Tag Archives: X-Men

Flashback Friday Figure Addendum #0007: Savage Land Angel

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , , ,

Another Friday, another Flashback Friday Figure Addendum!  This one’s another look back at Toy Biz’s epic line of 5-inch Marvel figures, with Savage Land Angel!

The 90s X-Men line!  Now there was a line.  I haven’t really looked at this line yet on the site, aside from the Original Members Boxed Set, which wasn’t actually part of the line.  But in the 90s, the X-Men were the big thing.  They had a TV show, their comics sold millions, and they had one of the most comprehensive toy lines to date.  There was a Cho’d action figure for God’s sake!  Towards the end of the line, they began to run out of new characters to release, so they started doing these theme waves with rereleases of the main characters.  One of those theme waves was a set of figures based on the X-Men’s many trips to the Savage Land.  It featured figures of the X-Men in tattered “Savage Land” uniforms.  Today, I’ll be looking at the Angel figure from that line.

THE FIGURE ITSELF

So, as I said above, Angel here hails from the Savage Land series of Toy Biz’s 5-inch X-Men line.  He stands roughly 5 inches tall and has 11 points of articulation.  If you read the review of the Fallen, you’ve seen a lot of this figure before.   He shares all but his head, arms and feet with that figure.  The head was actually one that saw frequent reuse over at Toy Biz, and I know this wasn’t the first figure to use it, but I honestly don’t know what was.   Anyway, it works fine here, though it might be a bit scowly for a pre-Archangel Warren Worthington.  The figure’s look is mostly done through paint, which depicts a tattered version of Angel’s blue and white costume from the silver age*.   It’s cool to see this costume here, but a bit disappointing that the costume never got a proper release.  Angel at one point featured a pair of (very small) wings, a gray vest with an X-logo, and some weird claw thing that attached to his wrist, but I lost most of those pieces many years ago.

THE ME HALF OF THE EQUATION

I got this figure on one of my many trips the KB Toys outlet in Rehoboth Beach.  I was very excited to get it because Angel figures were a bit of a rarity in the 90s.  I know I really liked this guy, and for reasons I can’t fathom at this point, I know he spent a lot of time in my Ghostbusters Ecto-1.

Well, that’s not an awful review.  Still a bit shorter than the average review nowadays, but not horribly so.  I actually listed off all of the relevant information for the figure, and even referenced re-used parts and everything (though, rather amusingly, the Fallen pieces I referenced weren’t even discussed in my The Fallen review).

When I last reviewed this figure, he was missing both of his wings and the little wrist claw, both of which were returned to him during The Find.  The wings are rather on the small side, but detailed nicely enough.  I’m not really even sure what the claw supposed to be, but there it is.  Still missing is the grey cloth vest.  Also, I didn’t mention this previously, but each figure in the Savage Land series included a creature figure of some sort.  Angel included a small Sauron figure, which I still haven’t found.  Maybe he’ll turn up one of these days and I can write a *second* addendum.

#1222: Havok & Storm

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

HAVOK & STORM

MARVEL MINIMATES

havokstormmm1

Hey, it’s been a month since I reviewed any Minimates.  That’s statistically too long a period given the make-up of my collection.  Guess I better review some more.  Today, I once again turn the Marvel license, looking at some comic-themed ‘mates (a bit of a rarity these days), based on more classic designs no-less!  So, let’s dive head-in and take a look at Havok and Storm!

THE FIGURES THEMSELVES

Havok and Storm were released in the 14th series of TRU-exclusive Marvel Minimates.  This pair in particular was designed to complete the Outback X-Men line-up released in Series 47 of the main line, which hit right around the same time.  Why they chose to pack these two together is anyone’s guess, since it’s not like Havok and Storm have a lot of history, but I’m not really going to complain.

HAVOK

havokstormmm2This marked Havok’s third entry as a Minimate, and his second comic-based ‘mate.  He’s more or less wearing the same costume as his first comic ‘mate, though if you want to get *really* technical, that ‘mate was in his ‘60s costume and this one is in his ‘80s one.  Not a lot of differences, but they’re there.  Also, it had been almost a decade at this point since his first ‘mate’s release, which would have made completing the team a bit difficult for newer collectors.  The figure is built on the usual ‘mate body, so he’s about 2 1/4 inches tall and he has 14 points of articulation.  He’s got one add-on piece for his mask, which is a separate piece this time, as opposed to being just painted on.  I like the sculpted design a bit better, and I also appreciate that they’ve gone for the slightly more splayed design of the antenna he was sporting in the ‘80s, thereby making him more specific to this team line-up.  In terms of paint, he’s a step-up from his predecessor in some ways, but a step down in some others.  The mask is rather on the sloppy side, which is frustrating.  Also, he’s saddled with a screaming expression again, although at least this time you can swap out the head under the mask for a calmer one for another ‘mate if you want (I find that the Series 38 Iron Fist works pretty well).  The added muscle detailing on the torso and legs is definitely nice, as is the clean detailing his energy tracker on his torso.  I do somewhat miss the printed energy detailing of the last figure, but the accessories make up for that.  He included a brand-new effect piece to simulate his powers, which is the same piece that would be modded to be Banshee’s scream effect.  He also includes a spare hair piece for an unmasked look.  He does NOT include the pictured display stand; I just forgot that wasn’t always a standard piece when I was taking this picture.

