Category Archives: Reviews

#1112: Rey

Posted by Ethan Wilson in Reviews and tagged with , , , ,

REY (JAKKU)

STAR WARS: TITAN HEROES (HASBRO)

reytitan1

Let’s talk disappointment.  No, wait, that’s not quite right, let’s talk misplaced expectations and poor decision making.  Shortly after the release of The Force Awakens last year, social media became aflutter with the hashtag #wheresrey.  After seeing the film, a number of people wanted to rush out and buy figures of Rey, the film’s unquestionable lead.  Unfortunately, as far as conventional figures went, there weren’t really any Reys to be found. No figures of the main character on shelves?  Foul villainy must be afoot!  …maybe not quite.  See, it’s important to note that #wheresrey started cropping up about a week after the film’s release.  Now, right after a film’s release, it’s not uncommon for figures from that movie to become a little scarce (for instance, a week after Pacific Rim came out, the figures were gone from shelves and commanding as much as three times their retail value on the aftermarket).  On top of that, the week after the movie came out, we also had this little event called Christmas, which has a tendency to leave toy aisles rather barren.  So, maybe expecting to find a ready supply of figures of the main character of one of the biggest movies of the decade the week of Christmas wasn’t the most realistic expectation.  That’s not to say Hasbro did everything spot-on, mind you.  While they did put out a number of Rey figures, she (and all the main characters barring Kylo in the 3 3/4-inch line and Finn in the 6-inch line) was only available in the initial assortments of figures, released three months prior to the movie.  What really kicked off the whole hashtag, though, was Rey’s absence from the Target-exclusive Titan Heroes 6-pack (and really, Titan Heroes as a whole).  Now, there are a number of credible reasons she was left out of this set, but ultimately, it’s the sort of thing that Hasbro should have avoided (and is looking to avoid in the future, if Rogue One has been any indication).  To their credit, one of the earliest items Hasbro released following the film’s release was a Titan Heroes version of Rey, who I’ll be looking at today!

THE FIGURE ITSELF

reytitan2Rey was released in the second round of Force Awakens-based Star Wars: Titan Heroes, alongside a Stormtrooper Finn and the Fifth Brother from Rebels.  She’s wearing her Jakku gear that she spends the vast majority of the film wearing.  The figure stands just under 12 inches tall and she has 7 points of articulation.  Structurally, Rey is rather similar to her first 3 3/4 inch figure.  The only real difference is the size and the actual materials being used.  She’s made of a much harder plastic than the smaller figures, and her torso and legs are hollow, which makes her slightly weird feeling (and also a bit creaky when you move her).  Aside from being rather stiff, the sculpt on this figure is actually pretty strong.  The head is definitely the best part, and it gives us Hasbro’s best Ridley likeness so far.  It’s really spot on, in part, I think, because the strands of hair in front of her ears didn’t have to be sized up quite as much and thus don’t look like dreads or curls or something.  The rest of the body is all pretty solid work; not Hot Toys level or detail or anything, but still solid.  The paintwork on this figure is actually pretty impressive.  The base color work is all strong, but I think the best part is the subtle accent work on the skin-toned areas.  There’s just the slightest bit of a red hue there, and it makes her look incredibly lifelike.  There are still a few spots of bleed over here and there, and it’s worth noting that the harder plastic makes this figure more susceptible to paint scuffs, but for a $10 figure, this is pretty great work.  Rey included her staff, which, thanks to the wrist swivels, she can actually hold with two hands, albeit rather awkwardly.

THE ME HALF OF THE EQUATION

I have to admit, because of the whole #wheresrey thing, I ended up buying just about every Rey I could get my hands on just to prove a point, and this figure was included.  I don’t actually have any of the other figures in this style, but beyond the novelty of it being another Rey figure, this figure really surpassed my expectations, and, from what I’ve seen looking at the other figures in stores, the quality of the rest of the line as a whole.

