#2739: Tri-Sentinel

Posted by Ethan Wilson in Reviews and tagged with All Time Toys, Build a Figure, Hasbro, Marvel, Marvel Legends, Sentinel, Tri-Sentinel, Tri-Sentinel Series, X-Men April 14, 2021

TRI-SENTINEL

MARVEL LEGENDS (HASBRO)

The Sentinels, a recurring X-Men foe since their introduction in the ’60s, continue this trend as foes into the “House of X” story line, where they and the humans present the primary faction warring against the titular team of mutants. As the story jumps around, we see the Sentinels in a variety of forms, as their designs advance. During the sequences set 90 years in the future, amongst the Sentinel forces are a new form of the Tri-Sentinel, dubbed the Theta Sentinels. Despite their quite minor role, they nevertheless serve as the inspiration for the newest X-themed Build-A-Figure for Marvel Legends, which I’m taking a look at today.

THE FIGURE ITSELF

The Theta Sentinel, or “Tri-Sentinel” as it’s been dubbed by Hasbro on the packaging, is the Build-A-Figure for the Tri-Sentinel Series of Marvel Legends. It’s based on the Theta Sentinel design as seen in the future sequences of “Powers of X”, tying it in with the rest of the assortment…sort of. I mean, most of them are present day designs, and it’s from the future. I guess Wolverine goes with it? Maybe that was the main reason for him getting the extra head? That would actually make sense. Good form on Hasbro, I guess. The figure stands 8 inches tall and has 31 points of articulation. There was discussion when this figure was unveiled (well, after the resounding “wait, what is that?” reaction) about it making use of parts from the SP//dr Build-A-Figure, but it actually doesn’t share any parts with that release at all. Instead, it’s an all-new sculpt, based directly on the art from the book. It’s not a bad piece. It captures the design from the series pretty closely, and it’s fairly clean. The detailing does feel a little soft in a few spots, especially on the core body, but it’s not terrible. The articulation is also pretty solid, allowing for a rather wide range of motion, without too much impact on the sculpt. The only real issue is with the way the heads connect to the torso. Firstly, the sculpting doesn’t allow for a ton of range at the base of the heads, and secondly, they just really don’t want to stay in place. That middle head in particular just keeps wanting to pop out of place on mine. I think the socket for the joint is just a little too shallow for it to properly seat. On top of that, it’s pretty hard to get the heads in there in the first place, due to the tight, cluttered placement, and how small the necks are relative to the heads. It wasn’t a very pleasant experience putting it together, really, especially for my hands. The paint work on the Tri-Sentinel is pretty basic, and follows the usual Sentinel set-up. A few different purples, and some silver and grey. There’s a lot of metallics in the finish, which does look pretty good. The application’s generally pretty clean. There are some slightly fuzzy edges, but for the most part it’s pretty good. This figure gets no addition accessories, but as a Build-A-Figure, that’s not really a point against him.

THE ME HALF OF THE EQUATION

The Theta Sentinel is a really minor player, enough that I had literally no clue who the Build-A-Figure was supposed to be when Hasbro announced this set. I had to actually look it up, and even that didn’t exactly give me a lot to go on, especially given how minor the Theta Sentinels were. Getting this figure wasn’t much of a driving factor behind getting the set or anything, so I just, sort of, completed it. It’s an alright figure. The posability on the body is nice, but the heads are frustrating, and having no attachment to the character leaves me in an odd spot with it. It feels like there were probably better choices for this slot, but I guess they tried to make the best of what it was.

I find this whole assortment to sort of illicit almost a non-response from me. I’ve been keeping current with the current X-books, but “House of X” itself wasn’t much for me. Ultimately, this set’s kind of middling, I guess. Moira and Jean are two long term wants, that turned out decent, if perhaps not quite as good as I’d hoped. Wolverine and Cyclops are both solid, if perhaps slightly redundant, variants of core characters and a lot of fun. Xavier and Magneto aren’t really designs I care for, nor do the figures really do a lot to win me over. The pleasant surprise for me was definitely Omega Sentinel, who I had knowledge of going in, but who makes for a pretty fun little figure. Overall, it’s a set I like well enough, but I don’t know if it’s much to write home about.