STORM

havokstormmm3As much as I love Havok, there’s no denying that this set’s heavy hitter is Storm.  This marked Storm’s seventh time as a ‘mate.  Unlike Havok, this isn’t a repeat of an earlier design, although it shares a few design elements with a few prior ‘mates.  This is her post mohawk look, but her pre-90s-shoulder pads look.  It doesn’t quite have the staying power of a lot her designs, but it’s decent enough, and shown up in a few toy lines over the years.  The figure uses add-ons for her hair, glove cuffs, and cape.  The cuffs are re-used from Battle-Damaged Spirit, but the rest of the pieces were new.  Both pieces are decent enough.  The hair doesn’t have the ears sculpted like most ‘mate hair pieces, which is a little odd, but it’s otherwise pretty solid.  The cape is okay, but seems a little on the stiff side.  In terms of paint, she’s not bad.  The glossy sheen on the black is a nice touch, and I like the bright grey detail lines.  The gold could probably stand out a bit more, and the skin tone could do with a more organic hue, but the application’s all pretty great.  Storm includes a pair of electricity effect pieces (the same ones included with six of her other ‘mates), as well as a flight stand.

THE ME HALF OF THE EQUATION

Okay, so Havok’s one of my favorite X-Men, so as soon as these figures hit, I made it a point to get this set.  I ordered them from TRU’s online store, which, as with most of the times I’ve done so, was quite an ordeal.  Of note, neither they, nor the other set I ordered (Heather Hudson & Box, for those who are curious) was actually listed under their name, instead being given the generic title of “Marvel Minimates 14: Figure.”  Fortunately, a kind soul over at the Minimate Multiverse provided the group with the SKUs, so I was able to determine which set I was ordering that way.  Havok is awesome.  A definite improvement over the prior release.  Storm is alright; hardly my go-to version of the character, but a solid ‘mate nonetheless.

#1208: Colossus

Posted by Ethan Wilson in Reviews and tagged with , , , ,

COLOSSUS

MARVEL SELECT

colossusms1

Wow, it’s been a really long time since I’ve reviewed a Marvel Select figure. <Looks back at reviews>  Holy crap, it’s been 506 reviews since I last looked at a Marvel Select figure.  That’s quite a while.  Well, why not pull something out of the archives, then?  Today, I’ll be jumping over into the world of Marvel’s merry mutants, the X-Men, and looking at one of my personal favorite members of the team, Piotr Rasputin, aka Colossus.

THE FIGURE ITSELF

colossusmswilsonColossus is the 75th figure in Diamond Select Toys’ Marvel Select line, released in 2012.  He’s one of only two figures to hit that year, largely due to the focus on a certain team of Earth’s Mightiest Heroes who happened to have a movie released that year.  He continued the trend of X-Men based upon the early ‘80s line-up of the team (the other X-Man from 2012, Storm, also followed this trend).  The figure stands almost 9 inches tall (he’s a big guy) and he has 30 points of articulation.  He’s one of the earlier instances of near-Marvel-Legends levels of articulation for a Select figure, and it’s genuinely impressive just how much movement they were able to get into this guy, given his mass.  Colossus sported an all-new sculpt.  It doesn’t appear to be based on any particular artist’s rendition of Piotr, but it does lean a little more modern in terms of design sensibilities than a lot of Colossus figures do.  This is most notable in the face, which lacks the usual rounded features in favor of something more sharp and angular.  While I can’t say it’s my go-to Colossus look, it’s certainly not a bad looking rendition of the character.  The body continues some of the stylization present in the face; earlier renditions of Colossus tended to be more consistent in build, but this guy’s definitely favoring his upper body.  He’s almost sporting Bruce Timm anatomy (though he’s definitely not Bruce Timm styled).  There’s one oddity about the body sculpt, specifically the upper body: the upper portion of his tunic is separate from his actual torso.  While it’s not out of the ordinary for such an element to be a separate piece, the fact that it’s not actual fixed in place in any way is slightly odd.  There’s a fully sculpted torso under there, which leads me to wonder if there was a scrapped variant of this figure sporting his outback costume.  Regardless, you’ll only really notice the separate tunic piece when picking the figure up, and it stays in place well enough.  It also adds an extra dimension to the figure, which is always cool.  In terms of paint, Colossus is very nicely rendered.  The colors are all nice and very vibrant, and everything is very cleanly applied.  There’s a nice subtle accenting to the yellow portion of the tunic, which keeps it from being too plans.  I also quite like the metallic work, especially on the arm bracers.  A lot of the X-Men Select figures included a section of the Danger Room as a display base, and Colossus was no exception.  Well, generally speaking.  He comes with a spike wall, clearly meant to be from the Danger Room, but it’s not exactly a stand, since it doesn’t really support him.  Still, it’s a cool piece, and a nice addition to the armory.

THE ME HALF OF THE EQUATION

Colossus was my second Marvel Select figure, picked up during Cosmic Comix’s Biggest Sale of the Year in 2012.  I had initially been planning to pick up Ultron during that year’s sale, but I got a subscriber coupon a week prior and got him then.  I still wanted to take advantage of the sale, and I’ve always liked Colossus, so this guy was my next choice.  The old Marvel Legends figure has always been one of my favorites, so this guy had quite a bit to live up to, and I think he did just that.  He’s really just a very fun figure.

