Author Archives: Ethan Wilson

#0464: Alien Minimates

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

ALIEN, RIPLEY, KANE, & PARKER

ALIEN MINIMATES

You know how I said I hadn’t reviewed enough Minimates lately? You know what else I just haven’t reviewed enough of? Alien and Aliens stuff. Just not enough of it.

So, welcome to another Alien-themed review, which, by the way, is also yet another Christmas Review. Yeah, they seem to be the song that will not end. At this rate, I kind of expect to sporadically be reviewing last year’s Christmas gifts until this Christmas. Won’t that be fun?

When Diamond Select Toys picked up the Aliens license, there was some confusion as to whether this meant we’d also be seeing Minimates of the characters from the first movie. As it turned out, yes, though as more of their own thing, and less as a subset. So, without further ado, Alien Minimates.

THE FIGURES THEMSELVES

These four were released as part of a boxed set celebrating the 35th anniversary of Alien. They were supposed to be out last year, you know, for the actual anniversary, but they encountered a few delays, making them a mid-January 2015 release.

ALIEN

It would be ridiculous to release a set without the titular creature, so here it is! It’s referred to simply as “Alien” on the package, but this is the design most commonly known as the Big Chap, the creature from the first movie. The figure is a little over 2 ½ inches tall and it features 16 points of articulation. The figure is built on the standard Minimate body, with a non-standard head, hands, and feet, as well as an add-on for the torso and tail. From the neck down, all of the pieces are identical to those of the three Alien Warriors included in the Aliens Minimates Army Dump set. Since the Alien designs in the two movies are similar, this is a pretty sensible re-use, and the pieces are still fantastically sculpted. My only real complaint is that the hands technically should have six fingers, instead of the three fingered Aliens design, but at this scale and style that’s minor. The head is the one new piece, and it’s very well done. It features the first movie’s signature head dome, as well as the skull detailing underneath, and it looks really good. It’s also a bit bigger than the Aliens head, which looks a bit better in retrospect. The paint is also identical to the normal Aliens Warrior from the neck down, with the exception of the upper arms, which have a slight change in detailing. There’s also some detailing under the dome, outlining the skull. All of the paintwork is clean and sharp, and the detailing is really great. The Alien’s only accessory is a clear display stand.

RIPLEY

Much as you can’t do the set without the titular character, it would also be odd to get an Alien set that didn’t feature Warrant Officer Ellen Ripley, the sole survivor of the original film and the true star of the film series. Ripley is 2 ½ inches in height and features 14 points of articulation. She’s based on Ripley’s appearance from the second half of the film, while she’s running through the Nostromo avoiding the creature. She’s built on the standard Minimate body, with a sculpted hairpiece, a watch, and rolled up sleeves. The hairpiece is a re-use from For A Few Dollars More’s El Indio, which is a perfect piece for Ripley’s look… in Aliens. Sadly, it’s totally off for her look in Alien, where her hair was a fair bit longer. Looking through their back catalog of pieces, there isn’t one that’s a natural fit for Ripley in Alien, so I suppose they were just trying to make the best of what they had. It just doesn’t really work. Ripley’s paintwork is generally pretty good, aside from one issue: the likeness on the face isn’t quite there. It’s not terrible, but it doesn’t really look like Sigourney Weaver. DST did a pretty good job capturing Weaver in the Ghostbusters line, so I’m not sure what happened here. Fortunately, there are a few alternatives, so it’s not a total loss. The rest of the paint is quite well done, with lots of really great detail work, which even continues onto her back. Ripley includes a flame thrower, Jonesy the cat, and a clear display stand.

KANE

Alien35th6In spite of John Hurt’s resistance to his likeness being used, Kane seems to turn up quite a bit in Alien product. Not a huge shock, seeing as his role as the carrier of the first Xeno is pretty pivotal. Kane is depicted here in his Nostromo uniform, which he wears early in the film, prior to setting down on LV-426. I actually don’t recall him being without his jacket for very long, so it’s omission is a little odd. Seeing as the figure includes a chestburster piece, I would think his “last supper” look might be more appropriate, but I suppose DST felt like being different. The figure is roughly 2 ½ inches tall and features 14 points of articulation. Kane is built on the standard body, with a sculpted hairpiece and a watch (same as the one on Ripley). As far as I can tell, the hair is new to the figure. It seems to me that Kane probably could have made do with a re-use if it meant giving Ripley a new piece that was more appropriate, but there might be more to it than that. Regardless, the piece is well sculpted and seems like a pretty good match for his look from the movie. Kane’s paintwork is very nicely done. Everything is nice and clean, and all the colors seem just right. The likeness isn’t spot on, but I’d chalk that up to Hurt’s likeness not transferring to the style. The eyes and mouth are definitely right. Kane includes a facehugger, a chestburster, an extra head, and a clear display stand. The facehugger is a little difficult to get on at first, but it’s very well sculpted and it even features the appropriate detailing on the inside. The chestburster and extra head allow for a recreation of the memorable “birth scene.” The ‘burster is well sculpted and fits pretty well in place. It also covers enough of his torso to make this look like the appropriate uniform, so kudos to DST on that!