#2738: Cyclops – House of X

Posted by Ethan Wilson in Reviews and tagged with All Time Toys, Cyclops, Hasbro, Marvel, Marvel Legends, Tri-Sentinel Series, X-Men April 13, 2021

CYCLOPS — HOUSE OF X

MARVEL LEGENDS (HASBRO)

“Cyclops assembles a team of mutants to destroy the Mother Mold and vanquish the Sentinel threat.”

After using him as something of a cross between a punching bag and a patsy for all things wrong with the X-books at the time, the original 616 version of Cyclops was ultimately killed off in a rather unceremonious fashion during what would ultimately prove a somewhat forgettable cross over. Fortunately, someone over at Marvel realized that wasn’t the best treatment for the first X-Man, and he was resurrected, and subsequently given a central, and far more on-brand for the character, role in the X-Men’s latest revamp, sporting a classically-inspired design to match. Now that design’s got a figure, which seems about right to me.

THE FIGURE ITSELF

Cyclops is figure 6 in the Tri-Sentinel Series of Marvel Legends, and is the final of the single-packed figures in the set. He’s sporting Scott’s newest design, first introduced in “House of X”, and continuing into the main X-books. It’s a merging of a handful of his prior designs, drawing a lot from the body of his Now! design, but with a more classically-inspired visor design, and the gauntlet set-up on the arms, much like his second Astonishing costume. It’s a good design for the character, keeping a lot of the better elements of more recent looks, and merging them all into something that flows well together, and keeping that classic flair. The figure stands 6 1/4 inches tall and he has 32 points of articulation. He’s built on the Bucky Cap body, like all of the other modern-era Cyclops figures. If it ain’t broke, don’t fix it, I guess. He also makes use of the cowled head from the Dark Phoenix two-pack version, which is a good, clean sculpt, marred only by the fact that the visor is ever so slightly misplaced on my copy, leaving a bit of a gap in the sculpt on the left side of the visor. It’s fairly minor, and not terribly noticeable in person, but it still could be a bit better. Cyclops also gets a new set of arms, and a new belt piece. The arms add his gauntlets, as well as upgrading the elbows to the new pin-less design. The new belt is, at first glance, very similar to the Now! figure, but it’s got a far greater depth of detail, and makes for a much stronger final product. Cyclops’s paint work is fairly decent. The blues go well together, and the whole thing looks pretty slick. The line work has a little bit of slop, and there’s less clean application on the visor, but on the whole, it looks pretty good. Cyclops is packed with an alternate head and attachable optic blast, repurposed from the X-Factor Cyclops figure. It’s nice to see those parts turn up again, because I really liked them the first time around. He’s also packed with the left arm of the Tri-Sentinel Build-A-Figure.

THE ME HALF OF THE EQUATION

I’m a sucker for a halfway decent Cyclops figure, so I was on-board for this guy from the word go. There’s not a ton new or unique to him, but he works well within the formula of the line, resulting in a solid and clean figure. Honestly, he’s my personal favorite from this particular line-up, though I guess being a Cyclops does give him a slight advantage on that front.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review. If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2737: Magneto – House of X

Posted by Ethan Wilson in Reviews and tagged with All Time Toys, Hasbro, Magneto, Marvel, Marvel Legends, Tri-Sentinel Series, X-Men April 12, 2021

MAGNETO — HOUSE OF X

MARVEL LEGENDS (HASBRO)

“Magneto forges an unlikely partnership with Xavier in pursuit of a lofty common goal: the protection of all mutants.”

The counterpart to Charles Xavier’s peaceful co-existence philosophy since the very beginning has been the more militant Magneto. Magneto, however, is a character defined by his tendency to switch sides as his morals check in and out. Recently, they’ve been checked in more often than not, and he’s spent most of the last decade as an ally of the team, with “House of X” later retconning him as a secret ally the whole time, throwing out all pretense entirely. At the same time, the comics have become big on going for this whole monochromatic set-up for his costume, because I guess that’s clever. Or something. Legends already gave us an all-black Magneto, so I guess it was only a matter of time before we got an all-white one.