#1195: Cannonball & Domino

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

CANNONBALL & DOMINO

MARVEL LEGENDS (HASBRO)

cannonballdomino1

Hasbro’s early days with the Marvel license were an odd time.  Truth be told, they didn’t really come into their own with the product until somewhere around Iron Man 2, which was a good three years into their run with the license.  Until then, there were some weird experiments, intermixed with just sort of copying a lot of Toy Biz’s stuff, mostly when it came to Marvel Legends.  The first two series of their Legends were almost entirely chosen and designed by Toy Biz, which gave them a bit of time to figure out some of their own stuff for the half-formed Series 3 assortment.  The first two series hit in early 2007, and the third wouldn’t hit until almost the end of the year.  Hasbro filled the gap between two and three with a handful of exclusives.  Today, I look at Cannonball and Domino, one of those exclusives.

THE FIGURES THEMSELVES

Cannonball and Domino were a Walmart-exclusive two-pack.  They were released alongside the similarly exclusive Cable and Marvel Girl two-pack in the summer of 2007, as only the third round of Walmart-exclusive Marvel Legends.  Both characters were at something of a low-point in terms of relevance, but and were actually the first X-Force alumni outside of Cable and Deadpool to join the line.

CANNONBALL

cannonballdomino3Sam Guthrie is one of the more successful characters from his era of comics.  Cannonball started out as a member of the New Mutants and not only make it all the way through that series’ run, heal also transferred into its follow-up X-Force, and then moved onto the main X-Men team, where he was a pretty prominent character for a while.  He fell back into obscurity for a bit, but was recently brought on as one of Jonathan Hickman’s Avengers, which seems to have gone pretty well for him.  This figure is loosely based on his first X-Force design (loosely due to the necessities of parts re-use, which I’ll touch on in a sec).  He stands about 6 1/2 inches tall and has 39 points of articulation.  That’s a lot of movement, but, as you can see, it’s sort of at the cost of the sculpt.  The sculpt, it should be noted, originally hails from Toy Biz’s Johhny Blaze version of Ghost Rider.  It was heralded as a great sculpt at the time, but it’s sort of specifically tailored to Blaze, since it’s skeletally skinny.  It’s not that Cannonball hasn’t frequently been depicted as rail thin (because he was for most of his early career), but this seems a bit extreme even for him.  It probably doesn’t help that when he was with the X-Force he was usually depicted as only being a little smaller than Cable.  The point is, this figure makes Sam look more than a little emaciated.  For what it’s worth, the costume details do match up surprisingly well with his X-Force togs, and there’s a lot of really fun detail sculpted into this figure.  I can get why they wanted to re-use the parts, it’s just a bit questionable, that’s all.  As far as new pieces go, Sam got a new head, which captures his slender mug pretty well, as well as a weird dicky sort of piece that slips over GR’s exposed neck and shoulders.  They do their job well enough, and also fit pretty well with the body (though the neck is a bit jarringly smooth).  One last thing about the sculpt: Sam is a testament to why you should avoid soft rubber on action figures.  There’s rubber for the upper torso, and while mine has held up okay (only two very small tears), I’ve seen others that weren’t so fortunate. The paintwork on Cannonball is decent enough.  It takes his color scheme from the comics and translates it into something a bit more consumable by the human eye.  The application is mostly pretty clean but there’s some slop here and there, especially on the white piping of the jumpsuit.  Cannonball included no accessories.

DOMINO

cannonballdomino2Domino’s not a character I really have that much affinity for, so I don’t know a whole lot about her.  She’s got luck-based powers, but it was the ‘90s so that translated to “carries a gun.”  Everything seemed to translate to “carries a gun” in the ‘90s.  Domino’s had her fair share of looks over the years (mostly because no one can make up their minds about how to draw her), and this figure seems to be based on her look from the early ‘00s.  She stands about 6 1/4 inches tall and has 33 points of articulation.  Despite all that articulation, she still can’t sit, thanks to being built on a body from Toy Biz’s period of useless hip joints.  Bleh.  She uses the body of the X-Treme Rogue from TB’s 2006 X-Men line.  It’s actually a pretty good match for the art I’ve been able to find of Domino in this costume.  The proportions are still quite on the wonky side, and don’t get me started on whatever the heck’s going on with the torso (she moves at the boobs and the abdomen?  That’s odd), but Toy Biz certainly produced worse, and Hasbro put out worse the same year as this figure’s release.  So, this isn’t awful.  The head and hands were unique to this figure.  The head is a pretty decent, no-nonsense head, and looks like the later interpretations of Domino.  The hands are sculpted to hold her guns, which is a nice thing to see on a character whose whole thing is having guns.  Domino also got a new add-on piece for her belt, which is fixed with a holster for each leg.  The holsters would probably limit hip movement, but the actual hip joints beat them to it, so not a huge loss, I guess.  Domino’s paintwork is alright.  There’s some really strong work on the head, but the jumpsuit exhibits a lot of slop, in very obvious places.  Domino was packed with a pair of pistols (I seem to have misplaced one of mine…)