#1111: Punch It

Posted by Ethan Wilson in Reviews and tagged with , , , ,

PUNCH IT

SMALL SOLDIERS (HASBRO)

punchit1

I feel it would be unfair tor review a member of the Commando Elite without also giving the Gorgonites their proper due, so today I’ll be looking at yet another Small Soldiers figure.  Fun Fact: the supporting Gorgonites in the movie are all voiced by the members of Spinal Tap (likewise, the Commando Elite are voiced by the cast of The Dirty Dozen).  Harry Shearer, also known for his work on The Simpsons, voiced Gorgonite Punch It, whose figure I’m taking a look at today.

THE FIGURE ITSELF

punchit2Punch It was part of Hasbro’s Small Soldiers line from 1998, but he wasn’t a standard release.  Due to his size, Punch It was his own, special deluxe release.  It’s actually a bit surprising that he was just a solo release, and not packed with Scratch It, his perpetual companion from the movie (who you had to buy a large vehicle to acquire).  Anyway, the figure stands a little under 8 inches tall and he has 6 points of articulation.  The articulation issue is still present here, but amusingly enough, Punch It has more articulation than a lot of the figures in the line, despite his on-screen figure actually having less movement than the other figures.  The only real frustrating part for me is that the hands and legs, which are separate pieces, are glued in place, rather than being articulated.  Punch It’s sculpt is actually one of the better sculpts to come out of this line.  It captures the movie design pretty solidly, and there’s a lot of really tight small detail and texture work.  He’s appropriately chunky and solid, and all of the extra details make him one of the most visually interesting figures Hasbro put out.  Possibly the only downside to the sculpt is the fact that if you remove his big missile launcher on his back, there’s a big obvious post sticking out.  Of course, it’s not like it’s anywhere near as obvious as the huge freaking gun thing on Brick Bazooka’s back, so that’s a plus.  Punch It also gets one of the cooler paint jobs from the line.  The basic work is all pretty solid and clean, and the colors match up nicely with his design, but I think the coolest part is the marbleized plastic for his skin, which plays up the texturing very nicely.  Punch It included a back-mounted missile launcher and a clip-on claw for his right arm.  My figure doesn’t have those pieces, sadly, so I can’t expose you guys to the awesomeness therein.

THE ME HALF OF THE EQUATION

I’m always on the prowl for Small Soldiers figures, so when I found Punch It at Yesterday’s Fun over the summer, I was pretty psyched.  Sure, he was loose and missing the accessories, but there’s no denying the sheer coolness of this design.  If I’m totally honest, I think that Punch It’s design was the one that best translated to the actual toyline.  This guy is just really, really cool, and I’m very happy that I got one.

#1110: Sgt. Brick Bazooka

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SGT BRICK BAZOOKA

SMALL SOLDIERS (HASBRO)

bazooka1

Back in April, I looked at a pair of figures from Small Soldiers, which is probably one of my favorite movies (I know, Ethan likes the movie about the action figures.  What a shock).  The figures in the movie, built by the legendary Stan Winston Studios, are really, really cool.  There was a tie-in toyline from Hasbro (who also helped design the on-screen figures), which don’t quite capture the awesomeness of their onscreen counterparts, and was sadly short-lived.  That being said, something is better than nothing, right.  Today, I’m taking a look at one of the villainous Commando Elite, Sgt. Brick Bazooka!

