Category Archives: Reviews

#2477: Zeo Gold Ranger

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ZEO GOLD RANGER

POWER RANGERS: LIGHTNING COLLECTION (HASBRO)

ZEEEEEEEEOOOOOO GOOOOOOOOOOOOOOLLLLLLD!!!!!  OH YEAH!!! …ya know?

I began my last Zeo Gold Ranger review with a note that I don’t review many Power Rangers here, a statement that has become patently untrue, so I guess I can’t very fairly repeat it.  However, if I *didn’t* review many Power Rangers around here, this guy would still probably make the cut.  Why is that?  Because he’s the Zeo Gold Ranger, and the Zeo Gold Ranger is the best damn Power Ranger there is.  And I will fight you on that.  Okay, I probably won’t.  It’s okay if you don’t agree.  I’m gonna be sad, and that means you made me sad on my birthday, but I guess we’ll all learn to live with it.  I can learn to forgive.  Where was I?  Yes, the Gold Ranger review.   Excellent.

THE FIGURE ITSELF

Zeo Gold is part of Series 5 of Hasbro’s Power Rangers: The Lightning Collection, following Zeo Blue’s debuting the show’s coverage in Series 4.  But, as I noted in the review of that figure, Zeo Gold was technically the debut figure, thanks to an early release last summer as part of an SDCC two-pack last year.  At their core the two releases are the same, but there are some differences when it comes to accessories, which I’ll touch on when I get to that section of the review.  This actually marks the third Gold Ranger in the line, after the Beast Morphers and Dino Charge versions, for those keeping track of such things.  The figure stands 6 1/4 inches tall and he has 34 points of articulation.  A number of Zeo Gold’s parts are shared with Zeo Blue, but he still gets a new set of arms, lower legs, head, and armor, which keeps him looking *fairly* unique when compared to Blue.  It’s a solid selection of the parts for him, and does a really nice job of capturing the suit as seen in the show.  The torso armor is a little more floaty than I might have liked, especially when compared to the White and Green Rangers.  It’s not terrible, and the floating is preferably to being totally fixed when it comes to posability.  It’s a really nicely sculpted piece, though, and it and the helmet are definitely the coolest parts here.  On the helmet, I especially like the raised kanji element, as the Bandai figures usually didn’t have quite as nicely pronounced.  It looks really sharp here.  The paint work is overall pretty solid on this guy.  The helmet’s definitely the best, with the sharpness again really coming though, but I also really like the accenting on the chest piece.  There’s a touch of inconsistent coverage on the upper sections of the knees, but beyond that, it’s pretty good.  Now, for the change-ups from the SDCC release, the accessories.  The biggest shift is the unmasked head, because while the SDCC figure was Jason, this release is Trey of Trifecta, and gets the corresponding unmasked head.  It’s just the one Trey head, and it definitely would have been cool to get all three triplets, but only one of them actually wore the suit at a time, so I guess this is fine.  I totally don’t need three of him.  That would be silly.  It’s worth noting that the Jason head that went with Jason in the SDCC set actually got packed with the standard Mighty Morphin’ Red in Series 3, meaning it’s pretty easy to make him Jason on your own.  No matter who you prefer to have in the suit, Zeo Gold gets two sets of hands in gripping and fists, as well as a yellow effects piece (both of which were the same on the SDCC version), and his Staff of Gold, which is in a slightly different configuration than the two versions included in the SDCC set.

THE ME HALF OF THE EQUATION

As noted in the intro, Zeo Gold’s my favorite Ranger, so when be was initially released in the SDCC set, I was a little bummed, but figured a single-release was inevitable.  It was quite a wait (with two other Gold Rangers taunting me in the meantime), but he finally showed up, and boy was I excited to see him in the line-up, and he was the first figure I tore into once I got the set in-hand.  I was happy with the Legacy Collection Gold when he was released, but he’s not held up, and I was definitely glad for this upgrade.  He’s really awesome, and I’m so happy to have him.  ZEO GOLD!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for Lightning Collection, or other toys both old and new, please check out their website and their eBay storefront.

