Category Archives: Reviews

#1858: Gabe Jones & Hydra Flame Trooper

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

GABE JONES & HYDRA FLAME TROOPER

MARVEL MINIMATES

When it came time to do the Minimates for The First Avenger, the film’s titular character was featured in most of the sets, but he did get to take a break for a few packs.  This includes today’s focus pack, which is perhaps the most obscure pairing of the bunch, Howling Commando Gabe Jones and the Hydra Flame Trooper.

THE FIGURES THEMSELVES

Gabe and the Hydra Flame Trooper were one of the two Toys R Us-exclusive pairings for The First Avenger, alongside Golden Age Cap & Dum Dum Dugan.

GABE JONES

Gabe is perhaps a less distinctive member of the Howling Commandos than Dum Dum, but he’s an important one nonetheless, and one that’s stuck around for quite a while.  He also has the notoriety of being Marvel’s first African American hero, albeit not quite one of the “super” variety.  The figure is built on the standard Minimate body, so he’s about 2 1/4 inches tall and has 14 points of articulation.  Gabe is constructed using two add-on pieces.  The first is his helmet, which is shared with Frontline Captain America.  It’s a decent, standard-issue piece, so it works well enough.  His second add-on piece is his vest, a unique piece to this particular figure.  It’s definitely another solid piece, and it has some pretty excellent detail work, especially on the bandolier.  Like others in this particular set, there’s a holster attached; I still like them better as separate pieces, but it doesn’t look terrible.  The paintwork on Gabe is pretty standard stuff.  The application is all pretty cleanly handled.  He’s a little bit drab, but that’s just his design.  His face is sporting a pretty decent likeness of Derek Luke, but, as with Dugan, the likeness isn’t that far removed from Gabe’s comic incarnation, should you want to swap this head onto one of the comic book agent bodies.  Gabe is packed with a rather large machine gun, just like the one he was carrying around in the film.  He can hold it surprisingly well, given that it’s a two-hander.  He also includes a standard issue side-arm, which is the same as the one included with Cap and Bucky.

HYDRA FLAME TROOPER

The Hydra Flame Trooper, like the basic Hydra Agents packed with Peggy and Howard, was first offered up as part of the single-packed army builders case, before being offered up a second time here.  It’s actually a pretty sensible way of filling in the line-up, since I doubt anyone’s really going to complain about a duplicate here.  The figure uses four add-on pieces for the mask/goggles, chest cap, and flamethrowers.  The mask is the same one used on the basic Agents, which is good for consistency’s sake.  The chest cap and flamethrowers are big and bulky, and a little bit restricting, but that was the case in the movie as well, so it’s not really a complaint here.  Lastly, the figure swaps out the upper legs for a pair of more detailed ones, used from the Hammerdrones.  The Flame Trooper’s paintwork is pretty straightforward stuff, really.  It’s black, with thin white detialing.  It actually looks quite good, and makes for rather a striking figure. The Flame Trooper included no accessories, but given all of the sculpted extras, I suppose that’s excusable.

THE ME HALF OF THE EQUATION

I grabbed these two from a TRU on a road trip with my my family back in 2011.  Gabe isn’t the star figure in this assortment, but he’s exactly the sort of figure you like to see come out of movie assortments.  A fun second-tier character who wouldn’t otherwise get a figure.  The Hydra Flame trooper is another fun addition to the Hydra army, based on one of the cooler designs from the movie.

#1857: ASP-7

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ASP-7

STAR WARS: POWER OF THE FORCE II (KENNER)

“From the newly-created footage in Star Wars: A New Hope – Special Edition.”

Those words are proudly splashed across the front of this figure’s packaging.  Remember when that actually would have excited people?  Remember before Lucas kept changing and changing them, and just generally ruining everything?  Pepperidge Farm remembers.  And me; I also remember, which I guess is more relevant for this site, isn’t it?

