Tag Archives: All Time Toys

#2772: Lady Jaye

Posted by Ethan Wilson in Reviews and tagged with , , , ,

LADY JAYE

G.I. JOE: CLASSIFIED SERIES (HASBRO)

G.I. Joe: Classified Series has certainly had a kind of a rough start.  The line’s certainly far from a failure, and was honestly one of Hasbro’s hottest lines last year.  The trouble is that it’s so darn hard to actually collect it, since more than half of the releases last year were actually hard to find exclusives (and even the non-exclusive hasn’t been overly plentiful, either).  Fortunately, 2021 looks to at least be trying to keep a little more of it in the main line, so hopefully that might help with some of the distribution issues.  I managed to get my hands on some of the most recent figures, so I’m going to be jumping into things with a look at one of my favorite Joes, Lady Jaye!

THE FIGURE ITSELF

Lady Jaye is figure 25 in the G.I. Joe: Classified Series line.  She’s a main line release, not exclusive to any specific retailers, and is, along with Flint, one of two new figures in the latest assortment of the line.  The figure stands about 6 inches tall and she has 36 points of articulation.  Jaye’s articulation scheme marks a notable change from and improvement upon the articulation set-up for prior female figures in the line.  Where both Scarlet and Baroness had more restricted movement than their male counterparts, Lady Jaye actually pretty much just matches the male articulation, right down to keeping the double joints on the elbows, which have previously proved problematic implementing on female figures, due to the smaller arms.  Fortunately, they’ve taken advantage of their new pinless construction joints in order to help the arms look not only more seamless, but also be more stable in terms of construction.  It really works well, and makes her even more fun to play around with.  Lady Jaye’s design is actually a fairly faithful recreation of her classic V1 look from ’85.  Admittedly, her original, rather utilitarian design is one of those ones that lends itself best to modernization, so it still looks fine in the updated setting of the new Joes.  All of the elements of the original design remain present, with some extra details added in to help to fill out the larger canvas just a bit more.  So, she’s bee granted a few extra panels of detailing on her fatigues, as well as a few more armored elements on her legs, to match the rest of the line a little more.  As a send-up to the V1 figure, Jaye has her hat, of course, but that’s the one element she notably lacked in the cartoon.  In order to give collectors both options, Jaye has a removable hat, but not quite the way you’d expect; it’s actually a whole wig that comes off of the figure’s head, which makes it look a lot better proportioned to the head.  I was a touch concerned about it falling off easily, but it actually stays in place securely, and adds a lot of extra display versatility to the figure.  The rest of the sculpt is a pretty impressive summation of the character as seen in various media over the years, and that facial expression in particular feels pretty spot on.  Jaye’s paint work is, as expected for the character, pretty reserved, but a good match for her usual look.  She’s got the printed face work again, which looks quite nice, and they’ve placed a couple of insignias, in order to help spice things up a bit, I guess.  It’s all quite nice work.  Lady Jaye’s accessory selection is pretty decent.  In addition to the previously mentioned alternate hair pieces, she’s got her usual javelin set-up, which in this case is a multiple piece construction, which can be disassembled and reconfigured.  It’s made up of two actual javelins, with three different heads to swap around between them, as well as the actual hand held mechanism of it all, which can hold one javelin, while the other, as well as the two tips not in use, can be stowed on her back pack.  Said back pack also has an articulated arm featuring a camera at the top, calling back to the original figure’s separate spy camera piece.

THE ME HALF OF THE EQUATION

Given her prominence in the old cartoons, Lady Jaye has long been one of my favorites when it comes to Joes, so I was definitely happy to hear her name get leaked early on for this line-up, and I was even happier when she was shown off, because she sure did look pretty cool.  I was very fortunate to be able to snag her from one of All Time’s early cases of the wave, and I have to say, in hand, she may very well be the line’s most impressive figure.  What she does, she does very well.  Hasbro’s really set a new standard with this one.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2771: Ryu & Akuma

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

RYU & AKUMA

STREET FIGHTER II MINIMATES

2005 into 2006 marked a rather turbulent time for the Minimates brand.  DST and Art Asylum were definitely trying to expand it, but there was some trouble with that.  Attempts to add DC and Lord of the Rings kind of fell through, so a desire for other licenses to replace them was building.  Marvel, still the flagship line, went on hiatus for over a year, while they tried to regroup on other licenses.  In early 2006, they attempted to get into the video game character market with Minimates based on the classic fighting game Street Fighter II, hoping that might be the thing that took off and saved the line.  Spoilers: it wasn’t.  In the line’s one and only assortment, we got some of the game’s heavy hitters, which included today’s figures, Ryu and Akuma!

THE FIGURES THEMSELVES

Ryu and Akuma were released in the standard retail assortment of Street Fighter II Minimates.  The two of them were based on their standard Player 1 colors, but there was also an AFX-exclusive variant pack that put them in their P2 colors, as well as changing up their expressions.  The standard versions also surfaced overseas as part of a blind-box assortment, which also featured the P2 colors, but this time without the changed expressions.

