that means the default set-up has the right leg forward and the left leg backward, with no way to lock them into place in a regular standing position.  And he’s not really stable in the default pose.  You have to rely on rubber bands or twisty ties if you want to keep his legs in a regular pose.  That’s not ideal.  On the plus side, it’s at least a fairly nice sculpt, far removed from the vintage design, and transitioning into something far more screen accurate.  These two are packed with two accessories: a blaster for the Jawa and a CommTech chip, which actually does play sounds for both figures.  That’s pretty cool.

THE ME HALF OF THE EQUATION

I’ve always liked the Jawas, and, of course, I have a fondness for the GONK due to my brother Christian’s attachment to the LEGO version, so this was a set that it’s kind of surprising how long it took me to acquire.  I actually had it for a while before reviewing, as I’d picked it up during one of my big splurges of Power of the Force buying from All Time.  But, it remained sealed hanging on my wall for a bit, until one in a ratty package came through, and I decided it was easier to swap them, since I was going to open mine eventually anyway.  Hey, at least it pushed me to finally open them.  These figures are overall pretty good, but they both suffer a little bit from some over-engineering.  Fortunately, it’s easy enough to work around, and, especially in the case of the GONK, it’s worth working around, because it’s a very nice looking figure.

#2799: Captain Piett

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN PIETT

STAR WARS: POWER OF THE FORCE II (KENNER)

NOTE: This review was written before June 6th.

“Following Admiral Ozzel’s fatal mistake during the assault on Hoth, Darth Vader promoted Captain Piett to the station of Admiral. Piett remained in command of Vader’s Executor until its destruction during the Battle of Endor.”

The Empire’s most visible and most marketable troops are certainly the Stormtroopers, but they aren’t the ones that get to make all of the decisions.  That’s left to the far less marketable Imperial Officers.  During the vintage toyline, Kenner didn’t actually make any named officers, giving us just one generic one to cover things.  When it came time to fill things in for Power of the Force II, they rectified that by actually doing a few of the named officers.  This included one Firmus Piett, the longest lived ranking Imperial in the films, serving as Admiral over both Empire and Jedi.  But we’re not talking about that.  No, we’re going before that, when he was just a Captain.  For reasons.

THE FIGURE ITSELF

Captain Piett was added to Power of the Force in 1998.  Though he’s billed as a Captain, it’s notable that the bio describes his whole career path in the film, and we also never got an Ozzel, so he might as well just be an Admiral.  The figure stands 3 3/4 inches tall and he has 6 points of articulation.  Structurally, he’s quite similar to the Tarkin figure.  It makes sense, what with them being in the same uniform, and having a rather similar build.  It’s notable that they’re still totally unique from each other, though; no shared parts at all, even the ones that are almost identical.  It’s a reasonable enough sculpt.  Like Tarkin, he’s a little bulked up, but not nearly as much as earlier figures in the line.  The head doesn’t really look much like Kenneth Colley, who played Piett in the film.  Colley has some rather distinctly harsh lines on his face, and they aren’t really here.  He’s also got a much stronger jawline than he should.  Ultimately, he just looks much more generic. Not enough that I think the intent was for him to initially be a generic guy, but enough that he’s not immediately recognizable as Piett.  The paint work is pretty standard, matching up with the other Imperial Officers from the line, and generally being pretty cleanly applied.  Piett is packed with the same small blaster as Tarkin and Motti, as well as a baton (for all that baton stuff he does), and a Freeze Frame of Piett on the Executor…from when he’s an Admiral...

THE ME HALF OF THE EQUATION

Piett’s a character I always had a little bit of a soft spot for, since it’s hard not to feel bad for the guy the way he winds up in his position.  I mean, he’s still a bad guy, like, through and through, but still.  Despite that, however, I never actually had this guy as a kid, nor did any of my cousins.  It’s probably because he’s not a super distinctive figure, I guess.  He’s not bad, mind you, and actually works pretty well as a rank and file Imperial.  So, if you want maybe a few of him, that’s maybe not the worst thing.