The ASP-7 was one of the many additional CGI characters added to the original trilogy during Lucas’ first CG-laden Special Edition fever dream, and is, admittedly, one of the less offensive additions.  He just hangs in the background and carry’s some metal bars around.  At least he doesn’t dance in front of the camera…or shoot first…or sound like Temuera Morrison.  Point is, things could have been way worse for old ASPy here.

THE FIGURE ITSELF

The ASP-7 was released in the 1997 assortment of Power of the Force II, right on top of that whole “Special Edition” thing.  The figure stands 3 3/4 inches tall and he has…articulation.  An exact count’s a little tricky, because it’s hard to tell what’s actually a proper joint, and what’s an un-articulated joining of the plastic.  The general gist is that this guy’s just not terribly mobile.  His sculpt was an all-new offering, and has remained unique to him.  It is simultaneously a product of its time and completely different than the rest of the line it hails from.  He’s honestly far more screen-accurate than a good chunk of the Power of the Force figures, but at the same time, that’s not saying a lot.  As a mid-90s CG model, the ASP-7’s movie counterpart was pretty devoid of detailing, and was quite rudimentary.  This figure follows suit, so while he may not have the wonky proportions of a lot of his compatriots, he also lacks a lot of the fun detail work that really allows most of the line to shine two decades later.  The paintwork on the ASP-7 is decent enough.  Like the sculpt, it matches very closely to the on-screen appearance.  Those rather generic filler gradients of the animation model come through perfectly clear here.  On the plus side, this is undoubtedly an area where it looks better on the toy than in the movie, because this styling of paintwork is fairly common place, especially in toys of this era, so he ends up looking alright.  He’s packed with a single accessory: a pile of bars, just like the ones he’s seen carrying in the movie.  I don’t think you can come up with a better accessory than that, can you?

THE ME HALF OF THE EQUATION

The ASP-7 is the penultimate figure in the selection of them I grabbed over the summer during one of Lost in Time’s sidewalk sales.  He was grabbed first and foremost because he was a figure I didn’t already have, but also because, hey, kinda nifty robot, right?  I know the actual review segment here was kind of rough on him.  He’s not the finest offering this line had, not by a long shot.  But, as with so many of the figures in this line, I still can’t help but kind of love this little guy, warts and all.

#1856: Leatherface

Posted by Ethan Wilson in Reviews and tagged with , , , ,

LEATHERFACE

SAVAGE WORLD (FUNKO)

Funko, masters at getting literally every license under the sun, got into the action figure game with ReAction, a line of figures based on the styling of Kenner’s failed Alien line (and, by extension, the styling of Kenner’s far more successful Star Wars line).  There were some gems in that run, but Funko sort of ran it into the ground, so they decided to move forward and ape *another* vintage toyline’s style.  This time, it was Masters of the Universe.  Their first offerings were from the thematically appropriate Mortal Kombat, but, as with everything they do, Funko has decided to extend the style to cover a plethora of other licenses.  The line we’re focussing on today, Savage World,  is an anthology line of sorts, based on several popular slasher franchises.  Today, I’ll be looking at Leatherface, the slasher from The Texas Chainsaw Massacre, viewed through that He-Man-esque lens.

THE FIGURE ITSELF

Leatherface is part of the five-figure first series for Savage World, alongside Michael Myers, Freddy Kruger, Jason, and Pinhead.  There are enough heavy hitters here that I’m honestly not sure there’s a Series 2 in the plans, and quite frankly, that’s for the best.  Funko’s not had the best track record of finishing things (if you don’t believe me, ask anyone of my three incomplete Serenity crews), so a one and done is alright by me.  Leatherface is 5 1/2 inches tall and he has 6 points of articulation.  His sculpt appears to be unique to him (which is actually a bit of a surprise, given the heavy parts reuse of the old Masters figures), and rather nicely sums up the intended aesthetic.  His design has, rather expectedly, gone through some notable changes to bring him more in line with that Masters thing.  Obviously, he’s super buff and cut, and quite squat, in contrast to the more schlubby look of the movies.  And to accentuate this new build, he’s also ditched his shirt, as you do.  Topping all of that off, he’s gone full-on Ash Williams, and replaced his right hand with a chainsaw attachment.  He’s also got the usual furry loincloth piece that most of the Masters had, because he just wouldn’t quite look right without it.  Admittedly, Leatherface’s classic design doesn’t seem quite as natural a fit for this style as the others in the set, but ultimately the figure makes it work pretty well.  The paint work on Leatherface is overall pretty basic.  The application is clean and sharp, and they’re are some nice smaller details, like the blood splatter details on his torso.  He doesn’t have the most eye-catching color-scheme, but that’s true to Leatherface.  He’s packed with a second hand attachment, a mallet, which swaps out with the saw hand.  It’s not as definitive as the other hand, but it’s still fun.