THE FIGURE ITSELF

Magneto is figure 6 in the Tri-Sentinel Series of Marvel Legends, and is, like the rest of the set, based on the character’s appearance in “House of X” and the ongoing titles that followed. It’s not terribly far removed from the character’s handful of Marvel Now! looks, being Magneto’s classic costume set up with a new palette dropped on it. The figure stands 6 1/2 inches tall and he has 32 points of articulation. Like the other two current gen comic Magnetos, this guy’s based on the Spider-UK base body, which continues to be a good base for the character. He re-uses the cape add-on piece from the 3-pack Magneto, along with an all-new head, forearms, and belt. The head’s got the separate pieces for the helmet and underlying head, much like the last two releases. It’s quite similar to, but still distinct from, the calm head from the 3-pack. It feels like it didn’t need to be new to me, but Hasbro presumably felt differently. The helmet’s nice, but there’s definitely something a little bit off about the underlying face. It looks rather goofy, and maybe not as stern as they were aiming for. The new arms and belt help to bring the figure’s design more in line with the comics appearance, and do their job pretty well. I was a little disappointed that they didn’t take advantage of retooling the forearms to remove the exposed pins, as they have on a few other recent revisions, but it’s possible it didn’t cost out. Other than that, the figure’s sculpt is pretty much just business as usual. In terms of paint, this guy embraces the monochromatic nature of the modern Magneto design, so there’s not a ton of variance going on. There are some silvers and blacks thrown in for accenting, and they aren’t bad. The application’s also pretty sharp, which is a plus. He does ditch some of the ribbing on the sides of his costume, but at least he doesn’t ditch everything wholesale like Xavier did. Magneto is packed with three sets of hands, open gesture, gripping, and fists. It’s a nice assortment, and nice to get all the variety. Additionally, he’s packed with all three of the Tri-Sentinel Build-A-Figure’s heads.

THE ME HALF OF THE EQUATION

Magneto’s classic color scheme is really hard to top for me, so I tend to be resistant to current trends of going all black or all white. The all white look in particular tends to strike me as being just sort of odd for the character. So, with that said, I wasn’t really feeling this guy when he was announced. And, if I’m entirely honest, I don’t know how much I’m feeling this guy in-hand. The 2019 release is just hard to top, and this one’s got the issue of that wonky face to deal with. It’s not bad, I suppose, just a little uninspired feeling at the end of the day.

#2734: Moira MacTaggert

Posted by Ethan Wilson in Reviews and tagged with All Time Toys, Hasbro, Marvel, Marvel Legends, Moira MacTaggert, Tri-Sentinel Series, X-Men April 9, 2021

MOIRA MACTAGGERT

MARVEL LEGENDS (HASBRO)

“Through the course of many lives and deaths, Moira MacTaggert pursues justice for all mutants.”

Introduced by Chris Claremont and Dave Cockrum in X-Men #96, Dr. Moira MacTaggert would serve as a rather prominent supporting character in the X-Men universe until well into the ’90s. She was a notable human character amongst the book’s largely mutant cast, and even more notably, a human who not only didn’t hate mutants, but was actively seeking to help them….that was, until “House of X” went and revealed that Moira wasn’t a human at all, but was instead a mutant with the ability to reincarnate and relive her life over and over, but exactly in such a fashion that her mutant nature was undetectable through all usual means of detection so as to not openly violate the four decades of history of the character being, you know, not a mutant. Look, I have feelings about this whole thing, and they’re definitely mixed. But, I mean, it means that Moira is prominent again, and it means she got an action figure, and isn’t that what matters the most?