#2476: The Punisher & Battle-Damaged Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , ,

THE PUNISHER & BATTLE-DAMAGED CAPTAIN AMERICA

MARVEL MINIMATES

Following the lead of the line’s first year, the second year of Marvel Minimates augmented its main assortments with a handful of retailer and convention-exclusive packs.  While the first year’s exclusives were quite focussed in on the themes of the main assortments that year, 2004’s offerings were just as all over the place as the line itself was in its sophomore year.  This extended even within the packs, as today’s offering showcases, pairing a Captain America variant off with the Punisher of all characters.  You know, from all the times those two have hung out.

THE FIGURES THEMSELVES

The Punisher and Battle-Damaged Captain America were one of two exclusive Marvel Minimates two-packs at SDCC in 2004.  Interestingly, while the other pack, Wolverine and Mariko, used just the standard packaging, these guys came in a rather unique box, the same dimensions as the normal, but being mostly black, with just two small illustrations of the characters gracing the front of the box.  It was certainly different.

THE PUNISHER

Frank Castle made his debut into the line with this release.  In retrospect, it’s a little weird that such a prominent character (especially in 2004 terms) wound up only as an exclusive, but he got a second ‘mate at regular retail within the next year, so it wasn’t too crazy.  This figure was notable for being based on Frank’s classic spandex attire, rather than something more modern like most other releases would go for.  He’s additionally notable for being amongst the very first Marvel Minimates releases to get the C3-style feet that would become the norm.  They wouldn’t actually make it into the main line until 2005, but these exclusives got us started.  Beyond those new feet, Frank also got a hair piece that he shared with the C3 Superman, who hit the same month as this release.  It’s not awful for a more classic Punisher, so it works out alright.  His paint work is quite impressively handled, with one hell of a grizzled and angry face, plus some really cool looking artistic shading going on with the torso, hinting at his musculature, and preventing him from having too many stretches of single colors.  Unfortunately, the major drawback of this release is the accessories: there aren’t any.  Yep, the guy whose whole deal is his crazy arsenal of weapons didn’t get a single one of them.  There weren’t any tooled up at the time, I suppose, but it felt like a really major oversight on an otherwise really solid figure.

CAPTAIN AMERICA

We’d just gotten the standard version of Cap three months prior to this release, but early in the line DST was definitely gung-ho on these battle-damaged variants.  It was admittedly surprising that such a seemingly retail-driven concept found its way into a con-exclusive pack.  One has to wonder if he might have been repurposed from a more standard assortment, perhaps even a Series 5 release alongside the standard variant?  Who knows.  While this was our first Battle-Damaged Cap, he wouldn’t be our last; there was also one in the Civil War boxed set in 2008, as another exclusive offering.  Structurally, this guy was the same as his Series 5 counterpart, apart from the change to the smaller feet, of course.  All of those parts were really good the first time, and they were still good here.  The paint is obviously changed up a bit, adding in a number of cuts and damaged spots.  His face has also been tweaked to show he’s taken a bit of a beating.  It works pretty well at conveying the damage.  He gets his shield, but it’s been slightly changed up, so that it’s now the holographic replacement shield he carried for a little while.  It was nice of them to give us that extra little piece, just to keep things different.  He also got a standard hand to swap out for the gloved one, thereby allowing for a more proper attachment of the shield, and ultimately fixing the one real issue with the original release.

THE ME HALF OF THE EQUATION

Con exclusives weren’t quite as easily snagged earlier in the line, so I didn’t end up getting this one anywhere close to its original release.  Admittedly, neither figure included was really essential for me, so I wasn’t all that worried about it at the time.  However, when All Time got in their large collection of Minimates last fall, and I was filling in more and more of the gaps in my early Minimates collection, this one got really hard to pass on, so I went ahead and grabbed it.  It’s a rather fun little set, and I’m glad to finally have it.

#2475: Darth Vader with Removable Helmet

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DARTH VADER with REMOVABLE HELMET

STAR WARS: POWER OF THE FORCE II (KENNER)

“Luke Skywalker removes his father’s head gear so that Anakin may look at at his son with his own eyes for the first time. Darth Vader became one with the light side of the Force when he rescued his son from the clutches of the Emperor.”

