Category Archives: Reviews

#0032: Mr Mxyptlk

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MR MXYPTLK

SUPERMAN/BATMAN (DC DIRECT)

Today’s figure is technically only half a figure.  Or rather, half a two pack that was sold as a single figure.  And this figure’s only half the figure he used to be…no, wait… Sorry, I’ll come in again!

Occasionally, there is a character that is of a much smaller stature than most other characters in the line.  Toy companies have gone back and forth on how to handle releasing such characters.  Selling the character by themselves means you either have to come up with a new price point (too difficult), or overcharge for them (which pissed off the fans).  The solution that a lot of companies tend to settle on is including smaller characters as an accessory with another character.

That’s the case with today’s figure:  Mr. Mxyptlk* from DC Direct’s Superman/Batman line.   Mxy was originally packed with the Joker, but I have several Jokers and increasingly less and less space, so I just kept Mxy.

THE FIGURE ITSELF

Mxy was released as part of the fourth series of DC Direct’s Superman/Batman line.  The series was based on the S/B comic’s “With a Vengeance” story line, which was drawn by artist Ed McGuinness.  As such, Mxy’s based on McGuinness’s rendition of the character.  This isn’t really an issue, as his design stayed pretty much in line with the classic depiction of the character.  Mxy stands about 4 inches tall, and has 5 points of articulation.  The biggest tweak that McGuinness made to Mxy for the story was giving the character a top hat in place of his trademark bowler.  DC Direct decided to please everybody, though, and included both hats with the figure.  The hats are held in place via magnets in the head and each hat.  They work like a charm, and allow you two cool looks for the character.  The paint and sculpt on the figure are both done very well, translating Mcguinness’s clean style to three dimensions expertly.  The paint highlights the sculpt nicely, especially on his face, where the paint makes Mxy’s crazed look even more pronounced.

THE ME HALF OF THE EQUATION

So, as I said above, this guy was only available as part of a two pack with the Joker, who I already have several figures of.  But this is the only Mr. Mxyptlk figure that’s ever been released, or is ever likely to be released, so no way was I passing him up!  So, I bought them both and sold off Joker.  I know, that doesn’t sound like me.  But I had to draw the line somewhere!

*Pronounced: Mix-Yes-Spit-Lick.  Thanks go to Paul Dini for explaining that for everybody!

#0031: Heather Hudson & Box

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

HEATHER HUDSON & BOX

MARVEL MINIMATES

Look at that!  More Minimates!  What a rarity!  Okay, not really.   Today, I’ll be looking at two more minimates from the ever growing Marvel Minimates line.  It’s Heather Hudson & Box, members of Canadian super team Alpha Flight!  If you’re unfamiliar with Alpha Flight, they’re like the Avengers, but more ….Maple-y?

Heather Hudson is one of the more prominent members, though she typically operates under the code-name of her sometimes dead husband Vindicator.  Box is a guy who can control technology.  They’re just great!

THE FIGURES THEMSELVES

These two were part of the 14th Toys R Us Exclusive series of Marvel Minimates.

HEATHER HUDSON

Heather is shown here in her Vindicator costume, based on that of her husband, James Hudson, the original Vindicator.  She’s built on the basic Minimate body, so she’s about 2 inches tall and has 14 points of articulation.  Her mask is a sculpted piece, and she includes it with two different colored visors: Blue and Red.  I prefer the blue mostly because the red plastic of the red visor bleeds through the white paint of the mask.  Heather also includes an alternate hair-piece so that she can be displayed unmasked and a stand to simulate her flying.  Her paint is decent, though she does have a recurring issue of red plastic bleeding through the white parts of her costume.

BOX

Box is depicted in his armored up form.  I don’t know which version because I’ve never really followed the character that closely, but I feel certain that he’s had more than one look.  His built on the basic Minimate body, though he’s got some extra pieces that make him a little taller, and his sculpted boots restrict his ankle articulation, leaving him with 12 points.  Box has a good selection of sculpted parts:  Helmet, chestplate, gloves, belt and boots.  He also includes an alternate gun hand, a blast off stand and an alternate hair piece to show Box’s ghostly operator Madison Jefferies.  The paint on Box is nicely done, with little slop and no issues with bleed through.

