Category Archives: Reviews

#0665: Casey Jones

Posted by Ethan Wilson in Reviews and tagged with , , ,

CASEY JONES

TEENAGE MUTANT NINJA TURTLES MINMATES

CaseyJ1

So, my love of almost all things Minimates and my moderate interest in Teenage Mutant Ninja Turtles insured that I found myself a full set of the line’s first series. After the first series, my interest kind of waned a bit. Not the fault of the line or anything, I just got distracted by other stuff. I did manage to track down one of the Series 2’s figures, Karai, which I liked well enough. One of the more glaring omissions from Series 1 was long-time Turtle ally Casey Jones, who found his way into the second set.

THE FIGURE ITSELF

CaseyJ2Casey Jones was released blind-bagged, as a part of the specialty assortment of Teenage Mutant Ninja Turtles Series 2. He’s also available packed with Michelangelo in the Toys R Us assortment, for those wanting to go the non-blind-bagged option. The figure stands about 2 ½ inches in height and has the usual 14 points of articulation. Like all the others in this line, he’s based on Casey’s appearance in the current cartoon. Casey features a fair number of sculpted add-ons for his mask/hood, straps/shoulder pad, elbow pads, belt, and his padded gloves. The elbow pads are re-used from the Ghostbusters Minimates line, but aside from that everything’s all-new to Casey. Everything is exquisitely sculpted, with tons of detail work, but not so much as to make him look out of place amongst the other Turtles Minimates. The padded gloves in particular look pretty amazing, with some great texture work on the stitching and padding. Paintwork is the downfall of most of the Turtles Minimates, but it seems to have turned out a fair bit better for good ol’ Casey here. For the most part, the base color work is pretty cleanly handled. There’s a little bit of bleed over here and there, but nothing too bad. There CaseyJ7are even a few areas with purposeful slop, which are very nicely handled and add a nice extra bit of character to the figure. The detail lines are all carefully placed, so as to capture the animated style in as few lines as possible. Under the mask, there’s a full Casey face, which is a little bit goofy looking for my taste, but captures the show look pretty well. Casey, like a lot of the Turtles Minimates, is no slouch in the accessories department, featuring an extra head, hairpiece, hands, a pulled down hood, two different hockey sticks, a baseball bat, and a clear display stand. The hair and hood allow for unmasked displays of the character, and the extra head gives us the skull-ish face paint he’s sported on the show. The various sports equipment is kinda key to the character, so it’s cool to see here, and well-sculpted to boot.

THE ME HALF OF THE EQUATION

After playing the blind-bag game with Series 1 and then trying again with Series 2 and getting Karai, I decided to give up and just get an opened Casey from my favorite Minimates retailer, Luke’s Toy Store. Casey’s long been one of my favorite parts of the Turtles mythos, so I was happy to see him turn up in the Minimates line. The final figure is a little different from my preferred interpretation of the character, but he’s one of the better figures this line’s had to offer.

CaseyJ3

#0664: Silver Ranger

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SILVER RANGER

POWER RANGERS IN SPACE

SilverRanger1

When I was a fair bit younger, I was pretty into Power Rangers. That shouldn’t be a shock, seeing as I was a boy under 10 in the 90s. It was sort of a rite of passage. Once I hit 10 or so, I moved away from the series, though, unlike a lot of other people, it wasn’t because I suddenly found the series lame, but rather because none of the new seasons could live up to Power Rangers In Space, which had been by far my favorite iteration of the series. I recently sat down and watched a few episodes from the show and I was actually pleasantly surprised to find out that the show was actually as good as I remembered it to be. Like just about every Power Rangers incarnation, In Space had a “Sixth Ranger” added to the team as the show progressed, called the Silver Ranger because he was…well, silver. He was super cool. Let’s look at a toy of him!

