Monthly Archives: July 2021

#2827: Black Widow & James Rhodes in Mark II Armor

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BLACK WIDOW & JAMES RHODES IN MARK II ARMOR

MARVEL MINIMATES

In light of Black Widow finally getting her long overdue solo film over this weekend, it’s always kind of interesting to look back at her beginnings, at least in terms of the MCU.In addition to introducing Widow, Iron Man 2 helped to set the stage for the larger MCU as a whole.  As such it was a film rather jam-packed with characters, each with a number of distinct looks.  The corresponding Minimates were quite all-encompassing, with the specialty and TRU assortments each pulling their weight to get as many of the primary players out there as possible.  It was through this venture that Widow got her first MCU-based ‘mate, alongside a variant of Rhodey.

THE FIGURES THEMSELVES

Black Widow and James Rhodes in Mark II Armor were part of the first TRU assortment of IM2 tie-ins for Marvel Minimates, which hit just before the film’s release in the spring of 2010.Both figures included here were totally exclusive to this pack-out, and would remain that way going forward.

BLACK WIDOW

Though her role in the finished product ended up a little smaller than some were anticipating, Widow is still one of the most important things to come out of Iron Man 2.  She had a pair of movie-based Minimates to come out of it.  This one is the first, and the one based on her actual, proper “Black Widow” design. The figure is built on the standard ‘mate body, so she’s about 2 1/4 inches tall and she has 14 points of articulation, Widow is markedly less sculpted than her pack-mate, but she still makes use of a handful of sculpted add-ons for her hair, widow’s stingers, and belt/holster. The hair piece was shared with the other Widow variant, and is a very well-detailed, exceptionally crafted recreation of Widow’s longer locks from the film.  The widow’s stingers are the same ones used on the Champions boxed set Widow.  They were good there and they’re just as good here.  The combined belt/holster piece is the only truly unique piece on this figure.  It accurately recreates what she was wearing in the film, but its design means it restricts the hip movement on the left leg, which is a little annoying.  That said, it’s far less obtrusive than earlier holster designs, which is a plus.  The paintwork on Widow is pretty decent stuff.  The face has a passable likeness of Scarlet Johansson.  Not the best DST’s done on the MCU Widow’s but certainly a good start.  The expression’s a little bland, though it’s hardly the end of the world. The detailing on her uniform is pretty solid stuff, with linework for all the piping.  She’s even got the SHIELD insignias on her shoulders; the proper classic ones from IM2, as opposed to the more Ultimate inspired one from later films.  Widow’s only accessory is a small handgun, which was in common usage around that time.  It’s a fine piece, but she does feel a little light.

JAMES RHODES IN MARK II ARMOR

There were no shortage of Rhodey figures in the IM2 assortments.  He got quite a bit of focus in the movie, and his three main looks were each represented.  His time in the unmodified Mark II armor is short-lived, but it is during one of the film’s best sequences, so its place in this assortment is certainly earned. The IM2 armored figures represent DST’s learning curve with sculpting on ‘mates.  These guys lost a lot of the connection to the base body, which makes them feel sort of alien amongst the other ‘mates.  Structurally, this figure is identical to Series 35’s Iron Man Mark IV.  Same helmet, torso, upper arms, gloves, and legs.  In turn, this means he shares his gloves and legs with the Marks II and III from Series 21.  This figure was *supposed* to also share his torso piece with those two, but due to a mix-up he ended up with the Mark IV piece, which is inaccurate to the film.  It’s not a huge difference, but it’s enough to be frustrating.  Paint on the Mark II is all rather basic.  He’s mostly just a straight silver, with detailing on the eyes and arc reactor, as well as a fully detailed James Rhodes face under the helmet (the same one on both the standard War Machine and the Uniformed Rhodes) and a look into the inner workings of the suit on the underlying torso block.  It’s pretty decent work overall, but it’s unfortunate that he doesn’t have the same rivets detailing that was present on the first Mark II Minimate. The Mark II is packed with a spare helmet with the face-plate flipped up.  It’s the same piece used for the other armors in this same assortment, and it’s a really cool idea.

THE ME HALF OF THE EQUATION

I snagged this set from TRU when it first hit. I was quite determined to get it, because I really wanted this Black Widow. Fortunately, it didn’t prove to hard for me to get, so that was nice. Widow was undoubtedly the star attraction of this particular set.  While she’s been outpaced by more recent variants, there’s still a lot to like about this figure. Rhodey in the Mark II armor is a variant that would have been pretty cool if the execution had been there.  Unfortunately, it really wasn’t, and as such, the figure ends up rather underwhelming.  Fortunately, he’s got his pack-mate to carry him.