PARKER

Alien35th4Parker probably marks the set’s oddest inclusion, as he’s not a character who’s incredibly key to the plot. That said, he’s one of the last survivors, and my personal favorite character, so no complaints there. This figure has the notoriety of being the first Parker figure ever, so that’s cool. Parker is about 2 ½ inches tall and features 14 points of articulation. He’s based on Parker’s look roughly mid-movie, after he’s ditched his coat. The figure is built from the standard Minimate with a sculpted hairpiece. The piece is new to this figure and it’s a good translation of the look from the movie. Parker has a pretty decent paint job. His uniform is well detailed and everything is nice and clean. The only real issue I have is that his skin tone just seems to be too light for Yaphet Koto. This ends up throwing off the likeness, which is otherwise pretty spot-on. Parker includes a flamethrower, a flame attachment (though that could easily be paired with Ripley, too), and a clear display stand.

THE ME HALF OF THE EQUATION

This boxed set was a Christmas gift from my parents. I’m going to take a shot in the dark and say that it’s my last gift of the Christmas 2014 season. Obviously, this set, being based on the first movie, isn’t going to ignite me with the same excitement as the Aliens Minimates, but I do think they turned out pretty nicely. The real weak link of the set is definitely Ripley, who really isn’t accurate to her appearance in the first film. But hey, put a pulse rifle in her hands and you’ve got a pretty great Aliens Ripley, so it’s not a total loss!

#0463: Foot Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

FOOT SOLDIER

TEENAGE MUTANT NINJA TURTLES MINIMATES

You know what I haven’t reviewed enough of lately? Minimates! There have been a few Minimate reviews on the site recently, but they haven’t been from me, so I’ve kinda felt left out of the fun. But, never fear, I’m never too far from a Minimate to review!

A few months ago, I reviewed most of the figures in the K-Mart assortment of Teenage Mutant Ninja Turtles Minimates. The only figure I was unable to find was the basic Foot Soldier. Well, I found him, so here he is!

THE FIGURE ITSELF

The Foot Soldier was released in the first series of Teenage Mutant Ninja Turtles. This particular figure is from the K-Mart assortment, but the Foot Soldier was available in all of the offered assortments. The Foot Soldier is about 2 ½ inches tall and features 14 points of articulation. Like the rest of the TMNT Minimates, the Foot Soldier is based on the design from the current Nickelodeon cartoon. The figure is built on the standard Minimate body, with non-standard upper arms and upper legs, both of which are shared with the Footbot, as well as a set of straps with a sheath for the sword attached (also shared with the Footbot) and a belt piece that holds a knife. Aside from the belt, these pieces are exactly the same as those on the Footbot. They were pretty great there, and they’re pretty great here. The belt is a rather basic piece, but it works, and it helps to differentiate the two figures. Like the sculpt, the paintwork on this figure is more or less identical to the Footbot. The Footbot exhibited some of the best work of the TMNT Minimates, so that’s hardly a bad thing. Everything is clean and the details are nice and bold. I still really love the way they handled the eyes; the detail is just fantastic. The biggest difference between this figure and the Footbot is the accessory selection. This figure includes a katana, a smaller blade, a switch blade, a clear display stand, and the Kmart/TRU exclusive keychain attachment.

THE ME HALF OF THE EQUATION

After missing out on him in my initial purchase of the TMNT Minimates, I was able to track down the Foot Soldier at Super Awesome Girlfriend’s local Kmart. While it may not seem like the most exciting figure at first, especially since I already have the Footbot, I was pretty thrilled to get this figure. (Jess can attest to this; I may or may not have been sitting in the front seat of the car yelling “Foot Ninja” when I got this.)

#0462: The Governor

Posted by Ethan Wilson in Reviews and tagged with , , , ,

THE GOVERNOR

THE WALKING DEAD

So, last day of Walking Dead stuff (at least for a little while). In my review of Carol, I mentioned how the TV Show has really turned around my opinion of some of the comic characters who have made the transition.