THE FIGURE ITSELF

bazooka2Brick Bazooka was released in the first series of Small Soldiers figures from Hasbro.  Unlike Archer and Chip Hazard, this was Brick’s only figure in the line.  This figure is more or less captures his basic look from the film.  He’s about 6 1/2 inches tall and he has 5 points of articulation (well, technically he’s got 6, but one of those is tied directly into his action feature).  As I noted in the last two Small Soldiers reviews, the articulation on these guys is by far the most disappointing aspect. That we couldn’t even get elbows and knees is the worst part.  But, three figures in, I can kind of move on from it.  There’s two aspects of the sculpt: one good, and one sort of weird.  One the good side, from the front, the figure’s a pretty good representation of the “sculpt” from the movie.  He’s got the buzzcut and the super creepy grin down pat, and while he’s not a pitch-perfect recreation of the film design, he fits in well with the other figures in the line, which is really the most important thing.  So, about the weird.  You know how his name has Bazooka in it?  Well, apparently, that means he needs to actually turn into a really big gun.  Because toys or something.  Anyway, the gun swings forward from his back, with his head flipping through the torso, and…stuff.  It’s kinda weird.  I can’t say it adds much to the figure, and it means that he’s got this huge gun sticking off of his back even in normal mode.  It looks rather strange.  The paint work is pretty much on par with the other figures I’ve looked at.  It’s clean, it matches pretty well with the colors on the screen, and all-around looks like what you see in the movie.  There are a few missing details here and there (which was true with the others as well), and mine sort of beat up, but that’s understandable.  Brick was packed with two large guns and a missile for his chest-gun-thingy.

THE ME HALF OF THE EQUATION

When I was growing up, I didn’t have a Brick Bazooka figure, but my cousin Rusty did, and I was always a bit envious of that, because I thought he was a really cool figure.  For whatever reason, Bazooka’s one of the rarer Small Soldiers on the after market, so I didn’t see one for a good long while.  Brick ended up being a birthday gift from my parents, who picked him up for me from 2nd Chance Toyz.  This guy’s really goofy, and totally a product of the ‘90s, but that’s kind of what I’m about.

#1109: Daredevil

Posted by Ethan Wilson in Reviews and tagged with , , ,

DAREDEVIL

MARVEL LEGENDS (3.75)

ddyellow375a

Given how long he wore it, Daredevil’s yellow costume is rather disproportionally popular.  I guess it’s just different enough that it stands out.  It’s also a pretty easy variant for toy companies to release, what with using the same selection of parts as the normal Daredevil costume and all, so there’s lots of incentive to make figures of the design.  So far, its shown up in just about every major scale of Marvel figure, including 3 3/4-inch, which I’ll be looking at today.

THE FIGURE ITSELF

ddyellow375bDaredevil was released in the second series of the smaller-scale Marvel Legends line.  He’s the second smaller-scale Yellow Daredevil figure we’ve gotten, but the last one was built on one the less than stellar bodies that Hasbro used to kick off Marvel Universe, so an update was much needed.  The figure stands about 4 inches tall and he has 28 points of articulation.  Structurally, he’s the same as the Daredevil vs Bullseye two-pack version of Daredevil from the  Marvel Universe line.  Since that figure’s tooling was already paid for, it means this guy gets to keep all of the articulation, giving him about 10 points more than his compatriots from this same series.  Like with the Marvel Legends Daredevil I looked at a few months back, the sculpt here seems a little too well-built for an early in his career Matt Murdock, but it’s not like it’s a bad sculpt or anything.  In fact, he was probably one of the better sculpted Marvel Universe figures.  Paint is the key part here, and it works alright.  The color scheme is pretty much the same as we saw on the larger figure this year.  The brown isn’t my favorite thing ever (I prefer black with red highlights), but it looks decent enough, and everything looks pretty sharp.  The logo on the chest is still a little on the large side, but it’s not quite as bad as on the larger figure.  Daredevil is packed with his billy clubs, which are the same as those included with all the prior small-scale Daredevils.  They work pretty well, and seem a bit less rubbery this time.

THE ME HALF OF THE EQUATION

Daredevil was picked up for me at the same time as Rage, mostly to keep my Yellow Daredevil collection going.  There’s not really much new here, but I liked the basic version of this figure, and by extension I like this one.  There’s certainly nothing wrong with a simple repaint when it’s appropriate, especially when it means I get another Yellow Daredevil!