THE FIGURE ITSELF

SilverRanger2The Silver Ranger was an interesting case as far as figures go. None of his figures were in the initial offerings of toys, as his character had not yet appeared. When he did finally appear, Bandai had to do a handful of special offerings to ensure that he got a few figures that would fit with the other Rangers. This particular version was released in a set with a Galaxy Cycle in silver. The figure stands roughly 4 ½ inches tall and has 13 points of articulation. Silver is built on the exact same body used for all of the Galaxy Cycle Pack-in cycles (yes, even the girls). It’s an interesting body because, unlike all of the other Power Rangers In Space figures released in the US, the figures on this body aren’t overly musclebound. That’s actually kind of nice to see. That said, the body ends up being exceptionally simplistic in general, which doesn’t win it a lot of points. Aside from the slight detailing on the mouth of the helmet, and some decent work on the belt buckle, the figure is more or less devoid of any real detail. It looks somewhat like a crash test dummy. Also, the hands are ginormous, to almost insane levels, which looks rather silly on an otherwise skinny figure. It’s not a bad sculpt overall, but it was out of date even when it was brand new. The paintwork on the figure is just about as simple as the sculpt. He’s mostly just molded in the appropriate colors, which leads to some oddness, especially where the gloves go up past the elbows. The head gets the best detailing, with several different colors and no real issues with bleed over and slop. The details on the torso aren’t actually painted. Instead, they’re just decals, which definitely didn’t hold up in the long term. The Silver Ranger originally included a blaster, as well as the previously mentioned Galaxy Cycle. However, my figure has neither of these, so no review for them. Sorry guys!

THE ME HALF OF THE EQUATION

Silver Ranger was purchased at Yesterday’s Fun while I was on vacation this year. I never managed to find any of the basic Silver Ranger figures growing up, and they’ve since shot up in price, so I was actually pretty excited to find him. Yeah, the figure is definitely dated, and not in the greatest condition, but it’s the Silver Ranger. He’s just cool! And that kind of outweighs the negatives.

#0663: Power Swing Superman

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

POWER SWING SUPERMAN

SUPERMAN: THE ANIMATED SERIES

PowerSwingSM1

When you are creating an entire line of action figures based on a property with one defined look for your main character, the only way to keep the main character at the forefront, logically, is to release a bunch of variants of that character. Sometimes, they’ll be authentic designs from the source material (such as many of Hasbro’s recent ML Spider-Men) or a practical extension of their basic look (like Iron Man). Other times, they’ll just be completely made up. Enter Power Swing Superman.

THE FIGURE ITSELF

PowerSwingSM2Power Swing Superman was part of the fourth series of Kenner’s Superman: The Animated Series line. This series is significant because it wasn’t carried by conventional US retailers. Instead, it hit in Europe first. The series didn’t make it to the States until it was offered by Diamond Distributers a few months later. So, there’s that story. The figure stands 5 inches in height and has 6 points of articulation (though his waist swivel is limited by the action feature). Now, where, you might ask, did this figure’s costume originate? Some one episode look, or perhaps an obscure Elseworlds story? Nope, it came straight from the minds of the toy designers. Yes, this costume is totally made up for the figure, though it is notable that this figure removed the signature red shorts over a decade before the New 52 redesign made it canon. The line never really stuck to the show’s style when it came to sculpts, but this figure actually takes it even further, with more defined musculature and an exaggerated pose that wouldn’t look out of place on the dance floor of a disco. While many of the wacky Supermen were sculpted in his traditional garb and painted funky after the fact, this figure’s sculpt actually has details that correspond specifically to this design, which is kinda neat. The best part of the figure is easily the head sculpt, which actually manages to be the most show-accurate sculpt the line ever produced. It’s spot on! The paintwork on the figure is alright, but not great. It sticks to his traditional colors, though placed a bit differently. The colors are nice and vibrant, but the application is spotty. The costume has a lot of bleed over, and the red areas in particular feel like they could use another coat of paint. The head manages to be the best piece once again, avoiding the bleed over and actually doing a very nice job on the eyes. The figure included a large piece of pipe for him to hold, as well as a miniaturized version of Luthor’s exo-suit from the pilot episode. Also, his waist is spring-loaded, allowing him to “swing” the pipe at the exo-suit and “demolish” it. It’s not high-end or anything, but it’s amusing.

THE ME HALF OF THE EQUATION

Power Swing Superman was one of my many purchases from Yesterday’s Fun whilst on vacation this year. I had actually always been intrigued by this guy, but I’d never seen him in person. So, when I came across him, I snatched him up quickly. He’s definitely goofy, but I really enjoy him.