#2826: Ultra Boy

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ULTRA BOY

LEGION OF SUPER HEROES (DC DIRECT)

In the early days of the Legion of Superheroes, one of their by-laws for new recruits was that there could be no duplication of powers.  Today’s focus, Jo Nah of the planet Rimbor (who also got his powers after being swallowed by a space whale, in a reference to the biblical Jonah), aka Ultra Boy, got by on the technicality that, while his powers technically duplicated powers already covered by other members of the team (super strength, speed, flight, flash vision, and pentra-vision), he could only use one of them at a time, which is at least a different gimmick, I guess?  Of course, let’s not get into how they still managed to keep Superboy, Supergirl, and Mon-El on the team at the same time or anything….honestly, there was probably more than a little bit of prejudice and personal bias going into exactly when those by-laws came into effect; early Legionnaires were all kind of bastard people.  They got better.  Sort of.  Anyway, I was talking about Ultra Boy, so I should probably continue that, and not keep discussing how genuinely awful the Legionnaires are as people.  Even though they really are.

THE FIGURE ITSELF

Ultra Boy was released in Series 3 of DC Direct’s Legion of Superheroes line, which marked when the line starting spreading a little more into the depths of the team.  Not terribly, so, of course, since it’s not like Ultra Boy is that crazy obscure, but he’s the sort of character that doesn’t tend to get picked for the more paired down team line-ups for, like, guest spots and other media appearances.  The figure stands just shy of 6 inches tall and he has 11 points of articulation.  Ultra Boy has quite a few parts in common with the Brainiac 5 figure, as by this point DC Direct had decided to institute more of a base body for this line.  The torso and legs are the same, as is the right hand.  The head and belt pieces were all-new, and the arms were a set designed to be a tighter fit than those used on Brainy and Mon-El, and were shared between this guy and Star Boy in this particular series.  All in all, I still think the base body works pretty well, and it certainly looks good here.  The new head is also one of my favorites, as it really seems to capture the ’60s Ultra Boy appearance, and just feels a little more unique than some of the others in the set.  Ultra Boy’s paint work is nicely applied, very clean, and very bold.  As with Brainy, he’s entirely painted, with no molded colors showing through.  It does aid in him looking clean, but there was always more potential for scuffing on this line of figures.  Fortunately, my Ultra Boy’s not so bad.  Ultra Boy was not packed with any accessories.

THE ME HALF OF THE EQUATION

Fair warning: I’m going to be getting into some more post-Jess discussion here.

Ultra Boy is a figure that I always wanted when he was new, but who is actually one of my more recent acquisitions, because he just doesn’t show up nearly as often as the rest of the figures in this set, for whatever reason.  I actually quite vividly remember the exact day I got him, though perhaps not for the most happiest of reasons.  This figure came into All Time Toys, along with a whole ton of other DC Direct figures, on June 19th of last year.  It was the Friday before Father’s day, almost exactly a year from when I’m writing this review.  I know this because while I was at work that day, I got a call from Jess, who had just recently had a small surgical procedure done, and had just been told she would need to be moved into observation at the hospital.  She spent the next three days in the hospital, and I spent them right next to her, missing out on my family’s small plans for Father’s Day.  We didn’t know it was cancer yet, and wouldn’t find out for another two weeks, but it was the first indication that things were more serious than we realized.  So, I suppose, looking back, a year removed now, with Jess having been gone for 13 days by my time, this figure carries a rather odd weight, as the very last figure I purchased before my world changed.  It’s quite a bit of weight to place on one item, but my life in the last two weeks has seen me placing a lot of weight on seemingly small things.  And, I imagine, that’s where I’ll be for a little while longer.  And maybe that’s not the worst thing in the world.  As it stands, Ultra Boy’s at least a nice figure, so maybe not a bad choice for one that remains a token of how things were.

#2825: U.S. Agent

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

U.S. AGENT

MARVEL LEGENDS (HASBRO)

“After being stripped of the Captain America title, John F. Walker’s spirit is shaken and he takes on a new mantle: US Agent.”

