Tag Archives: Superman

#0603: Lex Luthor

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LEX LUTHOR

SUPERMAN: THE ANIMATED SERIES (KENNER)

LuthorSTAS1

Batman: The Animated Series is pretty much universally viewed as one of the best interpretations of Batman and his supporting cast ever. It was revolutionary at the time it was released, and, thanks to top notch writing, animating, and acting, it still holds up pretty great after over 20 years. For me, though, the best entry in the DC Animated Universe is the series that followed B:TAS, Superman: The Animated Series. While B:TAS got a pretty decent run of figures at the time of its release, S:TAS wasn’t quite so fortunate. Kenner produced a line of toys to tie-in, but the character selection was somewhat limited, and many of the characters were rather off-model. One of the characters hit the hardest by off-model-ness was Big Blue’s arch enemy Lex Luthor, who is the focus of today’s entry.

THE FIGURE ITSELF

LuthorSTAS2Lex Luthor was released as part of the first series of Kenner’s Superman: The Animated Series tie-in line. He was one of the two non-Superman characters in this particular series. The figure is a little over 5 inches tall and has 6 points of articulation. Dig that waist articulation guys! It’s more than most DC figures had at this point! Now, this figure is sort of based on Luthor’s animated appearance, but, as I noted in the intro, the figure is more than a little bit off-model. To Kenner’s credit, they managed to produce a near-perfect rendition of the animated Luthor’s noggin. It’s really a very good piece. The trouble lies with literally every other piece of the figure. Rather than release him in his signature suit, Luthor is depicted here in a Kryptonite armor suit, which is completely made up for this figure. The “Kryptonite” parts are all snap-on armor pieces, which can be removed to reveal….some sort of exoskeleton thing. It’s a perfectly fine sculpt on a purely technical level, but it looks pretty wonky and the body doesn’t even have proper Bruce Timm-style proportions. I get that a guy in a suit doesn’t make for the most exciting figure. That said, if they were going to do the clip on armor thing, why not put a more conventional suit under the armor? Just seems like a weird choice. Also, the figure seems to have borrowed Total Justice’s guide to posing; his arms and legs are all bent and turned. It’s most annoying on the legs because it makes getting him to stand next to impossible. As far as paint goes, Luthor is pretty reasonably handled. Nothing super thrilling, but everything is applied pretty cleanly. It’s a nice touch that he veers away from the primary colors, helping set him apart from Superman. In addition to the clip on armor, Luthor includes a big freaking missile launcher thing. Hasbro would be so proud.

THE ME HALF OF THE EQUATION

I never had this figure growing up. I saw him many times over the years, but I just never got one. It’s most certainly due to the weird design of the figure. Why now? Simple, my comicbook store had a table of action figures for $2.99. If you bought five, they were only $2 apiece. So, I bought ten. Luthor was one of them. This actually isn’t a bad figure, just kind of weird.LuthorSTAS3

#0402: Cyborg Superman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CYBORG SUPERMAN

SUPERMAN (DC DIRECT)

In the early days of DC Direct figures, Hasbro’s contract for the license prevented DCD from making figures of any characters related to Batman and Superman. Following the transfer of the license to Mattel, DCD was allowed to release those characters to their heart’s content. So, they released a line of figures for each of them. The Batman figures skewed more classic, while the Superman figures took a more modern flare. Today, I’ll be looking at that line’s version of Cyborg Superman, another character with “Superman” in his name who is not actually the man of steel.

THE FIGURE ITSELF

Cyborg Superman was released in Series 2 of DC Direct’s Superman line. The figure is about 6 ½ inches tall and he sports 17 points of articulation, which was quite a thing for a DCD figure to have at this point in time. With a character like this, there’s bound to be some parts overlap between this figure and the basic Superman. In reality, he doesn’t share as much as you might expect. His entire left arm, his left thigh, his right foot, and his cape are the same. The rest is unique to this figure, though some parts are tweaked parts from the base Superman. I should point out at this time that my figure’s lower jaw went missing at some point, and I replaced it with a somewhat crudely sculpted replacement. So, the real figure’s jaw was much nicer. However, this figure’s price has since skyrocketed, so I won’t be getting a proper replacement anytime soon. The figure’s sculpt was very, very well done. The proportions are great, and the robotic pieces look fantastic. One of the coolest things about the sculpt is the organic quarter of his face, which is similar to the full sculpt of the main Superman, but just different enough to let you know this isn’t the same guy. It’s really good work. The figure’s paint, while not anything outstanding, is pretty solid. The colors are nice and vibrant, and everything is nice and cleanly applied. Cyborg Superman included a S-emblem display stand.