#2792: Ishi Tib

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ISHI TIB

STAR WARS: POWER OF THE FORCE II (KENNER)

“The Ishi Tib characters come from the planet Tibrin, where they live in the cities built atop coral reefs. Ardent freedom lovers, several Ishi Tibs offered their talents in service to the Rebel Alliance.”

Ah, good, the bio pretty much answers any questions I had.  Well, that sure is convenient.  That’ll do, bio.  That’ll do.  Now, when you look at a character like this, a wonky looking alien, if you will, from the Star Wars universe, most assumptions go to it being from one of two places.  Either it’s a patron of the Mos Eisly Cantina, or one of the hangers on from Jabba’s palace.  This one is, shockingly, from neither of those.  Nope, this one’s instead from the Rebel briefing from Return of the Jedi, which looked to amend the overly human representation of the first two films by adding an assortment of its own wonky looking aliens.  And boom, here’s the Ishi Tib, who are, in fact, a race, and not just one guy.  Obviously.  Ishi Tib’s clearly not a name, you guys.  Why would you think that?

THE FIGURE ITSELF

The Ishi Tib was added to Kenner’s Power of the Force line in 1998.  It was a good year for characters from Jedi‘s Rebel briefing, so the Tibs fit in well with that.  The figure is just shy of 4 inches tall and has 6 points of articulation.  The movement on this figure is somewhat restricted by its design, with the head’s shape limiting what can be done with the neck joint, and the robe piece limiting the arms and legs.  The robe is designed so that it could be removed in theory, I suppose, with slits up the side, and a fully detailed sculpt beneath it.  However, the shaping of the head kind of keeps it stuck in place, unless you want to risk mutilating it.  It’s honestly a pretty nice sculpt, overall, though.  The head in particular holds up, and feels on par with more recent offerings.  I suppose it could use some extra texturing, but ultimately I think all the necessary details are covered.  The paint work on the figure is subtle, but well handled.  The base work is all cleanly applied, and there’s even some slight accenting on the head, which is pretty cool.  The Ishi Tib is packed with a somewhat goofy looking blaster rifle, as well as a Freeze Frame showing a shot of the Rebels all being briefed.  I don’t believe any of the Ishi Tib are actually visible in the shot, but it’s admittedly hard to tell.

THE ME HALF OF THE EQUATION

I wasn’t really familiar with the Ishi Tib prior to acquiring this figure.  I mean, I knew the general design of them, and all, but I certainly wouldn’t have guessed this wasn’t just one guy named Ishi Tib prior to reading the figure’s bio.  This one is one I wound up grabbing during one of my big PotF pushes, in the fall of 2018, alongside a whole bunch of other figures.  I mostly grabbed this one at the time because I liked the more unique alien look.  It’s admittedly pretty cool, so I can get behind it.  It’s just a nice, fun figure.

#2783: Rey – Dark Side Vision

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

REY — DARK SIDE VISION

STAR WARS: THE BLACK SERIES (HASBRO)

“While searching for the Sith wayfinder, Rey envisions her turn to the dark side. Wielding a double-bladed Lightsaber, her rage and immense power is frightening.”

While I enjoyed the film a lot more than other people, I’m willing to admit that Rise of Skywalker is a film that has a lot of half-formed, unfinished, and unexplored ideas jammed into it.  Though featured in the trailers and taunted as a major turning point, the Dark Side-influenced version of Rey wound up as essentially just an easter egg, with no real plot-bearing, and effectively nothing that wasn’t already in the trailer, apart from the context of it just being a vision, and not a legitimate fall for Rey.  While I wasn’t as married to the dark Rey idea as some people, I’ll admit the concept could have at least gotten some more screen time, even if it were still as a vision of a potential future.  But, hey, it got a figure.  That’s cool, right?