THE ME HALF OF THE EQUATION

When these figures were released, my dad was after the Marvel Girl from the other set.  When he finally found them, our local Walmart was already clearancing them, so he went ahead and grabbed this set as well, on the off chance that I might want it.  As luck would have it, I was still into collecting action figures that particular day, so I did want this set!  Who would have guessed?  Despite not knowing a whole lot about him, I’ve always had a soft spot for Cannonball, and this figure was no exception.  I can point to all the figure’s flaws, but I still really like him.  Domino?  She’s just sort of there.  She’s not a bad figure, but I just feel nothing about her, so she just came along for the ride.  Of course, now that I actually have a Cable, she’s not quite as out of place, so that’s good!

cannonballdomino4

#1157: Cyclops & Wolverine

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ULTIMATE CYCLOPS & ULTIMATE WOLVERINE

MARVEL MINIMATES

ultcyclopswolv1

Minimates sure have come a long way.  There was a time when we all thought the line might just get those first three series and nothing else.  As such, many of the characters and designs represented in those early series were influenced by what was timely.  For instance, the earliest X-Men Minimates weren’t really based on any of the classic iterations of the team, but rather the just recently launched Ultimate X-Men, who also had the added benefit of having a slightly closer resemblance to the X-Men of the movies.  The characters released were also much more top tier, including today’s focus figures, Cyclops and Wolverine!

THE FIGURES THEMSELVES

Cyclops and Wolverine, like several of the other earliest ‘mates, were available in a few different ways.  The first way was as part of Series 3 of the main Marvel Minimates line, where Cyclops was paired with Jean Grey and Wolverine was paired with Storm.  They were also part of the TRU-exclusive five-pack with Storm, Logan, and Sabertooth.  The pair I’m looking at today are part of the first group of Target-exclusive ‘mates, which is the only time these two were packed together.

CYCLOPS

ultcyclopswolv3Poor Cyclops gets no respect, but the Ultimate universe certainly tried to give him his due.  On the plus side of things, he had one of the less sucky redesigns of the Ultimate ‘verse, since it pretty much stuck to his usual costume roots.  The figure stands about 2 1/2 inches tall and has 14 inches tall.  He’s built on the pre-C3 base ‘mate body, so he’s got those weird long feet.  He’s got add-ons for his hair/visor and his belt.  Both pieces are certainly good for the time.  Not quite as detailed as later ‘mates would be, but also not as simplistic.  This is definitely one of the figures where elegant simplicity comes into play.  I like how they’ve summed up all the basic elements of Cyclops with as few details as possible.  The paintwork on Cyclops is decent enough.  What’s there is mostly pretty sharp, though there are a handful of misplaced lines, especially on the boots.  Obviously, he lacks the musculature and finer detailing that we’ve come to expect on more recent stuff, which look a little off.  Of course, thanks to the darker colorscheme, it’s a lot less of an issue here than it is on other ‘mates from the same time period.

WOLVERINE

ultcyclopswolv2Wolverine is no stranger to Minimates, but this was one of the first two he ever got.  It’s kind of strange to think that neither of his first two ‘mates featured his signature mask.  It’s worth noting that this figure is sporting Ultimate Wolverine’s second costume design.  It was a sensible choice, since it not only incorporates more of his classic costume’s design elements, but also fits better with the rest of the team.   Like Cyclops, he’s built on the pre-C3 body.  He has add-ons for his hair and belt, as well as clawed hands.  The hair isn’t the classic Wolverine style hair, but that’s actually accurate to the comic.  It’s a decent enough sculpt, and it would later see re-use on the first version of Quicksilver.  The claws are an older version of the hands, and are a little more rudimentary than those of the most recent Wolverines.  They’re not awful, but the improved versions were definitely warranted. The paint work on Wolverine is decent overall, but not without issue.  Most noticeably, there’s just a splotch of fellow on his right hand and wrist, which just looks rather odd.  Still, the overall appearance is decent enough.

THE ME HALF OF THE EQUATION

Cyclops was actually one of my earliest Minimates (as part of the first three two-packs I picked up), but that was the specialty release with Jean.  Over the years, I lost a number of pieces to both of them, so they’ve been incomplete for a while now.  I ended up finding this set at Player’s Choice, a gaming and collectibles store in the local mall, a few weekends ago.  Since I was looking to replace Cyclops and I never actually owned this Wolverine, I figured it was worth it to pick them up.  They’re not a bad set.  Sure, there have been lost of subsequent releases of both characters, but for Cyclops especially, it’s truly hard to top that first release in terms of memorability.

#1129: Wolverine & Thunderbird

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WOLVERINE & THUNDERBIRD

MARVEL MINIMATES

wolvthunderbird1

Happy Thanksgiving to all of my American readers out there!  And, to all my non-American readers, happy Thursday!  Hey, there’s nothing wrong with some general positivity, right?  Today, I’m wrapping up my Giant Size X-Men Minimates, which includes Thunderbird, the team’s Native American member.  Him being half of the set I’m looking at today is really just a coincidence, but it works out, I guess.  And hey, it gives me a chance to post this Bulletin Bits strip, featuring Thunderbird’s brother Warpath!

mmbb28

Alright, so let’s have a look at Thunderbird and his pack-mate Wolverine!