Remember last week when I was talking about the difficulty of coming up with credible variants for certain characters in Star Wars, given how little they change between installments?  Good, because it remains relevant for today’s review!  Darth Vader’s one of those tricky things to balance for toys, because the guy’s kind of the face of the franchise, but he also looks the same in all of his appearances (to the untrained eye, anyway).  For the vintage line, he only had one figure throughout the whole three movie run, and at the outset of Power of the Force II it looked like history might repeat itself.  That standard Vader did get a re-card, and even a slight tweak on posing to keep him on shelves, but by 1998, Kenner was doing revamps on all of the core characters, and Vader found himself on the receiving end of such a revamp, one which even gave us something we’d never seen on a Vader before: a removable helmet!

THE FIGURE ITSELF

Darth Vader with Removable Helmet was added to the Power of the Force line in 1998, as the line’s third basic Vader release.  Unlike the line’s prior Vaders, which were all sort of amalgams of his designs from all three films, this one was the first to specifically replicate one design, in this case Return of the Jedi.  The figure stands a little over 3 3/4 inches tall (as they were back to acknowledging that Vader was taller), and had 7 points of articulation.  Just like the Bespin Luke figure from the same year, Vader is granted an extra point of movement on his right wrist, thanks to a removable hand (again making this a more Jedi-specific release).  I’ve actually looked at the bulk of this figure’s sculpt before, when it was used for the “Escape the Death Star” Removable Dome Vader release.  It really was the best sculpt Vader got out of PotF2, so I definitely can’t complain too much.  It’s far less beefy than the initial Vader, and even adds the missing inner robes that hadn’t actually been done in action figure form at this point.  The main distinguishing feature on this guy is the unmasked head, which is a pretty solid recreation of his unmasked appearance in the film, especially given the level of detail we typically got from this era of figure.  In terms of paint work, this figure marked another improvement for the line, with more than just the straight black of the initial Vaders from the line.  This guy also gets some of the proper silver detailing on his shoulders, plus all of the various colors he should have on his chest panel and belt.  And, of course, he gets a fully painted face under the helmet, complete with eyebrows, meaning he’s pre-Special Edition!  Vader was packed with his lightsaber (whose blade has a tendency to fade over time for this particular release), as well as a Freeze Frame.

THE ME HALF OF THE EQUATION

Add this Vader to the list of figures I didn’t have as a kid (which, to be totally fair, is all of the Potf2 figures I’ll be reviewing from here on out), but it’s one I very much wanted and never managed to get.  One of my parents’ friends had both this and the Bespin Luke when they were released, and I always wanted this guy to pair off with my own Bespin Luke, but I never quite managed it.  Over the years, I kept an eye out, but he doesn’t crop up as much as some of the other entries in the line, so it took a little while.  Fortunately for me, one wound up floating around the back room at All Time for a little bit, so I was finally able to snag him.  He’s definitely the best Vader for this line, so I’m very glad to have him.

Thanks to my friends at All Time Toys for setting me up with this guy.  They’ve got a decent back stock of Power of the Force, and other cool toys both old and new, so please check out their website and their eBay Store.

#2474: Rhino Alien

Posted by Ethan Wilson in Reviews and tagged with , , , ,

RHINO ALIEN

ALIENS (NECA)

NECA’s Aliens used to be a rather frequent feature around these parts, but the line has slowed down a little bit as of late.  The core stuff right now has been a handful of one-off releases, largely centered around Kenner-inspired variants on previously.  A few months ago, I took a look at their Kenner-ized Drake, and now I’m jumping over to another one of the Xenos.  As I’ve no doubt brought up before on this site, Kenner took the concept of the Dog Alien from Alien 3 and really ran with it, creating all sorts of Xeno off-shoots.  NECA’s crafted a few of them in their 7-inch line, and the latest of the bunch is today’s focus, the Rhino Alien!