THE ME HALF OF THE EQUATION

I got Cyborg Superman when he was relatively new, from a comicbook store nearby the house we had just moved my aunt into. I had missed out on the regular version of Superman, so I “settled” for this figure. While there are plenty of Supermen that have surpassed the version offered in Series 1, none of the Cyborg Supermen have come close to this one, so I’d say I got the better end of the deal. I just wish I hadn’t lost that jaw…

#0401: Composite Superman

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

COMPOSITE SUPERMAN

FIRST APPEARENCE

In the 50s and 60s, DC Comics was really king of the absurd idea. Their stories pretty much run on absurdity. When it comes to absurd characters, Composite Superman is definitely up there. Right off the bat, he’s a dude who’s half Superman ad half Batman. But, what’s even wackier is that his origin has nothing to do with Superman or Batman. He’s actually a janitor from the future, granted the powers of all of the members of the Legion of Super Heroes when lightning struck a display of figurines possessing their abilities. So, umm… yeah. On the plus side, the fact that he’s half and half of two of DC’s top characters means he’s gotten not one, but two action figures!

THE FIGURE ITSELF

Composite Superman was released in Series 3 of DC Direct’s First Appearance line. The first two series were purely golden age characters, but the diversified a bit starting with Series 3. This is the first of the two Composite Superman figures. The figure is about 6 ½ inches tall and he has 11 points of articulation. In case the name of the line didn’t clue you in, he’s based on the character’s first appearance, drawn by the legendary Curt Swan. Simply put, the sculpt is outstanding. It’s head to toe a perfect recreation of Swan’s art. The two halves are distinct to each character, but still totally in synch with each other. The only downside to this figure is that DC Direct never separated the sculpt out into proper Swan versions of Superman and Batman (though they did release a completely unique Superman sculpt of a similar style in their Showcase line). The paint is fairly straightforward, but that’s not a bad thing. The colors are all nice, bold and distinct, emphasizing the differences between the halves. The boots and glove have also been done in a very nice glossy sheen, which adds a nice amount of depth to the look. Composite Superman included a mini-replica of his first appearance and a gold display stand.

THE ME HALF OF THE EQUATION

The Composite Superman, like so many of my DC Direct figures, was gotten from a friend who works for Diamond Distributors. I’ve always loved the look of the character, and I was thrilled to find out he was getting an action figure. To top that, it’s not just any action figure, it’s a phenomenal action figure. This really was one of DC Direct’s best efforts.

#0337: Superman

Posted by Ethan Wilson in Reviews and tagged with , , ,

SUPERMAN

DC COMICS MULTIVERSE

ReeveSuperman1

In 1979, Superman started a trend of superhero movies that has continued for over 30 years. There had been superhero movies before, such as the 60s Batman: The Movie, but Superman is important because it treated the source material seriously, while simultaneously making winks at the audience about some of the stranger aspects. It knew what it was. It may not be for everyone, but it’s the prototypical superhero movie without a doubt. Because of this, it’s remained one of my favorites. Until the recent round of Marvel Studios movies, it was my go to example of what a superhero movie should be. One of the movie’s greatest strengths was the casting of Christopher Reeve in the title role. He played both sides of the character with a lovability and sense of heroism that his performance serves as many people’s ideal Superman even to this day. In the late 70s, movies didn’t get toylines like they do today, leaving collectors lacking in a Christopher Reeve Superman for three decades. A few years back, Hot Toys released their own take on the character that was phenomenal, but the smaller scale was lacking a bit. With the announcement of their DC Comics Multiverse line, Mattel confirmed a Christopher Reeve Superman. Yes, I know, it’s Mattel. This is about the point where I warn you it’s gonna be rough. Well, this figure’s actually a bit of a surprise.

THE FIGURE ITSELF

ReeveSupermanWilsonSuperman was released in the third assortment of Mattel’s DC Comics Multiverse line. For those of you keeping track, yes that does put him an assortment later than the previously reviewed General Zod figure. I’m not sure what Mattel was trying for there, but it resulted in peg-warming Zod’s everywhere. Sound move, guys. Obviously, this figure is based on Christopher Reeve’s portrayal of the character. If you want to be specific, he’s based on Superman in the first movie, but there really wasn’t much change from film to film. The figure is a little over 3 ¾ inches tall and features 18 points of articulation. The articulation here is better handled than it was on Zod, though they have removed the bicep swivels in exchange for thigh swivels. He also gained a waist swivel that Zod was so sorely lacking. Superman is still a bit stiff looking, and he could really use some ankle movement, but he really isn’t bad. If Zod’s waist was too high, I’m gonna go ahead and say Superman’s waist seems to be too low. It’s not as bad, but it does seem a slight bit off. Aside from that, the sculpt is pretty great. The proportions seem pretty on mark, and the head bears a pretty decent likeness to Reeve, especially at this scale. Superman’s paint isn’t terrible, but I had to look through several figures to find one that didn’t have any immediately noticeable issues. I still didn’t find a perfect figure, as removing him from the package revealed a sizeable portion of missing paint of the logo on the cape. Other than that issue, the paint is pretty good, though there are few areas with some bleed over. Superman includes no accessories, which is really a shame, given the cost of the figure. It would have been cool to get the chunk of Kryptonite Luthor hangs on his neck, or something. Anything would be good.

