Category Archives: Reviews

#3264: Blackout & Scorponok

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BLACKOUT & SCORPONOK

TRANSFORMERS: MASTERPIECE MOVIE SERIES (TAKARA TOMY)

I really don’t talk about the Michael Bay Transformers movies much around here.  It’s for the pretty good reason that I just didn’t much care for any of the Michael Bay Transformers movies, so, you know, I just don’t have much call to own stuff from them, or by extension review much from them either.  Thus far, I’ve looked at a Soundwave and a Jazz, characters that, notably, I care about outside of the Bay films, so that colors the opinions ever so slightly.  On a different, but still related note, I’ve not yet reviewed anything from Takara’s long-running Masterpiece line of Transformers, which are rather high-end, generally more screen accurate figures, which also seek out proper licensing for all of their alt-modes (where needed, of course).  It’s been a running theme since 2003, at first sticking to G1 characters, but moving onto other themes, with the live action films getting their own sub-line starting in 2010.  The most recent release from the live action sub-line is actually a twofer, since it’s Blackout and Scorponok, based on their appearance in the first film, and I’m taking a look at the two of them today!

THE FIGURE ITSELF

Blackout and Scorponok are the lone 2022 release for Transformers: Masterpiece Movie Series, where it is item MPM-13.  Though billed as “Blackout and Scorponok” on the package, Blackout is clearly supposed to be the star piece, with Scorponok as an accessory.  In his robot mode, Blackout stands about 11 1/2 inches tall and he has 32 points of workable articulation.  In terms of scaling, Blackout is certainly quite a sizable figure, which is appropriate, since he was also one of the larger ‘bots in the films.  The articulation scheme is a pretty good one for a Transformer, especially one as bulky as this one.  Of particular note are the hands, which even have separately articulated fingers.  Blackout’s sculpt is a unique one (thus far, at least; if they follow the Studio Series layout, he might get a re-use for Grindor later down the line), obviously based on his film appearance.  In the movies, most of the TFs are kind of a jumbly mess of random angles when in their robot modes, and Blackout is no exception.  On the plus side, the toys, by necessity, do clean things up a little bit.  This figure does a pretty good job of doing just that, while still sticking pretty closely to the design as seen on-screen…I mean, when it can be seen, which is, admittedly, pretty tricky to do.  They sure did love to hide those designs.  Whatever the case, this one is pretty cohesive in his look, and he’s properly big and imposing, and there’s a ton of smaller sculpted details, which are pretty impressive. Blackout is packed with two mountable miniguns, two blast effects for the miniguns, and a rotorblade weapon.  The rotorblade should *technically* be mounted to the back of his hand, as opposed to being held in his hand is it is here, but otherwise it’s a pretty cool piece.  Also included is the previously mentioned Scorponok figure.  He doesn’t transform (excusable, since he doesn’t actually have an on-screen alt-mode in the first movie), but he’s at least fully articulated, which is honestly pretty cool.

As in the film, Blackout’s alt-mode is a MH-53 Pave Low helicopter, which is an officially licensed take on the vehicle.  The transformation sequence to get from robot to copter is…well, it’s certainly a complicated and lengthy one.  It’s unfortunately a side effect of how the animation models were done for the Bay films, since there wasn’t really much actual science or engineering to how they worked; just lots of small greebly bits all moving in a mess of motion.  So, this figure’s dealing with that, but it does alright by it.  Still, it would up taking me about an hour and a half to work my way through the whole thing; getting his waist properly folded into the body of the copter was, in particular, quite tricky on my copy.  All in all, it’s a bit nerve-racking, but the end result is at least pretty convincing.  He’s even got a working hatch on the rear fuselage, where you can store Scorponok.

THE ME HALF OF THE EQUATION

As I touched on in the intro, I don’t really do much with the Bay films.  I saw the first one in the theatre.  It wasn’t really for me, and I’ve not really owned any of the associated product.  So, why do I own a Masterpiece quality figure based on a not Soundwave or Jazz character?  Well, my son Matthew was determined to get me something cool for our first Christmas together, and he was apparently adamant that he needed to get this for me.  (He also apparently found it on some sort of crazy clearance, which is good, because I really don’t expect him to be spending this thing’s full retail on a present for me)  On Christmas morning, after jumping up and down with excitement over the things waiting for him under the tree, he very excitedly handed me this guy, and told me I had to open my gift first.  I was certainly surprised, I’ll say that much.  I may not really care about the first Transformers, or really Blackout as a character, but I’ll admit, he does certainly make for a quite impressive transforming robot toy.  And, you know, the whole presentation did kind of help to further my general enjoyment as well.  So there’s also that.