THE ME HALF OF THE EQUATION

So, yeah, confession?  I’ve never actually seen Texas Chainsaw Massacre all the way through.  It’s not really my kind of movie.  By extension, I have no real attachment to Leatherface.  In general, Savage World isn’t really for me, and Leatherface is perhaps the least for me of the set.  Why do I have him then?  Well, he’s not actually mine.  When All Time got in their cases of this line, this guy’s leg had popped off of its socket in the package, so they offered him up to me for review.  Yay for me!  Even for someone who doesn’t have a personal attachment to this figure, he’s pretty solid.  The whole concept’s pretty goofy, but hey, goofy’s fun.

If your interested in getting a Leatherface of your own, you can buy this exact figure from All Time’s eBay store here, or you can buy a sealed one from the web store here.

#1855: Gamorrean Guard

Posted by Ethan Wilson in Reviews and tagged with , , , ,

GAMORREAN GUARD

STAR WARS: THE BLACK SERIES (HASBRO)

“Burly, pig-like brutes who favoured axes and other primitive weapons, Gamorreans were often used as muscle by Hutt and other underworld kingpins. Jabba the Hutt employed a gang of intimidating Gamorreans to guard his palace on Tatooine.”

One of the things that makes it so easy to get really, really invested in Star Wars is all of the interestingly designed and individually maintained creatures that serve as little more than set-dressing, especially for the Original Trilogy, where each of them had to be crafted through intense prosthesis or advanced puppetry.  Sometimes, it was even a combination of the two, as was the case for today’s focus, the Gamorrean Guard.

THE FIGURE ITSELF

The Gamorrean Guard is kind of the Star Wars: The Black Series counterpart to the Archangel I reviewed last week.  He’s the first figure in a sub-set of deluxe offerings for the line.  He’s already been followed by Molloch from Solo (who I’m all but positive will be available at a Target near you for many, many years to come) and will be followed up again by General Grievous some time next year.  The Guard is a Target-exclusive, but it doesn’t look like the others in the line will be.  Time will tell.  The Guard is, of course, based on its appearance from Return of the Jedi.  The figure stands 5 1/2 inches tall and has 28 points of articulation, which includes a posable jaw.  I appreciate that Hasbro is continuing to work that feature into the more inhuman figures.  The Guard is actually surprisingly mobile, given his design; Hasbro’s put a lot of effort into giving him the most sensible and efficient articulation possible.  His unique design also warrants a unique sculpt, and, like all of the more out-there aliens we’ve gotten from this line, it’s quite a good sculpt.  Hasbro’s clearly had some fun with this one, and there’s just a ton of detailing worked it, from the slight texturing of the skin to the un-even patch-work stitching of his leather vest.  Elements such as the armored plates on the shoulders, the straps on his torso, and his helmet are separate parts, giving the sculpt a nice sense of depth, and allowing for each of those parts to have all of its proper detailing.  The loin cloth is made from faux-fur, which is a fairly traditional way of handling this part of the design in toy form.  I’m always a little skeptical about the mixed media offerings on Black Series figures, but Hasbro definitely made the right choice here; the fur just wouldn’t have looked right any other way.  The Guard’s paintwork is fairly standard faire for the line at this point, which is to say it’s nicely rendered, and suitably subtle.  It’s not going to knock anyone’s socks off, but it certainly gets the job done.  The Gamorrean Guard is packed with two axes and a staff, as seen wielded by different Guards throughout the Palace sequences of the film, thereby allowing for a bit of army building, if that’s your prerogative.