THE FIGURE ITSELF

The Rhino Alien is a standalone release for NECA’s Aliens line, loosely meant to coincide with the Kenner Drake figure, though it’s at a different price point and in a totally different style of package than Drake.  It started hitting shelves not too long after he did, although due to some production errors I know he’s been rolling out a little more sporadically.  At full height, this figure’s a whopping 10 inches tall and has 34 points of articulation.  Of course, given that he’s based on one of the Kenner line’s quadrupedal Aliens, he’s not really meant for standing at full height, and is instead meant for posing on all fours.  Fortunately, the articulation works well enough to make both types of poses possible with this guy.  The hips can be a little tricky, but for the most part he’s pretty easily posed, and I don’t feel quite as worried about breakage as on other NECA offerings.  I’m still going to be slightly cautious, because I’ve been wronged before, but it does seem a little better.  In terms of sizing, this guy’s one of largest Xenos (barring the Queen, of course, which is in a class of its own), not just in height, but in bulk as well.  He achieves this through an all-new sculpt, and a pretty impressive one at that.  It’s somewhat patterned on Kenner’s own Rhino Alien, of course, but it’s worth noting that in terms of body construction, it seems to be taking more of its cues from Kenner’s Bull Alien.  The Kenner Rhino’s anatomy was a bit more further removed from the standard Xeno’s, while the Bull had something a little more in line with the Dog Alien’s merging of the Xeno with a quadrupedal design.  Ultimately, I think the Bull’s approach worked a little bit better, and as an added bonus, this leaves the door open for a possible Bull Alien later down the road, which would certainly not be a bad thing.  The quality of the sculpt is on par with NECA’s other Xenos, so the details are all quite sharp, and follow all of the broad strokes of the original Kenner figure, while also filling in some of those smaller parts.  The head dome has been designed to be removable, revealing a whole bunch of further details, which had been hidden under the dome.  This is probably NECA’s most impressive Xeno sculpt, honestly.  In terms of paint, the figure steps things up for Xenos.  He’s molded in orange, with black, brass, and some purples painted over top.  It makes for an incredibly impressive appearance, and looks pretty sick when it catches the light just right.  In addition to the previously mentioned removable dome, the Rhino also includes a reprint of the “Ice Storm” minicomic that was included with the original Kenner figure.  It’s definitely a fun read, but very much a product of its time.

THE ME HALF OF THE EQUATION

I haven’t been quite as completist on the Kenner-tribute Aliens as I was the movie stuff, so there were a fair number I’d missed.  Because of that, I wasn’t 100% certain I’d be getting this guy, but after seeing him in person, it was definitely hard to say no.  It’s a very, very fun piece, and definitely the best of the Xenos I’ve gotten.  It’s just so much fun to mess with, and pairs off well with the Space Marines I’ve picked up.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for NECA figures, or other toys both old and new, please check out their website and their eBay storefront.

#2473: Sugar Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

SUGAR MAN

MARVEL LEGENDS (HASBRO)

Mixed in with a lot of re-imaginings of prior characters, Age of Apocalypse did also have a few honest to gosh new characters, wholly original to this reimagined universe.  Included in that grouping is today’s focus, Sugar Man, a character that even 25 years later still has no main universe counterpart.  In fact, he’s more or less his own main universe counterpart, since he was one of the four character’s to travel into the 616 following AoA’s wrap-up, and spent a good 20 years cropping up in the background of various X-Men stories.  He’s also really gross.  Yuck.  Well, let’s review him, shall we?

THE FIGURE ITSELF

Sugar Man is the Build-A-Figure for the predictably titled “Sugar Man Series” of Marvel Legends.  Given his monstrous size and odd proportions, he’s a rather natural choice.  While this is his first Legend, it’s not actually his first figure, if you can believe it.  He managed to get a figure from Toy Biz’s 5-inch line back in the day.  The figure’s 6 1/2 inches tall, and just about as wide, and he’s got 38 points of articulation.  Though he’s got plenty of joints, he’s not exactly the most exceedingly mobile figure in the Legends line-up.  In the figure’s defense, however, a lot of the limits are imposed by the character’s design, and he’s certainly a dramatic improvement over the old ’90s figure.  Sugar Man’s sporting an all-new sculpt, which isn’t really that surprising, because really, who would he share parts with? It’s definitely an impressive sculpt, and a really hefty one, too.  The detailing is all nice and crisp, and there’s a great dynamic flair to him with the facial expression and his flailing tongue.  He is truly hideous, and I can’t really say I’d want him any other way.  Hideous is kind of Sugar Man’s game.  There’s also just a lot going on with this sculpt, from the unique gesturing on each of the hands, to the novelty buttons lining his suspenders.  Someone certainly had fun with this one.  In terms of paint, Sugar Man does a pretty solid job of translating the quite frankly rather messy color jobs the character was usually sporting in the comics into something that looks alright on a mass produced figure.  There’s a fair bit going on here, just like with the sculpt, with a fair amount of accenting, especially on the head/torso.  Sugar Man is packed with his hammer, complete with “SUGAR” inscribed on one side.  He can either hold it or keep it stored on his belt, though it’s a little tricky to get it in there, given his general shaping.

