Tag Archives: Wacky Variants

#3461: Superman – Fortress of Solitude

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SUPERMAN — FORTRESS OF SOLITUDE

SUPERMAN: THE ANIMATED SERIES (KENNER)

“Upon retreating to the distant Fortress of Solitude, Superman wears the traditional costume of his home planet Krypton, rejuvenating his immense powers and developing prototype peace-keeping weapons from centuries-old Kryptonian crystal technology.”

When it comes to the DC Animated Universe, Batman: The Animated Series gets a lot of love.  Deserved love, mind you; it earned its place in history.  However, for my money, the unsung hero of the DCAU is BTAS‘s follow-up, Superman: The Animated Series, which takes the success of Batman, and builds on it, creating the groundwork for the wider DCAU that would eventually spawn Justice League Unlimited, and would craft a wider appreciation for the DC universe as a whole.  It’s genuinely my favorite entry in the franchise, and holds up as one of my favorite takes on the Man of Steel.  One area where I think it really blows away every other iteration of the Superman mythos is its depiction of pre-destruction Krypton.  While the toyline missed most of it, they did at the very least throw us a bone with “Fortress of Solitude” Superman, who I’m taking a look at today.

THE FIGURE ITSELF

Fortress of Solitude Superman was released in what was intended to be the third series of Kenner’s Superman: The Animated Series toyline.  They were shown off in 1997 and received an international release in 1998, but they wouldn’t make their way to the states until 2001, when they started showing up at KB Toys, with exactly no fanfare.  Hey, better late than never, right?  The figure stands 5 inches tall and he has 6 points of articulation.  Fortress of Solitude Superman was a largely all-new sculpt when he was released.  He’s based on Clark in traditional Kryptonian attire, as he’s briefly seen in “The Main Man Part 1.”  The look has been modified a bit, which was a pretty expected move for this line.  The biggest change is the addition of a S-logo on the front of the tabard; the look otherwise has no clear branding, I guess, and branding was definitely very big here.  In keeping with other figures from the line, he also gets extra detailing on areas that were simpler on the show, in this case the squares on his arms and legs, which now are properly raised, with further design elements added.  It’s not accurate, but it’s admittedly pretty cool.  There were a few different Superman head sculpts that ran through the line, with a range of show accuracy.  This particular assortment lands somewhere in the middle; not as bad as the first series, but not as close as the fourth.  It’s just a touch too tall and narrow for proper accuracy, but it’s not terrible.  The color work on this guy is interesting, because it *could* be a lot more basic than it is, and be more accurate.  Instead, they go a different angle.  Where his body suit should just be stark black, it’s instead semi-translucent, with metallic flecks, giving him a cool star field looking pattern.  Also, the tabard is removable, and while there’s no reason to have any detailing underneath, he’s got another Superman emblem.  Really pushing that branding, huh?  Superman is packed with a “Turbo-Spin Crystal Cannon.”  Whatever that may be.  It’s big and hard for him to hold, but, you know, there it is.

THE ME HALF OF THE EQUATION

Back in the day, I spent a lot of my time on Raving Toy Maniac, which had a whole bunch of figure archives run by Toy Otter.  One of those was for the Superman: The Animated Series line, which is how I knew about this figure three years before he made it to the states.  I had a printed out picture of the prototype that I’d turned into a paper figure and everything.  Imagine my pleasant surprise when I found him at KB Toys in 2001.  I don’t have a ton of memories about him, but I do recall him being the only action figure I managed to smuggle with me on the one and only camping trip I did during my very short Cub Scouts career.  My original went missing somewhere over the years, but I was able to get a complete replacement thanks to a handy trade-in that came into All Time back in the spring.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3412: Bombastic Bag-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BOMBASTIC BAG-MAN

MARVEL LEGENDS (HASBRO)

“Left without a costume, a desperate Peter Parker dons a spare Fantastic 4 uniform and a brown paper bag. And so the Bombastic Bag-Man was born!”