RYU

Ryu, one of two character’s carried over from the first game, is arguably the star of the Street Fighter series, so he’s certainly a sensible choice for the line-up.  He’s seen here in his standard white gi with red accents set-up.  The figure was built on the standard base body, so he’s about 2 1/4 inches tall and he has 14 points of articulation.  He has four add-on pieces, for his hair, the bottom of his robe, and his hand bracers.  It’s honestly a pretty nice selection of parts, and matches up pretty well with his in-game sprite, while still helping him remain consistent with the overall ‘mate aesthetic.  There’s still some flow and expression to the parts, but they aren’t overly detailed like some later parts would be.  His details are handled largely through paint work, of course, and it’s pretty nicely done.  The face has just enough detail to really capture the character, and his body is well defined.  I appreciate that they’ve gone to the trouble of actually outline the edges of his sleeves and pants, so that they’re a little more defined.  Interestingly, like Spider-Woman from last week, Ryu is totally painted.  It looks nice, so I can’t really complain.  Ryu is packed with a blue effects piece, presumably meant to replicate his Haduken attack, which makes for some fun posing options.

AKUMA

Facing off against Ryu is the game’s hidden final boss, Akuma, a pretty solid opponent for Ryu.  He’s built rather similarly to Ryu, which is honestly appropriate.   The only part that’s actually shared between the two is the arm bracer piece, which works well for both of them.  His hair is obviously a new piece, as is the skirt piece, which they could have probably gotten away with re-using, but they didn’t, so good for them.  He also gets a new piece for the necklace as well, which is something that could have been painted on, but wasn’t, and is honestly the better for it.  The hair’s a little bit devoid of detail, which makes it look a little wonky, but for the most part it looks okay.  The detail work on this guy is a good match for Ryu, and he is likewise totally painted.  I appreciate that they actually changed up the tampo for the torso detailing, as that’s another area where they didn’t *have* to change it.  Akuma is packed with the same effects piece as Ryu, but in purple instead of blue.

THE ME HALF OF THE EQUATION

The SFII Minimates line was one I really wanted to support, but it was one that I unfortunately didn’t really see in person.  The only ones I ever found were the P2 colors for these two, which got clearance out at KB toys of all places.  Interestingly, my Ryu from that set was erroneously the single pack version, so I never had the changed up expression for him.  I eventually got the chance to get the proper P1 versions when All Time got in that big Minimates collection back in 2019, which I was pretty happy about.  These two are well made to be sure, and it’s a shame the line didn’t take off the way DST hoped they would.

#2769: R5-D4

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

R5-D4

STAR WARS: THE BLACK SERIES (HASBRO)

“A red astromech droid, R5-D4 thought he’d found a home when the Jawas sold him to Owen Lars, along with the protocol droid C-3PO. But R5’s motivator blew as he rolled away from the sandcrawler, forcing the Jawas to take him back in exchange for R2-D2.”

The Mandalorian has had a number of returning characters from elsewhere in the Star Wars mythos, some big returns, and some rather small.  On the small side was a character that’s easy to miss in both of his on-screen appearances.  A little less so in A New Hope, where R5-D4 is notably the astromech whose head blows up, prompting Owen and Luke to buy R2 instead, but it’s not like he gets name dropped there, or anything.  His reappearance in The Mandalorian almost feels like it could just be a similarly designed droid, until we see the back of him, revealing a small scorch mark where his motivator would have blown all those years prior.  It’s a nice little touch, and a welcome return for a character most people don’t even know exists.  As another astromech, R5 is prone to getting toys, since he can frequently make use of R2 parts.  That was the case for today’s offering, which is the Black Series version of the character.

THE FIGURE ITSELF

R5-D4 was released in 2017, as part of the vintage-carded-styled A New Hope 40th Anniversary sub-set of Black Series figures.  R5 was a GameStop exclusive, but was also available through Think Geek, due to their partnership at the time.  It so far marks his only time getting a Black Series release.  The figure’s just over 4 inches tall and he has 10 points of articulation.  His movement set-up is the same as R2’s, which tracks, since he’s largely the same collection of pieces as R2.  Like I said, frequently makes use of R2 parts.  It’s film accurate, so it’s not like it’s a bad idea or anything.  The notable change-up here is on the head, which swaps out R2’s dome for the more cylindrical set-up that R5 had going on.  It melds well with the pre-existing parts, and is generally a pretty nice piece in its own right.  R5’s paint work was notably a bit better than the basic R2 we had at this point, since in addition to getting a pretty solid selection of base color work, he also got a little bit of accenting on the white sections of the body in order to make him look a little grimy from being on Tatooine all those years.  It’s actually pretty minor, and a very good sample of work from Hasbro, especially for this era.  The weirdest part is the one stripe of reflective coloring on the head, which is actually a decal.  I’m not sure why, but it doesn’t look bad, and it’s in a spot where it being a decal’s not going to be quite as detrimental.  Unlike the first two releases of R2, which had a ton of accessories, R5 is barebones, with nothing beyond just himself in the package.  It definitely feels light, but then again, I have no clue what exactly you would give R5.  The ’90s opted for missiles, but that’s out of place these days, I suppose.  What a shame.