The Governor in the comics generally seems to be a rather popular character. However, I’ve never really cared for him. To me, his over the top nature and the fact that he was completely devoid of any likeable traits just made the character rather annoying to read. In the show, he was given a much quieter demeanor and numerous episodes focusing on his rationale for the things he did. He was still a bad guy and he was still crazy, but he was a wildly more intriguing character. So, let’s have a look at the figure!

THE FIGURE ITSELF

The Governor was released in Series 6 of The Walking Dead TV-based line from McFarlane Toys. This marks the second Governor figure in the TV line, following his first figure in Series 4. The figure is a little over 5 inches tall (David Morrissey is a tall dude) and he has 23 points of articulation. Sadly, he’s the only (human) figure in this series not to get the new style hip joints, but his long coat would have restricted them anyway, so it’s not too bad. The first Governor figure was based on his look in early Season 3 (though a later look was possible with the extra eye-patched head), where as this one depicts him after he’s begun to sink more into his villainous side. In his default setup, this figure depicts the Governor from smack-dab in the middle of Season 3, but it can also represent the character’s later appearances. Starting with Series 5, each series of the line has one figure that’s built on a previous figure. The Governor takes that spot in this series. He makes use of the pelvis, legs, feet, and hands of the Series 4 Governor, as well as a slightly retooled torso, an all-new head and arms, and an add-on for his coat. Issues with the old hip articulation aside, the re-used pieces were all pretty good the first time around, and they add some nice consistency between the two figures. The new pieces are quite well sculpted, which is really great. The new head sits just a little bit too high on the neck, but the coat collar covers the issue for the most part, and the head itself is pretty fantastic. The head is really well detailed, and it’s a very good likeness of David Morrissey. Paint seems to be a pretty consistent issue with The Walking Dead figures, and the Governor is no exception. There’s a bit of slop, especially around the edges of the bandaging on the head, and the hands and lower face both have a rather inconsistent wash. Other than that, the paint is actually pretty good; the clothing is sufficiently detailed, and there’s lots of work done to bring out the details of the sculpt. The Governor includes an alternate head with an eye-patch (the same as the one included with the last Governor), an assault rifle, a handgun, and a knife. While the alternate head presents a more default look for the Governor, it’s not as well sculpted or as well painted as the bandaged one; it looks a little like his face is sliding off. The assault rifle is a nice piece, but the figure has some serious difficulty holding it, meaning he’s pretty much limited to the knife and the handgun.

THE ME HALF OF THE EQUATION

The Governor was ordered via Amazon, along with Rick and Abraham. I have to admit, he was probably the figure I was least interested in this series, for whatever reason. In hand, that all changed. I can’t say that the Governor’s really any better than any of the other figures in the series, but for whatever reason, I just really like this figure. He just looks really cool!

#0461: Abraham Ford

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ABRAHAM FORD

THE WALKING DEAD

Hey hey, more Walking Dead stuff. Today’s character, Abraham Ford, is probably one of the few characters that I was actually waiting to see on the show, as I quite liked him in the comics. The character on the show is similar to his comic counterpart, but he’s been given a different relationship with the main cast, which makes for an interesting change up. He also showed up a lot quicker as a toy than a lot of people expected. Usually, a character has a little bit of a wait after showing up on the series before they can get their own figure, but Abraham here was announced almost as soon as he’d shown up. So, here he is.

THE FIGURE ITSELF

Abraham is a part of Series 6 of The Walking Dead TV-based line from McFarlane Toys. He’s about 5 inches tall and he has 26 points of articulation, which includes the new style hips, which I am definitely a fan of. Unlike most of the figures in this series, Abraham is based on his earliest appearances in the show, though that still places his look somewhere in mid-season 4, which means he lines up pretty well with the rest of the characters in the series (with two exceptions). Abraham features an all-new sculpt, and it’s a pretty good one at that. He’s definitely a bigger guy than the others in the series, which is nice to see. It also helps to further distance him from the tiny wrists that used to plague the line. The figure has a pretty much spot on likeness of actor Michael Cudlitz, which is great to see. I’m also oddly fascinated by the gloves, which are just really well sculpted. The only real issues with the sculpt are the tops of arms, which are sculpted to look natural hanging down, but look odd when placed in other poses. While the paint on this figure is better than a lot of the others in the series, there are still some oddities about it. For the most part, the basic paint work is pretty clean and seems to avoid any real slop or bleed over. However, there’s a dark wash that’s been applied to the figure’s skin that looks odd in places. Specifically, it’s too heavy on his face, and then it just ends abruptly and starts back up further down. It looks strange. Abraham includes an MP5, a Desert Eagle, and a knife.