THE FIGURE ITSELF

Dark Side Vision Rey is part of Phase IV of Star Wars: The Black Series, and was included in the line’s third assortment, alongside the three Mandalorian-inspired figures I looked at earlier in the week.  She’s figure 01 in the Rise sub-set of the line, which is, so far, made up only of this figure.  Sure, we can get a second Rey, but a proper Rise version of Poe?  That’s just too much to ask for, right?  Totally ridiculous! …Okay, sorry, I’m not bitter or anything.  I promise.  The figure stands just shy of 6 inches tall and she has 28 points of articulation…in theory.  Unfortunately, most of the figure’s leg articulation ends up more or less useless, due to the nature of how the figure’s skirt piece is designed.  For some reason, they opted to go for a more solid rubber construction for that piece, while using a cloth piece for her cape.  Why? Not a clue.  Personally, I’d have probably swapped those two.  But I’m not a toy designer, so maybe there are factors I’m not privy to.  Dark Rey’s sculpt is generally okay, but not really anything amazing.  The head’s got a strong Daisy Ridley likeness, and might be a re-use of the standard Rise version, but it’s hard to tell.  It’s good piece regardless.  The hood that sits on top of it’s not so great.  I mean, I guess the hood itself isn’t awful.  The shaping and the texturing are certainly nice.  However, much like the Rise Kylo, the hood floats above the head, which looks goofy.  It’s not as bad as Kylo, mind you, and changing the posing on her head can help, but generally it would look much better if it sat just a touch lower.  The rest of the sculpt isn’t bad.  Her proportions match with the standard Rey, and the texturing on the robes is consistent with the strong work on the hood.  Rey’s paint isn’t very involved, since it’s mostly just black plastic here.  The face printing does a nice job with the shadows on the eyes, so that’s cool.  The hair line’s not so great on my figure, but it’s at least harder to see that due to the hood.  Dark Rey’s only accessory is at least a good one: she gets the distinctive hinged double-bladed saber from the sequence.  It’s an odd piece, and she never really looks natural holding it, because the whole design is kind of awkward.  However, it’s certainly unique, and it’s about the only thing I can think of that it would make sense to give her, so kudos to Hasbro there.

THE ME HALF OF THE EQUATION

Rise has been the red-headed stepchild of the franchise when it comes to toys, so I’m always happy to see at least something more coming out of the movie, but I’d be lying a bit if I said I wasn’t disappointed with this being the first thing from the movie to be included in the Phase IV line-up.  It’s made even worse by the total lack of follow-up to her at this point.  Whatever the case, I guess it’s not really this figure’s fault that it’s not a different character, so it’s a little unfair to judge it by those standards.  On it’s own merits, it’s alright.  Not amazing or anything, but it could be worse.  Hopefully, she’ll be joined by some more figures from the movie, so that Rey and Rey aren’t the center piece of the display.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2782: Moff Gideon

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MOFF GIDEON

STAR WARS: THE BLACK SERIES (HASBRO)

“Imperial Moff Gideon is fiercely determined to capture a specific quarry. Clever and formidable, Gideon values power and knowledge.”

Werner Hertzog’s un-named and mysterious “Client” serves as the main underlying antagonist of The Mandalorian‘s first season, but is dispatched in a rather spectacular fashion just before the season finale by the character who becomes the main antagonist moving forward, Giancarlo Esposito’s Moff Gideon.  Esposito does a pretty great job of playing a compelling villain, and he’s definitely been at the top of people’s want lists for the toys since the end of the first season.  Fortunately, Hasbro’s gotten around to delivering on that front, giving us a Gideon in each of their three styles, in rather close succession.  Today, I’m looking at his Black Series offering.