We live in a crazy era for Marvel Legends.  Like, I just can’t be clear enough about that.  It’s an era of getting, serious, actual, fully planned out figures of gag concepts.  Case in point: Bombastic Bag-Man.  After discovering that his black costume was an alien symbiote with its own agenda, Peter Parker enlisted the help of Reed Richards to remove the symbiote.  Left without a suit, he borrowed an older FF suit and a paper bag.  In true Spider-Man fashion, Peter has to stop a crime on his way home, still sporting his makeshift costume, and introducing himself as “The Bombastic Bag-Man.”  It’s silly, and really not a marketable Spidey look, but it’s also a fan-favorite.  It’s come close to figure form a few times, never quite making it to the finish line.  Hasbro, however, has finally made it actually happen.  Crazy.

THE FIGURE ITSELF

Bombastic Bag-Man is a Target-exclusive Marvel Legends release.  He’s a one-off on the Marvel Super Heroes style retro card, and he was part of Hasbro’s overall celebration of Spidey’s 60th Anniversary.  The figure stands 6 1/2 inches tall and he has 30 points of articulation.  Bag-Man is built on the Reed Richards modification of the Pizza Spidey body.  Why they didn’t just use the Pizza Spidey body straight is anybody’s guess; perhaps they just thought this one was more Fantastic Four-y.  I’m a little bummed that it means he loses the butterfly shoulder, but it’s still a decent body.  He also re-uses the feet from Shang-Chi, made evident by their lack of peg-holes.  The figure’s topped off by a new head sculpt, for the full Bag-Man effect.  The bag and the actual head are separate parts; the bag isn’t removable, and the head beneath only actually gets eye and chin detailing, but it gives everything the appropriate depth.  The actual bag sculpt is also just really good; it honestly looks just a real paper bag that’s been shoved over his head, down to the mis-shaping for his nose.  The color work on Bag-Man is largely meant to mimic the colors on the Walgreens FF releases.  It’s appropriate, since it’s supposed to be one of the same uniforms, and all.  That said, it’s not an exact match.  The blue is a slightly brighter shade, and the exact sizing of the “4” logo is a bit larger.  Granted, for true accuracy, he’s meant of pair off with the Byrne-era costumes anyways, so it doesn’t truly have to match, I guess.  Bag-Man is packed with two sets of hands (fists and open gesture) as well as the “Kick Me” sign Johnny stuck on his back.  That piece is gonna get a lot of use for sure.

THE ME HALF OF THE EQUATION

As I’ve gotten into a few times here, I’ve given up on the exclusives game for the most part.  But, somehow most of it ends up in front of me, just the same.  I dig Bag-Man as a silly concept, so I was glad to get a chance at one when he came into All Time.  He’s not perfect, but he’s certainly fun.  And we live in a time where there’s a freaking Bag-Man figure.  Crazy.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3365: Cyclops

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CYCLOPS

X-MEN (TOY BIZ)

“Studying the genetic structure of Scott Summers’ family for many years, Mister Sinister took special care when mutating Cyclops into the one-eyed mutant monster Cyclaw! A bizarre genetic creation, Cyclaw is a one-eyed beast with optic blasts that disintegrate whatever they hit! Completely under the control of Mister Sinister, Cyclaw is Sinister’s chief weapon against the remaining X-Men!”

At the end of the ’90s X-Men toyline from Toy Biz, they got much more experimental with themes.  1997 seemed to hit peak levels of weirdness for that experimentalness, including turning a bunch of the team into monsters.  You know, as you do.  Amongst the X-Men getting all monster-ized was Cyclops.  Big surprise, I have a Cyclops figure to review.  I know.  Crazy.  Anyway, let’s look at the figure.