ReeveSuperman3 ReeveSuperman2

THE ME HALF OF THE EQUATION

I picked up Superman from a boardwalk shop in Ocean City while I was there celebrating my friend Jill’s birthday. Surprisingly, I really like the figure. It’s not perfect, but it’s better than a lot of Mattel’s output these days. It’s a shame that Zod wasn’t quite as good, but the true tragedy is that many people will probably end up passing on Superman based on the lackluster Zod, thanks to Mattel’s odd release order.

#0289: General Zod

Posted by Ethan Wilson in Reviews and tagged with , , , ,

GENERAL ZOD

DC COMICS MULTIVERSE (MATTEL)

Zod1

The Birthday Reviews continue. We’re at Part 9, and we’re drawing quite close to the end. Today, I’m looking at a figure from one of Mattel’s recent DC lines, DC Multiverse. Frequent readers of the blog will have just cringed, cuz yeah, it’s a Mattel review. Be prepared. Anyway, Multiverse is Mattel’s new line of 3 ¾ inch DC figures, based on various movies and video games over the years. The most recent assortments have been focusing on the 70s-80s incarnations of Batman and Superman, and I’ll be taking a look at one of Superman’s nemeses, General Zod. KNEEL BEFORE ZOD!!!!! …..Sorry, the figure makes me do that sometimes…

THE FIGURE ITSELF

Zod2General Zod was released as part of the second assortment of Mattel’s DC Comics Multiverse line. He’s based on the version of the character as portrayed by Terrance Stamp in the first two Christopher Reeve Superman movies. He stands about 3 ¾ inches tall and features 17 points of articulation. It might seem like a decent count, but he’s lacking basics, such as thigh and waist swivels, or any kind of ankle articulation. This results I n the figure being rather stiff looking. The slightly odd posture and proportions of the sculpt don’t really help the stiff-ness. The legs are a bit too long, and definitely too thin, and his waist seems like it seems too high up. The head isn’t terrible. It does bear a passing resemblance to Terrance Stamp, though he’s kind of a bit generic. His face seems to be a little chubbier than Stamp, but it’s not bad for the scale. The paint on Zod is okay, but not amazing. The uniform is fine, and they’ve done a nice job differentiating between the sheen on the materials, so there’s that. The face paint isn’t the greatest. The beard is the worst; it looks a bit like it’s been drawn on his face. The eyes and eyebrows are pretty good work, and the hair is cleanly painted at the very least. He would certainly benefit from a few streaks of gray in his hair, though. Zod includes one accessory: the machine gun he destroys shortly after arriving on earth in Superman II.

THE ME HALF OF THE EQUATION

Zod was one of the gifts I received for my birthday this year, given to me by my parents. It was actually a slightly late addition to the Birthday haul, as my dad forgot he had gotten it for me. It’s not a terrible figure, and I feel certain I’ll like it a bit more once I have the accompanying Superman. That being said, he is a slightly disappointing figure, especially for the price and compared to what others have done with this scale. Most wounding is the fact that Mattel seems determined to stay behind the industry standards, moving to the 3 ¾ inch scale just as it’s been largely abandoned, even by Hasbro, king of 3 ¾ inch. Still, I guess if you’re a fan of this version of Zod (and who isn’t?) you could do worse than this figure.

ZodWilson

#0207: Supergirl & Bizarro

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SUPERGIRL & BIZARRO

DC MINIMATES

Bizarro&Supergirl

Goodbye! Today, me no am reviewing figures from my least favorite toyline ever, Minimates. Me no am happy to be reviewing Minimates. They am terrible! Figures today not come from DC Minimates, a line which had too many series. Figures am two minor characters from DC’s least popular comic, Superman.

THE FIGURES NO AM THEMSELVES

Figures no am from 6th series of DC Minimates. They no am from near end of line.

PRETTY LADY S GIRL

Supergirl no am Superman’s cousin. She am very old lady, who am left on Argo, capital city of Krypton, which am destroyed before Krypton exploded. Supergirl am very tall figure, not based on normal Minimate body. She no features 14 points of articulation and am 2 ½ inches short. Supergirl have three old pieces. They no am right for the character. They am too skinny. Pieces am sculpted very rigid. Paint am okay. This am very bad. There am no interesting details. Supergirl’s face am very calm, and am same as others. Supergirl am well accessorized with nothing.