#3263: Rumble – Blue

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FRENZY RUMBLE — BLUE

TRANSFORMERS: STUDIO SERIES (HASBRO)

Are you guys ready for some controversy?  It’s okay, it’s nothing super important or anything.  Just a long stretching conflict going back three decades is all.  And what exactly is that conflict?  It’s simple: what is the name of Soundwave’s blue cassette buddy?  According to the vintage toy, the Marvel comics, and the Japanese version of the original cartoon, it’s Frenzy.  However, according to the US version of the cartoon, it’s Rumble, though, even then, it’s the finished product, since the series bible clearly dictates that the blue one is Frenzy.  But, since the cartoon has mass exposure, there’s still a contingent that thinks of Rumble as the blue one.  They’re wrong, of course.  The blue guy is Frenzy.  The My Little Pony crossover said so.  Definitely.  But these wrong people sometimes get thrown a bone by official channels.  And that’s why we have a Studio Series release of Rumble (Blue).  Let’s have a look, shall we?

THE FIGURE ITSELF

Frenzy Rumble (Blue) is part of the fourth Core Class assortment of Transformers: Studio Series, alongside Dark of the Moon Laserbeak and a repack of Wheelie.  Frenzy Rumble (Blue) is part of the ’86 Movie sub-set of the line, and is thus explicitly an animation-based figure.  Hence the naming.  In robot mode, Frenzy Rumble (Blue) stands a little over 2 inches tall (just a smidge taller than the Siege mold) and has 13 workable points of articulation.  Frenzy Rumble (Blue) is making use of an all-new mold, which goes for a less chunky set of proportions than the Siege mold did, as well as greater detailing and a better range of motion on the joints.  I was cool with the Siege mold at the time, and I still don’t mind it, but there’s no denying that this guy is just an improvement on the prior mold across the board.  His color scheme is, as noted by the name, blue.  Well, blue-ish at the very least.  He’s patterned on the animation colors, so he errs a bit more on the side of purple than a proper blue.  It’s a good look, and the paint application is again a little more involved than the Siege version.  Frenzy Rumble (Blue)’s alt-mode is a proper mini-cassette; though he’s larger in robot mode, he transforms into a box that’s still compatible with the Siege/Earthrise Soundwave molds.  Yay for backwards compatibility!  Frenzy Rumble (Blue) is packed with the original G1 toy’s laser drill attachments, as well as the stomper arms frequently seen in animation.

THE ME HALF OF THE EQUATION

Through an odd sequence of coincidences, I wound up with a bunch of Soundwaves that only had Frenzys to go with them, and never Rumble.  After getting to three of them, I decided I was just sticking with only getting Frenzy.  You know, the blue one.  Of course, I’ve had to go against the printed name a few times before.  The most important thing is the color.  He’s gotta be blue.  You know, because that’s the one that Frenzy is.  I got this guy as a stocking stuffer on Christmas morning, which was pretty cool.  He’s a rather fun offering, and an improvement on the Siege release…even if he’s got the wrong name.

#3262: Parks & Recreation ReAction Figures

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

LESLIE KNOPE, BEN WYATT, DONNA MEAGLE, APRIL LUDGATE, & BURT MACKLIN

PARKS & RECREATION REACTION FIGURES (SUPER 7)

“Ba ba badadada ba badadada ba badadada ba badabada….”

Parks & Recreation Theme Song (Paraphrased)

The Office gets, like, a lot of attention.  So much attention.  Absurd amounts of attention.  And, the thing is, honestly?  It’s kind of overplayed.  Don’t get me wrong, there are some very funny bits on The Office.  But, for the most part, they can just be boiled down to quippy clips that make just as much sense, if not more, when chopped up and thrown into compilations as when shown in actual context.  For my money, the superior workplace comedy by a wide berth is Parks & Recreation, a show that’s also just one of my favorite shows in general.  As a show with a lot of pretty normal looking people, there’s not a *ton* in the way of merchandising for Parks & Rec, but there’s more than you might think.  Funko of course grabbed the license for Pops a while back, and last year Super 7 also got the license for the purposes of doing a set of ReAction Figures, most of which I’m taking a look at today!

THE FIGURES THEMSELVES

Leslie Knope, Ben Wyatt, Donna Meagle, April Ludgate, and Burt Macklin are five of the six figures (the other being Ron Swanson) that make up the first series of Super 7’s Parks & Recreation ReAction Figures line, which started hitting retail in the fall of last year.

You can’t very well have a line of Parks & Rec figures and not include the main character, so Leslie was always along for the ride.  Leslie gets quite a number of looks over the course of the show, but this figure settles on one of her office attire blazer and skirt looks, which feels pretty appropriate for the character.  The figure stands 3 3/4 inches tall and she has 5 points of articulation.  The movement on her neck is a little restricted by the hair, but otherwise it’s a decent basic set-up for movement.  Leslie’s sculpt is obviously stylized to be a bit more basic.  It’s gets the important details, while dialing back a bit on some of the specifics.  The head’s got a passable likeness of Amy Pohler; it’s not spot-on, but at this scale and in this style, it’s hardly expected to be.  I’d say she’s probably the best of the likenesses present in the initial line-up.  The paint work is, like the sculpt, pretty basic.  It does what it needs to, and it looks the part.  Leslie is packed with a plate with a waffle on it, undoubtedly one made by JJ’s Diner.  There’s honestly nothing more on-brand for Leslie, so it’s definitely nifty.  She can’t really hold it, though, which is a shame.  Still cool.