THE FIGURE ITSELF

Cyclops is part of the “Monster Armor” series of Toy Biz’s X-Men line, which was the line’s 20th assortment.  He was the line’s sixth version of Cyclops.  The standard portion of the figure is sporting Scott’s Jim Lee costume, which made its second appearance in the scale here, after Cyclops II.  The figure stands just over 5 inches tall and has 8 points of articulation.  This assortment’s articulation set-up marked a move towards slightly less posable, and slightly more detailed sculpts, as Toy Biz attempted to emulate some of the McFarlane style that had become so popular towards the end of the decade.  Scott made out alright, though he lost elbow and knee movement.  On the flip side, he got universal joints at the shoulders, and a swivel at the waist.  I’ve actually looked at most of this figure’s sculpt before; it was re-used the next year for the X-Men vs Street Fighter version of the character.  The unique piece between the two was the head sculpt.  This one is a far more intense sculpt, with his head back and his expression screaming.  It’s not exactly an all-purpose sort of sculpt, but I guess it’s unique.  It also fits that whole “I’m transforming into a monster” vibe that the whole set was going for.  The figure’s paint work was more on the basic side.  His colors were very bright; arguably too bright for his design, and that’s something the X-Men vs Street Fighter figure would adjust.  Cyclops, like the rest of the series, was packed with a selection of clip-on Monster armor, which turns him into “Cyclaw,” which is kind of a lackluster name.  There’s a mask, “gloves”, and “boots.”  My figure is missing the feet pieces these days, but beyond that, the remaining pieces are appropriately grotesque and horrifying.

THE ME HALF OF THE EQUATION

Cyclops was, unsurprisingly, the only one of this set that I got when they were new.  Look, I liked Cyclops, okay?  He got some play time as my standard Cyclops, before getting pretty quickly replaced by the Vs version.  Something about the head always seemed a little off to me, but I really liked the monster set-up, so that got a lot of use.  And, honestly, that was kind of the main point, right?

#3355: Cyclops

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CYCLOPS

X-MEN: SECRET WEAPON FORCE (TOY BIZ)

“In an alternate universe very different from the one the X-Men come from, Cyclops acts on his own. Friend or foe, do not get in the way of Cyclops’ powerful optic blasts. With but the blink of an eye, Cyclops can punch a hole through the thickest walls or blast an opponent from the sky. Cyclops’ War Tank Battle Blaster is always at his side ready to unleash its secret weapon on any unsuspecting foes. Cyclops seems to be united against the evil mutant Apocalypse, but has yet to join forces with Wolverine and Jean Grey. Only time will tell if the three heroic X-Men will reunite for one final, ultimate battle.”

By the late ’90s, Toy Biz’s long-running 5-inch Marvel imprint had moved away from purely comics and cartoon adaptations, with their main lines based on Spider-Man and X-Men both getting a more toyetic flair.  In 1998, the X-Men line got the subtitle “Secret Weapon Force,” which meant plenty of wacky variants for the main characters.  The first assortment under this banner placed Wolverine, Cyclops, and Jean Grey in a *very* loosely AoA-inspired setting, with Cyclops in particular taking the “loosely” part of that to heart.  But hey, cool Cyclops is cool Cyclops.