#1108: Rage

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MARVEL’S RAGE

MARVEL LEGENDS SERIES (3.75)

rage1

There are a lot of rather obscure characters in comics.  It sort of comes with the territory, since you can’t expect every single character who appears in a monthly installment of serialized fiction to be beloved by the masses.  What’s interesting with some of these characters is how close to high profile they get.  Take today’s entry, Rage, for instance.  Rage was a member of the Avengers, for over a year no-less, but most people would be completely unable to ID the guy if they saw him.  He did get something of a cult following from his stint with the New Warriors, and now he’s even got an action figure, so maybe things are looking up for him!

THE FIGURE ITSELF

rage2Rage is from the second series of the 3 3/4 inch scale Marvel Legends line by Hasbro.  Thanks to Living Laser’s presence in the set, he may not even be the most obscure character from the series, which is kinda saying something.  The figure stands a little over 4 inches tall and he has 19 points of articulation.  The reduced articulation of this line is something I’ve addressed a few times, and mostly I don’t find it ruins or holds back the figures too badly.  However, Rage seems far stiffer in terms of range than prior figures, and on top of that, his head can’t actually turn more than a few degrees before popping off, which is really annoying.  Rage is seen here in his original costume.  It’s not a particularly attractive design, but let me tell you, he’s had far, far worse during his career.  Rage is built on one of the larger male bodies, with character specific pieces for the head, lower arms, and lower legs, and add-ons for his jacket and belt.  The jacket and belt are definitely very strong pieces, and the hands and feet are pretty good too.  Something about the body and the head seems a little too smooth for me.  Like he’s unfinished or something.  It’s hard to say, but it really feels evident on the torso.  It’s on par with a lot of the other stuff from this particular line, so I can’t really say he’s an outlier in that regard, but I also can’t say that’s much of a point in his favor.  I just sort of wish the whole sculpt matched the quality on the vest.  Rage’s paintwork is generally pretty straight forward.  It’s mostly just solid color work, which works fine for the character.  There’s a little bit of accenting on the vest and pants, which goes a long way, and gives him some much needed pop.  Rage has no accessories, but I can’t really think of what you’d give him anyway.

THE ME HALF OF THE EQUATION

Rage here was picked up for me by totally rad brother, who got him for me while I was away with Super Awesome Girlfriend and her family.  Back when the Marvel Universe line was in full-swing, I put a lot of effort into tracking down as many Avengers in that scale as I could get ahold of, so from that perspective, Rage is pretty cool to finally have.  Could he be better? Probably, but this is quite possibly the only Rage we’re ever going to see, and he’s far from the worst thing ever.

#1107: Captain Rex

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN REX

STAR WARS: THE FORCE AWAKENS

rexrebels1

Ever since The Force Awakens re-launched everything, I’ve been on a pretty serious Star Wars kick, and it’s only gotten worse with all the Rogue One stuff.  One of the things I’m finally getting around to as part of said kick is watching Star Wars: Rebels.  I gotta say, I don’t know why I put it off for so long, it’s definitely a fun show.  One of the cool things about the show is how it’s connecting its predecessor Clone Wars with the Original Trilogy, by bringing in a few of Clone Wars’ original characters.  One of my personal favorites from Clone Wars was clone Captain Rex, who appears in Rebels during the second season.  I haven’t gotten to him on the show just yet, but that didn’t stop me from picking up his action figure!