THE ME HALF OF THE EQUATION

R5 is a figure I came very close to buying new.  I saw him at the Think Geek in a mall in Seattle in the summer of 2017, and thought very seriously about buying him, since I’ve always liked him and all, but money was tight at the time, and I had already bought other stuff that day, so I wound up passing.  I never saw him again, and always kicked myself for not picking him up.  So, when this guy came into All Time a few months back, I jumped at the chance to get him, especially after his return appearance on The Mandalorian.  He’s not a figure that does a ton new, I suppose, but that’s just generally R5.  He’s still pretty darn nifty, and a little bit more unique than just another R2.  He’s a real sleeper figure for me.  You don’t expect to be all that impressed by him, but he’ll catch you off guard, in a rather subtle sort of way.

Thanks to my sponsors at All Time Toys for setting me up with this guy for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2768: Tusken Raider

Posted by Ethan Wilson in Reviews and tagged with , , , ,

TUSKEN RAIDER

STAR WARS: THE BLACK SERIES ARCHIVE (HASBRO)

“Fearsome desert savages, Tusken Raiders are the foremost reason Tatooine colonists do not wander far from their isolated communities.”

The Mandalorian gets a lot of credit for finally actually doing something worth while with Boba Fett and thereby making all the fuss around him finally worth it, but for me, it’s biggest tale of redemption lies not with Boba, but with Tatooine’s largely unexplored nomad populace, the Tusken Raiders.  The films portray them as little more than savages, generally a purely malevolent force.  The beat up Luke, shoot at Anakin, and murder Shmi….not exactly in that order.  Even when Anakin slaughters an entire camp of them, we’re largely meant to be concerned with the effect said killing has on Anakin, not looking into the horrific slaughtering of a camp that just occurred.  In The Mandalorian, we not only have our first non-antagonist interaction with the Raiders in the mainstream cannon, but also see our first “heroic” character that doesn’t immediately treat them as horrific monsters.  Din’s brief communication with them in Season 1 demonstrates that they do in fact have a language of their own (just a largely non-verbal one, which was a fascinating change), but also hints at something more complex to their culture than violent acts.  Season 2 delves even further, giving us a closer look at their true nature, and even allowing them to actually be good guys for a change.  Perfect time for a re-issue of their Black Series figure, I’d say!

THE FIGURE ITSELF

The Tusken Raider is part of the fourth assortment of The Black Series Archive.  This whole assortment is dedicated to reissuing army builders, specifically ones that have some new found prominence courtesy of The Mandalorian.  The Raider re-releases the one that showed up twice before, both in 2017, once as part of the main line, and once as part of the 40th Anniversary for A New Hope.  All three figures are effectively the same, especially with no need for updated face printing and the like.  The figure stands 6 inches tall and has 27 points of articulation.  The articulation scheme is definitely a product of it’s time; he’s pretty much got the same set-up as the ANH Obi-Wan, so the elbows are slightly restricted in movement, and the legs are kind of encased in the plastic skirt.  It’s not the end of the world, though, and it’s certainly not the worst the line had.  In fact, it’s pretty useful, once you kind of reset yourself back to how the articulation was earlier in the line.  Fortunately, though the sculpt may be older, the actual sculpting work is really top notch.  It definitely ranks very highly on the scale of Hasbro’s sculpts for this line, with the work on the head in particular being a fantastic example of realistic detailing at this scale.  It really does a spot-on job of capturing the Tusken’s head gear as seen in the movies.  The rest of the sculpt isn’t too bad itself, detailing the various layers to the clothing, as well as the smaller work on the bandoliers and belt.  It’s all topped off with a cloth robe piece, which melds well with the sculpted elements, and also adds a bit more flowiness to the design.  Technically, you can remove the robe, but I opted not to get into that, as it didn’t look very easy to get back in place properly.  The paint work on the Raider is pretty decent work.  The base work is generally pretty clean (although there’s a little slop on the edges of the bandoliers), and there’s a fair bit of accent work on the wraps, which does a nice job of bringing out the sculpted details.  Given Hasbro’s tendency to skimp on some of the painted details for this line, it’s nice that they went the extra mile here.  The Raider is packed with a selection of extras that’s definitely designed with optimal army building in mind.  He’s got a rifle, as well as a Gaderffii stick with three different attachments for the top, allowing for some customization.  Both pieces are easy for him to hold, and are nicely detailed items in their own right.

THE ME HALF OF THE EQUATION

I missed out on the first two releases of this figure, since 2017 was kind of a lighter year for me in terms of income, and subsequently in terms of buying as well.  At the time, I didn’t really feel like I needed the Tusken Raider, so I didn’t feel terribly as if I’d missed out.  Their appearances on The Mandalorian gave me a new appreciation for them, so I was definitely glad to get another chance with this re-release.  The figure’s a very nice one, and was definitely one of 2017’s best sculpts.  Even now, it’s no slouch.  I didn’t know what I was missing, but now that I do, I’m very happy to have added this one to my collection.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2767: Mandalorian Loyalist

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

MANDALORIAN LOYALIST

STAR WARS: THE BLACK SERIES (HASBRO)

“When Darth Maul betrayed and defeated Pre Vizsla, Death Watch splintered into two groups. Those who wanted to embrace Mandalore’s warrior heritage remained loyal to Maul.”