THE FIGURE ITSELF

Cyclops was released in the “Battle Blaster” series of Toy Biz’s X-Men: Secret Weapon Force line.  Where Jean was a straight-forward AoA Jean (with the slight irony of the package backstory saying she was actually the main universe Jean transported), the other three figures in the set differed a bit in their own ways.  Cyclops was perhaps the most different, since his design had little to nothing in common with the AoA look for the character, instead being more closely linked to the standard Cyclops look.  That being said, this figure sports a design that has no direct comics or cartoon source; he’s instead a toy unique look.  It’s honestly not a bad one, and it’s a little surprising that it never got worked in anywhere over the years.  The figure stands a little over 5 inches tall and he has 9 points of articulation.  The entire Battle Blaster assortment was largely based around what Toy Biz could do with minimal new parts.  For Cyclops’ part, it means he’s almost entirely a re-use of the 2099 line’s Meanstreak figure.  The only difference between the two is the presence of a new visor, sculpted over Meanstreak’s face.  It’s a change that works surprisingly well.  It helps that the Meanstreak sculpt is honestly a pretty good one, meaning that he’s just a very playable figure.  The character specific elements are really kept to a minimum, with only the boots and gauntlets feeling very unique; even then, they read more generically ’90s X-Men anyway, so they still work fine for Scott.  His paint scheme goes for a rather different look for Scott.  There’s notably no blue, which is interesting, but also keeps him further from the Meanstreak origins of the mold, so it makes a degree of sense.  My figure’s paint has taken a beating over the years, as you can see, but he still looks pretty good all things considered.  Cyclops, like the rest of the assortment, was packed with his “Secret Weapon Force” weapon, which is dubbed a “War Tank Battle Blaster.”  It’s big and goofy, and curiously not color coordinated with the figure at all.

THE ME HALF OF THE EQUATION

I was a very big Cyclops fan as a kid, and jumped at any chance for a new version of him in toy form, so I made a point of getting this figure early after his release, during a trip to the nearest KB Toys with my Grandmother.  I remember being very excited for him, and he spent a good while as my default version of Scott, even with the non-standard costume.  He’s a fun figure.  Just a good, fun figure.  And still one of my favorite Cyclopses, honestly.

#3289: Captain America – Tech-On Avengers

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA — TECH-ON AVENGERS

S.H. FIGUARTS (BANDAI)

There’s something of an irony to the most recurrent character at the center of my S.H. Figuarts reviews for the last couple of years has been Captain America, but, well, here I am.  And you know what?  I’m gonna do it again.  In 2021, Marvel partnered with Bandai Namco for a Super Sentai-inspired Avengers series, Tech-On Avengers.  Marvel’s part was publishing a six issue tie-in miniseries, while Bandai’s part was releasing some Figuarts based on the designs seen in the comics.  The premise is pretty simple: the Avengers lose their powers due to shenanigans caused by the Red Skull, so they all have to be outfitted with Stark-designed armor, to become the Iron Avengers.  And I, being me, have the Captain America, which I’ll be taking a look at today.

THE FIGURE ITSELF

Captain America — Tech-On Avengers is the second Tech-On Avengers release in Bandai’s S.H. Figuarts line-up, following the Iron Man from earlier in 2022.  Cap started arriving domestically towards the end of the year, in that early to mid December area.  The figure stands right at 6 inches tall and he has 45 points of articulation.  The articulation on this guy is a little bit finicky; Figuarts often are, but they’ve been getting less so as of late.  This guy’s even more finicky than usual, especially when it comes to the pelvis area.  The waist folds inwards on itself, and the hips are just generally kind of a little tight, which is only made potentially worse by having the waist folded in too far.  There’s also a floating pelvis piece to contend with, which just further complicates movement.  You can still get a decent range out of the figure, but it can take some getting used to.  On the plus side, the way the shoulders are laid out is actually pretty intuitive, and gives him a solid range of motion.  Cap’s sculpt is an all-new one, based on his tech-ed up look.  It’s honestly a pretty fun look, and I kind of dig the Ultraman manga vibe going on here.  It’s a good merging of the Cap, Iron Man, and Sentai vibes, while still maintaining the classic Cap vibe through and through.  The sculpt is quite nicely detailed.  It’s very sharp and clean, and appropriately sleek.  The construction uses just a little bit of die cast metal, which appears to be confined to the feet.  Not sure exactly why, but I guess it at least makes him rather sure footed.  His color work is generally pretty classic Cap fare; red, white, and blue, or at least a close variation of it.  I dig the metallic blue and the varying shades of red, but I’m a bit less sold on the light grey in place of white.  It lacks some of the pop that it should have.  At the very least, the paint work is cleanly applied.  Cap gets an impressive selection of accessories, including five sets of hands (in fists, gripping, flat, open gesture, and with pegs for use with the blast effects), a slightly more tech-y version of his usual shield, four different styles of straps for said shield (for mounting on his back, proper gripping, loose hanging, and one for throwing), a throwing effect, four different blast effects, and a display stand.  One of the gimmicks for Cap’s armor is the ability to use his shield as an extra armor-up feature.  To facilitate that, this guy gets an alternate larger set of hands, forearm guards, shoulder pads, front, back, and lower torso plates, a version of the shield that’s opening up for the armor up feature, and effects for the shield, the front of the torso, and his fist.