THE FIGURE ITSELF

Moff Gideon is part of the Mandalorian sub-set of Black Series‘ Phase IV incarnation, where he’s figure 08.  He’s the last of the Mando figures in the third assortment since the relaunch.  Gideon is presented here in his custom Imperial attire, which has thus far been the only look he’s had.  The figure stands 5 3/4 inches tall and he has 27 points of articulation.  So, here’s my thing on this figure: he’s too tiny.  Like, not just too short, but actually too tiny.  Esposito isn’t the tallest guy, but his costume for Gideon has him wearing lifts, which the figure’s design includes.  It seems to me that somewhere along the line, the used Esposito’s listed height as the basis for the figure, not factoring in the costume design, and ultimately resulting in him just being actually too small all around.  It’s not super noticeable with a helmeted character like Mando, fortunately, but next to Kuiil and Karga, who he’s in the same assortment with, mind you, he looks a little bit like he’s supposed to be from a different line.  These size issues are most annoying for one major reason: the sculpt’s otherwise really good.  The likeness on the face is strong, the expression’s perfect for the character, and the detailing on his uniform is sharply handled.  It all looks really good.  They’ve even done well getting the cape to hang convincingly.  All in all, just a really nicely rendered sculpt.  Gideon’s paint work is nicely handled as well.  The printing on the face is nice and lifelike, and the variations in the various blacks of his uniform.  The red accenting is appropriately eye-catching, and the smaller details on his chest armor are cleanly applied.  Gideon is packed with two accessories: a small blaster and the Dark Saber.  The blaster’s standard, and can be kept in his holster.  The Dark Saber’s a great piece, and a large plot point in the show, making it a great extra.  Ultimately, I still think he feels a little light, but he’s in a better spot than the others so far.

THE ME HALF OF THE EQUATION

Moff Gideon’s certainly a memorable, and definitely important character for the show, so I was definitely down for adding him to my collection.  He’s not a bad figure.  Honestly, he’s a pretty darn good figure.  But he’s also too small, and that just kinda bugs me.  I guess I’ll just stick him next to IG-11 all the time, so that it’s not so noticeable?

Thanks to my sponsors at All Time Toys for setting me up with this guy for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2781: Kuiil

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

KUIIL

STAR WARS: THE BLACK SERIES (HASBRO)

“Kuiil came to seek peace in an out-of-the way world. He has worked a lifetime to be free of servitude and offers valuable skills for those willing to meet his price.”

One of the things The Mandalorian has excelled at is taking pieces of Star Wars left kind of unexplored (in mainstream media, anyway) and actually putting a decent amount of time and energy into making audiences care about those things.  Take, for instance, the Ugnaughts, the race of small, pig-faced, troll-men, who served as background filler for the Bespin scenes in Empire.  Did anyone really care about them?  Really?  Then The Mandalorian comes along and gives us Kuiil, and all of the sudden we’re sad when an Ugnaugh dies.  Feelings about Ugnaughts?  That doesn’t seem right.  Damn you, Nick Nolte-naught and your lovable speech quirks!

THE FIGURE ITSELF

Kuiil is a Phase IV Black Series release, as figure 07 in the Mandalorian sub-set of the line.  He’s part of the third assortment of this phase, alongside yesterday’s Greef Karga figure.  He too is based on his Season 1 appearance, because he kind of has to be, doesn’t he?  The figure stands about 4 1/2 inches tall and he has 27 points of articulation.  Despite his slightly smaller stature, Kuiil is still more or less on par with most Black Series releases in terms of posability.  About the only area I might say could use some improvement is the elbows, which are a little restricted, thanks to how the sculpt works out.  Thry aren’t terrible, just not quite up to the latest standards, especially given the recent trooper updates.  Kuiil’s sculpt is generally a rather impressive one, and certainly a benefit of him not getting a figure for over a year past his original debut.  By far the most impressive part of the sculpt is the head, which is just the spitting image of his in-show design, and also features a impressively designed and scaled aviator’s cap and goggles.  I honestly wasn’t expecting them to be removable at first glance, but I was very pleasantly surprised to find out they were.  The rest of the sculpt does a quite nice job of capturing Kuiil’s attire from the show, varying up the textures for the various different pieces of clothing, and adding some nice depth to the sculpt where possible.  Kuiil’s paint work is, for the most part, pretty basic.  The head again gets the best work, with the face printing working well with the sculpted elements to really nail that likeness to the prosthetics.  The rest of him is really on the straight forward side, with just solid colors.  I do feel he might benefit from some more accenting, to really sell that used universe look, but at least the sculpt does its part to keep things going.  Kuiil’s only accessory is his rifle.  It’s a nicely detailed piece, which fits well in his hands, but, like Greef, it winds up feeling pretty light for the price.  I might have liked to get maybe some of his tools, or even a tea set to go along with our IG-11 figure.  Just something extra to sweeten the pot a little bit.  But, again, he does at least get bare minimum.