PowerSwingSM3

#0662: Jubilee & Destiny

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

JUBILEE – STRIKE FORCE & DESTINY

MARVEL MINIMATES

Jubilee&Dest1

Can’t stray from the Minimates reviews for too long, that would just be unorthodox, right? Right. I’ve actually fallen a bit behind on the ‘mate reviews as of late. I totally meant to have the Marvel Minimates Series 60 reviews done quite a while ago. Like, in June. But then I had other stuff going on and they just got away from me. Ooops…. So, let’s wrap this Series up by looking at the last set, Jubilee and Destiny.

THE FIGURES THEMSELVES

This pair was released as part of the 60th Series of Marvel Minimates, and follows the series’ general X-Men vs Brotherhood theme. This set was this particular series’ resident shortpack, and it’s also the only set in the series not to offer a second X-Man.

JUBILEE – STRIKE FORCE

Jubilee&Dest2This figure marks Jubilee’s third entry in the Marvel Minimates line, which is a surprising number for a character who was only in the public eye for a single decade. But hey, 90s X-Men, what are you gonna do? Jubilee, like the rest of this series’ X-Men, is presented here in her Strike Force uniform. It’s not really one of her standard looks, but she fits with the rest of the team. The figure stands 2 ½ inches tall and sports 14 points of articulation. She has sculpted parts for her hair/sunglasses, gloves, and leg straps. The uniform parts are the same as the rest of the X-Men; they’re good matches for the source material and are very nicely sculpted parts. At first glance, I thought the hairpiece might be re-used from X-Force’s Boom-Boom, but it’s all new. There are two pieces: one with the glasses down and one with them up. Jubilee wore them both ways pretty consistently, so the option is definitely appreciated. Both pieces are quite nicely sculpted. The glasses are straight and symmetrical and the hair has a nice dynamic flow to it. Jubilee’s paint is a bit on the spotty side. The detail lines are all clean, especially on the face, so that’s alright. The real issue is on the breaks between the yellow and blue portions of the costume, which are really sloppy. She also has the same belt buckle issue as the rest of this series’ X-Men, but at least their consistent. In addition to the spare hairpiece, Jubilee includes a pair of energy pieces to clip on her hands and a clear display stand.

DESTINY

Jubilee&Dest3Destiny was a longtime member of the Brotherhood of Evil Mutants, but she’s been entirely absent from the world of toys. So, this is not only her first ever Minimate, but also her first ever action figure, period. That’s pretty nifty. She’s built on the standard Minimate body, so she has the same height and articulation as Jubilee. Destiny features two additional sculpted parts: her mask and her cape. The mask s the same simple mask piece we’ve seen so many times before. It does the job alright, but I wouldn’t have minded getting a mask that replicated Destiny’s more distinctive head shape. The cape is the same as that seen on the AvX boxed set’s Scarlet Witch. It’s a nice piece with a simple but elegant flow to it. Destiny’s paint is much nicer than Jubilee’s. The colors are great, and everything stays where it’s supposed to. Under the mask, there’s a fully detailed face, which features a ton of line work, effectively conveying the elderly Destiny. Destiny is packed with a spare hairpiece (re-used from Series 45’s Maria Hill) and a clear display stand.

THE ME HALF OF THE EQUATION

These two are the last piece of the full set of Series 60 I purchased via Big Bad Toy Store. This set is pretty well handled. Jubilee has a few issues with paint, but otherwise she’s a pretty decent version of a fairly essential member of the 90s X-Men. Destiny steps things up in terms of quality, which is nice. She’s not the most exciting figure ever made, but it’s cool to finally have her.

90sXMenMates

#0661: Eleventh Doctor

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ELEVENTH DOCTOR

DOCTOR WHO

EleventhToD1

So, my favorite Doctor is definitely David Tennant’s Tenth Doctor. That said, I have a pretty great appreciation for his successor Matt Smith, who definitely made the role his own. Unlike a lot of other Whovians, I actually didn’t mind Smith’s last few episodes and I was pretty happy with his send off in “Time of the Doctor.” Though I like Smith quite a bit, my only Eleventh Doctor figure in my collection was a non-standard Christmas episode version. Fortunately, that changed.