THE FIGURE ITSELF

Moira is figure 4 in the Tri-Sentinel Series of Marvel Legends. Like the others in the set, she’s based on “House of X”, specifically on Moira’s look from her current life/timeline. While I personally would prefer her jumpsuited look from the ’70s, I guess this one’s okay too. The figure stands a little over 6 inches tall and she has 27 points of articulation. Fortunately, her articulation’s more useful than yesterday’s Jean Grey, which is a definite plus. Moira’s largely built out of the same bank of parts as last year’s Gwen Stacy figure, but with a new head and coat piece, as well as the Peggy Carter shoes again. The shoes at least make more sense here, and it’s possible their use here is why they showed up on Jean as well. The re-used parts work well for the look they’re aiming for, and the new head and jacket likewise match up pretty well for the character. The default head is sporting glasses, which are a thing that Moira had occasionally, though they again aren’t necessarily out of place for the character. They’re also well-rendered, especially for the scale, and the really look quite nice. The jacket piece sits just a touch high on the shoulders, but is other wise a nicely sculpted piece. They’ve even sculpted the pens in her pocket. Moira’s color work is a bit more subdued than the usual Legends figure, but it matches the source material, and it’s again pretty solid for the character. The paint work is pretty basic, but it hits all the right marks and the application is pretty clean and sharp. In terms of accessories, Moira’s pretty well packed. She gets a spare head, arms, hands, and a neckerchief piece, allowing for a rather different second look for the character, based on her less scientific attire from the miniseries. It’s not my bag personally, but getting an extra look’s really not a bad thing. Moira also includes a scientific textbook of some sort, as well as the left leg of the Tri-Sentinel Build-A-Figure.

THE ME HALF OF THE EQUATION

Moira’s pretty rooted into the ’70s-’80s X-Men run, as well as the ’90s cartoon, which are really my main sources of X-Men, so I definitely like the character, but the concept of getting her as a toy seemed rather unlikely, given her typically less action oriented role in the franchise. Personally, I’m not much of a fan of the move to make Moira a mutant, as I feel it removes some of what’s special about the character, but at least her increased roll gave Hasbro a good excuse to make a figure of her. It’s honestly a pretty solid figure, and one of the bigger draws to this set for me. I’ll still keep holding out for a ’70s version, but given how slim the chances of getting that one are, I can at least make due with this one.

#2733: Jean Grey – House of X

Posted by Ethan Wilson in Reviews and tagged with All Time Toys, Hasbro, Jean Grey, Marvel, Marvel Legends, Tri-Sentinel Series, X-Men April 8, 2021

JEAN GREY — HOUSE OF X

MARVEL LEGENDS (HASBRO)

“Jean Grey leads her fellow mutants to the island sanctuary of Krakoa in a bid to declare sovereignty from humankind.”

After sticking with their matching gear for their first 38 comic appearances, the X-Men finally got their own customized looks courtesy of artist Werner Roth in Uncanny X-Men #39. While some of the designs (mainly Angel’s really) would be rather quickly ditched, a few of them really stuck in there, and influenced the main looks for the characters going forward. This was most evident with both Cyclops and Jean Grey, whose main designs, no matter what they may be, have a tendency to call back pretty heavily to these earlier designs. Jean’s Marvel Girl costume actually got a fair bit of play, even going forward, managing to even get a reappearance during “The Dark Phoenix Saga,” and has once again resurfaced as Jean’s primary design in the new ongoing run of the title. I have…mixed feelings about that last part, but I do like the design well enough that I won’t complain too much about it getting Legends treatment as a result of its new prominence.