John Walker is always sort of a necessary evil when it comes to the Captain America mythos.  He’s kind of got to be there to remind you of the things that Steve Rogers isn’t, and never should be.  The Ultimate Universe had no John Walker, and it kind of showed, because the end result was a Steve Rogers that wound up with a lot of John’s traits.  In the case of the MCU, they really hammered home that comparison to Steve, by actively making John a character that almost feels like Steve at first glance, but who quickly becomes very not Steve very suddenly.  It was an intriguing story, though perhaps not an overly pleasant one.  But, much like the comics, John’s not meant to stay in the Captain America role, and the show ends with him transitioned into the role he’s been in for about four decades in the comics: US Agent, the guy who can be what Captain America isn’t.

THE FIGURE ITSELF

US Agent is figure 5 in the Disney+-themed assortment of Marvel Legends.  Given’s John very prominent role within the story, he’s a natural choice for the line-up, though it is obviously a slight change-up that he’s in his US Agent garb, which he only wears for a single non-action scene in the final episode, rather than the Captain America costume he wears for most of the show (which itself got a Walmart-exclusive release).  This gets into what I was saying with the Loki review, where I mentioned the set’s tendency to go with the looks with more staying power, which is what I’d say is true of this look over John’s Cap look.  The figure stands a little over 6 1/4 inches tall and he has 31 points of articulation.  His articulation scheme is on par with the more recent Steve Caps, which feels appropriately consistent.  There are probably some areas where he could stand to have a little more range, but for the most part, he does what he needs to do.  His sculpt is, rather predictably, shared with the John Walker Cap figure.  The two designs are very similar, and it only makes sense, really.  It’s a pretty good sculpt for the most part, capturing Walker’s slightly larger build, as well as all of the smaller details in the suit’s design.  I’m not big on the molded gun in the holster, especially at this point in the line, but there may be some licensing things going on there.  Unfortunately, the decision to do a complete parts share means that his helmet’s not screen accurate, since John’s US Agent helmet doesn’t have the A-Star on the forehead. It’s too bad they couldn’t do that one new piece, but I have to wonder if it may have been an early design element.  On top of the sculpt issue on the helmet, John’s paint also takes a slight hit.  They’ve clearly just used the same paint masks as the Cap figure, but with some of the colors changed out.  For the most part, this is fine, but in the case of his torso, it means that he’s got smaller red straps over a black chest, when going by the show, the chest part should be red, and the straps should be white, making for that true US Agent look a la the comics.  This ultimately bugs me more than the helmet, because this isn’t even a cost of tooling issue; it would literally just be changing out the paint apps.  This further adds to me wondering if maybe the US Agent costume wasn’t as different in the original designs, and that’s what we’re seeing here.  John is packed with two sets of hands, one set in fists, the other gripping, as well as another piece to the Captain America wings.  Even if his gun is molded into the holster on the figure, it’s still again a shame that the gun wasn’t also included.  I’m pretty sure we’ve already got the mold for it and everything.

THE ME HALF OF THE EQUATION

I’ve always liked John Walker as a concept (though I don’t actually like John Walker as a guy, because he’s generally not the best), so I liked that they brought him into the show, and I liked that they allowed him to have his proper arc.  Wyatt Russell was fantastic in the role, and I look forward to seeing more of the character, even if I don’t actually look forward to seeing him.  While his Cap design was cool, I didn’t really find myself drawn into the exclusive, because, for me, he’s not Cap, he’s US Agent.  This figure has its few issues of accuracy, but even so, I do still really like him as a figure.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2824: Winter Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

WINTER SOLDIER

MARVEL LEGENDS (HASBRO)

“Thrust back into the real world, Bucky is forced to figure out how to become James Barnes again, all while facing demons from his past”

In the comics, Bucky Barnes’s arc after his return as the Winter Soldier had him rather quickly recovering from the brainwashing and becoming one of Cap’s allies again.  For the MCU, his path has been a slower, and ore turbulent one, with his initial return even ending with a bit of uncertainty about what was to happen to him.  Obviously, it’s not been a huge surprise that he’s been generally following his comics-counterpart’s path, but just in a slightly more involved way.  The Falcon and the Winter Soldier delves into the trauma that lies within Bucky’s mind as a result of his time as the Winter Soldier, as well as showing us the true struggles he faces on his path back to “normality.”  It also gives a very convincing rationale in-universe about why the MCU version of Bucky has no desire to be Captain America, in contrast to his path in the comics.  At the end of the series, his contentment in his own role shows how far he has come as a character, and really feels very earned within the context of the story that’s been building.