THE FIGURE ITSELF

EleventhToD2The Eleventh Doctor is part of Underground Toys’ 5-inch Doctor Who line. He was released in early 2015 as part of a special collector’s “set,” released to commemorate Matt Smith’s last episode, “Time of the Doctor.” The figure stands 5 inches tall and has 20 points of articulation. The figure is, obviously, based on Eleven’s appearance in “Time of the Doctor.” While his look in the last half of the series changed from episode to episode, the long purple coat is a nice summation of his later appearances. The figure uses the hands and legs of a few of the previous versions of Eleven, but the rest of the sculpt appears to be all-new to this figure. The likeness on the head still isn’t 100% Matt Smith, but I think it’s probably the best version we’ve gotten so far. Regardless of likeness, it’s a top-notch sculpt, with lots of great fine detail work. The coat has some fantastic texturing, which really showcases its distinctive pattern pretty well. The EleventhToD3body as a whole is also just a lot better proportioned than prior Who figures. Great to see them finally getting these things down right as they move away from the scale, right? Eleven exhibits some of the best paintwork I’ve seen on a Doctor Who figure, which is great to see. Everything is nice and clean, the colors are well matched, and there’s plenty of small detail. The face is a little too clean, and the eyes feel a little lifeless, but he’s pretty good overall. The Doctor is quite well accessorized, including his sonic screwdriver, Handles (the beheaded Cyberman who serves as his companion for a good portion of the episode), an aged Eleven head, a cane, a shirt/vest piece sans bowtie, and a Twelfth Doctor head. Handles is definitely my favorite extra; he’s very nicely detailed both in paint and in sculpt and represents one of my favorite parts of the episode. The extra heads both swap out relatively easily, as does the extra vest. The Old Eleven head has a pretty decent Smith likeness, but I’m not seeing much of Capaldi in the Twelve head. Still, they’re both great from a technical standpoint and they make for some really fun additions.

THE ME HALF OF THE EQUATION

It’s a Doctor Who figure. You get no points for guessing where this guy came from. Yep, this guy was a birthday present from my Super Awesome Girlfriend, who continues to live up to her name. This figure is really well done. In fact, I think he may well be the best Doctor Who item that I’ve gotten. He’s that good.

EleventhToD4

#0660: Spartan ODST & Active Camouflage Arbiter

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

SPARTAN ODST & ACTIVE CAMOUFLAGE ARBITER

HALO MINIMATES

ODST&Arbiter1

What’s this? Halo Minimates? Surely this must be a guest review! Nope, it’s still good ol’ Ethan, doing what he does best. I’ve been steadily getting more and more into the Halo games, which has done a great job of making me check out all of the tons of Halo merch from over the years. Not surprising anyone, one of my first purchases was a set of Minimates.  What a shock. So, let’s have a look at the Spartan ODST and Active Camouflage Arbiter.

THE FIGURES THEMSELVES

This pair was released in the second series of two-packs in the Halo Minimates line, which were released exclusively at Toys R Us.

SPARTAN ODST (BLUE)

ODST&Arbiter2The Spartans are the bread and butter of the Halo franchise, so they cropped up quite a bit in these sets. The figure is about 2 ½ inches tall and features 12 points of articulation (due to the boots). This particular Spartan has the basic Spartan Mark IV armor, but features the ODST (Orbital Drop Shock Trooper) helmet. The ODSTs are themselves not Spartans, just normal guys who assist the Spartans throughout the games, but in Halo 3 (and Halo: Reach) you can customize your Spartan to wear one of their helmets. The figure has quite a few add-ons; ten in all. They are the helmet, torso, shoulder pads, gloves, belt, thigh armor, and boots. The body armor is all the same as the various other base Spartans in the line. It’s quite nicely detailed and fitted pretty nicely to the Minimate body. It’s a little on the bulky side, but that sort of comes with the territory. The helmet is the same one used on the ODST Rookie and the three other Spartan ODSTs. It’s pretty decently handled and matches up well with the armor on the body. If I’m being a bit picky, the visor seems a little thin, but other than that, it’s pretty great. Paint was pretty key on a lot of the Spartans, as it was the main thing that differentiated all of them. This one is, as noted by the name, blue, which is a pretty striking color for a Spartan. The blue is nice and bold and cleanly applied. The gold on the visor is a little sloppy on the edges, but not atrocious. The figure also has some pretty cool detailing on the black under suit, which keeps the figure from being too basic. The Spartan ODST included a battle rifle (which, according to my resident toy gun expert Tim is a Halo 3 battle rifle).