THE FIGURE ITSELF

Jean Grey is figure 3 in the Tri-Sentinel Series of Marvel Legends. While technically “House of X”-based like the rest of this assortment, this particular figure is a little more multi-purpose, what with the re-used design and all. This is the second time that this particular design’s been made as a Legends release, following Hasbro’s kind of janky version from that two-pack very early in their run from the license. This one aims to be less janky. The figure stands just over 6 inches tall and she has 27 points of articulation. In terms of mobility, Jean’s a rather restricted figure by modern standards. The hair rather predictably blocks a bit of the neck movement, but on top of that, the skirt piece is rather thick and leaves no real movement on the hips, and the way the ball-jointed waist has been sculpted means it doesn’t get much of range either. In general, it’s not ideal, and makes it tricky to get her to do much other than stand there. Of course, she struggles with standing a bit, too, so maybe that’s not her strong suit, either. Movement may not really be there, but does the figure at least look good? Yeah, for the most part. She uses the Phoenix body as a loose starting point, which is sensible, and also uses the flared glove forearms from Kitty Pryde. She also uses the feet from Peggy Carter, which was an odd choice, since it’s clearly got sculpted shoes, and Jean’s clearly wearing boots. It’s not like there aren’t heeled feet without the shoe line sculpted, so I’m confused by the choice. Other than that, Jean’s got a new head, torso, and skirt piece. They may not allow for a ton of movement, but they do certainly look nice, with nice, balanced proportions, and some quite impressive smaller detail work on the folds and wrinkles on the clothes. The paint work on Jean is pretty simple, largely relying on molded colors and slightly more complex assembly of pieces. The paint that’s actually there is all pretty cleanly handled, with no slop or bleed over to speak of. The colors are on the bright side, which generally works, although it does make the purely painted distinction between the boots and the legs a little less noticeable than it should be. That’s a very minor complaint, of course. Jean is packed with two sets of hands, one set in fists, and the other in open gesture, as well as a small Krakoa plant. The plant’s cool, but she does have a little bit of trouble holding it, since neither set of hands is really designed for it. Also included is the right leg to the Tri-Sentinel Build-A-Figure.

THE ME HALF OF THE EQUATION

This is a pretty classic design, and one that’s toy coverage has classically been less than stellar, so I’ve been hoping for a more proper Legends release. When this set was first hinted at by Hasbro, I was hoping this figure would be in the line-up, and I was quite happy when that proved to be true. The final figure’s not quite as strong as I was hoping, mostly due to that restricted motion. That said, she’s at the very least a nice looking figure, which is more than could be said for the last Legends version.

#2732: Omega Sentinel

Posted by Ethan Wilson in Reviews and tagged with All Time Toys, Hasbro, Marvel, Marvel Legends, Omega Sentinel, Tri-Sentinel Series, X-Men April 7, 2021

OMEGA SENTINEL

MARVEL LEGENDS (HASBRO)

“Harnessing the power of enhanced sensors, flight, and nanite regeneration, Omega Sentinel dispatches enemies with ease.”

In the ’90s, the giant, lumbering, mutant-hunting robots the Sentinels found themselves upgraded for the times, becoming the Prime Sentinels, a merging of humans with robotic components and programming. Amongst this new breed of Sentinels was Karima Shapandar. Karima was a reluctant foe of the X-Men, and would ultimately work by their side a handful of times over the years, taking on the name “Omega Sentinel”. More recently, her Sentinel programming has taken over more and more, leading to her playing the role of antagonist during the “House of X” story line. Hey, it got her a figure, at least, right? Full disclosure: I have virtually no first hand knowledge of Omega Sentinel, and am entirely operating off of what I could find online for the purposes of this review.

THE FIGURE ITSELF

Omega Sentinel is figure 2 in the Tri-Sentinel Series of Marvel Legends, and is the only non-team member included in the line-up. She’s shown here in her more fully Sentinel-ized appearance, as seen in the mini-series, which is a fairly distinctive appearance, and certainly on-brand with the current set-up of figures. The figure stands 6 inches tall and she has 27 points of articulation. Omega Sentinel is sporting an all-new sculpt, just for her. It’s a tiny bit surprising, especially given how a Xavier wound up on the Pizza Spidey body, but it means that all of her costume elements can be actual sculpted elements, as opposed to relying more heavily on paint. It’s actually a pretty nice visual set-up, and generally gives her a little more pop than she might otherwise have. By far, the most impressive piece of the figure’s sculpt is the arms, which have that proper mechanical design, and a lot of very nice smaller detail work. Her standard head out of the box is based on her primary look from the mini-series, which had her bald, as she has been a few times prior. It’s really the coolest look, I think, and it presents well here. Omega Sentinel’s paint work is pretty standard Legends fare; base work that’s generally pretty well applied. There’s a little bit of missed coverage on her upper legs, but otherwise my figure’s pretty solid, and it’s a pretty striking color palette. Omega is packed with both an alternate head and lower arms. The head is supposed to be Karima from earlier in her career, before the whole bad guy thing, and it’s not awful from a sculpting stand point, but the coloring is just plain wrong. Karima’s supposed to be Indian in the comics, and has classically been depicted with close to black hair and a darker complexion. This one goes for more of an auburn hair color and a much lighter skin tone, making her look rather caucasian, which is just inaccurate. I’m not exactly sure why they went this direction with it. I prefer the other head anyway, but it still would be nice if this one was accurate. On the plus side, the alternate arms are far cooler, and haver her lower arms shaped into weapons of some sort. I like them a lot, and they’re going to be my default set-up for the character. In addition to the character-specific pieces, Omega Sentinel also includes the torso for the Tri-Sentinel Build-A-Figure.