THE ME HALF OF THE EQUATION

The Guard had, initially anyway, proved rather illusive for a good number of collectors.  He showed up on Target’s site several months back, and people were able to place pre-orders, but those took their sweet time getting out there, and the figures took even longer to make it to store shelves.  I found one a couple of months ago, but I opted to spend the money on something else at the time, and when I made it back, he was long gone.  Fortunately, I lucked into a fresh case of them a couple of weeks ago, while I was out and about with Super Awesome Fiancee.  I like this figure overall.  The Guard was never a particular favorite of mine, but he does translate well to the Black Series style.  I’m cautiously approaching the rest of this “deluxe” line, though.  The Guard feels a little light for the heightened price, and Moloch even more-so.  I worry that Hasbro’s going to price themselves out of this line before they get a chance to really explore the style.

#1854: Captain Rex

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CLONE CAPTAIN REX

STAR WARS: THE BLACK SERIES (HASBRO)

“Clone Captain Rex served the Republic during the Clone Wars, often taking orders from Anakin Skywalker and Ahsoka Tano.  He viewed military service as an honor, and he always completed his mission.”

When The Black Series launched, I was sticking to a pretty firm “no prequels” rule.  Even before breaking that rule so many times over, I had a small few exceptions.  Amongst them was the focus of today’s review, Clone Captain Rex.  Introduced during the second Clone Wars cartoon, Rex has become one of the biggest break-out characters of the entire prequel era, and is, for me, one of that whole shebang’s most redeeming aspects.  And now I have yet another Rex figure.  Noice.

THE FIGURE ITSELF

Captain Rex was initially released as an exclusive to HasCon last year, before seeing a proper release as figure 59 in the main Black Series line-up, hitting stores in the same early 2018 assortment as Island Journey Rey and DJ.  This Rex, like his smaller Black Series counterpart, is based on his design from the end of the Clone Wars show, as they approached the Revenge of the Sith aesthetic.  The figure stands 6 1/4 inches tall and he has 31 points of articulation.  All of the prior Black Series Clone Trooper releases I’ve looked at have drawn from the same pool of parts.  This figure, on the other hand, uses an entirely unique sculpt.  As much as I like that old sculpt, I definitely appreciate the changed-up design here, which has sharper detailing, slightly more balanced proportions, and a much more-improved range of motion on the joints.  The articulation is definitely my favorite aspect of the new sculpt, especially the shoulders, which actually slot into the shoulder socket, rather than just pushing upward.  Like Wolffe, Rex features a removable helmet, which is reasonable enough, though I can’t say that Rex’s animated design has translated all that well to the realistic styling.  Fortunately, the helmet is very nicely sculpted and stays on tightly once in place, so you never have to take it off if you don’t want to.  Rex’s paint work is one of the best Black Series offerings I’ve gotten.  All of the base work is cleanly applied, he’s got some pretty solid weathering on the armored sections (though it gets a little heavy on his helmet and the belt), and he even has all of the tally marks, like his smaller version, no doubt tracking his kill count.  It’s a fun little touch, and I’m glad it was included here.  Rex is packed with his twin blaster pistols, which are the same ones we saw with Wolffe, and are a very sensible choice for Rex, since he was usually seen carrying them.  Like with Wolffe, to have Rex properly dual-wield them, you will need to free his left hand’s trigger finger from the other three, though.

THE ME HALF OF THE EQUATION

So, as noted, I’m a pretty big fan of Rex.  I couldn’t get the exclusive, so I was definitely down for the mass release…or I would have been if I had been able to find him anywhere.  But, try and try as I may, I had no luck with that.  Fortunately, Hasbro’s been working to get out re-freshes of some of the harder to find figures, so I was able to get in on a preorder for one of those.  It took its sweet time to get here, but he was certainly worth the wait.  By far, Rex is the strongest of the Clone Commanders we’ve gotten, and I’m really happy that I was able to get a hold of one.