ACTIVE CAMOFLAGE ARBITER

ODST&Arbiter3The Covenant Elite certainly don’t intend to let the Spartans have all the fun, not even in the whole “having the main character” department, so, behold, the Arbiter, the second best thing to come out of Halo 2 (after dual-wielding). One of the neat things about the Elite is that their base armor ability is Camo, which makes sneaking around pretty darn easy. This figure replicates that effect. He’s a little taller than the Spartan and has a whole 13 points of articulation, thanks to an extra point at the neck. The Arbiter has 12 non-standard sculpted pieces: helmet, head, neck, chest piece, shoulders, hands, leg armor, and feet. All of these pieces are the same as those used on the other two versions of the character, but that’s certainly not a bad thing, especially for consistency’s sake. The pieces are all very nicely sculpted and they make the Arbiter look sufficiently alien in comparison to a normal ‘mate. It’s a little hard to see some of the sculpted details on this guy, but they’re definitely there and they look pretty cool. Arbiter doesn’t have much in the way of paint, what with being all clear and such, but he does have some faint linework representing his face under the helmet, which is definitely a nice touch. The figure is packed with a pair of energy swords, because what else would you pack with the Arbiter?

THE ME HALF OF THE EQUATION

Odd as this might be, I pretty much entirely missed out on Halo Minimates when they were at retail. That said, this is actually my second set of them (I got my first on clearance at Toys R Us, based solely on the fact that they were Minimates). I found this set (along with way too much other stuff) at Yesterday’s Fun, while on vacation. I really like this set because it has two of my favorite things, the Arbiter and ODSTs! It’s actually a pretty fun set!

#0659: Ant-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ANT-MAN

MARVEL LEGENDS INFINITE SERIES

BlackAnt1

Well, it would seem that, as with just about every Marvel Studios film before it, Ant-Man has propelled its lead character into a new level of popularity.  It’s the kind of poularity that gets you a store exclusive, which always a pretty rad sort of deal.  The Walgreens exclusives continue to be a somewhat weird development, but, hey, it did get us another Ant-Man, so I won’t complain.

THE FIGURE ITSELF

BlackAnt2Ant-Man is the latest Walgreens exclusive from Marvel Legends Infinite Series, following up debut exclusive Agent Venom.  Unsurprisingly, this figure has been branded as part of the recently released Ant-Man Marvel Legends Infinite Series line-up.  While he’s billed as Ant-Man, he’s actually based on Black Ant, the LMD duplicate of Irredeemable Ant-Man Eric O’Grady who turned out to be a bad guy.  Aant-Man’s definitely the more recognizable name, though.  The figure is just over 6 inches tall and has 32 points of articulation.  He uses the recent Spider-Man base body, making him the first non-Spidey character to do so.  It’s definitely a nice sculpt, and it works well for the character, so it’s a good choice.  The figure gets a brand new head sculpt, as well as an add-on belt piece.  The head is quite nicely done, with plenty of sharp detail work.  It’s a nice translation of the comics design.  The belt is a little bit loose, but once it’s properly placed it looks pretty good.  Ant-Man’s paintwork is pretty well handled.  The reverse color scheme is quite striking, and the Reds and blacks are both pretty clean.  The orange details on the helmet are definitely a cool touch, as they are painted to look as though they’re illuminated.  If there’s one mark against this figure, it’s  lack of any sort of accessories.  He only has the basic fist hands, which feels a bit limiting after getting a nice selection of hands with two of the previous figures to use this body.  He also lacks any sort of mini Ant-Man, which has sort of become a staple of Ant-Man figures.  Neither of those would have required any new tooling, so the fact that this guy gets nothing is a bit of a let down.

THE ME HALF OF THE EQUATION

Another Walgreens exclusive, another round of trying to find Walgreens locations near me that actually carry their exclusives.  In actuallity, finding him wasn’t that hard, since I discovered there’s a Walgreens rather close to me that manages to have a pretty decent selection of toys at most times.  So, no real issues with this guy.  Though I’m not a big fan of the storyline he comes from, I must admit to quite liking this figure.  I’d love to see him repainted into more traditional Ant-Man colors, though, if anyone at Hasbro is reading.