THE FIGURE ITSELF

Winter Soldier is figure 4 in the Disney+-based assortment of Marvel Legends, and is the first of the figures from the set based on The Falcon and the Winter Soldier, which is the primary focus of this assortment.  While Bucky spends a lot of the show’s run time in rather average civilian attire, the figure opts for his true combat look from the show, which plays prominently into some of the early in-show missions, as well as the finale.  It’s a design that plays pretty heavily into his classic Bucky design, moreso than his Winter Soldier look, which fits well with the arc his character is going through, as well as fitting with the general evolution of his designs post Winter Soldier, which have slowly morphed him back to that more The First Avenger look for him.  The figure stands about 6 1/4 inches tall and he has 31 points of articulation.  The ab-crunch on Bucky feels a little bit limiting, but otherwise, it’s a pretty good articulation set, and he benefits from having the pin-less construction for both his elbows and knees.  The last Winter Soldier we got has some parts re-use going on, but this one is an all-new sculpt.  It’s a pretty darn nice one, at that.  The head is by far the best Sebastian Stan likeness we’ve gotten so far, and it’s also nice to finally get a proper new sculpt for his new robot arm (though it is a shame it’s not more easily removable).  In terms of paint work, Bucky’s pretty decent overall, and actually tries a bit more than a lot of more recent offerings.  The base work is all pretty clean and straight forward, and the gold on the arm looks pretty spiffy.  By far the best work is on the face, which even manages to get his stubble on there rather believably.  The jacket is an interesting set-up, because they’ve attempted to do a little bit of variance on the shades of blue, as if it’s maybe a little worn in.  I’m not sure it quite works they way they were hoping for, but it’s also not as bad as it could be.  Maybe the changes between the shades could be a bit more subtle, but I’m happy to see them at least trying something different.  There’s also some slightly accenting on his hair, giving it a slight bit of brown, which looks quite nice.  Bucky’s packed with two sets of hands, one set open, the other in fists, as well as part of Captain America’s wings.  Just getting the hands does seem a little light, and it feels like he’s forever cursed to not actually get any proper firearms, but on the other hand, his arc in the show also has him angling himself a bit more away from those sorts of things, so I guess there’s that.  Still, I would have liked to see maybe something else.

THE ME HALF OF THE EQUATION

Winter Soldier figures tend to be a bit of a mixed bag for Legends, where there’s always something that really holds them back.  This one doesn’t really have that going on.  While the accessories are maybe a little light, there aren’t any glaring issues with the figure, and he just feels like a really solid representation of the character.  I also just find myself liking this representation of the character in general, so I’m kind of glad that this is the one where Hasbro really put in the effort for the character.

Winter Soldier was purchased from my friends at All Time Toys.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2823: Loki

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LOKI

MARVEL LEGENDS (HASBRO)

“Mere moments after his escape during the events of Avengers: Endgame, Loki is apprehended by the TIME VARIANCE AUTHORITY (TVA) and arrested for his crimes against the ‘sacred timeline’”

After the back-to-back extravaganza that was WandaVision and Falcon and the Winter Soldier, we had a little bit of hiatus, before jumping into the next show, Loki, which follows the alternate timeline version of the God of Mischief that escaped during Endgame.  As of this writing, I’ve only seen the first episode of the show, so I don’t know exactly where it’s going to be going, but I do like the look of things.  Loki is the show with the least toy coverage at this point, with only one version of its main character on the market (though Owen Wilson’s Mobius was just revealed to be getting a Target-exclusive figure as well).  I’m going to be taking a look at that one today.

THE FIGURE ITSELF

Loki is figure 3 in the Disney+-themed assortment of Marvel Legends.  He’s patterned on his appearance in the show, specifically his garb while working for the TVA…or at least that’s what I assume this is.  So far, we’ve seen his Avengers gear, and the prison jumpsuit.  But this looks right for working for the TVA, so I’m going with that.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  Loki is built on the updated suit body first used for Nick Fury.  It’s slightly taller nature makes it a better fit for Hiddleston, and it’s honestly just a little better proportioned, so I get the desire to re-use.  Unfortunately, it does have a few details, most notably the sculpted shoulder holster, which don’t match up with Loki’s look from the show.  The holster is totally hidden, of course, but it’s a weird choice leaving it there.  Loki gets a new head, tie, and jacket piece.  The head is probably our best Hiddleston Loki to date from Hasbro.  It’s still not spot-on, but it does feel at least a little bit closer.  I think not trying to contend with any removable head gear really helps there.  The jacket and tie are nice enough pieces; pretty basic, but they do what they need to.  The paint work on Loki is definitely on the brown side of things, which matches to the show aesthetic.  The face print really works here, but there are otherwise some sort of odd choices.  The neck line is uneven and doesn’t follow the sculpt, and the belt buckle is just totally different than what’s sculpted (probably going for something more accurate to the show).  It’s also weird that the holster is left totally unpainted.  Like, I know it’s not supposed to be there, but not painting it doesn’t magically make it less obvious that it’s there.  Loki doesn’t get any accessories of his own, but he does get Redwing, the backpack, and the flight stand for Captain America, so that makes up for it a little bit, I guess.