THE ME HALF OF THE EQUATION

This set is important because it marks one of the first times I was able to purchase minimates from Toys R Us’s online store.  Of course, I had to know the sku’s because all of the set in the wave were listed as “Marvel Minimates Wave 14: Figure” but that’s beside the point!  Man TRU sucks…

#0030: The Fallen

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

THE FALLEN

MUTANT X (TOY BIZ)

Ah, Mutant X.  Man, that was such a 90s comicbook.  One that I enjoyed immensely!  Diamond Comics’ catalogue Previews offered figures of four members of the books main team “The Six”(No, I don’t really know why they didn’t offer all six.  Seems a little odd, doesn’t it.  It’s like only releasing  three of the Fantastic Four!).  Being a fan of the comic and a fan of action figures, particularly 90s Marvel figures, I of course wound up with a set.  Today, I’ll be looking at The Fallen, who was an alternate universe version of Warren Worthington III, aka Archangel.

THE FIGURE ITSELF

The Fallen stands about 5 inches tall, and has 13 points of articulation.  He also had his signature wings, which could be snapped onto his back, and were made of a soft translucent green material, with wire running through to allow them to be posed.  The wires honestly didn’t offer much poseability, but it’s the thought that counts, I suppose.  Fallen also included an X-Logo shaped stand, which is good, because he can’t stand without it due to his top heavy nature.

THE ME HALF OF THE EQUATION

Fallen, along with the other figures from the Mutant X line, was a Christmas gift from my parents.  I recall being fairly excited to open him, as he was my favorite character from the series.  Yay!

#0029: Hawkman

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HAWKMAN

DC REACTIVATED (DC DIRECT)

Okay, so today’s review marks a slight change in the format of the blog.  Up until now, I’ve been actually picking the figures I review, with a little bit of purpose, plus a slight bit of alphabetizing , with the occasional review of a figure I just got.  Well, here’s the thing:  That’s a lot of work.  And I’m lazy.  So, from here out, I’ve created a randomized list of all the stuff currently in my collection that I’ll be working from, with possibly a few deviations.  New stuff will still be filtered in when I get it, as that makes life easier.

On to today’s review!  We’re looking at Hawkman from DC Direct’s Reactivated! line.  This was a line where DC Direct would reuse older tooling with a few new pieces in order to create various classically styled versions of the characters.  The line was pretty well done, though it had the ability to be a bit hit and miss.

THE FIGURE ITSELF

Hawkman was part of the fourth series of the Reactivated! line.  He’s depicted here in the costume his Earth 2 version* wore during the many Justice League /Justice Society team-ups of the 60s and 70s.  It’s pretty much just his basic costume, but instead of a helmet that resembled a hawk, he had a generic yellow cowl.  At least it had a hawk symbol on the forehead, I guess.  It’s far from his most memorable look, but it was a look he had for a good chunk of time.  Anyway, that’s the look this figure’s based on.  He stands about 6 ½ inches tall, which puts him in scale with some of DC Direct’s other lines.  (They weren’t really good at picking a consistent scale and sticking to it).  He’s got 13 points of articulation, and a basic translucent blue stand with the Reactivated! logo on it.  His sculpting is solid, with good proportions all around, and the paint is nice and clean.  The wings are nicely textured, and have a nice wash over them to bring out the details in the sculpt.

THE ME HALF OF THE EQUATION

I got this figure because I wanted a Hawkman for my JSA, and I was always really liked the old team-ups that this look was featured in.  That’s pretty much it.

*In the sixties, DC comics decided to relaunch a number of their characters, such as Green Lantern, Flash, and Hawkman with new takes on the characters.  When they decided to bring back the original versions of those characters, as well as explain why characters like Batman and Superman could be in their 30s in both the 40s and the 60s, DC decided to come up with the concept of the multiverse. They dubbed the main earth “Earth 1” and the older earth “Earth 2.”  This concept allowed them to tell stories on both earths without having to infringe upon the validity of the other.

#0028: Leatherback

Posted by Ethan Wilson in Reviews and tagged with , , , ,

LEATHERBACK

PACIFIC RIM

Today, I’ll be looking at the final figure in the second series of NECA’s Pacific Rim figures.  This review will take a look at the lone Kaiju in this series.  I reiterate that if you don’t know what that means, stop reading now and go watch Pacific Rim.  Actually, even if you’ve already seen it and know exactly what I’m talking about, you should probably go watch it again!