Though absent until the end of the show’s second season, Ben’s still very much a signature character for the show.  Gonna be honest, there are few fictional characters I identify with more than Ben Wyatt.  His absence from the first two rounds of Pops kind of soured me on those, so I’m very excited that he’s here.  Ben’s sporting his more dressed-down, getting things solved look, which definitely works well.  The figure’s sculpt is one that works better in context than on its own.  The head’s an okay Adam Scott, but it could honestly just as easily be Jason Bateman or Jason Sudekis.  I don’t hate the smile, but it’s also not quite a quintessential Ben expression.  The body doesn’t seem quite skinny enough for Scott’s build; he’s too doughy in the middle, I think.  It’s definitely a little bit of a stylistic thing, though.  The paint work on Ben is pretty basic, and fairly drab, but that’s all about right.  Ben’s packed with a small recreation of the Cones of Dunshire, Ben’s absurdly complicated strategy game he invented.  As with Leslie’s waffle, this is a very on-brand piece, so it’s a lot of fun.  He does have a little bit more luck actually holding it, so that’s a plus.

Donna may have been in the show from the beginning, but she’s a character who very much grew as the show progressed, going from a glorified extra in the first season to a prominent series regular by the end.  Donna also has a lot of looks over the course of the show, but this one goes for her more casual attire.  Donna’s sculpt is a little more immediately obvious as to who it’s supposed to be, but it’s still not quite as on the mark as Leslie.  The likeness to Rhetta’s not overly there, but at the same time, it’s not like the figure looks *unlike* her.  As with Ben, the context of the rest of the figures fills it in pretty quickly.  Her sculpt is pretty basic, as expected, but her proportions seem a little more on the mark than Ben’s were.  Her paint work adds a little more color to the set, with a nice splash of bright pink, which works well for the set.  Donna is packed with a box of baked goods, marked “Treat Yo Self”, which is another very appropriate extra, since the Treat Yo Self antics really helped to cement her character.  We’re back to the figure not being able to hold the accessory, unfortunately, but it’s still nifty to have it.

April’s one of the few characters that comes out of the gate more or less fully formed on the show, albeit in a way that still very much allows her to grow as the series progresses.  For her figure, she’s another casual attire look, which is again pretty on-the-mark for her character.  April’s sculpt winds up being the weakest of the bunch, I find.  Something about the head just misses the mark.  The hair seems to sit too far back, making her forehead seem far too large, and the proportions on the body seem a bit off.  None of it’s terrible, but it’s not super great either.  Her paint work is at least pretty bright, so she’s got that going for her.  April is packed with a small minifigure of her and Andy’s three-legged dog Champion, which isn’t quite as spot-on for the character as some of the others, but is still a pretty solid inclusion.

Burt Macklin, FBI!  Yes, while everyone else in the assortment is just their normal selves, our first version of Chris Pratt’s Andy Dwyer is him using his Burt Macklin persona, which he’d whip out whenever things got “serious.”  It makes him the most targeted of these figures in terms of appearance, and also marks him as someone they’re probably looking to do multiple variants on, should the line progress.  “Burt” is a pretty decent sculpt as well.  The likeness is a little harder to place, since he’s got the glasses sculpted in place, but it seems to land the look pretty alright, and the body gets Pratt’s slightly huskier build down well.  “Burt” has a slightly sloppier paint scheme than the others in the set, especially on the hair and beard.  Given the scale and style, though, it’s not that bad, and the rest of the figure’s all pretty clean.  There are no accessories for this guy, which is a bit of a bummer, but I suppose they’re holding out on the more fun stuff for another Andy variant.  Still feels a bit light.

THE ME HALF OF THE EQUATION

With Parks & Rec being very high on my list of favorite TV shows, it’s hard for me to justify passing up the chance to own the cast in action figure form.  Of course, given the price point on these things, I was initially thinking I might just grab Ben.  I wound up being swayed into getting the five of these when my wife Rachel and I found them at Target, and she insisted on buying them for me as an early Christmas gift.  They’re definitely expensive for what they are, and they’re not perfect, but I’d be lying if I said I wouldn’t be down to pick up whatever else they want to do from the line.

#3261: Captain Carter

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CAPTAIN CARTER

MARVEL STUDIOS WHAT IF…? (HOT TOYS)

Greetings and welcome to a brand-new year, faithful readers!  Today’s important thing is the official kick off the post-Christmas reviews.  Very fancy stuff.  Notably, I’m also breaking formula, and totally writing a review of a Hot Toy, but not on a big review number.  Look, I’ve got a new Hot Toy, and I don’t really feel like waiting over 200 reviews to get to it, okay?  When last I was discussing Hot Toys, I had two different Captain America reviews, and indicated that was kind of the path I’d be sticking to for Hot Toys going forward.  Today’s focus sticks with that, more or less, albeit in a sort of an alternate universe capacity.  Yes, straight from 2021’s What If…?, I’m taking a look at a very fancy version of Captain Carter, Margaret “Peggy” Carter’s super soldier alter-ego!