THE ME HALF OF THE EQUATION

Going into this assortment, we knew there would be a Loki, but exactly which of the looks from what we’d seen in the trailers was still up in the air.  I will admit, when this one was shown off, I was a bit letdown.  From the looks of things, this may end up as his most prominent design on the show, but it’s hard to say it’s very visually interesting, and clearly most prominent isn’t as important as best visual when it comes to the rest of the assortment.  Loki’s not a bad figure, and I do at least like his new head sculpt, but he definitely feels like the weakest of the bunch.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2822: The Vision

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

THE VISION

MARVEL LEGENDS (HASBRO)

“Harnessing the power of density manipulation with computer precision, Vision is a hero whoa defies the very laws of nature.”

One of the things that I’ve liked quite a bit about the MCU is how it has a real talent of taking concepts that work from story lines that don’t, and putting those concepts into stories that do work.  “Vision Quest” presents some interesting ideas about Vision’s true nature, as well as the very cool visual of an all-white Vision as something of a blank slate appearance, but never really takes the story anywhere truly intriguing or worth while.  WandaVision‘s use of the The Vision as an antagonistic force, and his subsequent face-off against Wanda’s Vision which culminates in their discussion of just what it is that truly makes a person a person feels like a payoff that rings very true for the character and the arc he’s had up to this point.  And, it gave us another look for Vision, which is rather convenient for Hasbro, since, otherwise, there’s no real changes from the last two times they released him.

THE FIGURE ITSELF

The Vision is figure 2 in the Disney+-themed assortment of Marvel Legends.  He’s the second of the two WandaVision figures included, both of which are based on the show’s final episode, The Vision, of course, being based on the antagonistic all-white version re-activated by Hayward to hunt down Wanda and destroy her Vision.  The figure stands 6 1/4 inches tall and has 32 points of articulation.  The Vision is built from a lot of re-used parts, which is really kind of expected, since there are certainly quite a few similarities between his two designs.  The body is the same as the Infinity War version, which, while not perfect, is still a pretty decent sculpt.  There are one or two small details that should probably be different for full screen accuracy, but it’s not far off.  The head appears to be different, or at the very least a little bit tweaked from the prior release.  To my eye, the face has a slightly better likeness of Bettany, but it could just be the change of color playing tricks on my eyes.  The cape is very definitely an all-new piece, and I quite like it.  It sits a little closer to the body at the chest, which looks more natural, and it’s also got this pretty cool draping appearance over his shoulders, which just feels very classically Vision to me.  In terms of paint, this guy’s pretty light on application, but that’s really expected.  What’s there is generally pretty good, although I feel like the wrists and ankles are a slightly too dark shade of off-white.  The cape just being clear seems off to me, as I was expecting it to be at least  a little bit white, going by what we see on-screen.  But, this is a problem we’ve run into with standard Vision as well, so it’s not really anything new.  The Vision is packed with two sets of hands, in open gesture and fist poses, as well as two more parts to Captain America’s wings.  Given that they dropped the extra hands from the Endgame Vision release, this does feel like a slight step up.

THE ME HALF OF THE EQUATION

During the show, I was wondering how they were going to justify actually doing more Vision figures, but once it was confirmed that Westview Vision wasn’t in the original’s body, I had a sneaking suspicion we’d see this design crop up.  It’s a cool call-back to the comics, and a much better version of the story than what we originally got.  In terms of the figure, this one is rather by the numbers, but that’s not the worst thing, and he ends up being a pretty nice figure in his own right.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2821: Scarlet Witch

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

SCARLET WITCH

MARVEL LEGENDS (HASBRO)

“Wanda Maximoff’s abilities of telekinesis, energy manipulation, and neuroelectric interfacing allow her to read thoughts and give her targets walking nightmares.”

Forgive me if I opt to find a story about someone’s struggle to come to terms with a devastating loss of a loved one, and subsequent efforts to do everything in their power to hold onto some vestige of that person very relatable at the moment.