THE FIGURES THEMSELVES

Wolverine and Thunderbird are the fourth and final set in Series 68 of Marvel Minimates.  These two make for an interesting pair.  While Thunderbird famously died during the team’s second mission (spoiler on a 41 year old  comic, I guess), Chris Claremont has gone on record that both Thunderbird and Wolverine were on the chopping block for issue 95’s fatality.  Wolverine was ultimately only saved by having a slightly more defined power set than Thunderbird.  Imagine how different the X-Men might have been had those roles been reversed!

WOLVERINE

wolvthunderbird3Wolverine is no stranger to Minimates, with this particular ‘mate being his 59th entry in the line.  It’s also out fifth version of his basic Tiger-Stipe look, but it’s the first one in a little while, and, as with the others in this series, he’s specifically patterned after Dave Cockrum’s illustrations.  The figure is about 2 1/2 inches tall and he has 14 points of articulation.  He has add-ons for his mask, shoulder pads, clawed hands, and boots.  All of these pieces are from the Series 28 version of this costume.  While that was 7 years ago, the pieces still work, so the re-use is more than warranted.  The mask could, I suppose, be a little more streamlined, as it was in the ‘70s, but at this scale it’s negligible.  Wolverine’s paintwork is pretty great all-around.  The colors are a good match for the classic Wolverine, and the line work does a very nice job of translating Cockrum’s drawings into the ‘mate form.  I will say, he definitely looks better with the mask on than without.  There’s something about the unmasked look that’s a little off.  Of course, I’ve got plenty of unmasked Wolverines, so a good masked one is fine by me.  Wolverine includes an extra hairpiece for his unmasked look, as well as a clear display stand.  It feels rather on the light side, especially compared to some of the others in the series.  At the very least, a spare set of normal hands should be standard, and I would have also appreciated the hanging mask piece from the Series 47 Wolverine, just to give him some extra display options.

THUNDERBIRD

wolvthunderbird2This marks Thunderbird’s second time as a Minimate, after his figure in the GSXM boxed set.  Given his relative obscurity, it’s not really much of a surprise.  That being said, that figure’s been rather outdated for quite some time now, so an update is very much appreciated.  The figure uses add ons for his hair, sleeves, belt, and boots.  The belt is a standard piece, but the rest of the parts are new to this figure.  They look pretty good, and certainly do a nice job of capturing Thunderbird’s look from the comics.  This new method of construction works a fair bit better than the way the costume was handled not he first Thunderbird ‘mate.  The paint work on Thunderbird is pretty well handled.  The colors are certainly vibrant, and I appreciate that his skin tone is a little different from the rest of the figures in the series.  I also appreciate the Cockrum-style shading on the various parts of the costume.  It takes him from a potentially “meh” ‘mate to a pretty interesting one.  Thunderbird’s only accessory is a clear display stand.  That being said, I can think of pretty much nothing else that a Thunderbird figure really should have, so he doesn’t feel unnecessarily light (the fact that he has quite a few new pieces helps a fair bit too).   

THE ME HALF OF THE EQUATION

This is probably the set from this series I was the least excited for.  I’ve got plenty of Wolverines, and as cool as Thunderbird is, he’s never been near the top of the list of figures I needed.  In hand, I do really like both of them to be sure.  Wolverine will be my definitive version, and Thunderbird definitely feels like a solid ‘mate all-around.  That being said, compared to the more parts heavy sets in the series, these two do feel like the come up a bit short, especially since half of the set is a character we’ve gotten 58 times before, in a costume we’ve gotten four times before, built entirely out of re-used parts.  This set could definitely have used a little something extra to help it pop.  It’s not bad at all, but it is a little less exciting than the others.

anadxmenmates

#1128: Colossus & Nightcrawler

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

COLOSSUS & NIGHTCRAWLER

MARVEL MINIMATES

nightcrawlercolossus1

The X-Men line-up presented in Giant Size X-Men #1 undoubtedly gave us some of the more memorable X-Men.  Obviously, there’s the likes of Storm and Wolverine (even if he did appear elsewhere first), but it also gave us both Colossus and Nightcrawler.  While they may not be quite as big as some of the others (and poor Colossus has been woefully overlooked when it comes to the cartoons), they’re still pretty popular with the fanbase at large.  They also happen to be two of my favorite X-Men, so packing them together is pretty awesome!

THE FIGURES THEMSELVES

Colossus and Nightcrawler are part of Series 68 of the Marvel Minimates line, which is based around GSXM #1.  Both figures are based on their Dave Cockrum-designed looks, but it’s worth noting that these two stuck with these particular looks for a good long while.

COLOSSUS

nightcrawlercolossus3Colossus has had a few different ‘mates over the years.  That being said, this is the first one to directly retread on previous territory, being a pretty straight re-do of the GSXM boxed set version (the alt look for the Series 47 version came pretty close, but was actually based on his slightly tweaked ‘90s look).  The figure is built on the standard ‘mate body, and as such stands about 2 1/2 inches tall and has 14 points of articulation.  Colossus features add-on pieces for his hair, wrist bands, torso cover/belt, and boots.  The hair and gauntlets were both used on the 47 Colossus; they worked well there and they work well here.  The torso piece and boots are both new to this ‘mate.  It’s interesting: after getting several attempts at handling the torso piece a “better” way than the GSXM set’s version, they just went back to essentially the same style.  I’m certainly not complaining!  I do like the subtle hints of musculature on the chest piece, which make him seem larger than the others, but prevents him from looking puffy.  I’m not 100% sold on the boots.  Something about the knee pads seems off to me.  There’s certainly been worse, though.  Colossus’s paint is very impressively handled.  The colors are nice and bold, and he really pops.  The line work is very sharp, and the details, the face in particular, are a very good rendition of Cockrum’s Colossus.  I was very happy to find out that the actual torso has full detailing, allowing you to display Colossus shirtless, if you so choose (some people like that sort of thing).  Colossus’s only accessory is a clear display stand, which feels rather light.  Obviously, the parts for an un-armored Piotr would make him essentially a second figure, but the fastball special hand should have been included at the very least.  Oh well.