Okay, so, I can’t help but feel that the bio above would actually be more appropriate for the *other* Mandalorian trooper from this particular set.  You know, the one that was a figure of one of the Mandos that actually was loyal to Maul?  Rather than this guy, who is clearly meant to be one of the Mandalorians who sticks with Bo-Katan and is on the “heroic” side of the Siege of Mandalore?  Oh, god, I’m critiquing bios again.  I gotta stop letting myself do that!  I’m probably really messing hardcore with some poor copy writer at Hasbro who’s just trying to do their best.  Why can’t I just leave them alone?  It’s just toys!  And it’s not even the part of toys that anyone really cares about, either!  …I mean, not that it’s not a very important part of the job.  You go, copy writer!  …Where was I?  Ah, yes, action figure review.  Yes.  Let’s do that.

THE FIGURE ITSELF

The Mandalorian Loyalist is figure #04 in the Clone Wars sub-set of Star Wars: The Black Series Phase IV.  He’s part of the Walmart-exclusive four figure assortment based on the final arc of The Clone Wars.  The set hit shelves last fall, in theory at least, though in practice most people are still waiting.  As touched on above, this figure is based on the armor worn by the Mandos that remained loyal to Bo-Katan, and kept their slightly more heroic looking blues and greys.  It’s not as ornate as the Super Commando, but it’s about function over form, I’d imagine.  The figure stands 6 inches tall and he has 27 points of articulation.  Structurally, this figure is virtually identical to his Maul-supporting equivalent.  That means he too is built from a lot of Jango’s parts.  It’s still a clunkier body than what we’re used to these days, but after now having two Mandos built on it, I’m warming a bit more to its overall look.  Perhaps it just works a little better for this particular design.  He doesn’t get the updated shoulders from the last one, instead keeping Jango’s less pointy ones.  He keeps the modified belt and upper legs of the Super Commando, which brings him more in line with the animation designs.  His only truly unique piece is his helmet, which is similar to the Super Commando one, but without all the horns.  Like I noted above, this new helmet’s not super showy or anything, but it gets the job done, and it does look nice.  The paint work on the Loyalist is what really separates him from the Super Commando.  He’s a lot bluer, and a lot more subdued, but it’s a good look.  There’s some solid work on the weathering for his armor, as well as the markings on each of his shoulders.  There are a lot of details on this one that are easy to miss.  The Loyalist is packed with the same accessories as the Super Commando: a jetpack borrowed from Jango and a pair of pistols borrowed from Sabine.

THE ME HALF OF THE EQUATION

I didn’t really have a ton of luck with this assortment at retail.  Max was able to set me up with the Super Commando, but I saw none of the others.  That certainly bummed me out, because, ideally, I kind of wanted the whole set.  This guy was probably my second most wanted figure of the bunch, so I was hoping for another shot.  Fortunately, he came in with the same trade that netted me the Clone Lieutenant I reviewed yesterday, making the whole “getting him” part that much easier!  This figure surprised me a little bit.  I wasn’t let down by the Super Commando or anything, but after getting him, I expected very little from this one.  I was pleasantly surprised by how nicely he turned out, and by how much work Hasbro put into this seemingly more basic design.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2766: Clone Trooper Lieutenant

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CLONE TROOPER LIEUTENANT

STAR WARS: THE BLACK SERIES (HASBRO)

“Throughout the Clone Wars, Clone Troopers fought the Battle Droids of the Separatists across the galaxy. They were loyal to their Jedi generals and the Supreme Chancellor.”

When introduced in Attack of the Clones, the Clone Troopers originally made use of varying colored stripes in order to differentiate ranks amongst the many identical guys running around during the big battle on Geonosis.  Red were captains, yellow were commanders, green were sergeants, and blue were lieutenants.  Of course, then the final film came along, and pretty much everything of note was done by the all-white regular clones….but it was the thought that counted, right?  When The Black Series‘ first Clone Trooper body was introduced, Hasbro got to work doing the various ranks.  The basic, captain, and sergeant got main-line releases, and the commander was part of a boxed set…and then?  Nothing.  There was a break, and the line eventually got a new clone body.  But before entirely retiring the original body, Hasbro decided to throw some of the longer-term collectors a bone, and actually finish out the original set, with one last release, adding the lieutenant to the ranks after all these years.  That was awfully nice of them, wasn’t it?  And I bet it was super easy to get, too.  Right?  Yeah….