THE ME HALF OF THE EQUATION

Overall, Tech-On is a concept that I don’t have much use for.  It’s a bunch of gimmicky variants of characters I have plenty of times over, and they’re all rather on the expensive side.  That being said, I’m a sucker for a fun Captain America variant, and that’s what this guy is.  He’s still perhaps a bit on the pricey side, but there’s plenty going on with this guy that makes him feel worthwhile.  And he’s even got fighting fists?  How can I not love a Cap that has fighting fists?

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3180: Sauron

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SAURON

X-MEN (TOY BIZ)

“Sauron is the most terrifying Evil Mutant. Sauron loves to silently swoop down and use his mutant power to hypnotize and drain the energy out of his victim! Then in the blink of an eye, he flies away ready to strike again! The more energy he drains, the more powerful he becomes. Because he can drain the energy from anyone, even another Evil Mutant, even Magneto, the leader of the Evil Mutants, fears him!”

Not to be confused with the evil ruler of Mordor, Sauron is one of the X-Men’s older foes, predating quite a few of the team’s more popular members–Wait a minute…didn’t I review this figure already?  well, hypothetical reader, the answer to that question is…not technically.  And, technically is what really matters here.  Why?  Because it’s my site, that’s why.  Okay, maybe I should actually explain what the heck I’m reviewing this guy again.  It’s quite simple:  early in the days of their X-Men line, Toy Biz liked to justify the re-releases of figures they’d already done by doing minor tweaks to their color schemes, in dedicated “Repaint” series, in order to not only keep those figures out, but also freshen up the shelves a bit, but without having to actually produce a whole new figure.  Generally, I like to bundle those repaints into the main review, but, well, I don’t always own them when I review a figure the first time, so I guess I just have to follow them up this way.  How about that?

THE FIGURE ITSELF

Sauron (the repaint) was added to Toy Biz’s X-Men line in 1993-1994, right around the same time as Series 4 and 5 of the line, alongside a whole assortment of repainted figures.  Of all the figures present amongst the repaints, his was the oddest choice, given how minor the character was, but perhaps they were looking to tie in with the show’s second season, where he actually had a pretty important role to play.  The figure stands about 5 inches tall and he has 10 points of articulation.  He’s 100% the same sculpt as the standard release of Sauron.  It was a decent sculpt for the time, and honestly holds up pretty alright.  Still not sure exactly what he’s wearing, but what are you gonna do?  The change to this one’s paint is honestly pretty subtle; instead of orange pants, his are gold with a little bit of black.  It’s super minor, but I actually quite like it.  It’s nice that they actually added, rather than just doing a straight palette swap.  Interestingly, the card back prototype showed him with red shorts, a figure that, to date, no one has any evidence actually existed.  As with his original release, Sauron was packed with a big ol’ club.  Yay big ol’ club.

THE ME HALF OF THE EQUATION

I wound up going back to the toy show where I’d gotten my standard Sauron the next year, in hopes of finding more Toy Biz stuff.  I discovered it was rather slim pickings that year, but managed to fish a handful of the repaint figures out of a loose figure bin.  Sauron was one of those figures.  He’s not a bad figure, but the two offerings do feel slightly redundant when in the same collection together, I suppose.