THE ME HALF OF THE EQUATION

I’ve pretty much been wanting a Kuiil figure since episode 1 of the show (before I even knew his name, mind you), because I really dug the character.  I had been sort of crossing my fingers for maybe a deluxe release packed in with a Blerg, but getting him on his own isn’t so bad either.  Lack of extras aside, there’s a lot I like about this figure, and at his core he’s just really solidly done.  He’s honestly my favorite figure from this assortment.  I have spoken.

Thanks to my sponsors at All Time Toys for setting me up with this guy for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2780: Greef Karga

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GREEF KARGA

STAR WARS: THE BLACK SERIES (HASBRO)

“As an agent of the Bounty Hunters Guild, Greef Karga secures bounty hunters in pursuit of valuable and rare quarries in the galaxy.”

Carl Weathers’ Greef Karga begins The Mandalorian as a rather unassuming sort of character, just a guy that hands out the jobs to the bounty hunters.  He’s clearly a bit disreputable, but he doesn’t seem overly complex.  When Mando turns on him later in the season, he does the rather expected thing, and turns right back.  However, his return after that is what really changes things up, taking him from sci-fi middle-management to a character that’s actually got a pretty good hold on how to spin things to his advantage as they happen.  He becomes a man with a grasp on the bigger picture, and suddenly he’s very intriguing, and a definite highlight of the show.  It’s only fair that he get a Black Series release out of it.

THE FIGURE ITSELF

Greef Karga is part of Phase IV of The Black Series, a piece of the Mandalorian sub-set of the line, where he’s figure 06.  He’s part of the third post-relaunch assortment, which is generally pretty Mandalorian heavy in its character selection.  Greef is based on his Season 1 appearance (in contrast to the Season 2 appearance of his Vintage Collection and Retro Collection figures), which fits with most of the Mando stuff we’ve gotten so far.  The figure stands 6 1/4 inches tall and he has 29 points of articulation.  Karga isn’t quite as agile as some of the line’s more recent releases, but he’s still got plenty of movement to him, and it’s certainly enough to cover the way the character is portrayed in the show.  His sculpt is an all-new piece of work, and it’s a pretty respectable one at that.  The head’s got a pretty solid likeness of Weathers from the first season, and his outfit does a respectable job of capturing the texturing and detailing on the various pieces of his outfit.  The coat/cape is a separate piece; it’s not designed to be removable, but can be with a little work if you are so inclined.  I wasn’t, personally.  Greef’s paint work is pretty heavy on the browns, as is appropriate for the character.  It matches pretty decently with what we see on screen, and the printing on the face is appropriately life-like.  Greef is packed with his two blaster pistols, which can be stowed in his holsters.  They’re nice pieces, but he does wind up feeling a little bit on the light side.  Maybe throwing in a few of the pucks, or even a piece of Beskar would have helped to alleviate it somewhat.  He’s got the basics, but that’s really it.

THE ME HALF OF THE EQUATION

I was surprised by how much I liked Greef in the first season of the show, as I think a lot of people were.  I was definitely down for some toy treatment, and was pleased when he was shown off for the line.  He’s the sort of figure that doesn’t quite have the fancy flair of the other characters from the show, so I think he may wind up getting overlooked by a lot of collectors, but I see him definitely picking up in the long run.  It helps that he’s honestly a pretty solid figure, and a nice addition to the cast.