#0658: Rhino

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

RHINO

MARVEL LEGENDS INFINITE SERIES

Rhino1

Ha ha! We’ve reached the end of the set! Yes, after a week of Marvel Legends reviews, it’s time for the review of the Build-A-Figure. No putting it off this time, I swear. This time, it’s one of Spider-Man’s better known foes, the Rhino. He’s a dude in a rhino suit. That’s it. Some things are just simple. Unless you’re in Amazing Spider-Man 2. But we’re not, so yay! Let’s look at the figure already!

THE FIGURE ITSELF

Rhino2Rhino is the Build-A-Figure for the third set of Spider-Man Marvel Legends Infinite Series figures. This is the second time Rhino’s been featured in the Legends line, and the third time he’s been featured in this scale, but it’s the first time Hasbro’s taken a stab at him in this scale and the first figure in quite some time. The figure stands roughly 7 ½ inches tall and sports 28 points of articulation, which is actually pretty impressive given the bulk of the figure. Rhino features a brand new sculpt, and a pretty great one at that. The proportions of the figure are pretty great; they’re exaggerated, but in a balanced way, which gives him a nice, solid look. The “hide” of the suit is incredibly well-detailed, on just about every visible surface, and feels pretty unique to the character. I’ll be curious to see if Hasbro is able to find another use for this sculpt. The shoulder pads are removable, if you so choose, which is a nice option, I guess. The figure features two head sculpts, allowing Rhino to be displayed as either his modern or classic look. The fully cowl-ed modern head is more on the calm side, but still looks intense enough for some decent action poses. It’s also got a second, smaller horn, which differentiates it from the second head. The open-faced classic head is more extreme in expression, and I’m not quite sure how I feel about that. On the one hand, it’s well sculpted, and it makes for some really fun potential poses. On the other, it’s a little on the goofy side, and looks absolutely ridiculous in any sort of normal standing pose. It’s not helped by the fact that the paint’s a little wonky on the classic head, particularly around the eyes (a common theme for this particular series, sadly.) The other head fairs a bit better, mostly due to the lack of pupils. The body is mostly just molded in grey, but there’s a nice wash to help bring out the texture, which looks pretty good. Aside from the extra head, Rhino has no accessories, being an accessory himself. Honestly, the head is more than expected, so kudos to Hasbro there.

THE ME HALF OF THE EQUATION

I hadn’t initially planned on finishing this figure, mostly due to not really wanting all of the figures in the series. But, I did like the look of him, and getting a full set proved easier and more cost effective than tracking down singles. So, here he is. I actually really like him. I wish the paint on the classic head was a bit better, but the modern head is pretty great, and I love the body sculpt. This feels like a pretty worthy version of the character.

Rhino3

#0657: Chameleon

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CHAMELEON – SAVAGE FORCE

MARVEL LEGENDS INFINITE SERIES

Chameleon1

Spider-Man has a pretty decent rogue’s gallery. Given just how popular their main foe is, they are no strangers to toys. That said, some of them aren’t as sure a sale as others, resulting in less toys for them. Chameleon has often been in that boat, but he’s not completely absent from the toy world, despite the fact that he’s actually Spider-Man’s first costumed foe. Hasbro just granted him his first 6 inch scale figure, courtesy of the latest set of Marvel Legends.