#3101: Han Solo with Smuggler Flight Pack

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

HAN SOLO with SMUGGLER FLIGHT PACK

STAR WARS: POWER OF THE FORCE II (KENNER)

“Many labels can be applied to Corellian-born Han Solo: pirate, gambler, smuggler and Rebel hero. It is doubtful that the last title would have applied at all had he not agreed to transport Ben Kenobi, Luke Skywaker and two droids to Alderaan in his Corellian freighter, Millennium Falcon. After unwittingly becoming part of a mission to rescue Princess Leia, Solo was drawn more and more into the cause of the Rebel Alliance, becoming one of the most significant figures involved in the rebellion against the Empire. He played an essential role in the Battle of Yavin, and led the strike-team on Endor’s moon that facilitated the destruction of the new Death Star. He escaped form countless dilemmas simply because of his daring and skill as a blasterslinger and pilot – talents he retained form his days as a smuggler/gambler. He also retained a couple of other things, one of them being his trusty smuggler pack, a tool which served him extremely well during inner-atmospheric piracy jobs.

Designed and built by Solo with the help of Chewbacca, this item is basically a weapons-jet pack with a huge mechanical grappling claw attached at its base for massive lifting and cargo transport. It was assembled from old swoop parts, discarded starfighter pieces, and construction-machinery robotics. Much like the Millennium Falcon itself, the pack does not appear impressive or dangerous – concerning its appearance Solo often becomes defensive: “Well it isn’t supposed to look pretty!” However, the swoop engines provide break-neck propulsion while two repulsors engage a silent hover mode that allows atmospheric flotation up to a maximum of one-hundred meters depending on the cargo. The pack allows Solo some flexibility; he can dock the Falcon and then speed in below sensors with the smuggler pack, picking up any cargo or booty before transferring it back to his ship. Twin laser cannons, appropriated from a badly damaged stock light freighter, swing over his shoulders to create a high-powered defense module. The grappling claw has magnetized pinchers which can be de-magnetized at the flip of a switch. It is extremely durable and able to lift objects weighing up to fifteen metric tons.”

Well, with a bio like that, I hardly need much of an intro here, now do I?  Especially after more or less covering the weird Deluxe line-up thing for Power of the Force II with last week’s review.  So, you know, this one’s very similar to that, but it’s Han instead of Luke.  How about that?

THE FIGURE ITSELF

Han Solo with Smuggler’s Flight Pack was part of the first Deluxe Series of Kenner’s Power of the Force II line, added in 1996.  The figure stands about 3 3/4 inches tall and he has 6 points of articulation.  Much as was the case with the Stormtrooper and Luke, Han’s sculpt is quite similar to the Series 1 Han.  Not exactly one of the line’s finest or anything, but it’s got this sort of charming quality to it, I suppose.  The only change of note between the two releases is the addition of a second vest to the torso.  You know, in case the single vest wasn’t enough, right?  Gotta add that second.  But certainly don’t add any extra sleeves.  That would be too much.  His color work is more or less the same as the earlier release.  There’s some orange and silver added for the new vest.  Doesn’t feel super Star Wars-y, but it’s not un-Star Wars-y, either.  The application’s pretty clean and consistent, so that’s good.  The big selling point for all of these was the big gimmick accessory, and that’s consistent with Han here.  He’s got his “Smuggler’s Flight Pack,” which the bio presents as a pre-existing thing that’s sort of a signature of Han, despite the whole “not showing up anywhere other than this toy ever in the whole canon of Star Wars” thing.  But, you know, there it is.  It’s big, it’s goofy, and it makes it virtually impossible to keep the figure standing.  I guess it’s kind of fun, but it also really doesn’t feel like a Han sort of thing.

THE ME HALF OF THE EQUATION

Deluxe Han really never appealed much to me as a kid.  It’s only recently that I’ve really started picking them up, and it’s really only because of ease of access.  Han came into All Time as part of a larger collection, and the seal on the bubble had broken, so he was a rather easy grab.  He’s goofy, and odd, but he’s still an intriguing look at that road not travelled.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#2975: Web-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

WEB-MAN

MARVEL LEGENDS (HASBRO)

“A product of Dr. Doom’s Twin Machine, Web-Man is the opposite of Spider-Man in every way.”