THE ME HALF OF THE EQUATION

Like Rick, Abraham was purchased via Amazon. I had actually seen Abraham a few times on his own, but I didn’t want to get him without the rest of the series. In hand, Abraham is one of the more solid releases from the line, though I can’t say he’s the most thrilling. Still, he’s certainly not a bad figure, and I’m sure he’ll be even more desirable once the rest of his group are released.

#0460: Rick Grimes

Posted by Ethan Wilson in Reviews and tagged with , , , ,

RICK GRIMES

THE WALKING DEAD

We now return to our regularly scheduled reviews of things Ethan actually owns!

When The Walking Dead television series first started up, McFarlane Toys was pretty quick to pick up the license to it. They kicked off the line with a few zombies, as well as lead character Rick Grimes and fan-favorite Daryl Dixon. Unfortunately, the figures weren’t exactly good. The line reformatted in Series 3, and the quality took a serious upturn. However, this left Rick, the show’s central character, without a figure that matched up with the rest of the characters. McFarlane has attempted to fix this issue, releasing a new Rick as part of the latest series.

THE FIGURE ITSELF

Rick is part of Series 6 of McFarlane Toys’ The Walking Dead TV line. The figure is roughly 5 inches in height and he has 26 points of articulation. Like Carol and Hershel, Rick sports the new style of hip joint, first introduced on the deluxe Daryl, which greatly improves the figure’s pose-ability. Previous Rick figures were based upon his appearance in the first and second seasons, but this one depicts Rick with his more rough look from seasons 3, 4, and 5. Like many of the characters on the show, his post season 3 look is more identifiable as the character, and shows the character after he’s grown more comfortable in the world of the show. Rick’s sculpt is all-new to him, and it’s generally very well done. The figure is (mostly) well-proportioned and well detailed. The figure also seems to be moving away from the odd wrist joints that have plagued the last few series, which is good to see.  The head definitely has more than a passing resemblance to Andrew Lincoln (sculpturally, anyway) and that’s nice to see in light of the last two Ricks. The torso is the only real issue; for some reason, they’ve made him slightly pear-shaped. Rick is very svelte on the show (something that tends to happen when you’re a survivor of the apocalypse who doesn’t have a consistent source of food), so it’s noticeably wrong for him to be shaped that way. As good as the sculpt is, the paint is probably the worst I’ve seen in the last few series. The clothing is okay; the colors work and they look appropriately grungy. The biggest issues lie on the face. The flesh-tones are really thick, and the hair is at best a close approximation of what staying in the lines is supposed to be. There’s a lot of slop, and a lot of spots that just seem to be missing the appropriate colors. The skin tone of the face is also too dark, which is only made worse by the fact that the skin on the rest of the figure is deathly pale. And that’s not even mentioning whatever that is that’s growing on Rick’s neck. He might want to have that checked out, it looks unhealthy. Rick includes a decent selection of accessories, which includes an alternate bandaged right hand, his signature revolver, a machete, a handgun with a silencer, and a set of clamps.

THE ME HALF OF THE EQUATION

After finding Carol and Hershel at Cosmic Comix, I decided to finish up the rest of the Series 6 set, so I purchased Rick here from Amazon. I’d be lying if I said I wasn’t just a little let down by this figure. The prototype looked really good, and I think the sculpt is genuinely a pretty good one. Sadly, the paint just isn’t up to snuff, which is a shame. Still, this is the best Rick that McFarlane’s released so far, and he’s not terrible when placed with the rest of the survivors.

#0459: Robin

Posted by Ethan Wilson in Reviews and tagged with , , ,

ROBIN

BATMAN ’66 (HOT TOYS)

Alright, here we are with the second part of our little break into “Ethan reviews someone else’s toys.” Yesterday, I took a look at the Hot Toys version of Adam West’s take on Batman from the popular 60s TV series. It’s only fitting that I follow it up by taking a look at Batman’s partner in (fighting) crime, the only bird more dangerous than a sparrow with a machine gun, Robin the Boy Wonder!