#1853: Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SPIDER-MAN

MARVEL LEGENDS GAMERVERSE (HASBRO)

“Now a seasoned Super Hero, Peter Parker has been busy keeping crime off the streets as Spider-Man.  Just as he’s ready to focus on life as Peter, a new villain threatens New York City.  Faced with overwhelming odds and higher stakes, Spider-Man must rise up and be greater.”

I had originally planned to continue the Star Wars thing today, but with the passing of comics-legend Stan Lee yesterday afternoon, I’ve decided to shift focus for the purposes of today’s entry.  I never met Stan Lee, but for 23 of my 26 years, he managed to influence every day of my life, be it directly through his introductory segments during the Marvel Action Hour in the ‘90s and his numerous cameos in all of the Marvel films since, or indirectly through the universe he helped to create, and all the characters he created to populate it, and all of the important messages that he would use them to tell.  The man influenced the lives of a great many people he never even met, and taught a lot of us how to be the best versions of ourselves, while at the same time reminding us that nobody’s perfect, and that’s okay too.  Stan had great power, and he did his very best to use it responsibly.  The creation Stan was always the proudest of was Spider-Man, and so I feel it’s only fitting that in his honor, I take a look at a Spider-Man figure.

THE FIGURE ITSELF

Spider-Man is the inaugural release in the Marvel Legends Gamerverse line, which, as you may have gathered from the name, is a line devoted to the current crop of Marvel video games.  Spidey here is based on his appearance in the recent PS4-exclusive Spider-Man game, which hit just a few months ago.  The figure was initially supposed to hit closer to the game, then was pushed back to December, and then was moved up again.  The important thing is that he actually made it out.  So, yay.  The figure stands 6 1/4 inches tall and he has 34 points of articulation.  He’s built entirely from re-used parts, but Hasbro’s got a substantial enough library that it’s a reasonable way of handling certain figures, this one included.  He’s built on the 2099 body, and makes use of the head from Spider-UK.  Interestingly, this means we have a Peter Parker figure that’s not built from any Peter Parker parts.  The end result is a figure that actually has something of a John Romita Sr-styling to him (I’d love to see this same combo done up in a classic deco), which definitely works for the game’s version of our favorite wall-crawler.  The paintwork for this figure is, of course, its main selling point, since that’s what truly signifies it as a video game Spidey.  The design is nice and distinctive, and the paint is crisply applied and a solid match for the in-game appearance, all while still maintaining the currently running Legends aesthetic. Spidey is packed with two different sets of hands in thwipping poses and fists, as well as a two of the new webline piece we first saw with the House of M Spidey.  It’s a nice selection of extras, especially in light of some of the recent Spidey variants lacking the extra hands and such.

THE ME HALF OF THE EQUATION

I’ve liked the PS4 Spidey design since it was first shown off, and was definitely hoping for a figure of some sort, so when this guy was announced, I knew I’d want to get one.  Super Awesome Fiancee was nice enough to pre-order him for me through her store, which proved an especially helpful move, since this guy’s proved rather scarce since his release.  Despite being made up totally of re-used parts, this is one of my favorite Spider-Men of recent years.  He’s just an entertaining figure all-around, and a good fit for today’s theme.

Excelsior!

#1852: General Veers

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GENERAL VEERS

STAR WARS: THE BLACK SERIES (HASBRO)

“A cool and efficient leader, General Veers led the Imperial assault on Hoth, marching his AT-AT walkers across the planet’s frozen plains and destroying the massive generators powering the Rebel base’s protective energy field.”

Star Wars fans love elevating those seemingly minor characters to unexpected heights, and General Maximillian Veers is just another example of that.  The guy’s in two scenes in Empire but he’s perhaps one of the most popular ranking Imperial Officers within the fanbase, and has a fully fleshed out backstory and all sorts of other media appearances.  And now, he’s even got a Black Series figure, which I’ll be taking a look at today.