THE ME HALF OF THE EQUATION

As with a lot of AoA stuff, I can’t really say that Sugar Man was a character I was dying to have in figure form.  Heck, I don’t even have the old one.  However, he did certainly look pretty impressive, and I was already planning to grab the whole assortment, so here we are.  He’s certainly one of the most unique BaFs we’ve gotten, I’ll give him that, and he fills out the rest of the assortment well.

This is definitely one of the most focused assortments of this line we’ve gotten, what with the very defined theme and all.  My favorite is definitely Morph, who’s quite basic, but just such a clean translation of his comics design.  X-Man’s another high ranking one for me, with Jean not too far behind.  Sunfire was certainly better than I’d expected, and I guess Dark Beast isn’t too bad either.  I can kind of take or leave Weapon X and Wild Child, but I definitely knew that much going in.

#2472: Dark Beast

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

DARK BEAST

MARVEL LEGENDS (HASBRO)

“Dr. Henry McCoy constantly experiments on himself to enhance his superhuman powers.”

Within the AoA universe, there were a handful of characters who swapped over to the other team in terms of morality and good vs evil alignments.  Many former villains found themselves as reluctant heroes, but on the flipside, a few previously heroic characters became very much not so.  One of the most notable was Hank McCoy, known as Dark Beast in this new continuity.  Where the other was a kind-hearted, good-natured man who contrasted with his supranym, the AoA version was just downright evil.  He also wound up as one of the four characters to be “saved” from the AoA universe when it reverted back to the standard 616, taking him from a crossover villain to a full X-Men villain proper.

THE FIGURE ITSELF

Dark Beast is the final single-packed figure in the Sugar Man Series of Marvel Legends, and our first proper antagonist in the line-up.  It’s the first Legends Dark Beast, but not the first ever figure, as he was released as a Minimate and as an under-articulated 6-inch figure by Toy Biz back in the day.  The figure stands 7 1/2 inches tall and he has 36 points of articulation.  The torso, arms, and feet are all shared with the Caliban Series Beast from last year, which was pretty much expected from the word go, what with them technically being the same character and all.  I do have to say, it actually works a little more to this particular figure’s advantage, since Dark Beast is typically depicted as being a far more towering figure, making the extra height less of an issue here than it was with the standard release.  To fully set him apart, Dark Beast gets a new head, pelvis, and legs.  The new head replicates the further mutated appearance of McCoy from the story, with his much wilder hair, and an evil grin cracking across his face.  For the hair, there was a lot of variance in the comics as to its actual shape.  This one opts for something closer to the wacky Wolverine hair side of things, which I think ultimately helps him read a little quicker as Beast, so it works for me.  I do quite like the facial expression, and it furthers my hope to see a calmer head for the standard Beast at some point.  The new legs give Hank his funky banded metal capris he was sporting throughout the event.  They’re very ’90s.  They’re very goofy.  But, they’re also very accurate, so, hey, good job Hasbro.  Another thing that had some room for interpretation in the books was Dark Beast’s coloring.  When he initially appeared, he was very clearly grey, presumably to show he had stayed his initial furry color in this universe, but as he appeared more often, he shifted more to a darker blue shade.  This figure kind of splits the difference on that front, going for a rather dark grey with a hint of blue to it.  It’s really the best possible choice, and looks good on the figure.  His actual paint application is all pretty clean and solid, and there’s more going on with it than you might realize at first glance.  Dark Beast is packed with the same two sets of hands as his normal universe counterpart, as well as Sugar Man’s Hammer, which is meant to go with the Build-A-Figure.

THE ME HALF OF THE EQUATION

Dark Beast is an interesting concept to be sure, as well as a good excuse for Hasbro to get another use out of that mold they debuted last year, so he was definitely not a surprise addition to this line-up, nor is it a huge shock that he’s the hottest figure in the set in terms of demand.  With all that said, while I can certainly appreciate this is a well-made figure, I don’t personally find him to be quite as fun as some of the others in the set.  He’s fine, but that’s about where I leave it.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2471: Morph

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

MORPH

MARVEL LEGENDS (HASBRO)

“A natural mimic, Kevin Sydney transforms himself into any shape at will.”

