Tag Archives: DC

#0561: The Flash

Posted by Ethan Wilson in Reviews and tagged with , , , ,

THE FLASH

THE FLASH (DC COLLECTIBLES)

FlashTV1

Live action and DC Comics have something of an iffy history. While they pretty much invented the modern Super Hero movie with Richard Donner’s Superman, most of their film work has been acceptable at best and horrifyingly bad at worst. On the small screen, they faired a little better, with popular runs of Superman, Batman, and Wonder Woman, but they kinda started to run out of steam. Smallville lasted for an insane 10 seasons, but I wouldn’t really call any of them particularly noteworthy. When they launched Arrow, I watched for about a half a season, but gradually lost interest. I figured that DC TV just wasn’t for me anymore. Enter The Flash. It’s fun, light-hearted, and it doesn’t seem to be shying away from the bolder aspects of the characters. And now it’s getting action figures.

THE FIGURE ITSELF

FlashTV2Flash here was just released last month as part of DC Collectibles’ The Flash line, based on the show. It’s sort of a spin-off of the Arrow line, and Flash is a single release figure (though he’ll soon be joined by Captain Cold). Flash is marked as figure 01, so clearly DCC is planning on there being at least a few of these. The figure stands about 6 ½ inches tall and features 30 points of articulation. In case you hadn’t already pieced it together, Flash is based on the character’s appearance on the TV series of the same name. The show design is, of course, based on the comics design, with a fair bit more texturing and the like added. The figure features an all-new sculpt. After dipping my toes into the DCC waters with several of their animated figures, the Flash is a little bit of a letdown. The sculpt certainly isn’t bad. There is plenty of texturing on the suit, and most of its finer details are nice and sharp. The problems with the sculpt are mostly related to its resemblance of actor Grant Gustin. Gustin is a pretty skinny guy, but he’s definitely not as lanky as this figure would have you believe. In addition, while the head features a passable likeness, the details are a little on the soft side. The figure’s paintwork is generally pretty decent. The colors seem to be a close match to those on the show, and most of the details stay within their designated areas. The only real weak point is the head, where the paint ends up being a little softer at the edges, although that’s at least in part due to the sculpt. The Flash is packed with three sets of hands, in fist, grip, and open poses. They’re perfectly fine additions, but the figure would have majorly benefited from the inclusion of some sort of stand to facilitate some deeper running stances.

THE ME HALF OF THE EQUATION

Flash was something of an impulse buy (which is fitting, I suppose). I don’t do that very often anymore, but my comicbook store had him sitting on the shelf, and I have been enjoying the show. The figure isn’t the most impressive figure ever made, and he hasn’t really swayed me on buying anymore of DCC’s TV-based figures. That said, he’s really not a bad figure, and I don’t regret the purchase. I’ll definitely be keeping an eye on the rest of the line, and I’ll probably end up picking up a few others, depending on the character selection.

#0519: Toyman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

TOYMAN

DC UNIVERSE CLASSICS

ToymanDCUC1

And here we have another DC Universe Classics review. Watch as the reviewer sets in on the figure. He first starts with the photograph, taking care not to frighten it away. Then, he sets out to write the review, making sure to avoid the dreaded “Mattel sucks” rant, for fear of scaring of the one or two viewers till reading after this, admittedly, very strange introduction. What does this have to do with toys? Not a thing! Okay, so for today’s review, let’s have a look at Toyman, a Superman foe who, ironically, hasn’t had many figures. How about that?

THE FIGURE ITSELF

ToymanDCUC2Toyman was released in the 18th Series of DC Universe Classics, a series commonly referred to as the “Super Friends” series. The line-up of the series featured four of the Super Friends-original “ethnic heroes,” as well as two unrelated figures, and Toyman here, who is based on the character’s rather unique appearance from the show. The figure stands about 6 ½ inches tall, and he sports 25 points of articulation. Toyman makes use of the tall skinny buck that Mattel implemented in the last five series of the line (after failing to do so several times before). It’s mostly the same body used on Creeper (reviewed here) though it’s a better fit for Toyman, who should be tall and thin, than it was for Creeper. The body is overall a pretty decent sculpt, but the arms and legs are a bit on the long side. The pelvic area is also really boxy, which looks odd in comparison to the rest of the sculpt. Also, the articulation is kind of a mixed bag. He’s one of the few figures to get double joints, but they’re only on his arms, not his legs, which feels odd. Adding to that the stiffness of the torso and the legs, and the arms just seem strange. In addition to the base body, Toyman has a brand-new head and an add-on for his shoulder piece. Both of these are pretty decent sculpts. I have to commend them on making the mask work in three dimensions, as I’m sure that wasn’t super easy. The face is really well done too; he looks pretty much exactly like the character did on the show, but done in such a way that he still fits very well with the rest of the line. Toyman’s paintwork is about par for the line. Everything is pretty much clean; there’s not really any slop to speak of. The line work is all pretty sharp, and the colors are all pretty bold. Best of all, the yellow doesn’t suck, which is always a good thing. Toyman included a spinning top, a yo-yo, and a piece of the Apache Chief Collect-N-Connect.