NIGHTCRAWLER

nightcrawlercolossus2Amazingly enough, this is only the third time we’ve gotten Nightcrawler (and the third time we’ve gotten this exact costume too, no less).  I thought the Excalibur set version had him pretty well covered, but it’s been over five years since that one was released, so another version feels warranted.  Nightcrawler has  unique hands and feet, as well as sculpted add-ons for his hair, shoulder pads, and tail. The tail remains the same piece used on both prior Nightcrawlers (and his dad Azazel), but everything else is new to this figure.  Personally, I prefer the Wolverine-style shoulder pads from the last Nightcrawler to the ones featured here (I like the neck to be left unencumbered as much as possible), but they’re a decent enough piece, I suppose.  The hair, hands, and feet are all improvements over what we’ve gotten before (the hands especially, since the prior hands are huge) and are just well sculpted all around.  The ears could maybe stand to be a little more pronounced, but that’s the only real negative I’ve got.  Nightcrawler’s paintwork is pretty good, but not without its issues.  The basics are all pretty good.  The color palette is bright and bold, and the colors accent each other well.  His basic head has a frightening expression we haven’t yet seen on a Nightcrawler ‘mate.  It’s a good rendition of the earlier, scarier NIghtcrawler, and it makes this figure a little more specific to those appearances (thus giving the figure a bit more reason to exist).  Unfortunately, the application of a lot of the paint, especially the red, is a little uneven.  The red detailing on the edges of the gloves and boots is far too thin, resulting in an obvious line where the underlying colors switch from white to black.  That, coupled with the fact that the glove trim stops abruptly for the inner half of the arm, makes him look a little unfinished.  Nightcrawler includes an extra head with a more jovial expression (my preferred of the two faces), a cutlass (finally!), a “bamf” stand, and a clear display stand.  All of these are pretty cool, except the “bamf” stand, which is more than a little frustrating, since the peg is too small for either foot, and it also requires him to stand with both feet together, a rather un-Nightcrawler stance.

THE ME HALF OF THE EQUATION

Though I missed out on the GSXM set, I wasn’t missing either of these characters, having picked up their subsequent releases.  Colossus was a pleasant surprise.  There was something missing from the ‘mates since the GSXM version, which I think has been found again with this guy.  He’s the perfect embodiment of the character.  I don’t see him being replaced any time soon.  Nightcrawler is a more mixed figure than Colossus.  I’ve never really cared for the original ‘mate, but the Excalibur version was pretty solid.  This one adds some nice stuff (the extra head, the new hands and feet, and the cutlass), but also takes a few hits (the paint, the effects base, and, if I’m being really picky, the shoulder pads).  The good outweighs the bad, but he could still be a bit better.

#1127: Storm & Sunfire

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

STORM & SUNFIRE

MARVEL MINIMATES

stormsunfire1

One of the more intriguing aspects of the “All New, All Different X-Men” presented in Giant Size X-Men #1 was the diversity of the team.  This was especially poignant in comparison to the original team.  While the X-Men (and Mutants in general) were supposed to represent groups who were oppressed, shunned, and otherwise mistreated, the actual original team was made up entirely of upperclass, good-looking, and generally well-off whites, which ever so slightly hindered the message the creators were trying to put forth.  When the new team appeared with members representing cultures from all over the world, it really helped to sell the inclusiveness of the whole idea, and redefined how the team was portrayed moving forward.  Many of these new characters became some of the most memorable characters in the franchise’s history, including Storm, who I’m looking at today.  Then there’s Sunfire, who is…less memorable….

THE FIGURES THEMSELVES

Storm and Sunfire are part of the 68th series of Marvel Minimates, which is GSXM-themed.  Both characters are based on Dave Cockrum’s renditions of the characters from Giant Size X-Men #1, though, like with Banshee yesterday, Sunfire’s design was just a slight tweak on his design from earlier in the original run.

STORM

stormsunfire3Aside from Wolverine, Storm is easily the most memorable of the characters brought onto the team in GSXM #1 (and she’s definitely the most memorable of the characters *introduced* in GSXM #1).  To date, she’s held a prominent role in every cartoon adaptation, and had a role in five of the six movies (and she even cameoed in the sixth).  That’s important!  She’s also had 9 prior Minimates, covering most of her prominent looks, which is better than can be said for quite a few Marvel characters.  Being built on the standard Minimate base body, Storm stands about 2 1/2 inches tall and has 14 points of articulation.  Storm gets add-on pieces for her hair and cape.  Both of these pieces are new to this figure, and they look quite good.  Some figures of this storm design downplay the length of her hair, which is always a little frustrating, so I was grad to see this one doesn’t.  The basic cape included here is decent enough, if perhaps a little rigid.  Fortunately, for those who want Storm’s cape to be a little more flowy, there’s also a much larger, flying cape included.  It’s definitely my preferred piece of the two, and it really sets this Storm apart from the others we’ve gotten.  Storm’s paintwork is pretty solid all around.  All the colors are great matches for what’s seen on the printed page, and I really like the glossy sheen on the black parts of her costume.  This figure probably has some of the best paintwork in the series.  In addition to the extra cape, Storm also includes an extra head (w/ pupils), two electricity pieces, a flight stand, and a clear display stand.