On to the review…

THE FIGURE ITSELF

The figure in question is the Kaiju Leatherback.  Leatherback doesn’t actually do a large amount in the film, being largely secondary to his companion Kaiju Otachi, but what he does is fairly memorable, and he’s a good pairing with Striker Eureka, so he’s a good choice for the line.  Leatherback is in scale with the rest of the line and stands about 7 inches hunched.  He has 24 points of articulation.  The most noticeable part of the figure in hand is the serious heft that the figure possesses.  You could kill a man with this figure.  Well, maybe not kill, but seriously maim.  Anyway, the figure is pretty well sculpted, especially the texturing on the skin.  It lives up to his name.  Unfortunately, due to Leatherback’s more organic nature, the articulation is incredibly obvious, especially in comparison to the Jaegers from this series, who all work it in more naturally.

THE ME HALF OF THE EQUATION

Leatherback is probably my least favorite figure in the series, mostly due to the issues with the articulation.  However, being my least favorite in this series is far from a bad thing!  Leatherback is still a high quality figure, and is a nice contrast to the Jaegers.

#0027: Striker Eureka

Posted by Ethan Wilson in Reviews and tagged with , , , ,

STRIKER EUREKA

PACIFIC RIM

Today, I’m looking at another figure from NECA’s second series of Pacific Rim figures.  Yesterday, I looked at a variant of the main Jaeger from the film, Gipsy Danger.  Today, I’ll be covering the second most prominent Jaeger from the film:  Striker Eureka!

THE FIGURE ITSELF

Striker is built to fit in with the rest of the Pacific Rim figures, so he stands about 7 inches tall.  He has roughly 21 points of articulation.  Striker is mostly a light grey color, so the figure is molded in this color, with details added over top of it.  The detail paint is superbly done, and he has a nice wash applied all around that gives the suit a nice worn in look.  Striker’s design is very much influenced by the fighting suits from Neon Genesis Evangelion, with a design that features lots of sharp angles.  As such, it was very important for the sculpted details on this figure to be sharp.  There was a bit of concern on this point because it seemed that such details may have been lost on the Gipsy Danger sculpt, but I’m happy to say that it’s not an issue with Striker here.  Striker technically includes no accessories, thought he does have his stinger blades, which are jointed so that they can swivel back and forth, and can be removed if you so desire.

THE ME HALF OF THE EQUATION

Striker was one of my favorite of the main Jaeger designs, so it follows that it was the figure I was most looking forward to in second series, and heck, even NECA’s Pacific Rim line overall.  The figure definitely doesn’t disappoint.  I was initially a bit let down by the lack of the nuclear device that Striker has strapped to his back during the final battle, but the rest of the figure is so well done that I don’t mind so much.  Striker is some serious awesome!

#0026: Gipsy Danger – Battle Damaged

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GIPSY DANGER  – BATTLE DAMAGED

PACIFIC RIM

Okay, changing gears.  Today I’ll be looking at the first of the three figures in the second wave of NECA’s Pacific Rim line.  I just got this set, so I wanted to try to get the review up while it was still slightly relevant.  I know it’s the second wave, and I haven’t done the first, but I’ll to get to them soon enough.

Today’s figure is the main Jaeger Gipsy Danger.  If you haven’t seen the film and that confused you, stop everything and go see the movie.  Right now.  Go buy it.  I’ll wait.  Back?  Wasn’t it amazing?  The correct answer is “F*** Yes!”

THE FIGURE ITSELF

Okay, so this figure is of Gipsy Danger.  Gipsy is depicted here in her more damaged look from later in the film.  The figure stands about 7 inches tall, and has roughly 20 points of articulation.  The sculpt is really nice.  I’ve heard complaints that the details are a little gummy, but given the scale, I think they’re pretty well handled!  The paint is supposed to be the focal point of this figure, as that’s what separates it from the previous release, but let’s be honest, that’s not the reason people want this figure.  The real reason is the accessories, something that the previous release didn’t include:  Chain swords!  The chain swords are well sculpted and go in fairly easily.  However, they do have a tendency to fall out if you don’t put them in just right, so be careful.

THE ME HALF OF THE EQUATION

I have to say that, while Pacific Rim series 2 was a set I was very excited for, this version of Gipsy wasn’t something I was really looking forward to.  I was wrong.  While I still don’t feel it’s the be-all-end-all Gipsy, it’s really fun, and it makes deciding which version to put on the shelf much more difficult.

#0025: John Stewart

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

JOHN STEWART – GREEN LANTERN

DC MINIMATES

So today is yet another Minimate review.  I promise to take a bit of a break from the Minimates, but they do make up a fairly large chuck of the collection, so they’ll tend to pop up fairly often.

We’re looking at a Minimate from the DC line today.  This figure is Green Lantern John Stewart, the first Minimate produced in DC Direct’s attempted revival of the DC Minimates line after the initial Lego inspired C3 line failed.