THE FIGURE ITSELF

rexrebels2Captain Rex is from the towards the tail-end of the Star Wars: The Force Awakens line.  He was part of the third Desert Gear assortment, alongside Unkar Plutt and FN-2187.  This assortment technically hit back in February, but most places didn’t see it until early summer.  Rex is based on his Rebels appearance, which is a fair bit removed from his Clone Wars look, what with it being 15 years later and all.  The figure stands about 3 3/4 inches tall and has the basic 5 points of articulation we’ve come to expect from the standard 3 3/4-inch stuff.  Rex’s sculpt is unique to him, and it does an alright job translating his show design into plastic form.  I wouldn’t mind a bit more fine detailing here and there, but the overall appearance matches up pretty well.  For some reason, Rex has been sculpted with his chest puffed out bit and his neck set back.  The only way to get him to look forward is to tilt the head down as far as it will go on the ball joint, and even then he’s still sort of looking upward.  I’m not sure why they handled him that way, and it makes posing him rather difficult.  In terms of paint, Rex is certainly well executed from at technical standpoint, with most of the paintwork being rather clean.  The real issue is that he’s actually too clean.  His show design has the armor looking rather disheveled, but on the figure that’s really limited to just the bottom of his boots.  He doesn’t look terrible by any means, but he isn’t quite as cool as he could be either.  Rex includes a pair of small blaster pistols, just like the ones he carried during Clone Wars, which can be stored in the holsters on his legs.  He also has his helmet, which seems slightly oversized, but is still pretty cool.  I especially like that he still has the tally marks that he was sporting towards the end of TCW.  Lastly, Rex has a piece of the build-a-whatsit thing.  It’s a staff that fires a missile.  It’s actually not as lame as prior pieces, but still not adding much value to the figure.

THE ME HALF OF THE EQUATION

I actually picked up Rex before starting Rebels, back during the summer.  I was in upstate New York with Super Awesome Girlfriend and her aunt and uncle on an RV trip, and I found this guy at the local Walmart.  Not gonna lie, I partly bought him because he was one of the few figures there I didn’t have, and I was sort of going into withdrawal due to not having ready access to internet and being in a town with literally nowhere to buy action figures (apart from said Walmart).  That being said, I’d been intrigued by this figure since seeing his prototype at SDCC.  I’ve always had a soft spot for Rex, and I look forward to seeing him on the show. 

#1106: Princess Anck-es-en-Amon & Frank Whemple

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

PRINCESS ANCK-ES-EN-AMON & FRANK WHEMPLE

UNIVERSAL MONSTERS MINIMATES

princessfrank1

Okay, so Halloween’s passed now, but I didn’t want to review just half of the Minimates based on The Mummy (since all the other Universal Monsters Minimates reviews cover four ‘mates at a time, anyway).  With that in mind, today’s review is the second half of what I looked at yesterday.  With the “creature” covered, today I’ll be looking at the Mummy’s object of affection Princess Anck-es-en-Amon and heroic archeologist adventurer Frank Whemple!

THE FIGURES THEMSELVES

princessfrank2Like yesterday’s set, Princess Anck-es-en-Amon and Frank Whemple were released in the third series of Universal Monsters Minimates. The pair was exclusive to Toys R Us, but that wasn’t the initial plan.  The original intent was for Imhotep, the Sarcophagus, and Princess Anck-es-en-Amon to be released via specialty channels in a four pack that would also include an exclusive Helen Grosvenor ‘mate.  That would have left Frank as the lone TRU-exclusive ‘mate.  Of course, the end result would mean that to get a full set you’d need to buy an extra Anck-es-en-Amon, but that was something of a recurring issue with this particular line.  For reasons DST never specified, a production problem caused the specialty Mummy set to be cancelled, leaving the entire Mummy line-up exclusive to TRU, with Helen going un-released. 

PRINCESS ANCK-ES-EN-AMON

princessfrank3Here’s an interesting thing about this figure: it actually pulls double duty (which is fitting, since, had the boxed set been released, you would have needed to Anck-es-en-Amons to get a full set).  One of the cruxes of the film’s story is how closely our hero Helen Grosvenor resembles Imhotep’s long-dead love Princess Anck-es-en-Amon.  During the film’s climax, he goes so far as to dress the kidnapped Helen as the Princess.  Since the two were both played by Zita Johan, this figure effectively can be both of them.  That’s actually pretty cool, and means that even with the proper Helen ‘mate unreleased, the collection isn’t missing an important character.  Anck-es-en-Amon is built on the standard ‘mate body, so she’s just shy of 2 1/2 inches tall and has 14 points of articulation (though the hair and skirt restrict her movement a fair bit).  The figure has two add-on pieces for her hair/headdress and her skirt.  Both pieces are unique to this figure, and they do a pretty nice job of capturing the costume pieces from the movie.  The paintwork on the Princess is pretty solid.  While it’s not quite as astounding as what we saw on Imhotep, it’s still quite nice.  The face has a pretty good likeness of Johan in the part, and her top has a nice bit of detail and texture work.  Perhaps the coolest thing about this figure is the skirt, which has actually been molded in slightly transparent plastic, so as to make it appear shear, as her skirt in the film was.  It the sort of detail that could have easily been overlooked, but really takes the figure from decent to pretty darn cool.