THE FIGURE ITSELF

Like Batman, Robin is part of Hot Toys’ Movie Masterpiece Series. He’s figure MMS 219, which places him directly after Batman in the numbering of the line. Robin is about 11 ½ inches tall, which makes him just a slight bit shorter than Batman, and (going by the Sideshow website) he has 30 points of articulation. He’s based on Burt Ward’s portrayal of the character in the 1960s TV show and Movie, though according to the solicitations, he’s specifically movie based.
One of HT’s claims to fame is their incredible likenesses. In all honesty, Robin isn’t one of their more spot on ones. While Batman was very clearly Adam West, the likeness is a bit more debatable on Robin. From certain angles, it definitely looks like Burt Ward, but from others it’s not quite as clear. However, the sculpted mask does a lot to fill in the blanks, so I don’t think anyone will be lost on who this is supposed to be. Overlooking the minute issues with the likeness, the sculpt features all the fantastic detailing we’ve come to expect from Hot Toys. In a similar fashion to Batman, the mask has been done as a separate piece, which gives the head sculpt the right amount of depth and layering. The paintwork on the head is nothing short of amazing. There’s absolutely no slop or bleed over, and the detailing is superb.  It looks like a real person.

Robin’s costume is made up of nine parts in total. He has his signature shirt (with different colored sleeves), a cape, a pair of shorts, and a pair of flesh tone tights, as well as a sculpted belt, boots, and gloves.  Overall, everything is pretty well tailored, though there are a few minor issues. While Ward’s costume was a little off in the movie, the shirt and shorts overemphasize this. The shirt is too short, and the shorts are too long. However, with some futzing, this could be mostly fixed. The cape also seems just a bit too short, which is even more noticeable, given the thickness of the material. The sculpted pieces are all excellent, and they match up pretty much exactly with the pieces from the show. Robin’s body is a better fit for him than the body on Batman was for that figure. Perhaps it’s due to Ward having had a more basic body type, but it seems the standard slim TrueType worked out well.

Robin is armed with a nice assortment of accessories, though not quite as many as Batman (in all fairness, Robin retailed for $15 less.) He features:

  • 8 interchangeable hands
  • Batarang
  • Bat-cuffs
  • Bat-Radio
  • Bat Rope
  • Display Stand

The figure’s hands include the following poses: a pair of fists, a pair for gripping, a pair with a two finger gesture, one looser grip, and one for receiving a fist (to replicate one of Ward’s signature poses.) Unlike Batman, these hands are more meant for posing than for accessories. Each of the hands is well sculpted, and they all swap out pretty easily.

At first, it seems like the Batarang is a piece of re-use, however closer examination shows that it’s actually a different, smaller Batarang than the one included with Batman. It’s well sculpted, and has the same hole for the Bat Rope that the other Batarang has.

The Bat-Cuffs represent another fairly standard Bat-accessory. It’s nice to see that HT thought to give Robin something not included with Batman. The cuffs are nicely done; they open and close like real cuffs, and even have a metal chain between them.

The Bat-Radio and Rope are the same as the ones included with Batman. The Bat-Radio is still a cool little piece and the Rope is still just a piece of string.

Finally, Robin includes a standard display stand. It’s been decorated with his name and the Batman ’66 logo.

THE ME HALF OF THE EQUATION

So, this is another figure belonging to my friend Lance, which he’s very kindly allowing me to review. Overall, the figure has its issues, but it’s pretty good. At first, I was a little let down by Robin, especially after the really fantastic Batman. However, placing the two figures side by side, every problem fades away. These two really make for a killer display. For once, I’m rather envious of someone else’s action figure collection.

#0458: Batman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BATMAN

BATMAN ’66 (HOT TOYS)

Okay, so today and tomorrow I’ll be doing something a little different for the site. As I’m sure readers are aware, the reviews I post here are of my own personal collection. Of course, I do have the occasional guest review, but that’s still the owners reviewing their stuff. Today, I’ll be doing my first review of an action figure that isn’t mine.

I’m no stranger to Hot Toys figures, and I even have a rather large collection of them. However, in the last year or two I’ve had to move away from them. The figures are rather expensive, and they keep getting more so, to the point that I really couldn’t keep up. This meant missing out on a number of figures I’d been looking forward to, such as today’s subject, Batman.

THE FIGURE ITSELF

Batman is part of Hot Toys’ Movie Masterpiece Series, and he’s figure MMS 218 in that particular line. Batman is roughly 12 inches in height and, according to the Sideshow website, he has 30 points of articulation. The figure is based on Adam West’s portrayal of Batman in the 60s TV show and movie. Going by the accessories, this is specifically based on the 1966 movie.