THE FIGURE ITSELF

Captain Carter is the second figure in the What If…? component of Hot Toys’ Television Masterpiece Series, which is their “small screen” equivalent to their longer running Movie Masterpiece Series.  She’s figure TMS059, placing her right between Zombie Hunter Spidey and the Hydra Stomper.  It’s a nice little stretch of What If…? figures there.  Peggy stuck pretty much spot-on to her original release date of fourth quarter 2022, hitting back in early November.  Captain Carter is based on her WW2-era outfit from her debut episode, which is definitely the more distinctive of her two looks (it also pairs well with the upcoming Hydra Stomper).  The figure stands about 11 3/4 inches tall and she has over 30 points of articulation.

Captain Carter’s head sculpt marks a change for the usual Hot Toys stylings.  They most often got for hyper realism, even when adapting non-realistic designs (as highlighted by the Clone Wars characters in their larger Star Wars line), but the What If…? figures are instead sticking closer to their actual animation models.  This appears to possibly be a licensing thing, since the Legends figures were the same way.  Whatever the case, the spot where this is most evident is the head sculpt.  The sculpt is much smoother and streamlined than your typical Hot Toys head, but it’s nevertheless a really strong likeness of the character as she appears in the show.  It’s still got a respectable likeness of Hayley Atwell, making her fairly easily recognizable.  She includes two different pieces for the back of her hair, allowing for either a relaxed hang, or something a bit more dynamic.  They’re both attached via magnets, so they swap out and hold in place pretty nicely.  They also both work really well for their respective looks, and add a nice bit of variety to what you can do with the figure. As with the sculpting, Captain Carter’s paint work is a bit different from the usual, with something a little cleaner and bolder.  The application’s still really strong, and she’s got enough realism to her that she doesn’t stand out too much from other figures Hot Toys has done.

The bulk of Captain Carter’s costume is a single piece jumpsuit, in contrast to the usual two-piece set-up we’ve seen on the Captain Americas.  That said, she’s still got that layered look like the Caps have, so as to properly recreate all the cool little details of the costume.  On mine, the mid-torso stripes do seem *just* a tad off-center, just careful posing makes them look just fine.  The suit is topped off with a shoulder harness, a belt, and boots, which are all plastic add-on parts.  Like the more recent Captain Americas, the boots use a two-piece construction, so that the ankles can still properly move.  The belt and harness just being plastic is a slight step-down from the cloth construction on the other Caps, but it also tracks a bit better with her more animated appearance.

Peggy’s underlying base body is a rather basic one, which seems to go more for function over form.  It’s a fairly standard female base body, albeit one that’s a little taller than the usual.  It’s generally a pretty good match for Peggy as seen in the episode, although, if I’m honest, I do feel like she’s still perhaps a bit too short for her appearance in the show.  Likewise, her shoulders seem a little narrower.  Beyond that, though, it does work okay.  The posability is pretty decent, especially in the arms.  The hips are a bit restricted, but that’s more about the costume design than the actual body.

Captain Carter gets a pretty decent selection of extras, covering all of the basics for what she’s got in her episode.  Included are:

  • 7 hands
  • Shield
  • Hanger for shield
  • Sword
  • Handgun
  • Display stand

The hands included are two fists, two gripping, two relaxed, and a right hand with trigger finger.  The shield is smaller than Steve’s (which is either accurate or not, since it’s scale fluctuated depending on the shot), but it’s still similar to his in construction and detailing.  The straps can unhook just like Steve’s, and there’s a hook for hanging it on her back.  The sword is based on the one she grabs during the first episode’s climactic battle, and it’s nice and sharply detailed.  The handgun is a little simpler than other HT weapons, which I’ll admit I was just a tad bummed by, but it’s not going to get much use by me anyway.  Her display stand goes with the hexagonal shape, with a printed design based on the What If…? branding, as well as her name on the front.

THE ME HALF OF THE EQUATION

The Captain Carter episode of What If…? is far and away my favorite of the show’s first season.  I’ve been very excited for all of the tie-in stuff for it.  While I’m keeping it lighter on the HT side still, I’ve got that soft spot for the Captain America-related stuff, and I’ve honestly been wanting an HT Peggy of some form since The First Avenger.  Now, you’ll notice that I said this figure was kicking off the post-Christmas stuff.  I got this one courtesy of All Time’s owner Jason, who gave her to me as a very generous Christmas gift.  She’s pretty awesome, and I’ve very excited to pair her off with the Hydra Stomper figure!

#3260: Superman

Posted by Ethan Wilson in Reviews and tagged with , , ,

SUPERMAN

FIRST APPEARANCE (DC DIRECT)

Though there are previous instances of costumed heroes and vigilantes with catchy names and gimmicks, the tried and true concept of the “Super Hero” was properly introduced in 1938’s Action Comics #1, which introduced Superman to the world.  Superman was a smash success, launching an entire industry of super hero comics, and becoming a major fixture in that very industry.  In more recent years, he’s become something of a divining rod for what kind of a person you are, given your feelings on whether he’s out of place in today’s world or not.  But, today, I’m looking back to his beginnings, with a figure based on his very first appearance.