THE FIGURE ITSELF

General Veers is the latest Walgreens-exclusive Black Series release.  Samples have been showing up since early in the summer, but the proper release seems to have just started hitting in the last couple of weeks.  If the precedent set by the other Walgreens-exclusive Black Series offerings is anything to go by, he shouldn’t be tricky to track down.  The figure stands 6 inches tall and has 26 points of articulation.  Veers, rather unsurprisingly, shares quite a few parts with the Tarkin figure.  Hey, same uniform, and same basic build, so it’s definitely a sensible idea (and also goes along with the Walgreens offerings being heavy on the re-used parts).  The torso’s been slightly tweaked, to ensure he has his proper denotations of rank, and he’s got a new head and some gloved hands.  The head features a pretty solid likeness of actor Julian Glover.  It’s not quite as remarkable as the Peter Cushing likeness, but still very, very close.  The paintwork on Veers is up to the new standard with these figures.  The face is using the printed technique, which works well here, and the rest of the standard paint is fairly sharp as well.  Despite his rather brief appearance, Veers is notable for having two distinct appearances in the film.  This figure’s accessories, a standard uniform cap, and a helmet and chest plate, allow for both of those designs to be achieved with this figure.  I definitely prefer the armored look, which adds a nice unique flair to Veers, but I definitely appreciate the extra parts.  He also includes a small blaster pistol, should you want to make him even more battle-ready.

THE ME HALF OF THE EQUATION

I was pleasantly surprised to find this guy at one of my nearest Walgreens.  Veers has always been a favorite of mine (hey, I fall into that “character-elevating Star Wars fans” category; I won’t deny it), and I was definitely looking forward to this figure.  He did not disappoint.  The dual looks really add a lot to him, and he’s just a very fun offering.

#1651: Big Barda

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BIG BARDA

DC UNIVERSE CLASSICS (MATTEL)

“Born on the evil, warlike planet Apokolips, Barda was specially trained in all forms of combat by Granny Goodness. However, she fell in love with Scott Free, a child of peaceful New Genesis raised on Apokolips, and used her warrior skills to help him escape to Earth. Barda accompanied Scott, and they married after he assumed the name of Mister Miracle, world’s greatest escape artist. Since then, she has fought evil alongside her husband, both of them serving in the Justice League of America.”

When it came to DC Universe Classics‘ line-up, there was definitely a penchant for leaning heavily on Jack Kirby’s Fourth World creations.  This is something of a carry over from Kenner’s Super Powers, a line that inspired much of the DCUC line.  One prominent Fourth World member that was absent from Super Powers was Big Barda, who made her debut rather early into DCUC‘s run.

THE FIGURE ITSELF

Big Barda was released in Series 7 of DC Universe Classics.  There were two versions of the character available: with helmet and without.  As you may have pieced together from the photo at the top of the review, this one’s the un-helmeted release, which, despite not being a standard look for the character at all, ended up as the easiest of the two versions to find.  Why the decision was made to make it two separate figures, rather than just tossing in the alternate look as an accessory is anyone’s guess, but it’s just the first of the problems that plague this figure.  The figure stands 6 inches tall.  I’m gonna say that again: 6 inches tall.  So, for those of you playing the FiQ home game, double-checking the stats up against prior players reviews, you’ll note that Barda is shorter than the DCUC Mr. Miracle, despite Barda being consistently depicted as a good half foot taller than Scott, and having, you know, “Big” in her name. Kind of an issue.  What’s especially odd about this is the fact that Barda has a completely unique sculpt…so, there’s really no reason for her to be the same size as all of the other female figures.  There’s legitimately no good reason for Mattel to have so badly underscaled Barda.  Apart, of course, from the looming “they’re Mattel and thereby must suck at everything” bit they’ve got going on.  And even from an internal standpoint, she’s still really off, because her arms and legs are really quite scrawny, again, in sharp contrast to that “big” descriptor.  How did nobody along the whole process stop and go “wait, something’s not right here.”  Or maybe they just thought it was an ironic nickname?  Like “Einstein” or “tiny”?  That seems like an appropriately Mattel thing to do, I guess.  If there’s one redeeming aspect to the figure, it’s the paint.  It’s from a time when Mattel was still kind of trying at such things, so she actually has some pretty solid accenting work, especially on things like the chainmail on the arms and legs, where it really helps bring out what few strengths the sculpt actually has.  In terms of accessories, Barda was rather light.  She has her staff and one of Atom Smasher’s arms, and she can’t even hold her staff all that well.