Since Elizabeth Olsen’s Wanda Maximoff and Paul Bettany’s Vision were introduced into the MCU, I’ve been excited by the prospects of building their relationship further.  It was touched on in both Civil War and Infinity War, but wasn’t the main focus in either, so I was ecstatic when the pair were given a TV show to further explore their characters and their relationship.  WandaVision was a really fantastic show, which has given the MCU a very stable footing moving forward with its overall narrative, as well as showing that Elizabeth Olsen is very much a bankable talent to keep central to the MCU, even in light of the exit of the films’ bigger name stars.  Her performance as Wanda was nothing short of amazing, presenting a very human character going through very real emotional turmoil, while also building her up to be, very believably, one of the strongest characters in the Marvel universe, as she damn well should be.  Now she’s got herself another action figure, and it’s a cool one, and I feel like she really deserves that.

THE FIGURE ITSELF

Scarlet Witch is figure 1 in the first Disney+-themed assortment of Marvel Legends.  She’s one of the two WandaVision figures in the line-up, and she’s based on Wanda’s proper Scarlet Witch appearance from the show’s finale.  For the first time, we got a more proper adaptation of something more akin to Wanda’s comics get-up, and boy was that really cool to see.  In general, it’s one of the best costume designs in the MCU, and showcases how well they’re advancing in their abilities to translate costumes from the page to the screen.  It’s got all the proper flair of Wanda’s classic costume, without looking silly at all.  I really dig it.  The figure stands about 6 inches tall and she has 27 points of articulation.  The articulation scheme on Wanda is pretty nicely handled.  It’s not like it’s revolutionary or anything, but it does what it needs to, and it does it well.  Near as I can tell, Wanda’s sculpt is all-new, with no parts shared with her prior figure.  I thought maybe the hands might be, but the details on the gloves are just a little bit different.  It’s quite a nice sculpt overall.  The likeness on the face is just a little bit closer to Olsen than the prior release, and the hair has a nice, dynamic feel to it, without being too over the top.  The body has a fairly realistic looking build, and the articulation is worked in pretty well.  The details on the costume are all pretty sharp, and they mostly match up pretty closely to the on-screen costume.  I think, technically, the tops of the gloves go a little bit too high on her arms, but it’s a very minor detail.  The figure’s paint work is generally pretty impressive.  She’s got the printed face, which is quite life-like, as well as some pretty decent accenting on her hair.  The rest of the application is also all pretty clean.  Technically, there are a number of parts of the costume that should be a bit darker, but I think it’s also very possible that some of it really comes down to the exact lighting in the show.  I’m happy with the color scheme presented here, and it’s not like it’s very far off if it is at all.  Wanda is packed with two sets of hands (one in standard color, one in translucent), two energy effects, and a piece of Captain America’s wing.  I know some people were hoping they might throw in the cape she was sporting in the final stinger, but it’s admittedly not part of the main chunk of the episode where this look appears, so I understand why they may have left it out.  Still wouldn’t have minded getting it, of course, but not having it doesn’t ruin the figure for me.

THE ME HALF OF THE EQUATION

WandaVision was a very impactful show for me.  It was one I was looking forward to as soon as it was announced, and by the time it actually dropped, the subject matter had become very poignant for some of the struggles I was personally going through.  In light of the last month, it’s become even more so for me, and I have particularly been holding onto Vision’s dialogue about grief being love persevering the last few days.  All of this has served to make Wanda an incredibly relatable character for me, which gives this figure a little extra weight.  She’s a very nice figure of a very nice design, from a very nice show.  I really like her.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2820: Frontline Captain America & Bucky

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

FRONTLINE CAPTAIN AMERICA & BUCKY

MARVEL MINIMATES

With the MCU really entering it’s post-Endgame slate, and building up some of the more minor characters, it’s sort of nice to take a step back and look at how far some of these characters have come.  Before they were respectively a hero who is the idol of millions and all-around very hard to replace icon and a sleeper-agent assassin-turned repentant hero, Steve Rogers and James “Bucky” Barnes were just two best friends, dragged into Hydra’s off-shoot of World War II.  Fortunately, DST gave us a pairing of the two before all those changes, just so we can reminisce!

THE FIGURES THEMSELVES

Frontline Captain America and Bucky were released in Series 40 of Marvel Minimates, as well as the TRU-exclusive The First Avenger tie-in assortment, both of which hit in the early summer of 2011.