ME AM BIZARRO

Bizarro am original Superman. He am greatest hero ever and am great friend of Superman. He am not based on classic Bizarro, which am terrible! Bizarro am no based on minimate body, and no have normal features. Bizarro no have three sculpted pieces: hair, cape, and belt. Cape and belt brand new pieces and hair am re-use. Pieces no am good for figure. Am terrible representation of character. Bizzaro’s paint am no good. This am very bad. Slop am everywhere. Bizarro’s face am no detailed very well. He am very sad looking. Me Bizarro am include “Bizarro #1” necklace, which other Bizarro’s no am included. Me am happy about this.

ME AM THREE HALVES OF THE EQUATION

Ethan sell Bizarro and Pretty Lady S Girl from distant comicbook store, Cosmic Comix. Me no get them when they am unreleased. Me no am like them. They am terrible figures of characters. They am no important characters to Superman.

 

Confused?  This post was written in Bizarro speak.  If you’d like a translation, click here.

Guest Review #0003: Supergirl & Bizarro

Posted by Ethan Wilson in Guest Reviews and tagged with , , , , , ,

The  following is a guest review written by my brother, Christian Wilson.  Enjoy.

SUPERGIRL & BIZARRO

DC MINIMATES

Bizarro&Supergirl

Ahoy! This is life. Sometimes you don’t know where you’re going but you know where you’ve been. And that’s all that love’s about. But love is not about the Bizarro & Supergirl Minimate Tupac from probably the 6rd of 8 series of DC Minimates (Because why wait any longer!?). The rippling abs and pectorals before will be put to action immediately. Get ready for the BOON!

THE FIGURES THEMSELVES

These figures are like midgardians. Weak and tiny! As they both originate from Superman Descent (Yeah, that’s a thing I made up with mah brain powers), they both sport some Supes logos. These characters are like the stuff you’ve seen before only more backwards.

SUPERGIRL

I wouldn’t have put her first, she’s just boring, but cool at the same time! Supergirl sports a lady skirt, and some differently sculpted hair. Along with the cape, much work was clearly put into to this thing(if you will). There’s more than 6 articulation points and this makes Supergirl undesirabley angry for some reason. Just look at that face! If you would like to learn more about this robust lady of the lake, look her up on Wikipedia cuz I ain’t gonna draw her.

BIZARRO

This figure am horrible! That was bizarre speak for this figure’s is awesome! The character is captured well in his classic uniform and not some Smallville CW sh*t like before. This figure uses lots of parts from Superman surprisingly. With the exception of the paint being purplish and the backwards S in his chest, this figure is mostly the same but different in a good way. Like the Dred Scott Decision of 1857! If you would like to learn more better about this backwards guy, do as listed for Supergirl above!

THE ME HALF OF THE EQUATION

Ethan bought it on a day some years ago. Bro.

#0128: Superman

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SUPERMAN

JUSTICE LEAGUE (MATTEL)

A large portion of my appreciation for DC characters comes from the DC Animated Universe, created back in the early 90s by Bruce Timm and Paul Dini, when they first started Batman: The Animated series.  Batman led to Superman and Batman Beyond, and eventually, they moved on to what many see as the greatest entry on the list: Justice League and Justice League Unlimited.
Kenner offered the initial figures for BTAS, and when they were bought out by Hasbro, Hasbro continued.  By the time of JL, Hasbro was interested solely in Batman and Superman variants, so they had no plans to release the team from the show.  Eventually, the license was moved to Mattel, and Mattel quickly released a set of the seven main characters.  Today, I’ll be looking at the Superman from that line.

THE FIGURE ITSELF

Superman was modeled after his design on the show, specifically his look from the first season, although the differences are minor.  He stands just shy of 5 inches tall and features 5 points of articulation.  The sculpt is really sharp, and  very accurately represents the design on the show.  The design doesn’t really translate well to articulation, so Mattel seemed to go for the looks over movement, and I actually greatly prefer it this way.  I do wish that he had a little less of a hunched look on his neck, but overall, it doesn’t look too bad.  For the most part, Superman is molded in the appropriate colors where necessary, but what paint is there is fairly cleanly applied, and has no real issues.

THE ME HALF OF THE EQUATION

While I rushed to get the rest of the members of the team, I had plenty of Batmen and Supermen, so the two of them kinda had to wait.  Superman was actually not picked up individually, but actually was included with the Javelin 7, which I believe my brother and I bought a few years ago from a local toystore.  My brother kept the Javelin 7 to himself, and I got the Superman.  It’s probably one of the best animated Superman figures released, and fits nicely with the rest of the line.