THE ME HALF OF THE EQUATION

No super exciting story about acquiring this figure.  A friend of mine bought this figure thinking there was a helmet included, and upon discovering no helmet was included, she handed it off to me.  The sans-helmet figure wasn’t my first choice, and I mostly just kept her because I wanted to finish my Atom Smasher.  She’s a flawed figure.  I can’t really get past that.  On the plus side, with the introduction of DC Icons and its rather diminutive nature, I at least have somewhere to put her.  Yay?

#1850: Metalhead

Posted by Ethan Wilson in Reviews and tagged with , ,

METALHEAD

TEENAGE MUTANT NINJA TURTLES (2012, PLAYMATES)

Ninja Turtles?  Again?  So soon?  And in this economy?  Hey, I don’t make the rules…oh wait, yes I do.  Well, in that case, I make the rules, so if I want to review two Ninja Turtles items within a month of each other, that’s what I’m gonna do.  So, yeah…

THE FIGURE ITSELF

Metalhead was released as part of Playmates’ 2012 Teenange Mutant Ninja Turtles line, which coincided with the launch of Nickelodeon’s show that same year.  He was released in the second assortment of figures, alongside Dogpound and Fishface, and hit shelves in late 2012.  The figure stands 4 1/2 inches tall and he has 11 points of articulation.  As a non-Turtle, Metalhead is less articulated than the main characters.  That said, his Turtle-like disposition means he’s still a little more articulated than most of the other figures in the line.  His arms are rather restricted, but on the plus side, he has some solid movement in the legs, making him a very stable figure.  I like that.  Metalhead’s sculpt was all-new to him, and it’s a pretty strong one.  He and his assortment-mates marked the line’s turn to more cartoon-accurate sculpts, so Metalhead keeps in line with that, as a pretty good match for his TV counterpart.  He’s perhaps a touch squatter than Metalhead was on the show, but otherwise not bad.  I like the small details worked throughout him that take him from standard robot to a sewer-dwelling turtle robot.  I think my favorite of the bunch is definitely the shell made from a manhole cover.  That’s nifty!  The paintwork on Metalhead is passable work.  It’s fairly basic, and some of it’s prone to chipping, but it’s good enough to get the job done.  Metalhead’s one accessory was a missile, which works with the missile launching feature built into his right arm.  I’m really not all that into it, but it’s fairly innocuous without the missile in place, so it doesn’t hold the figure back.

THE ME HALF OF THE EQUATION

Metalhead hit while I was still basking in the high of having just gotten into the 2012 relaunch of TMNT. I had gotten the whole first series and was anxiously awaiting the second assortment, with Metalhead being at the top of my list.  I actually even pre-ordered him on Amazon, which marks the only time I’ve ever gotten a TMNT figure that I didn’t just grab off a store shelf.  He’s a pretty fun little figure, and really appears to the robot geek in me.

#1849: Archangel

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ARCHANGEL

MARVEL LEGENDS (HASBRO)

“Forever racked with internal conflict and dark urges, Archangel nonetheless strives to be a hero, saving the world from grim forces of evil with the aid of his impressive metallic wings.”