THE ME HALF OF THE EQUATION

As I noted in the intro, I had no prior knowledge of Omega Sentinel prior to this figure’s announcement, and actually had to look her up when she was shown off. I was honestly not really much looking forward to this one, and expected her to kind of be the week point of the set for me. However, I did some reading up on the character, and I can get behind the concept, and I can also get behind actually getting some new characters in figure form. It helps that, in hand, I found myself quite liking this figure, and she’s far from the dead weight I thought she would be. She’s honestly just a pretty nice figure, and I look forward to putting her with my Prime Sentinels once they arrive.

#2731: Charles Xavier – House of X

Posted by Ethan Wilson in Reviews and tagged with All Time Toys, Hasbro, Marvel, Marvel Legends, Professor X, Tri-Sentinel Series, X-Men April 6, 2021

CHARLES XAVIER

MARVEL LEGENDS (HASBRO)

“Xavier reveals his master plan … one that will bring mutants out of humankind’s shadow and once again into the light.”

Charles Xavier, more commonly referred to as Professor X, doesn’t, in his default state, tend to make a classically exciting action figure. Bald guy in a suit and tie, sitting in a wheel chair isn’t exactly getting kids to go crazy for the toys (unless they’re some weirdo kid who wants Xavier before Wolverine and Magneto because he’s far more plot important and is less likely to get another toy as quickly, and why don’t you understand that, Nana?…sorry, I went places there…). Because of this, various media does have a tendency to give Xavier excuses to put on slightly more toy-etic gear. Most recently, Xavier’s ditched the suit and the wheelchair, and is wearing something more classically comic-book-y, I guess? Well, there’s a toy of it, so let’s check that out.

THE FIGURE ITSELF

Charles Xavier is figure 1 in the Tri-Sentinel Series of Marvel Legends, and like Wolverine, he’s officially “House of X” branded. Xavier is in his current default attire, which puts him in a spandex jumpsuit, and makes the Cerebro helmet a more permanent fixture. It’s a different visual for the character. I don’t know that it’s all that different a visual for the formerly-idealistic-now-morally-grey-leader-of-the-team-following-a-relaunch, since it’s rather thematically similar to Cyclops’ Marvel Now appearance. But, maybe that’s on purpose? The figure stands 6 1/4 inches tall and he has 32 points of articulation. Xavier is built on the Pizza Spidey body…which is an interesting choice. I guess it’s not the worst, as Xavier’s been depicted as rather svelte, especially recently, but it feels weird for Professor X to be on a Spider-Man body, to me. They’ve replaced the hands with ones from the suit body, so that fixes those slightly cartoonier proportions, but the feet remain the same, so that’s still going on. He’s got a new head sculpt wearing his new helmet. It’s an okay sculpt, and certainly is the most visually intriguing portion of the figure. Paint on this guy is exceedingly basic. There’s paint on the visor of the helmet. That’s it. The body’s all black plastic, which isn’t technically accurate; there should be some piping or minor detailing on the suit. There’s also been inconsistency about whether Xavier has gloves on his suit or not; I would have preferred not, since it would break up the colors a bit. Xavier has a decent selection of accessories, with two sets of hands (in relaxed, and pointing/telepathy hand combo), an alternate un-helmeted head with a telepathy effect, and the right arm to the Tri-Sentinel Build-A-Figure. The alternate head’s definitely the coolest part, especially given it’s potential uses with the previous Professor X figure.