THE FIGURE ITSELF

Superman was released in Series 2 of DC Direct’s First Appearance toyline.  While there had been prior Superman figures from DCD at this point, this was the first to actually be sporting his first appearance attire, and the first specifically based on the golden age, or Earth 2, Superman.  The figure stands about 6 1/2 inches tall and he has 11 points of articulation.  All of the Series 2 figures got the benefit of ever so slightly improved articulation, notably including wrist joints on all of the figures, which was beyond the standard for DCD at the time.  The figure’s sculpt was all-new at the time, though DCD wound up re-using most of it a few times after the fact.  It’s a fun sculpt, which captures the spirit of the original art, while providing just a little more polish to the whole thing.  The proportions definitely match, as do the slightly more unique aspects of the costume design as well.  He’s meant to be based more on the interiors than the cover, showcased best by the specific boots he’s got.  They’ve added a little extra detailing to the sculpt, especially for the face and the boots.  The mixed media set-up that DCD was pushing early in this line is present on this figure in the form of his cape, which is a double thick item here, which has a wire in its lining, allowing for a little bit of dynamic posing.  All later releases using this mold had an actual sculpted cape, but this one certainly has its charm.  The figure’s paint work is fairly basic, but it checks all the right boxes.  The application is crisp and clean, and he’s quite bright and eye-catching.  The figure is packed with a display stand and a reprint of Action Comics #1, which was standard for the line.

THE ME HALF OF THE EQUATION

I’ve discussed before that for a while in the early ’00s, my dad and I “shared” a DC Direct collection.  It meant there was very little overlap between our two respective sets of figures.  First Appearance Series 2 was one that we split evenly, and Superman was one of the two that my dad took.  I did quite like the look of the figure, but I also had a number of Superman figures already.  Last year, I was helping a family friend downsize their collection, and this Superman was amongst the departing items.  I had just pulled out my older figures from the set for review purposes at the time and was feeling nostalgic, and I couldn’t bring myself to pass on this one.  He’s a fun figure, and a great addition to the rest of the line.

#3259: Antoc Merrick

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ANTOC MERRICK

STAR WARS: THE BLACK SERIES (HASBRO)

“Antoc Merrick commands Yavin 4’s starfighters before the Battle of the Death Star, flying as Blue Leader”

Originally, during A New Hope‘s climactic trench run on the Death Star, the color-coded squadron of pilots joined by Luke was not supposed to be red, as seen in the final film, but blue.  However, when the production realized that the blue-screen effects they were using for the space sequences would result in all of the blue markings on the ships being replaced by the background, the squadron was switched to red, with the intended back-up squadron going from red to gold, and Blue Squadron winding up shelved.  With the advancement of special effects over the years, Blue Squadron has shown back up in other forms, including in Rogue One, where Blue Squadron is more or less wiped out during the final battle on Scarif, thus explaining their absence from A New Hope.  The squadron is lead in the film by Antoc Merrick, who’s a cool dude who got far too little action figure coverage when the original Rogue One product hit.  Have no fear, the second round of product is here!

THE FIGURE ITSELF

Antoc Merrick is one of two Target-exclusive Star Wars The Black Series figures released for the Rogue One sub-set from earlier this year.  He is figure 8 in the overall Rogue One line-up, making him the second numerically of the two exclusives.  The figure stands a little bit under 6 inches tall and he has 29 points of articulation.  For the most part, this figure is re-using parts from the original Pilot Luke body (which I reviewed when it was used for Wedge), but he actually swaps out the arms for the ones from the Snowspeeder Pilot Luke, so as to give Antoc his proper gloves.  The Luke body’s technically a touch short for Merrick, whose actor Ben Daniels is closer to 6 feet tall, but given that he’s a much more minor player, I suppose expecting a totally new pilot body just for him is probably a bit much.  It’s at least a decent sculpt, and the alternate arms mix things up a little bit from Luke and Wedge.  He doesn’t get the proper collar piece from the movie, but it’s otherwise fairly accurate, and the collar’s honestly quite minor.  Antoc gets an all-new head sculpt, which sports a respectable enough likeness of Daniels in the role, although it does seem a little too large for the body.  Antoc’s color work is a nice change of pace for the pilots, since it’s predominantly blue.  The paint work is generally pretty basic, but it’s got some solid application, and the face printing works well.  Antoc is packed with his helmet and a blaster pistol, which have become the standard pilot offerings.  The pistol looks to be the same one included with Luke, while the helmet is, curiously enough, the Snowspeeder version of the mold, which is a bit smaller than the X-Wing version.  It makes getting the piece onto Antoc’s head rather tricky, since the sizing doesn’t work quite right.  It’s at least a very nicely painted piece, and it makes for a decent thing for him to hold.  Given he’s not likely to get an X-Wing to pilot at this scale, having him hold the helmet seems more appropriate anyway, but it’s still odd.