SUNFIRE

stormsunfire2Sunfire here pairs up with Banshee on the whole “left off of the cover” business, meaning he was also left out of the original GSXM boxed set.  Unlike Banshee, this is actually his very first Minimate (and only his fifth action figure in general).  Sunfire’s never been all that prominent, since he quit the team after only an issue, and never really came back, so no real action figure coverage for him.  He’s probably not helped by his costume have the rising sun motif, but there it is.  The figure gets an all-new add-on piece for his weird looking mask.  It does a decent job of trying to make sense of that goofy thing.  Could this be the first time that a Minima’s lack of nose actually makes his costume make more sense?  The rest of the details are rendered via paint, which is all pretty solidly handled.  The white parts could be a little cleaner, and the orange could maybe stand out a bit more, but the line work is really great.  Under his mask is an appropriately angry Shiro Yoshida.  That guy was alway pissed.  For accessories, Sunfire gets an extra hairpiece for an unmasked look, two flame effect pieces for his hands, an orange-tinted flight stand, and a clear display stand.

THE ME HALF OF THE EQUATION

Ever since missing out on the GSXM set, I’ve been waiting on a good classic Storm, and when this one was announced, I was pretty psyched.  I can’t say I’m disappointed with the final product.  Definitely the best version of the character yet.  And, getting Sunfire after so long is also pretty darn cool.  He’s no one’s favorite character, but he’s an important piece of the team’s history nonetheless, and it’s great to finally have him!

#1126: Cyclops & Banshee

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CYCLOPS & BANSHEE

MARVEL MINIMATES

bansheecyclops1

In the summer of 2003, Marvel Minimates was launched, with Series 1-3 all hitting pretty much simultaneously.  It was an interesting mix of characters and eras to be sure, but that’s a story for another review.  Series 3 gave us our first taste of the X-Men, presenting them in their Ultimate X-Men incarnation, which was a little bit of a letdown for the more classic comics fans in the audience.  Fortunately, in January of the following year, they got back to the X-Men, this time offering up a set based on Giant Size X-Men #1, perhaps the quintessential “classic” X-Men.  Now, 13 years later, they’ve returned back to GSXM #1, this time offering up a whole series of two-packs based on the team.  Today, I’ll be looking at the first two-pack from the set, leader man Cyclops & Banshee!

THE FIGURES THEMSELVES

Cyclops and Banshee are part of the 68th Series of Marvel Minimates, which hit towards the end of September.  Both characters are based on their Dave Cockrum designs from the early issues of his and Chris Claremont’s run on X-Men, though, in the case of Cyclops and Banshee, both designs are slight tweaks of the Werner Roth designs for the characters.

CYCLOPS

bansheecyclops6When it came time to rebuild the team, Cyclops was the one point of overlap between old and new (though Jean Grey would find her way back in short time, and Beast and Angel would both pull stints as recurring members.  Only Iceman really stayed away), kept on as the new team’s field leader.  It gave him a sense of seniority he hadn’t really had with the prior incarnation of the team.  This particular Cyclops design has graced the Minimate style twice before, but the last time was as part of an exclusive two-pack in 2005.  Minimates have made a lot of progress since then, so the update to what is probably Scott’s most prominent design is a much appreciated one.  The figure stands about 2 1/2 inches tall and he has 14 points of articulation, as is the norm for any figure built on the standard ‘mate body.  Cyclops has additional parts for his cowl/visor and his boots.  The boots are the standard cuffed boots, and they do the job well enough.  The mask is a new piece, and it does quite a nice job of both capturing the feel of Cockrum’s illustrations of Cyclops’ visor, while also still fitting in well with the general Minimate aesthetic.  The rest of Scott’s details are handled via paint.  The overall application is pretty good, but there are a few issues, such as his left glove not getting enough coats of yellow to totally cover the underlying blue, thereby giving him a slightly green color.  Also, like a few previous X-Men, his belt buckle still has some traces of yellow left at the very bottom, which is a little frustrating.  That being said, there’s a lot to like here.  The shading on the blue sections of the costume is very near perfect, and really sells this as a late 70s Cyclops, as well as adding a lot of depth and dimension to the design.  While the gold visor has occasionally been something that bothers me on Cyclops figures, this is one time I really don’t mind, as Cockrum always went out of his way to indicate the visor was metallic.  I also appreciate the little red visible “eyes” in the visor, as they signify this is undoubtedly a Cockrum Cyclops, not Byrne.  Under the mask, there’s a face that’s a pretty great recreation of the unmasked Cyclops we see near the beginning of GSXM #1.  I really like the extra attention to detail on this one.  Cyclops includes a spare hairpiece for his unmasked look and a clear display stand.  The AvX and ANAD Cyclopses both included an extra mask with an optic blast attached, which certainly would have been nice, but given the number of extras included with the other figure in the set, it’s not the worst thing ever.