And hey, we’re right back to the Marvel Legends.  Seriously, I hope you guys aren’t expecting a prolonged break from Legends soon, because I’m legitimately booked up through the new year with these suckers.  I blame Hasbro.  And also myself.  I did buy them all, after all.  Before I delve into the rest of this week’s very timely movie-themed Spider-Man figures, I’m going to first take a small detour into Spider-Man’s very first live-action adaptation, courtesy of The Electric Company.  The Electric Company had a live-action segment, “Spidey Super Stories,” which was itself the subject of its own adaptation in comic form back at Marvel.  Spidey Super Stories ran 57 issues, with all sorts of slightly more specifically kid-aimed stories.  In issue 25 of the series, Spidey faced off against Dr Doom and his Twin Machine, leading to the creation of Web-Man, Spidey’s opposite in every way.  Fortunately for our hero, this opposite set-up proved quite helpful in defeating Web-Man, since the opposite of Spidey being a genius made Web-Man a blithering idiot.  You know, for kids!  The most outrageous thing about all of this is that it all ends with Web-Man getting an honest to god action figure 44 years after that first appearance.  I certainly wouldn’t have put money on it.

THE FIGURE ITSELF

Web-Man is a one-off Fan Channel release under the Retro Collection sub-line of Marvel Legends.  He started showing up at retail about a month or so ago.  The figure stands 6 1/4 inches tall and he has 34 points of articulation.  Curiously, despite being in the Retro line, which had its own updated Spidey last year, Web-Man is yet another case of Spidey variant that *doesn’t* make use of the updated parts at all.  Instead, he’s using the ANAD 2099 and Spider-UK head combo that we saw on the first Gamerverse Spidey.  It’s certainly not a bad combo at all, and it matches up well with the mid-70s Spidey look, but it’s admittedly kind of funny that Web-Man, whose whole thing is being a copy, isn’t actually a copy of the standard Spidey from the same line.  In fact, he’s not a copy of any standard Spidey, since this exact combo of parts is still yet to be used for basic color scheme Spidey.  Speaking of color scheme, that’s this guy’s whole selling point, since he’s got a reverse color set-up.  It generally works pretty well, although, again, we’ve not actually gotten a Spidey with this specific shade of blue.  It matches the comics design, though, so I get why they went with it.  Web-Man is packed with three sets of hands, which I’m very happy about, because I get bummed out every time we get a Spidey variant without the full range.  Yay for the full range of hands.

THE ME HALF OF THE EQUATION

Web-Man’s one of those rather goofy concepts that you never expect to see, at least not released in any explicit sense.  Like, maybe a one-off Spidey variant in some toyline might swap the colors for a laugh, but they’re not gonna actually call him Web-Man, right?  But, well, then they did, and now here we are.  He’s a very simple figure, with a very basic premise, but he actually does it quite well, and I’m honestly all about it.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#2928: Nightwing

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

NIGHTWING

BATMAN: THE CAPED CRUSADER (SPIN MASTER)

I think I’m finally hitting an okay pace when it comes to these Spin Master DC figures.  I mean, it’s at least a consistent one.  Sure, that consistent pace is, like, one figure per month, but that’s still something, right?  This year’s theme for their Batman line is Bat-Tech, which is outfitting all of the Caped Crusader’s allies and foes with new variant costumes that are all techy.  Largely, I’m picking up the actually new characters, but there are a few intriguing variants mixed in, and I’m always a sucker for a good Nightwing.  So, you know, here we are.