FRONTLINE CAPTAIN AMERICA

Frontline Captain America, or Rescue Cap as he’s been dubbed elsewhere, serves as Cap’s Mark I equivalent, a hastily thrown together get-up borne out of necessity.  It’s a call-back not only to the Jack Kirby days when Steve would be seen from time to time in his military fatigues with the Cap costume peaking out, but also to Cap’s WW2 era costume from The Ultimates.  It also brings to mind some memories of the hero of Joe Johnson’s other WW2 era super hero movie, The Rocketeer.  Though short-lived in the movie, its presence during Cap’s first real action scene makes it quite memorable.  The figure is built on the standard ‘mate body, so he’s about 2 1/4 inches tall and he has 14 points of articulation.  Cap uses two add-on pieces: his helmet and his jacket.  The helmet is shared with his assortment-mate Gabe Jones, and works well as a pretty standard helmet.  It sits closer to the head than the previously used Sgt Rock helmet, making it so that hair is not visible, and he doesn’t look bald with it in place.  If you want to get picky, the helmet really should have some goggles on it, but he does lose them in the movie, so it’s not completely inaccurate.  The jacket is  unique to this figure, and features all of the gear Cap was carrying during his raid on the POW camp.  There’s a lot of really great detail work going on there.  I might have preferred the belt to have been a separate piece, but it still works quite well the way it is here.  He also gets a slightly tweaked left hand, designed for attaching his shield.  The paintwork on Frontline Cap is a little bit of a mixed bag.  The linework on his face and torso is really sharp, and the colors are all pretty well chosen.  That said, there’s a fair bit of bleed over on his jacket, and the lines on his legs are somewhat ill-defined.  The closeness of some of the colors on the palette helps to mask it a bit, though.  On the plus side, the face presents a reasonable likeness of Chris Evans as Cap, and I quite like the more intense expression.  Frontline Cap is packed with his original, non-circular shield, which can be placed either on his hand or on his back.  He also includes a handgun (re-used from Blackhawk) and an extra hairpiece for an unhelmeted look.

BUCKY

For the first film, Bucky wasn’t a super soldier like Cap, but he wasn’t quite the comics version of the kid sidekick either.  The movie instead aimed to more foreshadow his eventual return as the Winter Soldier, setting him up as the Howling Commandos’ sharp-shooter.  In terms of design, he actually got a pretty close adaptation of his original comics design, albeit with a more proper military flair to it and some more toned down colors.  Bucky has add-ons for his hair and jacket.  Both of these were new to this particular figure. Interestingly, the hair on the prototype was a different piece, the same one used on Dr. Reed from the Creature From the Black Lagoon boxed set.  No idea why they made the change, and personally I would have preferred the re-used piece.  As it stands, this one’s not terrible, though.  It just sits a little low for my liking.  The jacket piece seems a bit bulky, truth be told, and I think he might have looked better with it just painted on his chest block instead.  Bucky’s paint is reasonable, but not without its flaws.  The slop is a little less of an issue here than it was with Cap, but it’s still somewhat present.  The likeness on the face isn’t a nice as I’d like.  It appears that something happened in-between the control art and the final ‘mate, which has caused his eyes to be sort of oddly placed.  It looks rather strange.  Sgt. Barnes is decently accessorized, including his sniper rifle and the same style of handgun included with Steve.

THE ME HALF OF THE EQUATION

I picked this set up when it was new, courtesy of Cosmic Comix.  Though non-standard, this is really a winning version of Cap.  There are some slight flaws, but he’s an overall very cool figure, and he’s really my favorite design for the character.  I’m glad he was such an early inclusion.  This was only Bucky’s second ‘mate, and after the slightly flawed first one, I’d hoped this one would turn out better.  Though far from terrible, this figure has a lot of smaller issues that add up to a rather forgettable Minimate.

#2819: Brainiac 5

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BRAINIAC 5

LEGION OF SUPER HEROES (DC DIRECT)

The beauty of DC Direct in its early years was a wonderful haven for toys of characters that had literally never had them before.  Without the ability to do Superman or Batman, they had to rely on other characters, allowing for a great focus on fan favorites, such as the Legion of Superheroes, to whom they were able to dedicate an entire line of figures.  They tried to focus on the team’s heavy hitters from the earliest days, and that included the heroic descendent of one of Superman’s greatest foes, Brainiac 5, who I’m taking a look at today.