THE ME HALF OF THE EQUATION

I kinda passed on Series 18 when it was initially in stores. Not intentionally, or anything. It just kind of happened. I ended up finding Toyman, along with a fair number of other later series DCUCs, at Baltimore Comic Con. The dealer was offering a bulk deal, so my brother and I picked up 5 figures between us. Toyman was one of mine, and he was the one I wanted the most. I actually really like the goofy Super Friends design, and it’s the one I most associate with the character. I was bummed when DCD’s Super Friends line didn’t get to him, so I’m happy that he showed up here. The base body isn’t without it’s issues.

#0512: Green Arrow

Posted by Ethan Wilson in Reviews and tagged with , , , ,

GREEN ARROW

DC UNIVERSE CLASSICS

GreenArrowDCUC1

In a lot of ways, Mattel’s DC Universe Classics was really the true successor to ToyBiz’s run on Marvel Legends. Now, before you grab the pitchforks and the torches, hear me out. Both lines were the hottest action figure line around at the time of release, both offered a surprisingly expansive look at their respective universes, and both were renowned for their representations of obscure characters. They’ve also both begun to show their age, and they were both a pain in the butt to collect. And of course, they both have their fanbases, who don’t tend to like being compared to each other. If I go missing, you know where to look. In the moment, I think I enjoyed collecting DCUC a bit more, just because I gained more of a mastery of tracking stuff down online, which made getting the figures I wanted a whole lot easier. So, why not have a look at one of my favorite figures from that line, Green Arrow.

THE FIGURE ITSELF

GreenArrowDCUC2Green Arrow saw release in the 9th Series of DC Universe Classics. He served as the “anchor figure” of the series. With shows such as Arrow on the air, Green Arrow being an anchor figure nowadays wouldn’t be a huge shock, but at the time, it was actually a pretty bold move. However, given the presence of another 11 series of the line after this one, it’s safe to say it paid off okay. The figure is about 6 ½ inches tall and he has 27 points of articulation. He gets an extra two points of articulation compared to others in the line thanks to some hinge joints at the wrist, in addition to the usual swivel joints. It’s a nice addition, although it would have been nice if they’d made it standard to the line. Green Arrow is based on Oliver Queen’s Bronze Age (read: 70s-80s) appearance. It’s easily the character’s most distinctive look, and it’s one he’s returned to many times over the years. Also of note, it’s the look he had in the DC Super Powers line in the 80s, which was what Mattel was working to recreate.  DCUC generally operated on the buck system, but characters such as Green Arrow tend to need more unique pieces than others, resulting in him being more new than re-use. The waist, upper legs, and shoulders are re-used from the medium sized buck, but I believe everything else on the figure is new. Ollie ended up with one of the best sculpts DCUC had to offer in that regard. All of the little details of the costume are sculpted, and they are done with the necessary precision. They are also spot on to design from the comics, right down to those weird draw string things on the front of his costume. The pointed shoulders of his costume also help to mask the slightly large shoulders that were an issue with the line, and the rest of the pieces being new meant that Ollie ended up with a build that was appropriate to him. The figure’s hands are both sculpted to work well with the accessories, and they really turned out great. The head sculpt really makes this figure, perfectly capturing the Neal Adams Green Arrow of the 70s. He’s got just the right “charming rogue” look, which sells the character really well. In addition, they’ve managed to render his hat in three dimensions without it looking the slightest bit silly, which is really great. Where the figure ends up falling down just a bit is the paintwork. The paint certainly isn’t bad. In fact, the colors are well chosen, and it’s overall pretty clean. However, there’s a little bit of slop and bleed over. The worst thing on my figure is the airbrushing, particularly on the face. What was clearly meant to be a little bit of color on his cheeks ended up looking rather ridiculous, almost to a clownish level. The figure included his signature bow, a few different arrows, and a clear blue display stand. The bow ends up being another point of contention. There’s an arrow molded to it, meaning not only can the other arrows included not be used at all, but he also can’t draw the bow back any further, and he looks silly when just holding the bow one handed. Why Mattel decided to handle it this way (and to continue to handle it so on all the archers that followed) is baffling.