FRANK WHEMPLE

Frank is really meant to be the lead hero in The Mummy, but for reasons beyond his control, he tends to be largely forgotten, since there’s not really much that’s unique about the guy.  It can’t be at all a coincidence that he got packed with the most visually interesting ‘mate in all of Series 3, since he certainly wasn’t going to move this set by himself.  Frank was built from the same standard parts as the Princess.  He too gets two add-on parts, for his hair and his jacket/tie.  The hair first appeared on the Captain America Through the Ages Armored Cap, but Frank’s prototype actually sported it a few years prior (all of the Universal Monsters Minimates were shown at once and then released two movies at a time each October for three years).  The hair looks somewhat like Frank’s from the movie, but it’s not quite spot-on.  The tux piece is a pretty cool one, and it does’t bulk him up too much like some jackets do on ‘mates.  The paint on Frank is iffy at best.  There’s a lot of slop on the edge of his shirt, which is quite annoying, and the detail lines on his face seem kind of dull.  The face also doesn’t look much like actor David Manners, but that’s probably due to his face not being a shape that easily translates to a simple cylinder.  This figure may not be the most exciting but, on the plus side, since David Manners was also John Harker in Dracula, and wore an outfit very similar to this, he can easily fit in with the Dracula set DST put out as well.  Bonus feature!

THE ME HALF OF THE EQUATION

Like yesterday’s set, I picked these guys up new from TRU, before having seen The Mummy.  While the Imhotep set is cool regardless of the movie, I think an appreciation of the movie is key to really enjoying Frank.  That being said Anck-es-en-Amon is a very, very well done ‘mate, and perhaps one of DST’s most attractive female Minimates.  Had the boxed set materialized, I think this two pack might have been an easy skip, but without that extra way to get the princess, this is kind of a must have set, if just to go with Imhotep.

#1105: Imhotep & Sarcophagus

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

IMHOTEP & SARCOPHAGUS

UNIVERSAL MONSTERS MINIMATES

mummy1

It’s Halloween!  Oooh, aaah, scary and what-not.  To keep with the spirit of things (funny, riiiight?  I’ll show myself out…), I figured I’d take a look at something of the horror variety.  The last three Halloweens, I’ve looked at Minimates, and I’ll be darned if I’m gonna break the tradition now.  Today’s entry, like my first two Halloween reviews, comes from DST’s Universal Monsters Minimates line.  While years 1 and 2 covered some big guns with Frankenstein and Dracula, this one goes slightly more minor, being based on 1932’s The Mummy (which is one of my personal favorites of the Universal Monsters films).  Let’s look at the film’s titular creature, Imhotep, and the thing he comes sealed in!