Thanks to my sponsors at All Time Toys for setting me up with this guy for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2779: Boba Fett

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BOBA FETT

STAR WARS: THE BLACK SERIES (HASBRO)

“During Luke Skywalker’s daring rescue of Han Solo above the Sarlacc, Boba Fett was sent careening into the side of Jabba’s sail barge before tumbling into the man-eating pit.”

Oh, man, Ethan’s reviewing a Boba Fett figure.  There’s always bound to be trouble with these posts.  Probably because I do like occasionally poking the bear that is Boba Fett fans.  I mean, it’s just so much fun.  Almost as much fun as making fun of Boba Fett, and how ineffective he is.  Okay, I actually have to retract that: Boba Fett is no longer useless, because after 40 years of existence, Boba finally got stuff the do in The Mandalorian last year.  And good for him.  I’m sure his fans are all universally happy about him actually getting to be a bad-ass, right on the screen and everything.  Oh?  They’re still conflicted and angry?  Sounds about right, I guess.  Well, whatever the case, I’m looking at another Boba Fett figure, and I feel like I should just get down to business on it.

THE FIGURE ITSELF

Boba Fett is a deluxe-sized offering, as part of Phase IV of Hasbro’s Black Series.  After seven years of re-releases of the Series 2 figure’s Empire-based sculpt, we have officially moved on, and are now, finally, getting Fett based on his adjusted appearance from Return of the Jedi.  I’m okay with this, because I actually kind of like the Jedi armor a little bit more than the Empire look.  The figure stands about 6 inches tall and he has 30 points of articulation.  One of the biggest change-ups between this figure and the last (beyond just the differing source material, of course) is how the articulation works.  Hasbro’s gotten a fair bit better at implementing the articulation on their Black Series offerings, and Boba showcases this, in much the same way as the recent updated troopers we’ve gotten.  His range of motion on his elbows, knees, and neck is much improved, while also being better worked into the sculpt aesthetically.  Additionally, there have been some adjustments made to how some of the armor and hook ups work, so, for instance, his arm tubes are now far less at risk for breakage from regular posing.  Lastly, he also addresses the one notably missing joint from the last release: the range finder.  It can now be adjusted for proper use the way he never really does in the movies, but you always wished he would.  In terms of actual sculpt quality, this release is pretty top-notch.  Like the recent Troopers, his helmet is a separate piece, placed atop an actual sculpted head under neath.  Said head is unpainted, but fully detailed.  Likely future-proofing for the inevitable Mandalorian variant of the character.  The helmet came out of the box looking a touch misshapen, but after a few days, it’s taken its proper shape all on its own.  The torso armor is also a separately sculpted element, distinct from the underlying torso, again likely as part of a plan to re-use elsewhere.  This also helps to give Boba a little more depth to the detailing on the sculpt, which works in his favor.  While the last Boba had a cloth half-cape thing, this one’s got a sculpted done.  It’s a little stubborn, but does wind up looking a little bit better, at least comparing my two figures.  Boba’s paint work is up to modern Black Series standards, which is to say a bit better than the original.  The work on the silver weathering looks well-lived-in, and his small little insignias also look nice and crisp.  In order to justify him being a deluxe, Boba has been given a decent helping of accessories.  He gets his rocket-pack, now with a removable top-rocket, as well as articulated thrusters on the bottom.  He also gets two versions of his blaster rifle, standard, and split from after Luke slashes it with his lightsaber, as well as a flamethrower effect piece, two thrust effects for his rocket pack,  and a clip-on grapple line.  Ultimately, the grapple piece is a little goofy, and is limited in its application, but the rest of the parts are all definitely fun extras, and help to make him feel more worth the heftier price point.  It gets more back to Black Series’s original one-and-done philosophy on these designs.