Back when Hasbro was first dipping their toes in the “what if Marvel Legends didn’t have to suck?” pool, I will admit, I was somewhat skeptical.  I bought exactly one of the Return of Marvel Legends era figures new, because I was totally, seriously committed to keeping to the Marvel Universe scale, you guys!  Yeah… that worked out well for me.  Though it certainly reignited interest in the line with the fans, ROML was less of a smash success with retailers, in part due to late joiners like me.  That resulted in the last two assortments at retail, the Rocket Raccoon Series and the Hit Monkey Series, to be rather under-ordered, and by extension a little on the rare side, especially now that people are looking to go back and fill in the collection.  One of the most expensive figures from the Hit Monkey Series was fan-favorite Archangel, a pretty important piece of that Jim Lee X-Men line-up that Hasbro’s really been pushing.  Fortunately, for those of us that missed out on him, Hasbro just put out a fancy new reissue!

THE FIGURE ITSELF

Archangel is a standalone release, the first figure in Hasbro’s go at deluxe releases for the Marvel Legends line.  He was originally slated for a December release, but started showing up at various establishments a few weeks ago.  The figure stands 6 1/4 inches tall and has 32 40 points of articulation.  Like the prior release, this Archangel is built on the Bucky Cap body, with an additional plug-in piece for his wings.  The base body is a good fit for Warren, just like it was the first time, so no complaints there, and they’ve even swapped out the slightly mismatched boot feet from the original with the more aesthetically matched feet from Carnage.  The add-on wings are definitely an imposing and very impressive addition to the figure.  These are definitely a far-cry from the oddly-shaped, strangely bird-like thing we got on Toy Biz’s first 6-inch Warren.  The one real downside to them is that they do make the figure rather top-heavy, so he can be a little difficult to keep standing if you don’t get the wings and the legs positioned just right relative to each other.  Of course, this is something that’s kind of an issue with literally every Archangel figure (seriously, I had a hell of a time getting my old Toy Biz 5-inch figure to stand for this review’s comparison shot), so I’m willing to give Hasbro the slightest bit of a pass on this one.  Archangel also makes use of the same head as the last figure (and by extension, the X-Force Boxed set version), depicting his usual cowled look.  I’m not sure it’s aged terribly well; it’s definitely suffering from some primo Hasbro-scowl.  Fortunately, if you don’t like that head, there are three, count ‘em three, more to chose from.  The two fully unmasked heads, depicting both Warren’s more angelic and more demonic sides, are quite smartly re-used from last year’s Adam Warlock figure.  They’re surprisingly close matches for Warren’s unmasked appearances from the ‘90s (the angelic head especially), so that’s a good catch on Hasbro’s part.  And, if your problem with the standard head is that it doesn’t cover *enough* of his head, then Hasbro’s got you covered there, too!  A repainted Blizzard/Eel head serves to depict Warren’s Death-mask from his earliest appearances as Apocalypse’s horseman.  It’s not as ingenious a re-use as the other two, but it works better than I’d expected it to.  The original Archangel’s paintwork was heavier on the metallics, which made some of the details of his costume blend together a bit more than they should have.  This new figure goes for something more on par with the very first Toy Biz figure from back in the day, which is very ‘90s, and makes the details stand out from each other much better.  In addition to all those extra heads I mentioned up above, this Archangel also comes with an extra piece that’s not actually for him, but is instead for the recent Apocalypse Build-A-Figure.  Its a clamping hand, which swaps out for the standard right hand.  Its a pretty classic way of showing off his shape-shifting powers, and I definitely appreciate being given the extra option here.

THE ME HALF OF THE EQUATION

So, as I noted above, I totally missed out on the original release Archangel, and I wasn’t about to pay his usual going rate.  But, my X-Men display has been becoming more and more complete, so Warren’s absence was more and more noticeable.  This re-release was definitely something I was very excited for, and I’m very happy with how he turned out.  I love all of the new display options, and I’m quite happy to be able to recreate the old Archangel II figure from back in the day, since that’s long been my favorite look for the character. 

Like most of my recent Legends purchases, I got Archangel from my friends at All Time Toys.  If you’re interested in buying Marvel Legends figures, or are looking for other cool toys both old and new, please check out their website and their eBay Store.