THE FIGURE ITSELF

The Clone Trooper Lieutenant is officially the first figure in the Attack of the Clones sub-set of Phase IV of Star Wars: The Black Series.  He was released exclusively through Walgreens, and hit retail at the tail end of last year.  I mean, in theory, at least.  He wasn’t really super widespread or anything.  Granted, he also wasn’t quite as in demand as other Black Series exclusives at the same time, so it was a little hard to track.  It probably could have been worse.  The figure stands a little over 6 inches tall and he has 29 points of articulation.  He’s built on that original Clone body, which I reviewed first when I looked at the Sergeant.  It’s got some troubles with the articulation layout, especially on the elbows and shoulders, but it’s far from the worst thing that Hasbro put out.  On top of that, it’s still a pretty nice looking sculpt, so it’s certainly got that going for it.  I very much liked it when it was new, and I still do like it quite a bit, even now, when there’s technically a better option out there.  The main thing that differentiates this guy from the other clones on this body is, of course, the paint.  The lieutenants were blue, which is a very nice, and also very familiar look for clones.  The actual shade of blue here’s not really right; the lieutenants were a lighter shade of blue, in contrast to the darker shade of blue that became more common with the 501st troopers.  So, this one’s technically not quite right.  Of course, the Lieutenants are largely theoretical in the films anyway, so it’s not really the end of the world there, I suppose.  Just sort of odd.  I do like that they changed him up ever so slightly from the others in terms of how the paint was applied, giving him a little bit more wear on his paint.  He looks like he’s actually made it through a battle or two, which is cool.  Like all versions of this mold, he’s packed with the two different blaster rifles.

THE ME HALF OF THE EQUATION

When this figure was unveiled, I was excited, then not.  Partially, it was the reveal that he was an exclusive, and partially it was that he was on the old body.  I opted not to really go hunting for him, since I’m expecting he’ll probably get updated to the new body at some point.  However, when one of them came into All Time via a trade, I did find it a lot harder to say no, and ultimately didn’t.  That’s how I’m reviewing him, and all.  He’s not breaking molds, or doing anything new, and honestly, he’s actually a bit inaccurate, but he’s still a clone, and clones are just usually a lot of fun.  This one’s really not different, there.  He’s fun.  And he’s blue.  And that’s pretty cool.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2765: Jar Jar Binks

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

JAR JAR BINKS

STAR WARS: THE BLACK SERIES (HASBRO)

“As an outcast, Jar Jar spends much of his time in the Naboo swampland. It’s there that the hapless Gungan encounters a pair of Jedi as they elude enemy forces.”

In the over two decades since the Star Wars prequel trilogy began, the opinions on it have shifted somewhat.  In general, it does seem to at least owe to the fact that Star Wars fans just like to hate the newest thing, and there’s the new era of movies to hate on, so I guess that helps?  We’ve come so far from the hatred of the prequels, that even the most hated element of the prequels, Jar Jar friggin’ Binks, isn’t even all that hated any more.  I know.  I’m shocked too.  Even more shocking?  There’s an honest to god deluxe release Black Series Jar Jar, like, actually available to buy.  Like, from real stores.  I know.  And now I’m reviewing it.  Again, I know.  Weird, right?

THE FIGURE ITSELF

Jar Jar Binks is figure 01 in the Phantom Menace sub-set of Star Wars: The Black Series‘ fourth phase.  So far, we know of no more TPM figures, at least in the main line, but Jar Jar’s presence suggests there will probably be more.  It’s thus-far the least explored entry in terms of Black Series, so it makes sense to do some more.  Jar Jar is at the deluxe price point, which makes him the second such figure since the line’s re-branding under the new phase.  There’s been a little bit of discussion about whether it was wise to put him at the higher price, and if he truly warranted it.  Whatever the case, the figure stands 6 1/4 inches tall and he has 27 points of articulation.  Jar Jar’s articulation isn’t *quite* up to the standards of other Phase IV figures, but it’s certainly on par with a lot of the better Phase III figures, suggesting that he was possibly designed a little earlier and then held onto?  There’s certainly a lot of good posing to be had with the articulation he’s got, and he’s a far cry from the line’s earliest entries.  The sculpt is a pretty strong recreation of Jar Jar’s 1999 animation model.  The proportions are definitely there, and there’s plenty of smaller detail work that’s gone into him.  The head’s get the best work, which isn’t terribly surprising, I suppose, since his TPM design was largely pretty unimpressive apart from the design of the head.  The head sculpt gets all of the important details, and presents a far more reserved Jar Jar than we see for most of the movie.  It’s certainly a different choice.  Honestly, it’s probably the right choice.  The figure’s paint work is actually pretty solid for the most part.  The patterns on his skin are definitely impressive, as is the work on the face, which makes use of the printing technique.  There’s a lot of rather subtle work on the skin, and I definitely like to see that.  The only thing I’m not too crazy about is the wrist joints, which are molded in the off-white of his under arms, a color which is exposed when his hands are posed.  It’s kind of a necessary evil, and generally pretty minor, though.  Jar Jar’s accessory selection includes a staff, shield, and Atlatl weapon (the ball on a stick thing).  The shield and staff are pretty sizable, and are presumably meant to aid in justifying the cost.  Personally, I’d have liked to see some more character specific stuff, like maybe some extra heads with different expressions, or maybe even an extended tongue.  I mean, the Gungan battle stuff it cool too, and will certainly have more re-use potential if they decide to do other Gungans, but it feels sort of out of place with Jar Jar himself.