THE FIGURE ITSELF

mummy2So, right off the bat, let’s address something: this was technically sold as a two pack, but there’s really only one figure included.  He just gets an extra large accessory, which takes the place of the second figure.  Imhotep was released in the third (and sadly final) series of Universal Monsters Minimates.  He and the Sarcophagus were exclusive to Toys R Us (though they weren’t initially meant to be.  I’ll touch on that tomorrow).  Imhotep is seen here in the wrappings he was buried in.  He only spends about five minutes of the film’s run-time this way, but it’s what’s on the poster and just about all of the merchandise, and it’s hands down the more memorable look for the character, so DST’s choice of garb is hardly in question.  The figure is about 2 1/4 inches tall and he has the standard 14 points of articulation for a Minimate.  Apart from a slightly unique right hand featuring a ring, Imhotep is a vanilla ‘mate.  No sculpted add-ons here.  This means there’s extra pressure on the paint to deliver, but fortunately this figure passes with flying colors.  The level pf painted detail on this figure is nothing short of amazing, and he’s easily got the best paint work I’ve ever seen on a Minimate (and I’ve seen a lot of Minimates).  Application-wise, the sheen is surprisingly flat for a mass market item, which does a lot to bring out the painted details.  The bandages on the body are very well crafted, match up with the wrapping seen on screen, and even sport some awesome texture to boot.  The head takes the cake, though, rendering not only Imhotep’s decaying visage perfectly, but really nailing the Boris Karloff likeness as well.  The Sarcophagus is the only extra here (and even then, it replaces a figure), but was an all-new piece.  It’s done in two parts, so that you can remove the lid and place Imhotep inside.  The lid gets the bulk of the sculpted and painted work, and it does an admirable job of translating what we see on the screen into Minimate form.  Perhaps the only downside to this extra is that Imhotep can’t properly cross his arms to mimic the pose on the lid.

THE ME HALF OF THE EQUATION

At the time that this set of ‘mates came out, I actually hadn’t seen The Mummy, but being a good Minimate fan, I picked this pack up first, and was then driven to see the movie, at which point I realized that both the movie and this set were actually pretty awesome.  This ‘mate remains to this day one of my very favorite Minimates, and he’s the definite standout of the Universal Monsters line.

mummy3

#1104: Cyclops

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CYCLOPS

X-MEN: METALLIC MUTANTS (TOY BIZ)

cyclopsmetallic1

I’ve discussed Toy Biz’s larger 10-inch-scaled Marvel figures in the past.  Essentially, since Toy Biz did the prototypes for their successful 5-inch line as two-ups, they had an easy time re-using those sculpts for a line of slightly cheaper 10-inch figures (though, interestingly, the line was originally billed as a deluxe line of figures.  It was only later, when they decided to focus more on building as many figures as they could out of a limited pool of parts that it became “cheap”).  Toy Biz’s 10-inch X-Men line, like it’s smaller scale counterpart, was the most successful of the initial lines, even managing to get its own spin-off line, Metallic Mutants, where certain figures were re-released with metallic color schemes.  Today, I’ll be looking at the Cyclops figure from that line.

THE FIGURE ITSELF

cyclopsmetallic2Cyclops was from the first series of X-Men: Metallic Mutants. The whole Metallic Mutants line was available exclusively at KB Toys (who would also become the exclusive retailers of the entire 10-inch line a few years later).  The figure is about 10 inches tall and he has 9 points of articulation, which was a whole extra point more than his 5-inch equivalent had.  The figure is a straight repaint of the basic 10-inch Cyclops, who was himself patterned on the sculpt of Cyclops II from Toy Biz’s main X-Men line.  The sculpt is a little bit different.  He lacks the light-up feature of the smaller figure, which results in him getting the neck articulation the smaller figure lacked.  Aside from that, the sculpt is pretty much the same.  It’s okay for the time, but certainly isn’t one of Toy Biz’s stronger sculpts.  Due to the light-up nature of the smaller figure, the torso was made a bit larger to house the battery compartment, and that’s still seen here.  While the legs seem to match up okay with the larger torso, the arms and head feel rather under-sized by comparison, which makes him look rather odd overall.  Each piece of him seems fine on its own, but as a whole he looks a bit patchwork.  I will admit, there’s a certain quaintness to the sculpt that I appreciate, though.  The big deal on the figure, of course was the paint.  It’s certainly metallic, there’s no denying that.  The costume looks cool in the metallic shades, but what sort of throws him off is the decision to do his skin and hair in the same gold as the “yellow” bits of the costume.  Clearly, Toy Biz caught on to this being weird, since the second set of Metallic Mutants just had the metallic colors on the costumes, not the actual faces.  Cyclops included a blaster thing, in the same gold as used on the body, which is cool I guess.