Okay, it’s fine guys.  We got through Weapon X and Wild Child.  Now, we get to the good stuff.  Yeah, now we get to the best part of Age of Apocalypse: Morph!  After obscure ’60s X-foe Changeling was re-imagined as Morph in order to have a sacrificial lamb in X-Men: The Animated Series‘s pilot episode, he was then further re-imagined in 1995’s line-wide reboot with Age of Apocalypse.  Admittedly, he was so far re-imagined that he was practically a new character, but that doesn’t mean he wasn’t an *awesome* practically new character.  In fact, he was so awesome that Marvel even wound up creating an almost identical version of the character to star in Exiles, meaning today’s figure is kind of a two-fer.  Yay!

THE FIGURE ITSELF

Morph is figure 6 in the Sugar Man Series of Marvel Legends, and is notable for being the only of the single releases to actually be a new character for Legends.  While we’ve gotten two prior AoA Morphs, they were a Minimate and a 5-inch Toy Biz figure.  So, this is kind of notable, in that regard.  The figure stands 6 1/4 inches tall and he has 34 points of articulation.  Morph’s built on the 2099 base body.  In the series, his shape-shifting meant that his physique was somewhat variable, but this base is a pretty solid middle ground for his usual default.  He gets a new head, forearms, and boots, as well as a new add-on for his cape (which I wouldn’t be too shocked to see show up on the inevitable AoA Magneto).  The new parts are all pretty clean and cartoony, which is certainly appropriate for the character.  I especially like the head, because, as simple as it is, it really just hits all the proper notes.  I love the wide eyes and the slight smirk.  It’s definitely a “less is more” situation.  The new gloves and boots are surprisingly detailed for what they are, but unlike the equivalent pieces for the Bucky Cap body, they aren’t riddled with too much over texturing so as to clash with the rest of the pieces.  The cape’s an okay sculpt, but is just a touch floaty for my taste.  It’s not quite as bad as some of the earlier Hasbro capes, but it does hinder his playability just a touch.  His paint work is, like his sculpt, rather on the clean and basic side.  For the most part, I’m a fan, even of the outlining of the mouth and brow.  The only thing I’m not quite as big on is how dark the primary blue on the body suit is.  If it were just a touch brighter, I think the figure would really pop.  Morph doesn’t get any accessories of his own, which I suppose isn’t as much of a surprise given how light the rest of the set has been.  That said, it might have been nice to get a few different shape-shifting attachments.  He does get another leg for Sugar Man, though, so at least it’s not a total loss.

THE ME HALF OF THE EQUATION

So, as you may have gathered from the intro, I rather like AoA Morph.  I mean, I rather like Morph in general, in all of his many forms, but this is AoA Morph we’re talking about here, so I should maintain the focus.  I had the Toy Biz AoA Morph as a kid, and I’ve been waiting for an update since we got Blink.  This guy was at the top of my list for this set as soon as it was shown off, and he’s, unsurprisingly, my favorite figure from the set.  Sure there are a few things that might make the figure perfect, but he’s still a really, really solid figure.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2470: Weapon X

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

WEAPON X

MARVEL LEGENDS (HASBRO)

“Armed with adamantium claws and superhuman healing abilities, Weapon X joins the battle against Apocalypse.”

And we’re jumping back into the Age of Apocalypse fray.  We last left off with a figure that didn’t fill me with much enthusiasm, and we’re picking up with…another one of those.  Yeah, it’s a Wolverine episode, guys.  Oh, wait, I’m sorry…Age of Apocalypse…it’s a Weapon X episode, guys.  While others around him got new backgrounds and personalities, Logan more or less remained the same in AoA, apart from not being “Wolverine” and being down a hand.  Not that either of those ended up making much of a difference.  I guess it helps justify the toy, though.