THE ME HALF OF THE EQUATION

Alright, time for my crazy, controversial opinion: I’ve never really hated Jar Jar.  In fact, when the movie first came out, I kinda liked him.  Don’t get me wrong, I get some of the complaints about the character, and there are certainly some discussions to be had about some of the potential stereotypes present and the negative connotations they might carry.  But, on his own, I don’t find him quite as monumentally bad as some people did.  I mostly went along with it, because it felt like a bit of an uphill battle.  Fortunately, time, as well as his appearances in The Clone Wars have at least quieted down the hatred a bit, so, hey, he’s gotten another toy.  Cool.  I knew this guy was coming before he was officially announced, and I knew he’d be deluxe, but I didn’t quite know what that would entail.  I wasn’t really expecting the extra weaponry, and I question whether it was the right choice.  Jar Jar is, even in these slightly more Jar Jar-tolerant times, a harder sell than other characters, so adding the extra $10 to his retail might be an iffy prospect.  That said, the core figure is pretty nice, and the extras aren’t the worst thing.  I’m overall happy with my purchase, and I think most people who are willing to pick him up will be, too.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2762: Ultraman Ace Suit

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ULTRAMAN ACE SUIT

ULTRAMAN (THREEZERO)

Another Ultraman review?  This soon?  But, it hasn’t even been two months since the last one!  How am I going to fit this into my “only managing one Ultraman review a year” set-up? I guess I’ll just have to adapt.  Poor, pitiful me.  My recent Ultraman focus has really been honing in on the recent(ish) Anime series, which has generally been pretty good in terms of merchandizing and the like.  Most of that merch has been courtesy of Bandai, who generally have the hold on the market for all things Ultra.  In the last year, however, ThreeZero has also been getting into the game, with a small handful of animation-based Ultras.  Today, I’m looking at my first one of those, Ultraman Ace!

THE FIGURE ITSELF

Ultraman Ace Suit is the third release in ThreeZero’s 1/6 scale Ultraman line, following the standard Ultraman and the Version 7 suit.  It’s a pretty sensible release order, what with following their order of appearance in the manga/show and all.  He’s specifically based on the animated version of the suit, which sports a slightly different color layout than the manga, adding a fair bit more red into the mix.  The figure stands about 11 1/2 inches tall and has over 30 points of articulation.  As with the Soundwave I reviewed, getting an accurate count on the joints is a little tricky, since a lot of the joints are there to help clear the way for other joints in the process of posing.  It’s still a little more straight forward on this guy than it was on Soundwave, making him generally a little easier to pose and re-pose, which does add a little bit to his playability.  I certainly had less concern about accidentally breaking parts off of this one, though it’s definitely still a good idea to glance over the included paper work, just to be a little more familiar with how some of those joints are supposed to move.  The hips in particular have a slight learning curve.  Ace is sporting an all-new sculpt, patterned on his appearance on the show.  Ace’s suit is definitely my favorite, and it’s very nicely translated here.  It’s clean and bold in design, and just generally looks very pretty.  There’s a lot of polish here, and the articulation has been nicely worked in so as not to impede any of that.  The figure has a worked in light-up feature, in both the head and torso, which illuminates the eyes and color timer.  It’s a nice, fairly consistent light, and definitely gives the figure that extra bit of pop.  Accessing the battery compartments is pretty easy, with the top of the head and one of his back plates popping out.  Ace’s paint work just adds to the overall slick look of the figure; that candy coating red color looks really sharp, and it adds up nicely with the clean look on the silver sections.  The application is all pretty nicely handled, with no real issues with slop or bleed over.  Ace is packed with four sets of hands (in fist, relaxed, open gesture, and flat posing), a Specium Blate effect piece that swaps out for his standard wrists, an alternate right arm in cannon formation, alternate extended wrist connectors, and swappable open panels for his arm guards and the thrusters on his back.  About the only thing I really think I might like to see extra is a display stand, but that’s not exactly a requirement.

THE ME HALF OF THE EQUATION

As I’ve established previously, the Ace suit is my favorite of the Manga/Anime Ultramen.  When the ThreeZero stuff first showed up, I was definitely intrigued, but I was able to hold off on standard Ultra and Ultra 7.  Ace, much less so.  I was pretty much sold from the word go on this guy.  He’s a really slick figure, and honestly he’s fantastic for the price they’re asking.  ThreeZero’s not a company I had much experience with prior to this year, but the two items I’ve picked up from them have left me very pleased.  I look forward to seeing what else they get into.

Thanks to my sponsors at All Time Toys for setting me up with this guy for review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2761: Casey Jones & Raphael in Disguise

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CASEY JONES & RAPHAEL in DISGUISE

TEENAGE MUTANT NINJA TURTLES: THE MOVIE (NECA)

“Now you can catch America’s favorite green teens in their first live-action blockbuster film!  After wading in a puddle of radioactive waste, these radical reptiles are transformed into New York City’s greatest crime-fighting quartet.  Raphael’s a skilled sai-wielding ninja.  Beware: when he gets angry, you don’t want to be around.  Casey Jones, the masked vigilante, carries a golf bag on his back filled with clubs, bats, and sticks…makeshift weapons in his war against crime.”