THE ME HALF OF THE EQUATION

Xavier’s newest design is one of the more drastically changed ones, but I find it to be too drastically different to really feel like Xavier. When it comes to more action-oriented Xaviers, I’ve always been more partial to the tactical gear in the hover chair look from the ’90s, and I’m still waiting for that one to get some proper toy coverage. But that’s not what I got here, and I suppose I shouldn’t hold it against him. Of course, what I probably can hold against him is the slightly phoned-in nature on this guy. The extra head’s cool, but there’s not really much else about him that really speaks to me.

#2730: Wolverine – House of X

Posted by Ethan Wilson in Reviews and tagged with All Time Toys, Hasbro, Marvel, Marvel Legends, Tri-Sentinel Series, Wolverine, X-Men April 5, 2021

WOLVERINE — HOUSE OF X

MARVEL LEGENDS (HASBRO)

“With adamantium claws unleashed, Wolverine is prepared to make the ultimate sacrifice in the fight for freedom for all mutants.”

Last year’s main X-Men-theme per Marvel Legends was very event-based, specifically centering on 1995’s “Age of Apocalypse” event. For the first X-themed assortment of this year, Hasbro is once again going event-based, but this time around is something far more recent, this time being 2019’s “House of X”, the event which served as the launching point for the Jonathan Hickman-driven current era of X-Men. A lot of the team’s biggest names were central to both that event and what’s followed in the on-going books, making this a nice way of refreshing some of the X-Men’s heaviest hitters. You don’t get much heavier hitter than Wolverine, I guess, making him a pretty solid starting point if I do say so myself.

THE FIGURE ITSELF

Wolverine is part of the Tri-Sentinel Series of Marvel Legends, and is officially branded as “House of X,” much like the rest of the assortment. He’s the only non-numbered figure in the set, as the only figure not to include a Build-A-Figure part. He’s sporting his current costume design, first showcased in the event. It’s an update on his brown costume, with a little bit of the Black/Grey X-Force layout worked in. It’s not a bad look for the character, and really checks a lot of the classic Wolverine boxes. The figure stands just shy of 6 inches tall and he has 32 points of articulation. Structurally, he’s built on the modern Wolverine base first introduced in the Juggernaut Series. He uses the more utilitarian gloves and boots from X-Force Wolverine, which are good match for what he’s sporting in the comics these days. He’s also got a new head sculpt, and an add-on for his belt, both of which are pretty decent pieces. The head in particular I quite like, as it’s got him actually cracking a smile, which is a nice change of pace for a Wolverine figure. I also like that the mask is differently shaped than other Wolverine figures, and that they’ve included all of the seams and such on the cowl that help to “modernize” this design. Wolverine’s paint work is generally pretty solid. He follows the established color scheme from the comics well, and there’s no notable slop or bleed over, so that’s good. I do like that they actually went to the trouble of differentiating the browns on the main costume vs the accessories. The arm hair detailing on the arms is about the same as other recent Wolverines, which works from a consistency stand point if nothing else. Wolverine is the lightest figure in the assortment on the accessory front, due largely to the lack of a Build-A-Figure part. He does at least get an extra head, based on his time as “War” in the future sequences of “Powers of X.” The main difference is the presence of a beard. Very different. It’s a decent extra, I suppose, although the likelihood of getting the other three horsemen seems slim, giving this particular piece limited applications.

THE ME HALF OF THE EQUATION

The whole House of X thing just sort of happened around me, I guess. I read it, and I was familiar with the whole concept, and I’ve stuck with the comics since then. The designs are generally pretty decent, and Wolverine’s a good, fairly standard Wolverine. The figure doesn’t really do anything new, but he’s not bad, either, and certainly has more reason to exist than some of the other recent Wolverines.