THE FIGURE ITSELF

Weapon X is figure 5 in the Sugar Man Series, which seems surprisingly late in the number scheme for a Wolverine, but, well, I guess he’s not a Wolverine, is he?  By the way, if you guys think that joke’s going away, you’re sadly mistaken.  That joke’s here to stay, unlike the Wolverine name…or Logan’s hand…or self-respect.  This marks the third time as Legends figure for AoA Logan, but given that the last one was during the Toy Biz days, an update feels like a good call.  The figure stands 6 inches tall and he has 32 points of articulation.  Like most Logans these days, he’s built on the body from the Juggernaut Series Wolverine, with the cleaned up shins from Weapon X and a new head and forearms.  Essentially, it’s just a pretty straight update on the old figure in terms of part re-use, since that one was also built on its era’s brown costume body.  The new head’s definitely the star attraction here.  Logan’s hair got crazier and crazier as we got further into the ’90s, and in AoA it was at almost peak craziness.  That’s translated here, as this guy’s got one hell of a mane on him.  It puts all other Wolverine hair to shame, really.  How much hair gel do you think he has to use to get that all to stay in place?  I bet it’s a lot.  Like, obscene amounts.  And in a post-apocalyptic setting no less.  The intensity of the hair is matched only by the intensity of his facial expression.  This guy’s definitely feeling a need to show all of those teeth he’s got, in just the most intense way possible.  On the new forearms front, the right one’s not too different from previous releases, but the left of course gives us Logan’s stump, albeit with his claws extended from it.  The paint work on this guy is generally pretty decent.  The basics are all pretty sharp and clean, and they’ve done a respectable job handling the stubble and his arm hair.  He’s also got his signature forehead tattoos, which beg the question of how exactly does Logan manage to get tattoos?  Seems like too much thought for a ’90s comic, I suppose.  Weapon X is packed with a spare stump without the claws extended, thereby allowing for his appearance from earlier in the story, as well as one of Sugar Man’s legs.  It’s too bad we couldn’t also get an alternate burned head to fully replicate all of the looks from the two Toy Biz offerings.  That would have helped to up this figure’s appeal a little bit.

THE ME HALF OF EQUATION

I owned the Toy Biz Weapon X.  I sold the Toy Biz Weapon X (well, okay, not the burned head variant).  I didn’t really miss the Toy Biz Weapon X.  I can’t say I really felt the need for a new and improved version either.  But, I was getting the rest of the set, and I’m kind of doing this completist thing with the line, so I guess I wasn’t missing him, was I?  He’s fine.  Better than I expected, honestly.  It’s just that the AoA version of Logan isn’t really as exciting as other characters.  But, it’s not like we were going to ever get this assortment without him, so I guess it could be worse.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2469: Thing & Dr. Doom(s)

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

THING & DR. DOOM

MARVEL MINIMATES

While the first year of Marvel Minimates certainly gave us an impressive spread of Marvel characters, there were some very notable areas of the universe left completely untouched.  This included Marvel’s own first family, the Fantastic Four, who, like Captain America signaling the first of the the Avengers, were first inducted into the line via Series 5, with the group’s most marketable single member The Thing facing off against their greatest foe Dr. Doom!

THE FIGURES THEMSELVES

The Thing and Dr. Doom marked wrapped up the line-up for Marvel Minimates Series 5, also taking the variant slot for this particular assortment.  The standard pack had Thing vs a fully-armored Doom, while the variant swapped out Doom for an unmasked version.

THING

For his debut ‘mate, Ben gets a fairly classic Thing design.  He’s orange, he’s rocky, and he’s wearing blue shorts.  Sure, the shorts aren’t quite standard FF-issue, but they’re close enough for a single release.  He’s built on the standard long-footed body, of course, so he’s 2 1/4 inches tall and has 14 points of articulation.  Like Venom, Hulk, and Juggernaut, Ben’s a large character who’s not very large.  That said, with the head piece and the sculpted “Thing Fists”, he actually makes out the best of the bunch in terms of relative scaling.  He’s got cartoonish proportions, of course, but he doesn’t feel quite as scrawny as the others.  It helps that the sculpting is really good on the new parts.  It also helps that the paint does an incredibly impressive job of conveying Ben’s rocky skin, and the painted features end up matching pretty darn well to the sculpted rocks on the head and hands.  The only slight nit I have with the paint is that the face is just a touch too high on the head, which means that it doesn’t *quite* interact correctly with the head piece.