Let’s kick things off by looking at the head. Simply put, the head sculpt is phenomenal work. The cowl is an expert recreation of the one worn by West in the movie, down to the slightly droopy ears, and the underlying face is the spitting image of Adam West. The use of separate molded pieces makes it so that the figure has all the proper dimension, resulting in a sculpt that really looks like a guy wearing an actual mask. The paintwork is just as fantastic as the sculpt. Everything is incredibly clean, and the work on the skin makes him look like a miniaturized person. All of the detail work is done with the appropriate level of subtlety. The cowl has been painstakingly painted to match the actual cloth of the cape in color and sheen, which is certainly no easy feat.

Batman’s costume is made up of nine pieces. He has a basic gray bodysuit, with a cloth cape, shorts and lower cowl, as well as sculpted boots, gloves and utility belt. The bodysuit is pretty well tailored, though some of the stitching is a bit bulky. The shorts seem a little loose, but they’re better than some of HT’s previous attempts, so they’re learning. The cape is decently tailored, though it seems too thick. They’ve also placed snaps in a few places to help with placement, which are a bit cumbersome. The gloves, boots, and belt are superbly sculpted, and very nicely painted as well. I particularly like the actual metal belt buckle, which is a wonderful recreation of the original prop. Perhaps my biggest issue with the figure’s costume isn’t actually the costume, but the body beneath it. HT tries to make use of the current version of their TrueType body whenever they can, which is understandable. However, the body is definitely too fit for Adam West as Batman. So, they’ve decided to add padding to mask this. The thing is, West wasn’t overweight, or anything, just not super cut, so the end result is that the figure looks a bit too chubby for West’s Batman.
Like any good Hot Toys figure, Batman comes with a very nice assortment of accessories. The figure includes:

  • 11 interchangeable hands
  • 2 interchangeable face plates
  • Batarang
  • Shark Repellant Bat Spray
  • Bat-Radio
  • Bomb
  • Bat Rope
  • Display stand

The figure’s 11 hands include: a pair of fists, a pair for carrying the bomb, a pair for doing the Batusi, a pair for the batarang, a hand for the Shark Repellant Bat Spray, a hand for the radio, and a hand gesturing with two fingers. The majority of the hands are made for interacting with the accessories, which they do superbly, and the remaining hands allow for a lot of really fun poses. The hands are all very well sculpted, matching up to the glove pieces very well. They also swap out a lot easier than most HT hands, though they still threw in a spare set of wrist pegs, just in case any accidents happen.

In addition to the regular expression already present on the figure, he includes two more face plates with differing expressions. One features gritted teeth, allowing for a variety of more intense poses. The other is closer to the regular expression, but with the mouth open, as if Batman is about to speak or is in quiet contemplation. It’s a rather signature look for West, so it works. Both faceplates are just as good as the regular one, and they swap out with relative ease.

The Batarang is a rather standard Batman accessory, so it would be criminal for it to be excluded. The batarang is well sculpted, and fits well in the figure’s hand. It has a small hole on one end, allowing for the rope to be fed through it.

The Shark Repellant Bat Spray is one of the two very movie specific accessories included. Essentially, it’s just a spray can, but it’s well sculpted and very well painted. It fits very nicely into the appropriate hand, and it makes for a rather cool display.

The Bat-Radio is a neat little accessory, even if it doesn’t have the gravitas of some of the other accessories. It’s very well sculpted, and very accurate to the source material. It even has an actual metal loop at the top.

The Bomb (which sometimes you just can’t get rid of) is the other movie-specific accessory, and it’s probably my favorite accessory included. It’s a pretty simple piece, but it’s spot on to what it should be.

The Bat Rope is, well, rope. I didn’t take it out, but I assure you, it’s just some string.

Lastly, Batman has a display stand. It’s just the standard display stand, with his name and the Batman ’66 logo on it.

THE ME HALF OF THE EQUATION

Like I said in the intro, Batman’s not mine. I had wanted one, but I just couldn’t justify spending the money. At my family’s New Year’s Eve party this year, my friend Lance noted that I hadn’t reviewed the figure, and asked if I’d like to borrow his to review. I should point out that he said this while handing me the figure. I believe my response was a series of sounds that approximated a yes. While I’m bummed that I didn’t get one of my own, I think getting to mess around with the figure has helped dull the pain a bit. The figure has a few small flaws, but it’s a fantastic figure, and it’s easily the best West Batman on the market, perhaps even the best Batman period.

#0457: Dog Alien

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DOG ALIEN

ALIENS (NECA)

So here we are with the third and final part of the Aliens Series Three reviews. It occurred to me after getting the figures that there was in fact one from each of the first three movies in this particular assortment. For whatever reason, I felt compelled to review them in the proper order (although, to be truly proper, I’d first review Kane, then Bishop, and then the Dog Alien wouldn’t exist, but that’s splitting hairs I guess).