Hey, how about that totally not at all troublesome or even slightly infuriating topic that is NECA’s Teenage Mutant Ninja Turtles?  Which one in particular?  It doesn’t matter!  They’re all equally infuriating!  Yay!  Equal opportunity awfulness!  ….Okay, I’m gonna try not to let this be a review of me just complaining about distribution issues.  Those are no fun to experience, and even less fun to read about.  Let’s just skip past, shall we?  Remember back in early 2019, when I had a man on the inside a fiancee working at GameStop, which was pretty much the sole reason I was able to get a set of the GameStop-exclusive movie Turtles?  Well, NECA decided to do more of those.  And they were even harder to get than the first round, so they stopped giving them to GameStop entirely (not a bad decision, to be fair), and moved the movie-related stuff over to Walmart (a horrible decision, really).  Now, instead of single releases, they were doing two-packs, which they kicked off roughly around the middle of last year, starting with the pairing I’m looking at today, Casey Jones and Raphael in Disguise!

THE FIGURES THEMSELVES

Casey and Raph were, as discussed above, a Walmart-exclusive two-pack, released as part of NECA’s Teenage Mutant Ninja Turtles: The Movie line last summer….or they were in theory, at least.  It’s not like anyone really saw them–right, trying not to dwell.

CASEY JONES

Casey here is really the main appeal of this set, since he was previously unreleased by NECA, in any scale, or any style.  We got two of them last year, and neither one was particularly easy to–right, I’m dwelling again.  Don’t do that.  This one is movie-based, as you may have guessed from him being in a line that has “Movie” in the title.  This is a kind of big deal, since we’ve not gotten any form of movie Casey from any manufacturer prior to this one.  The figure stands 7 1/4 inches tall and he has 32 points of articulation.  He’s a little bit better in the articulation department than the Turtles were, showcasing some of NECA’s steps forward in that area since doing those guys’ sculpts back when they were still 1/4 scale.  In particular, he’s got much better range on his elbows, which have the same sort of structure as Brett did earlier last year.  Casey’s sculpt is all-new, and certainly on par with NECA’s usual work.  Since they didn’t get Elias Koteas’s likeness rights, the figure is without his face, instead keeping him permanently masked.  While it’s somewhat limiting, it’s also not that weird for a Casey Jones figure, since the vintage figure’s mask was sculpted in place too.  This one does at least look as if it *could* be removed, since it is actually a separate piece.  It’s a sharply defined and very clean piece, and definitely the best part of this figure.  The body sculpt does a respectable job as well.  The level of detail is definitely up to the standards of the other figures in the set; there are some spots where the articulation could be a little better worked in, especially on the knees, but for the most part, he’s pretty strong.  Casey’s paint work honestly isn’t all that involved for the most part, largely being just large open areas of solid color.  The shirt and vest do get some impressive accenting, however, and, apart from one spot on the side of his hair, the application is pretty clean.  Casey’s accessory selection is certainly one of NECA’s most impressive.  He gets four pairs of different hands (fists, loose grip, tight grip, and open gesture/flat grip combo), as well as his golf bag mentioned in the bio, which can be filled with his included hockey stick, goalie stick, golf club, two baseball bats, and cricket bat.  It certainly gives him a lot of options in how to bring the pain.

RAPHAEL in DISGUISE

Raphael largely exists as an excuse to make a two-pack out of this whole set-up, but I guess also as a way to get Raphael out another time, after the less than stellar distribution of the first two movie releases.  This one operates on the general thematic of Raph and Casey’s first interactions with each other in the first film, which has Raph in the aforementioned disguise, which amounts to a trench coat and hat.  How does this figure manage that?  By taking the previous Raphael (which I reviewed here) and putting him in a trench coat and hat.  The coat is a cloth piece, and is decent enough for the scale.  Some of the tailoring is a little oversized, but it’s not a terrible look, and it’s a pretty close match to the one he had in the movie.  It can be removed, if you so choose, but it’s not really optimized for it.  It’ll definitely take some doing (hence why I didn’t, what with already having one sans coat and all), but it’s possible.  The coat is held in place a little more so by a sculpted back pack, which is a reasonable enough piece.  The whole disguise is topped off by the hat, another sculpted plastic piece.  It’s designed with a hole at the back, so that it can sit more properly on the head, while still allowing for the knot on the back of his mask to be left undeterred.  It’s a little janky to look at from behind, but it does stay in place pretty nicely.  In terms of accessories, Raph has the same alternate hands, alternate ties to the mask, slice of pizza, and sais as the single release, but also adds an extra set of hands which are pointing, you know, for pointing purposes.