DR. DOOM

Marvel’s greatest villain was a pretty natural choice for inclusion here, but his variant ultimately falls into the same level of “this wouldn’t be a separate figure”-ness that Unmasked Daredevil had.  Whichever version you look at, he’s got the same two sculpted add-ons, one for his cloak, and the other for his belt/skirt.  The cloak is actually kind of nice, and concise.  It’s maybe not the greatest for posing, but I find it less obtrusive than the versions that followed.  The skirt piece doesn’t work quite as well, being really flat and without flow.  Even with the much more streamlined philosophy of the earlier ‘mates, it seems a bit lacking.  The paint on everything but the head is identical between the two releases.  It does okay for the most part.  The armored detailing on the arms and legs is definitely the best work.  Comparatively, the tunic feels kind of devoid of detail, but again, that’s owing a lot to the early style.  The standard Doom gets his mask, which is nicely detailed, and matches up with the rest of the armor’s details.  It’s limited to just having details where the hood reveals it, which isn’t surprising, but does mean displaying him without the cape doesn’t really work.  For the variant, we get to see Victor Von Doom’s scarred face.  It’s a more minor scarring than some depictions, but it’s still there.  Unlike the masked head, this one has detail that goes all around, even under the hood, which is actually pretty darn cool.  It just would have made much more sense to include the extra head with the standard release, is all.

THE ME HALF OF THE EQUATION

This is another one of those sets that I had as a kid, but I lost most of the parts to over the years.  I was pretty rough on these early guys.  Of course, I only had the standard Doom, so I was able to go back and get both versions when I tracked them back down again.  Thing’s not a bad little version of the character, especially within the confines of the early line.  Doom isn’t quite as cleanly interpreted here, but I think he works well-enough, and while he has some trade-offs, so would all of his eventual follow-ups.  They wrap up Marvel Minimates‘ first oddball assortment pretty nicely.

#2468: C-3PO with Removable Limbs

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

C-3PO w/ REMOVABLE LIMBS

STAR WARS: POWER OF THE FORCE II (KENNER)

“A short stay on Bespin’s Cloud City left protocol droid C-3PO dismantled and dependent on his Rebel companions.”

There’s a bit of difficulty in Star Wars lines to offer decent variants of a handful of the characters, specifically the ones whose designs don’t really change throughout the movies.  For instance?  C-3PO.  He’s got the exact same design in all three of the original films, so any OT-based line definitely has a little trouble differentiating.  Fortunately, there’s at least one solid gimme for a 3PO variant: removable limbs.  Yep, if you want to really want a good Empire variant of 3PO, all you gotta do is make those limbs removable for his encounter with the Stormtroopers in Cloud City.  The vintage line started things off, and Power of the Force II followed suit, with the figure I’m taking a look at today.

THE FIGURE ITSELF

C-3PO with Removable Limbs was added to the Power of the Force line in 1998, and was the line’s third variant of 3PO, following the initial release and the Purchase of the Droids variant.  The figure stands 3 3/4 inches tall and has 6 points of articulation…or at least he should, though the waist joint on mine definitely isn’t moving.  Stylistically, the sculpt on this guy is really similar to the revamped 3PO sculpt from the Purchase set.  Much like the various nearly identical Farmboy Lukes produced later in the line, the two sculpts aren’t really the same, but are virtually indistinguishable for the most part.  The main difference between the two, aside from the whole “removable limbs” thing, is the lack of restraining bolt on the upper torso.  Also, there’s the removable limbs.  Those are a difference, too, I suppose.  They come off pretty easily, though the way they attach does ever so slightly impact the posability a little bit.  You can still get full range out of them, but they might need to be popped out and repositioned for some poses.  Like the “Purchase” figure, this 3PO’s color scheme starts out with the vac metalizing again, but this one takes the grime even further than that figure did, making for what is probably the dirtiest of the PotF 3POs.  I’m not entirely sure why the Empire version would be the dirtiest, but I guess it could be worse.  3PO is packed with a cargo bag, perfect for placing him in and allowing him to be carried on Chewbacca’s back.

THE ME HALF OF THE EQUATION

I didn’t have this 3PO figure as a kid, but I remember seeing him on the back of the packaging, and always kind of wanting him to do the whole “carried on Chewy’s back” set-up.  I never did get it as a kid, but it was definitely on my short list when I started filling in the holes in my collection.  He’s pretty darn nifty.

Thanks to my friends at All Time Toys for setting me up with this guy.  They’ve got a decent back stock of Power of the Force, and other cool toys both old and new, so please check out their website and their eBay Store.