Since I’ve made it no secret that Aliens is perhaps my favorite movie of all time, it’s probably not a surprise that I don’t really care for Alien3, a film which did just about everything it could to murder its predecessor and piss on its grave. Were it not for a little film by the name of Man of Steel, Alien3 would easily get my vote for the worst movie ever. All that said, the movie didn’t get everything wrong. The movie’s redesign of the creature managed to not suck (though it’s still not up to par with its predecessors.) Plus, it offered another possible Xenomorph for NECA to include, so that works pretty well. Let’s see how said figure turned out!

THE FIGURE ITSELF

The Dog Alien (which, by the way, is the first NECA alien not to use “Xenomorph” in the title) was released in Series 3 of NECA’s Aliens line. It’s based on the creature from Alien3, which was either spawned from a dog or an ox, depending on which cut of the film you watch, and is known as the Dog Alien, the Runner, or the Dragon, depending on who you ask. Dog Alien seems to be the one that stuck. The Dog Alien is a whopping 9 inches tall when standing up straight and it has 39 points of articulation. Structurally, the Dog Alien is all-new. Previous NECA Xenos, including the Big Chap, all made use of at least some of the basic Aliens Warrior pieces, but that’s not the case here. From what I can tell, the details of the sculpt are an incredibly close approximation of the prop suit from the movie. The tail is incredibly long and very intricate, and the head dome rivals the Big Chap in terms of execution. As far as proportions go, it seems NECA has gone more for proportions based on the initial design and the rod puppet, which gives the creature a more inhuman appearance. NECA also seems to have toned down some of the more “gooey” aspects of the film’s design, which results in a creature that fits in better with the other Xenos and is overall sleeker looking (which further emphasizes the creature’s streamlined design.) In the movie, the Dog Alien is a bit more “colorful” than previous creatures. Like some of the design elements of the sculpt, NECA has toned this down a bit with the paint work, though the creature is still one of the more intricately painted Aliens NECA’s done. The Dog Alien is molded in back, with lots of brown used to bring out the details on the main body. It’s more than we’ve seen on previous Aliens (even the heavy handed Series 1 version) but not quite as brown as the actual prop Dog Alien. My favorite bit of paint is the work on the creature’s dome, which goes from opaque black at the front to almost completely clear on top with the perfect amount of gradation. The Dog Alien includes a special display stand, allowing its more “canine” poses to be carried out a bit easier.

THE ME HALF OF THE EQUATION

Like the other two figures in Series 3, the Dog Alien was a slightly delayed Christmas gift from my parents. On the outset, this was the figure I was the most skeptical about. I’m not a fan of the movie, and I don’t really care for how the creature looks in the film proper. In hand, this figure’s a very different story. NECA’s remained faithful to the design, while at the same time making some tweaks that result in a better overall figure. The end result is that the Dog Alien might just be the best figure in the series, which is a sentence that really surprises me.

#0456: Bishop

Posted by Ethan Wilson in Reviews and tagged with , , ,

BISHOP

ALIENS (NECA)

Alright, on to Christmas Review # 16 of 14 (try not to think about that too much).

NECA’s Aliens line is, as you can probably tell by the name, primarily based on the second movie in the Alien Franchise. That being said, NECA hasn’t been afraid to venture into some of the other movies here and there as well. For me, Aliens is the best, so while I don’t mind the occasional figure from another movie, I find myself most excited for the true Aliens-based stuff. So, of the three figures in Series Three of the line, it should be no surprise that the one I’m most excited to get is Bishop, the second film’s faithful artificial person.