THE FIGURE ITSELF

Brainiac 5 was one of the two figures in the second series of DCD’s Legion of Superheroes line, with the other one being Mon-El.  After the original three were covered in series 1, Brainy was by far the most natural choice for inclusion.  The figure stands just shy of 6 inches tall and he has 11 points of articulation.  After the weird articulation choices on the first series figures (where someone had the bright idea of “what if we gave them knees but not hips?”), Brainy is a much more straight forward set-up.  Apart from lacking the ball-jointed shoulders that would become more or less standard later, he’s got a decent set-up.  He’s still very stiff, of course, but for DC figures at this time, he was quite good.  Brainy’s sculpt was largely shared with Mon-El, and it was one that would serve as the influence for the rest of the Legion line from DCD.  It’s a pretty nice sculpt, matching up fairly well with the early silver age appearances for the character.  His head and belt were the two pieces that remained unique to him, and they’re both fairly well-rendered.  The head’s maybe not my favorite, but neither is it a bad offering in the slightest.  The slightly looser sleeves are a very cool touch, and one I’m glad they didn’t leave out.  In terms of paint, Brainy is pretty basic, butt gets all of the important things, I suppose.  Like most DCD figures of the era, he’s completely painted, rather than being molded in any of the proper colors.  It means that he does suffer from a slight tendency to scuff in some parts, especially the purple sections, but for the most part it looks alright.  Brainy included no accessories, which was not surprising, I suppose, but was also a shame.  I don’t know what you’d give him, but still.

THE ME HALF OF THE EQUATION

As I’ve brought up previously, a lot of the early DCD stuff fell into sort of “shared” collection of figures between me and my dad.  Initially, all the Legion figures were officially his, but I was allowed to borrow them whenever I wanted to.  I didn’t start collecting them for myself until the line’s final series, thanks to Ferro Lad’s inclusion.  After that, I started going back and filling in the earlier figures for myself.  Brainiac 5 was a little trickier to find by that point, but I wound up getting him from Baltimore Comic Con a few years later.  He’s fairly basic and not much to write home about these days, but he was fantastic for the time, just because we’d never gotten one before.

#2818: Elite Praetorian Guard with Heavy Blade

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ELITE PRAETORIAN GUARD with HEAVY BLADE

STAR WARS: THE BLACK SERIES (HASBRO)

“As the Supreme Leader of the First Order, Snoke was flanked by crimson-clad guardians, loyal protectors encased in ornate armor ready to defend the Supreme Leader from any thread.”

The Last Jedi‘s Praetorian Guards may not be on the screen for long, but they make the most of their time, and participate in the very coolest fight scene in the whole sequel trilogy.  Plus, they’ve just got a very cool look.  Actually, they have three slightly different, but all very cool looks, due to their three differing helmet designs mixed in amongst them.  Hasbro opted for completely separate figures for each of these three helmets, something they delivered through a few different avenues.  For The Black Series, I had two of the three, but was waiting on the last one.  I wait no more.

THE FIGURE ITSELF

The Elite Praetorian Guard with Heavy Blade was an Amazon-exclusive Star Wars: The Black Series offering, which they placed up for order in the fall of 2017, in anticipation of the movie.  It was the third of the three figures to be released.  This one is the “underbite” helmet, which is the only one I haven’t looked at in any style here on the site (largely due to him being an exclusive in every case).  The figure stands 6 1/4 inches tall and he has 29 points of articulation.  From the neck down, this figure is identical to the #50 Guard, which makes sense, since they were all the same.  It’s interesting, of course, because it makes the one from the Guardians of Evil pack the outlier on exactly how he handled the skirt, since this one is sculpted, not cloth.  The posability’s not there as much, but it does look better.  This guy gets a new head sculpt in order to replicate the third helmet design.  It meshes just as well with the body as the other two, and fits the styling of the rest of the armor quite well.  It’s fairly easy to tell it’s a new piece, so that’s good.  The paint work on this figure truly is just identical to the standard release figure, which is to say it’s basic, but it looks good.  Apart from the helmet change-up, the other new piece for this guy was the weapon selection.  He gets the larger Heavy Blade weapon, which is mentioned in his name. It’s a larger, and certainly impressive piece.  He also gets a second weapon, which is more of a sword thing.  Not my preferred of the two, but it’s nice to get the options.

THE ME HALF OF THE EQUATION

The slightly higher base retail on this release was enough for me to hold off on buying him right away.  Unfortunately, he wound up selling out through Amazon, and that meant I missed out on him entirely.  It always bummed me out, because this was my favorite of the three helmets, and I had missed out on both his Hasbro figures.  Fortunately for me, Max had picked one up a while back, and while downsizing his Star Wars collection, he was kind enough to set me up with the one I was missing.  I’ve reviewed the majority of this guy before, so it’s not like he’s doing a whole lot new for me, but it is nice to finish the set, and he really is the best of the three, so I’m glad to have him.