BANSHEE

bansheecyclops3Banshee was one of two members of the new team to have already appeared in X-Men prior to to GSXM#1, so he wasn’t one of the new characters paraded on the oh so famous cover.  By extension, he was also left out of the GSXM boxed set back in 2004, and left unreleased until Series 60, last year.  And even then, that was in his Strike Force uniform, making this particular ‘mate 13 years in the making.  Alright!  Guess my focusing on the positive worked!  Banshee gets add-ons for the hair, collar, and his wings.  The hair and collar come from the “Strange Tales” Morbius. They work decently enough.  I personally prefer the hair used on the last Banshee ‘mate, but the Morbius piece is a good match for Banshee’s appearance bansheecyclops5earlier in the run.  The wing pieces are new.  The slip over the wrists, and when positioned correctly, look like he’s using them to glide on the air.  Pretty cool new pieces, definitely.  The paintwork on Banshee is pretty good in general.  There are some fuzz edges here and there, and there’s a weird sort of film on the pelvis piece, but otherwise, the line work is sharp, and the colors are nice and bold.  Banshee’s default face is screaming, which is pretty well handled.  He also includes an extra head, with a more playful grin, a perfect recreation of Cockrum’s depictions of Banshee off-duty.  I can’t begin to tell you guys how excited I am to have a Banshee that includes an extra, non-screaming head.  How this is the first version of the character to do such thing, I’ll never know.  In addition to the extra head, Banshee also includes the cape and sonic scream piece from the last Banshee, as well as a flight stand and a clear display stand.

THE ME HALF OF THE EQUATION

For quite some time, one of my main wants from Marvel Minimates was a GSXM-themed series.  For a number of stupid reasons, I never owned the original boxed set, so there was this sort of a hole in my collection.  So, I was pretty thrilled by the announcement of this set. Moreover, I’ve been waiting for this Banshee pretty much since 2004, so I’m very happy to have him finally.  He’s definitely the Banshee I’ve been waiting for.  Sorry Strike Force Banshee, looks like you’re being replaced (well, maybe I’ll keep that hair).  The John Byrne Cyclops from 2005 has been my go to version of the character for over ten years, and he’s become increasingly outdated as the line’s moved on.  I was eagerly awaiting the new version, and I’m very happy with the final result.  This one’s going to be hard to top moving forward!

bansheecyclops9

#1104: Cyclops

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CYCLOPS

X-MEN: METALLIC MUTANTS (TOY BIZ)

cyclopsmetallic1

I’ve discussed Toy Biz’s larger 10-inch-scaled Marvel figures in the past.  Essentially, since Toy Biz did the prototypes for their successful 5-inch line as two-ups, they had an easy time re-using those sculpts for a line of slightly cheaper 10-inch figures (though, interestingly, the line was originally billed as a deluxe line of figures.  It was only later, when they decided to focus more on building as many figures as they could out of a limited pool of parts that it became “cheap”).  Toy Biz’s 10-inch X-Men line, like it’s smaller scale counterpart, was the most successful of the initial lines, even managing to get its own spin-off line, Metallic Mutants, where certain figures were re-released with metallic color schemes.  Today, I’ll be looking at the Cyclops figure from that line.

THE FIGURE ITSELF

cyclopsmetallic2Cyclops was from the first series of X-Men: Metallic Mutants. The whole Metallic Mutants line was available exclusively at KB Toys (who would also become the exclusive retailers of the entire 10-inch line a few years later).  The figure is about 10 inches tall and he has 9 points of articulation, which was a whole extra point more than his 5-inch equivalent had.  The figure is a straight repaint of the basic 10-inch Cyclops, who was himself patterned on the sculpt of Cyclops II from Toy Biz’s main X-Men line.  The sculpt is a little bit different.  He lacks the light-up feature of the smaller figure, which results in him getting the neck articulation the smaller figure lacked.  Aside from that, the sculpt is pretty much the same.  It’s okay for the time, but certainly isn’t one of Toy Biz’s stronger sculpts.  Due to the light-up nature of the smaller figure, the torso was made a bit larger to house the battery compartment, and that’s still seen here.  While the legs seem to match up okay with the larger torso, the arms and head feel rather under-sized by comparison, which makes him look rather odd overall.  Each piece of him seems fine on its own, but as a whole he looks a bit patchwork.  I will admit, there’s a certain quaintness to the sculpt that I appreciate, though.  The big deal on the figure, of course was the paint.  It’s certainly metallic, there’s no denying that.  The costume looks cool in the metallic shades, but what sort of throws him off is the decision to do his skin and hair in the same gold as the “yellow” bits of the costume.  Clearly, Toy Biz caught on to this being weird, since the second set of Metallic Mutants just had the metallic colors on the costumes, not the actual faces.  Cyclops included a blaster thing, in the same gold as used on the body, which is cool I guess.

THE ME HALF OF THE EQUATION

As hokey as this guy is, I’ve actually always wanted one.  Growing up, I had the little product booklet that came with the TB Galactus, which had these guys all pictured in it, and I always wanted Cyclops in particular.  I ended up finally getting this guy for my birthday this summer from my parents, who bought him from 2nd Chance Toyz.  Is he weird and goofy and strange?  Yes.  Do I love him? Emphatically yes.