THE ME HALF OF THE EQUATION

I’ve honestly been hoping for an Antoc Merrick in some form or another since Rogue One hit theatres.  He’s a minor character, but a cool enough one that he caught my attention.  I was always a little bummed that the basic line never got to him.  I wasn’t super thrilled by him being an exclusive, as I’m not really going out of my way to track any of them down these days, but I happened to find him in store right as Target was doing that crazy markdown on all of their figures, so I got him at $12, which is a price that I really couldn’t say no to.  He’s not a game changer or anything, but he’s nifty, and I do like actually having him.  Hey, another pilot for the shelf!

#3258: Silk

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SILK

MARVEL LEGENDS (HASBRO)

“Bitten by the same radioactive spider that gave Peter Parker his powers, Cindy Moon develops spider powers of her own and soon takes on the role of Silk!”

Marvel’s Original Sin cross-over from 2014 was one with a few lasting changes, none of them particularly huge status quo shifts, or anything, but notable none the less.  It officially added Neil Gaiman’s Angela to the Marvel universe by revealing her to be Thor and Loki’s long-lost sister, came up with a convincing way to write out the original Nick Fury so that his son, Nick Jr, who happens to more closely resemble the Samuel L Jackson version of the character, could replace him, and, most relevantly for today’s review, revealed that the spider that bit Peter Parker had also bitten his classmate Cindy Moon, giving Cindy her own set of abilities.  Cindy was worked back into the mainstream universe during the battle with Morlun and his family the Inheritors, having been hidden away for years to keep her protected.  She was given the codename Silk, and spun (heh) off on her own, though she does find her way back to the main Spidey book from time to time for cross overs.  Silk’s actually been pretty fortunate in terms of raw numbers when it comes to toy coverage, though perhaps a little bit less so when it comes to actual distribution.  It’s okay, though, because I finally got one.  So, let’s look at Silk!

THE FIGURE ITSELF

Silk is an part of an Amazon-exclusive Marvel Legends two-pack, which was released under the “60 Amazing Years” banner that’s celebrating Spider-Man’s anniversary. The other half of the set was a Doc Ock, which is just a slight adjustment on his figure from back in 2018. This Silk marks her third time in Legends form, following two solo releases.  This one is based on Cindy’s most recent look, which sports shorter hair, and a slightly more vibrant color palette.  It’s honestly my favorite of her looks thus far, so that works for me.  The figure stands about 6 1/4 inches tall and it has 29 points of articulation.  Silk’s largely built using the same patchwork body as Spinneret, which, apart from the ever evolving ports on the back of the torso, is honestly a pretty solid base body, and certainly a good match foe Silk’s usual depictions in the comics.  It’s also a good deal more posable than her last two figures, which feels more appropriate for a web-slinger.  Silk gets a brand-new head sculpt, and it’s honestly the nicest sculpt she’s gotten to date.  It’s certainly the first one to really capture her Korean heritage, which is definitely a plus, and I really like the more naturalistic approach to the detailing, as well as the ever so slight windswept look to her hair.  It’s enough to look somewhat dynamic, without looking too crazy.  Silk’s color work is based on the bolder palette of her newer design, so she’s definitely got some visual pop.  The application is generally pretty cleanly handled; there’s a little bit of slop on the edges of the white sections, but it’s pretty minor.  The head does quite well, with the printing for the eyes looking quite lifelike, and the subtle blue accenting on the hair really bringing out the sculpted details.  The figure is packed with an alternate unmasked head for Cindy, with a corresponding pulled down mask piece, as well as three pairs of hands (fists, gripping, and open gesture) and an extra right hand with a web effect.  It’s quite a nice selection of extras, and covers pretty much all of the bases.

THE ME HALF OF THE EQUATION

Silk’s introduction was, admittedly, a little clumsy (something even her creator Dan Slott has admitted in recent years), but she got better pretty quickly, and she’s been a pivotal character to a couple of Spider-cross-overs since.  I missed out on her first figure because that wave showed up effectively nowhere, and her second because I just underestimated how quickly it would sell.  I was poised to miss this one, too, since I didn’t really need another Doc Ock, but I was fortunate to get just Silk on her own when one got traded into All Time.  She’s actually quite a lot of fun, and getting this version makes me kind of glad I missed the other two.

#3257: Axe Woves

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

AXE WOVES

STAR WARS: THE BLACK SERIES (HASBRO)

“A skilled warrior, Axe Woves is loyal to Bo-Katan and is a member of a band of Clan Kryze Mandalorians striking back at the Imperial remnant”

When Bo-Katan Kryze made her first appearance in live action during The Mandalorian‘s second season, she was accompanied by two other Mandalorians: Koska Reeves and another guy.  Today, we delve into the other guy.  Okay, the other guy actually does have a name: it’s Axe Woves.  That’s a name that’s really just peak Star Wars naming, honestly.  And it really should be, since Axe was actually named by none other than George Lucas himself, who named Bo-Katan’s then un-named Lieutenant during a set visit whilst Season 2 was in production.  Unlike Koska, who re-appeared alongside Bo-Katan for Season’s finale, Axe has thus far only appeared in the one episode, but is rumored for a Season 3 return.  Perfect time for some action figure coverage.  Let’s take a look at that, shall we?