THE FIGURE ITSELF

John was a San Diego Comic Con give away, meant to drum up interest in the full DC Minimates line.  Like many Minimate give aways, he features no additional parts, but that’s not an issue with this design.  John is built, unsurprisingly, on the basic Minimate body.  He stands about 2 inches tall and he has 14 points of articulation.  John is based on his appearance from the Justice League cartoon, which is a good look.  The lines are all very clean and sharp looking.

THE ME HALF OF THE EQUATION

Although he was released a while ago, John is a fairly recent addition to my collection.  I don’t know why, as I’m a huge Green Lantern fan and a pretty big fan of John himself, but I’d say it’s mostly to do with him only being available at SDCC.  Anyway, I’ve got one now, and he’s a great addition to my collection.

#0024: Betsy Braddock

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BETSY BRADDOCK

MARVEL MINIMATES

Today, we’re looking at another Minimate.  Once again, this one if from the extensive Marvel line.  The character in question is Betsy Braddock, sister to Captain Britain, and future X-Man(well X-Woman) Psylocke.

For those of you unaware of who Betsy is:  She’s a telepathic mutant.  There, you’re caught up.  Okay, actually there’s a lot more, but I’ll cover all that on the next Psylocke Minimate…

THE FIGURE ITSELF

Betsy is depicted here in her first “Psylocke” outfit.  She’s obviously meant to be a mid-80s Psylocke, from before she started joining in on the fighting.   She’s built on the basic Minimate body, so she stands about 2 inches tall, and has 14 points of articulation.  She has sculpted hair, though I do believe it is reused from an earlier ‘mate, and a set of unique upper arms to depict the poofy sleeves of her early look.  She’s painted in mostly variations of purple and pink.  She’s a fairly decent interpretation of the character, though she does end up looking a bit dull.

THE ME HALF OF THE EQUATION

Not much to report here.  This is admittedly my favorite look for Psylocke, but it’s not like there’s a large number of them to choose from.  I guess I like that this one kinda treads the line between her other two most prominent looks, not too covered up(the armored look) and not too skimpy(whatever the hell that was that Jim Lee put her in).  So, yeah…

#0023: Photon

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

PHOTON

MARVEL MINIMATES

Today’s review is another Minimates item.  This time the figure comes from the Marvel Minimates line.  It’s a Minimate of Photon.  I know what you’re thinking: “Who’s Photon?”  Allow me to provide an answer! Photon, aka Monica Rambeau, actually started her career under the name Captain Marvel.  She was the second (well, technically third if you count Billy Batson, now known as SHAZAM!, but Marvel Comics would prefer you didn’t) character to use the name.  She was introduced in the 80s, and was somewhat prominent for a while, joining and even leading the Avengers for a short period.  However, the character was depowered in the early 90s and fell into obscurity for a bit, until writer Warren Ellis brought her back in his series Nextwave.  Recently, she’s had a slight resurgence, but nothing major, mostly owing to the fact that she can’t seem to hold on to a code name for very long.  Anyway, she was also in 80s cross over series Secret Wars which is why the figure I’m reviewing got made in the first place.  Yeah…I know way too much about Photon.

THE FIGURE ITSELF

Photon was released as part of the Toys R Us exclusive Secret Wars boxed set.  Like the Captain America set I reviewed earlier, the set was decided by an online poll.  Guess who I voted for.  Photon is depicted in her debut costume.  She’s built on the basic Minimate body, so she stands a little over 2 inches tall.  She has 12 points of articulation, 2 less than usual for a Minimate, due to her sculpted boots.  She has sculpted hair, boots, and cape.  They’re all handled well.  The design is nice and clean, which is fitting for her character.  The black/white contrast really helps to make her stand out on the shelf.

THE ME HALF OF THE EQUATION

So, you’ll notice that I mentioned that she’s part of a 4-pack, but I’m not reviewing the others from the set.  That’s because I don’t own them.  Photon was the only character I really wanted from the set, but that’s actually not why I don’t have the others.  I’ve bought a whole set for one figure in the past, so I probably would have again if I’d been given the chance.  But…I wasn’t.  Yeah, my Toys R Us has never carried the fan poll Minimate sets, and this set predates tru.com carrying said sets, so I was never able to find this figure.  Apparently, this was a common problem with this set, given its fairly high value on ebay now.  So, still really wanting a Photon figure (The only Photon figure ever, mind you) I tracked down Photon loose, for probably a little too much money.