THE ME HALF OF THE EQUATION

Joking about the character aside, I do like me a good Boba Fett toy, and as much as I like the original Black Series release of the character, I definitely was starting to see the sculpt’s flaws more and more, especially as other main characters got properly updated releases as the line progressed.  Fortunately, we had this secondary design in the pocket, making him an easy addition to the line.  I definitely liked how this one looked in the renders, and was eager to get it in hand.  My initial reaction was a little bit let-down, but after I opened him up and actually started messing around with him, I really found myself liking the figure.  Definitely Hasbro’s best take on the character, and I look forward to seeing them tackle his Mandalorian look.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2769: R5-D4

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

R5-D4

STAR WARS: THE BLACK SERIES (HASBRO)

“A red astromech droid, R5-D4 thought he’d found a home when the Jawas sold him to Owen Lars, along with the protocol droid C-3PO. But R5’s motivator blew as he rolled away from the sandcrawler, forcing the Jawas to take him back in exchange for R2-D2.”

The Mandalorian has had a number of returning characters from elsewhere in the Star Wars mythos, some big returns, and some rather small.  On the small side was a character that’s easy to miss in both of his on-screen appearances.  A little less so in A New Hope, where R5-D4 is notably the astromech whose head blows up, prompting Owen and Luke to buy R2 instead, but it’s not like he gets name dropped there, or anything.  His reappearance in The Mandalorian almost feels like it could just be a similarly designed droid, until we see the back of him, revealing a small scorch mark where his motivator would have blown all those years prior.  It’s a nice little touch, and a welcome return for a character most people don’t even know exists.  As another astromech, R5 is prone to getting toys, since he can frequently make use of R2 parts.  That was the case for today’s offering, which is the Black Series version of the character.

THE FIGURE ITSELF

R5-D4 was released in 2017, as part of the vintage-carded-styled A New Hope 40th Anniversary sub-set of Black Series figures.  R5 was a GameStop exclusive, but was also available through Think Geek, due to their partnership at the time.  It so far marks his only time getting a Black Series release.  The figure’s just over 4 inches tall and he has 10 points of articulation.  His movement set-up is the same as R2’s, which tracks, since he’s largely the same collection of pieces as R2.  Like I said, frequently makes use of R2 parts.  It’s film accurate, so it’s not like it’s a bad idea or anything.  The notable change-up here is on the head, which swaps out R2’s dome for the more cylindrical set-up that R5 had going on.  It melds well with the pre-existing parts, and is generally a pretty nice piece in its own right.  R5’s paint work was notably a bit better than the basic R2 we had at this point, since in addition to getting a pretty solid selection of base color work, he also got a little bit of accenting on the white sections of the body in order to make him look a little grimy from being on Tatooine all those years.  It’s actually pretty minor, and a very good sample of work from Hasbro, especially for this era.  The weirdest part is the one stripe of reflective coloring on the head, which is actually a decal.  I’m not sure why, but it doesn’t look bad, and it’s in a spot where it being a decal’s not going to be quite as detrimental.  Unlike the first two releases of R2, which had a ton of accessories, R5 is barebones, with nothing beyond just himself in the package.  It definitely feels light, but then again, I have no clue what exactly you would give R5.  The ’90s opted for missiles, but that’s out of place these days, I suppose.  What a shame.

THE ME HALF OF THE EQUATION

R5 is a figure I came very close to buying new.  I saw him at the Think Geek in a mall in Seattle in the summer of 2017, and thought very seriously about buying him, since I’ve always liked him and all, but money was tight at the time, and I had already bought other stuff that day, so I wound up passing.  I never saw him again, and always kicked myself for not picking him up.  So, when this guy came into All Time a few months back, I jumped at the chance to get him, especially after his return appearance on The Mandalorian.  He’s not a figure that does a ton new, I suppose, but that’s just generally R5.  He’s still pretty darn nifty, and a little bit more unique than just another R2.  He’s a real sleeper figure for me.  You don’t expect to be all that impressed by him, but he’ll catch you off guard, in a rather subtle sort of way.

Thanks to my sponsors at All Time Toys for setting me up with this guy for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.