THE FIGURE ITSELF

Axe Woves is part of the first main assortment of Star Wars: The Black Series‘s 2023 line-up.  Clearly, he’s a little early.  It’s okay, so’s pretty much everything else.  He’s part of the Mandalorian sub-set of the line, of course, and he’s figure 25 in that numbering scheme.  The figure stands roughly 6 inches tall and he has 28 points of articulation.  In terms of construction, Axe is largely built on the bank of parts first seen on the Death Watch Mandalorian from earlier this year.  He keeps the same articulation scheme from that release, which is to say that he poses pretty well, and certainly on-par with a modern Black Series figure.  Axe gets two new pieces thrown into the mix, a new un-helmeted head and a new belt/lower abdomen add-on.  It’s otherwise just the Death Watch Mando, which is fair, since there are a number of shared armor pieces between the two.  The new head sculpt bears a passable resemblance to actor Simon Kassianides (who, it should be noted, has an oddly close resemblance to the Saga-era Jango Fett head sculpts), though it’s not as spot-on as other sculpts in the line.  Axe’s paint work pretty decent for the most part; it’s on par with other recent offerings, and there’s some rather nice weathering to the armor.  The only slight misstep is the face paint, which, at least on my copy, has the eyes set ever so slightly higher than they should be.  It’s not crazy, but it’s definitely off.  Thankfully, amongst his accessories is his distinctive Mando helmet, which is a re-use of newer Boba Fett mold.  It doesn’t sit quite as well on this figure’s head, but it overall works.  He’s also packed with his jet pack and a small blaster pistol, both of which are re-used molds.

THE ME HALF OF THE EQUATION

Once we had both Bo-Katan and Koska, it was just a waiting game for Axe, since it’s not like they’re gonna leave one Mando undone, right?  Axe is exactly the sort of background character that would fascinate me in older Star Wars entries, and that came through on the newer stuff too.  I dig his look, I dig his name, and I dig the background behind it all.  He’s not a perfect figure, but he’s a pretty fun one, and a good by-the-numbers offering.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3256: Sakaar Loki & Heimdall

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

SAKAAR LOKI & HEIMDALL

MARVEL MINIMATES

“In Marvel Studios’ Thor: Ragnarok, Thor is imprisoned on the other side of the universe without his mighty hammer and finds himself in a race against time to get back to Asgard to stop Ragnarok – the destruction of his homeworld and the end of Asgardian civilization – at the hands of an all-powerful new threat, the ruthless Hela. But first he must survive a deadly gladiatorial contest that pits him against his former ally and fellow Avenger – the Incredible Hulk!”

For movies prior to Thor: Ragnarok, Diamond Select’s Minimates line-ups typically relied on a mix of a couple of different retailers carrying two-pack assortments, but beginning with Ragnarok, the specialty assortment was replaced by a boxed set, augmented by exclusive two-packs at both TRU and Walgreens.  For Ragnarok, Walgreens took two exclusive packs, while TRU took one, which is the one I’ll be looking at today.  Let’s have a look at Sakaar Loki and Heimdall!

THE FIGURES THEMSELVES

Sakaar Loki and Heimdall are, as noted in the intro, the one proper TRU-exclusive set for the Marvel Minimates tie-ins for Ragnarok.  Interestingly enough, this was the second time the two characters had been packed together in the line, as they were also paired for the Dark World tie-in assortment as well.

SAKAAR LOKI

Surprisingly enough, Loki was actually the character with the most ‘mates for Ragnarok, edging out even his brother Thor, and netting one variant for each of the three release venues for the movie’s tie-ins.  This one is based on what he wears for the bulk of the movie, while running around on Sakaar.  It’s not quite as true to the character as his final battle attire, but it’s still pretty decent.  The figure is built on the standard post-C3 minimate body, so he stands about 2 1/4 inches tall and he has 14 points of articulation.  Loki’s got three sculpted add-on pieces, for his hair, belt, and cape.  The belt and cape were shared with the boxed set Loki, while the hair was a new piece shared with the civilian Loki released on the Walgreens side of this assortment.  I find the hair to be a little bit bulky for Loki in Ragnarok, but it’s generally not bad, and the cape is still one of my favorites.  Loki’s paint work is a little cleaner than his boxed set equivalent, with no major issues with slop or bleed over.  He’s also a little more colorful, which is true to the Sakaar design.  I’m not as big on the facial expression for this one, which is rather bland, and feels like it has too many lines for Hiddleston.  Loki’s only accessory is a clear display stand, which is rather on the light side.