THE FIGURE ITSELF

Bishop was released in Series Three of NECA’s Aliens line and he’s the only figure in the series to be actually Aliens-branded. Bishop is based on the character’s basic jump-suited appearance, which is his look for 90% of his screen time. The figure is just shy of 7 inches tall (Lance Henriksen isn’t the tallest of guys) and he has 22 points of articulation. Bishop features an all new sculpt, and unlike the vast majority of human figures in this line, it seems doubtful that this one’ll see any re-use (unless NECA really wants to give us a half-Bishop. Please?) The sculpt is the same quality as just about every other NECA sculpt. It’s not perfect; the overlay for the torso looks somewhat like a diaper at the bottom. Also, the front of the knees make the figure stand with a slight crouch, which looks odd in certain poses. However, the majority of the sculpt is very good. The likeness on the headsculpt is a pretty good Henriksen, and all of the body’s proportions seem pretty spot on. From the neck down, the paint work is superb. Everything is nice and clean, there’s some pretty great detail work, and there’s practically no bleed over or slop. There’s a little bit of paint chipping on the elbow joints, but that’s not too obvious. The paint on the head is clean, but perhaps too clean. The eyes are rather cartoony and I don’t quite know what’s going on with the outline. The eyebrows also look as if they’ve been drawn on with a sharpie. Henriksen’s eyebrows are brown and a bit bigger, so this hurts the likeness a fair bit. Bishop is packed with a flashlight, a knife, and a spare hand to hold it (for the famous knife scene). These are all pretty decent accessories, although it would have been cool to get a facehugger for him to dissect, especially since we’ve yet to actually get a properly scaled facehugger from this line. Still, the flashlight is very well done and the knife is from one of the character’s most definitive scenes, so they were well chosen.

THE ME HALF OF THE EQUATION

Bishop was part of a full set of Aliens Series Three that was given to me by my parents as a slightly delayed Christmas gift. Bishop’s the figure I was looking forward to the most from this series. Ultimately, the figure’s not perfect, but he’s pretty good. He’s well sculpted, decently accessorized, and he looks pretty great with the marines. Plus, he’s the only character in the line who actually had a scene with the Queen (though that half-Bishop would be more appropriate. Just saying…)

#0455: Kane

Posted by Ethan Wilson in Reviews and tagged with , , , ,

KANE

ALIENS (NECA)

So, hey guys, remember back in that Wolverine review I did where I indicated that there was a possibility that I might not be done with my Christmas Reviews? Yeah, turns out I wasn’t. I have this habit of asking for things that aren’t out quite in time for Christmas. Case in point, NECA’s third series of Aliens figures. But now they’re here and I’m totally stoked to get these guys reviewed!

In the second series of the line, NECA released the Big Chap, the version of the creature from the first film. This kicked off NECA’s 35th Anniversary tribute, which continues through both Series Three and Four. For Three, the figure is Kane, the ill-fated astronaut who serves as the creatures “parent.” Let’s have a look at how he turned out.

THE FIGURE ITSELF

Kane is part of NECA’s Aliens Series Three. The figure is based on Kane’s space-suited appearance, from when he, Dallas, and Lambert are exploring the derelict ship. Specifically, this figure is based on Kane from the end of that sequence, after he’s been “face-hugged.” Essentially, this serves as an excuse to release a Kane figure without the impossible to obtain John Hurt likeness. Kane is about 7 inches tall and features 24 points of articulation, which is quite impressive for this design. Kane features an all-new sculpt, though most of his sculpt was done with a bunch of re-use in mind. Series Four will see this body re-used on not one, but two other figures, and if NECA ever gets Veronica Cartwright’s likeness rights, we’re guaranteed another. To be fair, the Nostromo space suits are all built the same way, so re-use is very much warranted. The suit is fantastically sculpted; every surface is properly textured and all of the details look pretty much spot on to the movie’s design. Many pieces are made from rubber add-ons, affixed to the main figure, which adds some really great dimension to the figure. For figure specific pieces, there’s a head and a two-piece removable helmet. The helmet is a great match for the suit, and it even features the proper melting on the faceplate, replicating the facehugger’s entry-point. Under the helmet is the figure’s head, which, for being a sculpt that legally can’t be John Hurt, is remarkably movie accurate. The facehugger is a completely separate piece, glued in place, and it looks like it should. What can be seen of the head is pretty great too, looking just like John Hurt…..’s ears and hair (and just in case you’re wondering, no, there isn’t an Hurt face under the facehugger, though it does get pretty darn close). The figure’s paint is decent, though not quite as good as the sculpt. There’s a moderate amount of bleed over. The suit and armored pieces feature some nice weathering, but the armored parts are tacky, I’d assume due to some chemical reaction. Other than that, the paint is actually quite nice. I especially like the differences in the finishes on the head, which further emphasize the differences between Kane and the facehugger. Kane is packed with a flare gun and a flashlight, both of which are nicely done and movie accurate.

THE ME HALF OF THE EQUATION

Kane, along with the rest of Series Three, was a slightly delayed Christmas Gift from my supremely supportive parents. I’ll fully admit that Kane was not at the top of my list for this series. Still, it’s a pretty signature look, and it’s a good design, so I knew it had potential. Aside from the issue with the sticky armor, Kane is far beyond my expectations for the figure. He’s a really great figure, and he’s made me anxious to get some of the other space suited figures.