THE FIGURE ITSELF

Chameleon2Chameleon is the last figure in the third round of Spider-Man Marvel Legends Infinite Series figures. His packaged name is “Savage Force,” the same as Kraven, though the two have no overlap in terms of parts or accessories. The figure is roughly 6 inches tall and has 30 points of articulation. His body is the same as that of Agent Coulson from the SHIELD set released earlier this year. It’s nice to see it back in circulation so soon, and it’s definitely nice to see it on a single release figure. With the exception of his elbows being set just a tab bit too low, it’s a really nice sculpt, and it’s easily one of the best suit bucks on the market. Chameleon gets a new head, showcasing his blank canvas-style face. It’s simple, but at the same time incredibly detailed. It looks perfect for the character, which is what matters. In addition to his main Chameleon head, the figure also includes two more heads, to showcase Chameleon’s master of disguise schtick. The heads are J Jonah Jameson and Hammerhead, two mainstays of the Spider-verse. Both pieces are well sculpted, but the Jonah sculpt is definitely my favorite of the two. The only real issue is that Chameleon’s body isn’t quite right for either of them; the colors don’t seem right for Jonah and the size is definitely too small for Hammerhead. But, it’s good to have them, and they work well for the whole disguise gimmick, so I can’t really complain. Chameleon’s paintwork is pretty decent, if somewhat basic. The suit is pretty much all solid molded colors, but things like the shiny shoes and really dark tie do a lot to add some dimension. The basic Chameleon head has some nice, subtle blue airbrushing to help accentuate the details, and the two extra heads both have nice base color work. Aside from the extra heads I already covered, Chameleon also includes three guns (a traditional tommy gun, and funky sci-fi guns in both large and small sizes) and the final piece to Rhino.

Chameleon3 Chameleon4 Chameleon7 Chameleon12

THE ME HALF OF THE EQUATION

I don’t know why, but I’ve always really liked Chameleon. I even had his wonky-costumed 5 inch figure back in the day. So, I was pretty happy to see him as a part of this series. The final figure turned out even better than I’d hoped. The Coulson body is still really cool, and the base Chameleon head is just perfection. Throw in some really fun extras and you’ve got quite a winner of a figure.

Chameleon5

#0656: Ghost Rider

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

GHOST RIDER – HEROES FOR HIRE

MARVEL LEGENDS INFINITE SERIES

GRML1It may be surprising, given how many 90s tropes he fulfills, but Ghost Rider is actually one of Marvel’s more prominent 70s characters. The character now seems to be eternally linked to the 90s grunge style, however, he started off as a supernatural take on Evil Kinneval, definite a 70s icon. He was even a member of one the most 70s teams in their roster, The Champions. He’s so 70s, which, if you’ll recall from my Misty Knight review, I quite like. The original version of Ghost Rider isn’t as privy to toys as later versions, but Hasbro did see fit to add him to their most recent round of Marvel Legends

THE FIGURE ITSELF

GRML2Ghost Rider is the sixth figure in the third round of Spider-Man Marvel Legends Infinte Series figures.  Officially, he’s named “Heroes For Hire,” a name he shares with series-mate Misty Knight.  Of course, that’s the only thing they share, as both figures use completely different part sets and Rider’s B-A-F piece is completely different.  It’s a little confusing.  But, as with Misty, I don’t really care what he’s called, as long as he’s a good figure.  Ghost Rider is just over 6 inches tall, with 30 points of articulation (including a moving jaw!)  as noted in the intro, this guy’s based on the classic 70s, Johnny Blaze version of the character.  The figure is built on the body of the AIM Soldier from the Cap Legends, which is a pretty good match for the design (and it’s a reuse Hasbro’s done before with their Marvel Universe line, so there’s precedent.)  In addition, he’s got a new head, neck, collar, belt, and chain piece.  The collar fits in pretty seamlessly, and the head and neck fit in very well and are nicely sculpted to boot.  The chain technically isnt accurate for classic Rider, but it’s easily removable, so that’s hardly an issue.  The paintwork on Ghost Rider is prett decent overall.  I wouldn’t mind him being a little more blue, but this coloring works well enough, and the light blue/grey accents are pretty clean.  The head is cast in clear plastic, with the bone color of the skull being gradually worked in, which makes the flame less obviously fake looking than previous versions.  The work on the eyes is also quite notable, as they appear to glow, even when not lit.  Ghost Rider’s only included extra is a piece of Rhino.  No motorcycle for a guy named Ghost Rider is a little odd, but I guess it’s hard to make these sorts of things cost out.

THE ME HALF OF THE EQUATION

I’ve never followed any of his series super closely, but I’ve always had a soft spot for Ghost Rider, particularly the classic version.  None of ToyBiz’s versions ever really hit the spot for me, so I was pretty excited to see Hasbro give their own take.  All in all, this is a pretty fantastic version of the character.  I just wish he’d included a motorcycle!

GRML4