THE ME HALF OF THE EQUATION

I’ve always been a Casey Jones fan, and I’d go so far as to say he’s my favorite part of the TMNT mythos.  Despite all this, I owned no Casey Jones figures beyond the Minimate, which seemed wrong.  I’d been hoping for NECA to do some version of Casey, so I was interested in this one, but then there was the whole distribution thing.  That was a mess, wasn’t it?  Fortunately, I’m a patient man, so I just kind of avoided the whole issue for the entirety of the last year.  As luck would have it, my patience paid off, and someone happened to trade this set into All Time last month, at last giving me the opportunity to get one without having to deal with Walmart.  Yay for me!  Casey’s definitely a nice figure, worth the wait, but also not really worth the mark-up, so I’m glad I didn’t pay it.  Raph is kind of redundant for me, and I ultimately decided not to hang onto him, but he’s still as good a figure as the first release.  If someone didn’t get that one, I imagine this one would be a great alternative.  Perhaps even a better one, really.  Whatever the case, I’m just happy to have a Casey to go with my Turtles.  Now, here’s to hoping that April’s not quite as much of a nightmarish ordeal to acquire.  Man, even *I* don’t believe myself when I say that…

#2758: Evangelion Proto Type 00/00

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

EVANGELION PROTO TYPE 00/00

ROBOT SPIRITS (BANDAI)

Despite being a pretty big fan of the whole big mechas versus big monsters sub-genre, I somehow managed to avoid any major exposure to anything Evangelion until the last two years.  I know, shame on me.  Last winter I marathoned my way through Neon Genesis Evangelion and it’s follow-up movies, and then after a few months, my brain started working again, and now we’re kind of here?  I did enjoy the show, despite it’s brain breaking properties, and I certainly was down for some toys.  Fortunately for me, there’s a lot of options on that front!  I’m decidedly going with something generally more on the recent side, and I’m kicking off my collection with Eva Unit-00, who I’m taking a look at today!

THE FIGURE ITSELF

Evangelion Proto Type 00/00, or Unit-00 for short, was released as part of Bandai’s Robot Spirits toyline.  She’s figure 270 in the line, and marks the second of the Evas for the line.  This particular version of Unit-00 is based on her appearance in the Rebuild of Evangelion movies.  While Units 01 and 02 remain rather similar to their original designs, Rebuild does mix things up a little bit more for Unit-00, who in the original begins as an orange mecha, and then switches to blue for her more armored appearance.  In Rebuild, she instead keeps a more consistent orange and grey color scheme between both appearances.  The figure stands about 6 inches tall and has 54 points of articulation.  This sucker’s pretty darn mobile, with a very impressive range of motion.  My prior exposure to Robot Spirits was through the Pacific Rim figures, and they  were solid for what they were, but the posability definitely wasn’t like this.  The figure’s designed for a lot of deep poses, as the Evas are prone to get into within the series, and that definitely works out very nicely.  I was also quite impressed by the engineering of the articulation, and how it works within the sculpt.  By far the coolest part is on the neck, which has a segmented construction that actually simulates stretching and compressing.  It’s really cool.  In general, the sculpt, which is quite an impressive piece of work, does a really good job of working in the articulation in an aesthetically pleasing way, while still maintaining a nice bit of accuracy to the source material.  Speaking of accuracy to the source, Unit 00 has two different looks in Rebuild, and this figure is actually designed to replicate both of them.  Right out of the box, she’s in her later, more armored up appearance, complete with the shoulder pylon things.  The shoulders are even on separate joints, so that you can keep them properly oriented, and out of the way of the arms when posing, which is pretty cool.  The shoulders, chest plate, and part of the thighs swap out for secondary parts, allowing for a conversion to the more streamlined appearance from earlier on, which looks pretty good too.  I’m more a fan of the out of the box set-up, but extra display options are always fine by me.  Unit 00’s color work is bold and clean, which is what you want to see on such figures.  A lot of it’s done through molded plastic, but the actual paint application that’s there is cleanly applied as well.  I certainly had no issues with it on my figure.  Unit 00 is quite nicely accessorized.  There are, of course, the previously mentioned alternate armor pieces, but on top of that she gets six sets of hands (fists, gripping, flat, relaxed, and two different styles of open gesture), an umbilical power cord, knife, smaller rifle, larger gun (complete with a spinning drum), handcuffs, an alternate open port for the plug, and some sort of crucifix antenna thing that I assume is somehow plot relevant to Rebuild.  It’s a really impressive selection of extras, and pretty much covers anything I could possibly think of wanting for the figure.

THE ME HALF OF THE EQUATION

Since I hadn’t seen anything Evangelion-related until the last two years, I also hadn’t gotten any of the toys, since I (typically) steer clear of toys for things I haven’t really experienced.  After watching the show, I definitely found Unit 00 to be my personal favorite of the main Evas, and I was definitely down for some version of it in toy form.  I’ve been looking at my options, and then this one wound up being the first of the Robot Spirits Evas to come into All Time, which certainly made my choice quite simple.  It’s a really fun figure, and probably the most fun I’ve had with a Robot Spirits release.  There’s so much cool stuff going on, and so many different options for display, but at the core of it, there’s a figure that’s just really, really fun to play around with.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.