HEIMDALL

Heimdall’s only prior coverage in the line was his Dark World release, which actually wasn’t bad, and is also his fully armored attire, which was distinctly different from his on the run look from Ragnarok.  Heimdall gets two sculpted add-ons, for his hair and for his cloak/coat.  The hair is an alright piece, though it certainly feels rather too kempt for Heimdall’s look in Ragnarok.  Where Loki’s piece seemed too bulky and long, this one feels too tame and short.  The chest piece is also…it’s just not great.  Making the whole thing one piece means that the right arm is effectively trapped in place, and the legs and waist are also pretty restricted, and on top of that, the neck can’t really do much either, so he’s just generally not really posable.  And, to add insult to injury, the piece is just flat out not accurate to the character’s look, like at all.  It’s got him wearing some sort of heavy coat and multiple layers, when in the movie he’s got a sleeveless shirt and a simple pair of pants on under the cloak.  I’m not sure if this was based on early concept art or what, but it’s just not really right, and the figure would have really been better off if this piece had just been the cloak, rather than the whole thing.  The paint work doubles down on the inaccuracy of the sculpted pieces, resulting in a kind of dull look for the figure.  Heimdall is packed with his sword, as well as a clear display stand.

THE ME HALF OF THE EQUATION

There was a whole slew of 2017 releases for Minimates that I had to skip on when they dropped, and almost the entirety of the Ragnarok line-up was on that list, this set included.  This one was snagged from TRU during the beginnings of their clearing out of their products in 2018.  Loki’s okay, but not as definitive as the boxed set version.  Heimdall is rough, I’m not gonna lie.  He’s not accurate, and he’s not a particularly fun figure either.  This set’s generally kind of weak.

#3255: Protocol Droid – Holiday Edition

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

PROTOCOL DROID — HOLIDAY EDITION

STAR WARS: THE BLACK SERIES (HASBRO)

“Protocol droids like C-3PO are vital in smoothing differences encountered by the many farflung cultures interacting on a regular basis throughout the galaxy. Most are humanoid, like the company they keep.”

‘Twas two nights before Christmas and all through the house, Ethan was reviewing something festive two days before the actual holiday because both Christmas Eve and Day fall on the weekend this year, and he’s not doing reviews those days anymore.  Okay, maybe that version’s not quite as catchy as Clement Clarke Moore’s.  But I still think it’s got potential.  Look, the point of it all is that I’m gonna do this whole holiday cheer thing.  I’m cheerful, dang it.  So, please look at this overly commercialized cash grab product review as proof.  For the cheer.  And the jolly.  Perhaps even some whimsy.  Since 1978’s “The Star Wars Holiday Special,” the Star Wars franchise has been cashing in on the holiday cheer, though on the toy side of things it’s a more recent development.  Hasbro had a solid run of one-off holiday offerings in the early ’00s, but took a bit of a breather, before returning to it in 2020 with a whole mess of themed figures under their Black Series branding.  They were each exclusive to a different retailer, and were generally a bit of a pain to track down, so I avoided most of them.  This year’s follow-ups, however, included a Fan Channel offering, and so I’m taking a look at a delightfully festive Protocol Droid today!

THE FIGURE ITSELF

The Holiday Edition Protocol Droid is one of the five 2022 Holiday Edition offerings for Black Series.  He’s a Fan Channel exclusive, and started shipping out in early November of this year.  He’s apparently got no official name, which, if I’m honest, feels like a missed opportunity.  Why no fun little in-joke with the naming?  For shame.  Oh well.  The figure stands 5 1/2 inches tall and has 21 points of articulation.  In contrast to the most recent Protocol Droids we’ve gotten from The Black Series, the Holiday Protocol is built on the first iteration of the C-3PO mold.  It’s generally not a bad mold, but this older version means that this release lacks the added elbow articulation that all figures post 4-LOM have gotten.  It’s a little bit of a bummer.  Not the end of the world, but a bummer to be sure after getting the improved arms on so many figures.  In order to mix things up and go just a tad more festive with the mold, the Holiday Protocol gets a scarf piece, courtesy of Lando. Beyond that, the change-ups are all paint.  This guy’s been done up in a variety of red, white, and green, which all feels appropriately festive.  On one hand, I’m a little sad we didn’t get any of the ugly sweater patterning that the troopers have been getting, but on the other, I can appreciate this one going with a different angle.  I do really like the striped “socks,” and this printing on the scarf is certainly a lot of fun.  Each of the Holiday Edition figures is packed with a smaller companion, and in the case of the Protocol Droid, it’s a re-decoed BD-1, who’s been done up to match the Protocol Droid.  He’s the same mold as the Fallen Order releases, which is honestly a pretty great mold, and he’s probably my favorite thing about this set.

THE ME HALF OF THE EQUATION

I’ve passed on the other Holiday figures up to now, since, as I touched on in the intro, I didn’t really feel like hunting them down.  This year was pretty much the same deal, but since this one was going through Fan Channels, I had the opportunity to get one through work.  I don’t know that he’s really my preferred of this year’s offerings, but he was easy to get, and that’s really what matters, right?  The main droid’s okay.  He’s kitschy and goofy, but that’s what I expected.  BD-1 kind of steals the show here, but that’s just kind of the history of that mold, now isn’t it?  And that’s all I got until after the holiday.  Have a good one everybody!

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.