THE FIGURE ITSELF

Nightwing is part of the sixth assortment of Spin Master’s Batman: The Caped Crusader line, which is the second assortment under the “Bat-Tech” banner.  This is the same assortment that included the previously reviewed Batgirl, making Nightwing a logical inclusion.  The figure stands about 3 3/4 inches tall and he has 17 points of articulation.  Structurally, the figure is the same as the prior Spin Master Nightwing.  It’s a reasonable enough sculpt, not perfect, but certainly serviceable, and the consistency isn’t a bad thing.  In order to fit with the “tech-y” nature of the set, Nightwing’s color scheme has been tweaked.  It keeps the same basic Nightwing feel, but he’s molded in a smoky translucent plastic, which is fun, and he’s got a bunch of the tech details like we saw on Batgirl and Batman.  They’re fun little details, and I also enjoy the slight change-ups to his basic suit’s layout of details.  Nightwing is packed with the same baton pieces that the prior release included, but in sparkly blue plastic instead.  He also gets two different guns, one of which has a piece to allow for hooking it up to his back.  Guns feel a bit in contrast to Nightwing’s usual loadout, but I guess they’re not real guns, so that’s better maybe?  I’m only gonna use the batons anyway, so it doesn’t really matter.

THE ME HALF OF THE EQUATION

After getting Batgirl, I found myself really liking the Bat-Tech set-up as a whole, and, I am, as noted before, a sucker for a good Nightwing.  Max wound up finding this one during one of his stops, so he was nice enough to enable me pick one up for me.  He’s not drastically different from the last one, but he’s still a lot of fun, and keeps the spirit of Spin Master’s whole set-up really going.

#2863: Hologram Iron Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

HOLOGRAM IRON MAN

MARVEL LEGENDS (HASBRO)

“Ever the innovator, Tony Stark takes flight in holographic form, a computer-generated avatar and an enduring force for good.”

Back during the Iron Man 2 tie-in line, there were a *lot* of Iron Man armor repaints, many of them under the heading of “concept”.  One of them was a re-deco of the Mark VI armor in a translucent blue with white detailing, pattered on a holographic representation of the armor from the film.  It was a pretty cool looking figure, and I even reviewed on this very site, quite early into my run.  Apparently, Hasbro was pretty big on the idea, too, since they’ve decided to bring it back around for the larger scale with Legends.  How about that?

THE FIGURE ITSELF

Hologram Iron Man is figure 6 in the Ursa Major Series of Marvel Legends.  He’s the third and final Iron Man variant in the assortment.  It’s technically an all-comics assortment, but I don’t believe that this particular design has actually been used specifically in the comics.  It just seems to be more of a conceptual thing, just like the earlier one.  The figure stands 6 1/2 inches tall and he has 29 points of articulation.  Structurally, this figure is using the molds of the Civil War Mark 46.  It’s not the same as the Mark VI used before, but we don’t really have a properly upgraded Mark VI mold available right now.  This one’s got a fairly similar, and is, quite honestly, one of Hasbro’s best movie Iron Man molds.  I’ve always been quite a fan, and it has a good distinctive look that works for the single color molding this figure calls for.  The figure is obviously molded in all blue plastic, which gives it that holographic look, but to enhance that, there’s some white detailing, which is honestly more involved than I’d expected.  I really like it, and it gives him a lot of pop.  The figure was packed with two sets of hands, in fists and repulsor, plus two effects pieces.  The repulsor hands predate the move to get rid of the full wrist joints, so these have the full range of motion, which makes me very happy.  Also included is the head of the Ursa Major Build-A-Figure.

 

THE ME HALF OF THE EQUATION

At three Iron Man variants, this set does feel a little Iron Man heavy, and I think this guy might just be one too many.  If one needs to go, he certainly feels the most extraneous.  That said, I had the smaller version of this because he looked cool.  I have this one for the same reason.  It’s a cool concept that makes for a cool toy.  I definitely dig that.  He’s nothing if not a fun toy, which does at least give him more merit than some of the more boring and drab variants that have been forced on us more recently.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.