THE ME HALF OF THE EQUATION

As hokey as this guy is, I’ve actually always wanted one.  Growing up, I had the little product booklet that came with the TB Galactus, which had these guys all pictured in it, and I always wanted Cyclops in particular.  I ended up finally getting this guy for my birthday this summer from my parents, who bought him from 2nd Chance Toyz.  Is he weird and goofy and strange?  Yes.  Do I love him? Emphatically yes.

#1103: Ant-Man & Falcon

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

ANT-MAN & FALCON

MARVEL MINIMATES

antmanfalconmm1

There are a lot of different standout characters in Civil War.  For a great number of people, it was Spider-Man, and for an almost equal number it was Black Panther.  Me personally?  Vision and Scarlet Witch all the way.  There was also a pretty sizable contingent of people whose favorite bits centered around Paul Rudd’s (Gi)Ant-Man, who made the most of his screen-time.  As such, it’s not a huge surprise to see the character turn up amongst DST’s offerings for the film.  Alongside him, my favorite character from the last Captain America film (as well as one of my favorite parts of the Ant-Man film), Sam Wilson, aka the Falcon.

THE FIGURES THEMSELVES

Ant-Man and Falcon are the second TRU-exclusive set for Civil War, and were released alongside Series 67 of the main line (meaning the hit in late July/early August).  It’s easily one of the better pairings we’ve gotten so far.

ANT-MAN

antmanfalconmm11Like so many characters before him, Ant-Man was one of those MCU characters who’s costume changed just enough from one movie to the next to warrant a new figure (hey, at least he’s more different than Vision).  I myself never got the basic Ant-Man from his solo movie (bad me), so this guy was actually pretty cool to get, and I can’t deny that the new design is pretty sharp.  The figure is built on the basic ‘mate body, and as such stands a little under 2 1/2 inches tall and has 14 points of articulation.  He has one add-on piece for his helmet.  It’s new to this particular figure and is a pretty faithful recreation of the helmet he was sporting in the movie.  The paintwork on Ant-Man is nice and sharp, detailing all of the various bits of his costume, and overall looking pretty accurate to the source material.  That’s especially refreshing with regards to the helmet, since none of the Ant-Man movie merch got his helmet down right.  Ant-Man includes a spare hairpiece for displaying Scott sans helmet, as well as a clear display stand.

FALCON

antmanfalconmm10As cool as I think Falcon’s comic book costume is, it’s understandably a little hard to adapt to real life.  So, it wasn’t much of a surprise that he was sporting more or less real-world fatigues in The Winter Soldier.  That being said, it wasn’t the most exciting design.  Over the course of his cinematic appearances, his uniform has slowly evolved into something a bit more akin to his comics appearance.  His Civil War design is his most exciting yet, keeping the real world nature of the Winter Soldier design, but also adding the the color scheme from his comics incarnation.  Structurally, Falcon uses add-ons for his goggles and backpack, as well as a unique set of upper arms (with removable posable wings), and two different gloved hands.  The end result does a very nice job of converting his onscreen appearance, and improves in a number of ways on the last MCU Falcon (which was already a pretty awesome figure).  The paintwork on Falcon is decent, though not quite as clean as the work on Ant-Man.  The detail lines are all pretty sharp, and the colors are nice and bright.  The only real downside is the sloppiness on some of the basic color work, mostly on the shoulders.  The overall look is pretty cool, though.  Falcon includes a handgun (why just the one is a little baffling, since he always has two in the film), Redwing, two different styles of flight stands (one for him, one for Redwing), and a clear display stand.

THE ME HALF OF THE EQUATION

I grabbed this set while out and about looking for those pesky X-Men Legends at various TRU’s.  I was actually quite happy to find it, since these are two of my favorite characters from the movies (and the comics, truth be told).  Ant-Man is a pretty solid addition to the roster of Ant-Men, though he may not be the most exciting ‘mate to people who have the last two ‘mates.  Falcon is a really nice improvement over the last MCU Falcon, and even more welcome since that one’s a bit hard to find now.   Probably one of best sets to come out of the Civil War Minimates.