THE ME HALF OF THE EQUATION

Amazingly enough, Green Arrow is one of the DCUC figures I ended up finding at retail with no real issues. I stumbled across him (as well as Black Canary) at my local Target and happily purchased him. Issues with the bow aside, this was one of the best figures that DCUC had to offer, and he still holds up, even while the rest of the line begins to look dated. It’s a shame that Mattel couldn’t keep up the effort they put into this figure.

#0507: Orion

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ORION

DC COMICS – THE NEW 52 (DC COLLECTIBLES)

Orion52a

What’s this? A New 52 review? On The Figure in Question? Is that right? Can we think of any more questions? We can? Should we stop? Yes. Yes we should.

Shocking as it may be, I have bought, and am now reviewing, a DC New 52 action figure. Of my own volition. Nobody’s pointing a gun at me or holding my family hostage or anything. Of course, it’s still me. Did I buy a Batman or a Superman or something? Of course not, that would be dumb. I bought Orion. If you don’t know who the heck Orion is, then that’s probably about right. But I know who he is, and that’s what really counts here. (If you really want to know: Orion is one of the New Gods, a group of characters created in the 70s by comics great Jack Kirby, after he left Marvel to work at DC. Orion is the son of the generally more known Darkseid.) So, let’s see how this guy turned out!

THE FIGURE ITSELF

Orion52bOrion is part of DC Collectibles’ expansive (and apparently soon to end) DC Comics – The New 52 line. He was released in August of 2014. According to the back of the box, his fellow figures are Super Girl and Batgirl, but I think Orion was sort of meant to be a solo release. The figure is just shy of 7 inches tall and he has 20 points of articulation (plus a flip up visor!). Articulation hasn’t been one of DCC’s strong suits in the past, but it’s actually pretty good here. The only key joints I’d say are missing would be some sort of hinge joint at the hips (a la DCUC) and some ankle joints, but the figure is serviceable without them. Orion is, as one would expect, based upon his appearance in DC’s New 52 line of comics. More specifically, he’s based on Cliff Chiang’s work with the character in Wonder Woman, which is where the majority of his New 52 appearances have occurred. His design has been changed a fair bit from his classic look. Admittedly, aside from the helmet, Orion’s classic look was a teeny bit on the bland side, so a re-design isn’t a terrible thing. The more conventional spandex and underwear on the outside look has been replaced with a look that has bit of a pulpy space biker look to it. It’s, and I can’t believe I’m saying this about a New 52 design, a pretty solid look. It isn’t needlessly detailed; there aren’t any odd bits and bobs sticking off of him; he doesn’t have lots of random etchings everywhere; it just looks good. The figure’s sculpt does a very nice job of translating this design into three dimensions. The proportions are all pretty good, and the whole sculpt is incredibly detailed. The rough texturing of the jacket and boots up against the smoother texture on the pants adds a great bit of dimension and realism to the figure, and they’ve managed to actually make the helmet look pretty good, which has always been a n issue with Orion figures in the past. The flip up visor is a little on the bulky side, but not too bad. I definitely like him more with the visor down, but the underlying face is a well done interpretation of Orion’s angry visage. Orion’s paint work is pretty good, but not great. It’s certainly not bad, but a few of the lines on his coat are out of place, and there’s a strip of up-painted plastic along the top of the left side of his collar. Also, the figure’s skin is really pale, especially when compared to the prototype pictures. On the plus side, the differing sheens on the various parts of the costume are a really cool touch, and do show that DCC is putting some thought into the figures. Orion includes his trusty Astro-Harness. It’s a bit awkwardly designed, and he kind of has to ride it like a Segway, which is a bit goofy looking. In addition, it can be a bit difficult to get the handles in and out of the hands. I actually broke one if the handles off the harness trying to remove it, so be careful. It’s a key piece for the character, so I’m glad it’s included.

THE ME HALF OF THE EQUATION

So, why did I get this New 52 figure months after it was released? It’s my comicbook store’s fault. I had a coupon for 40% off of one item in the store, and I used it on this guy. I’ve actually been contemplating getting this figure since before it was released. I’ve always liked Orion, and even though I haven’t read his recent appearances, I thought this was a pretty cool design. 40% off was enough to get me to cave. I’m glad I got him. He’s a very nice figure. And now he’s making me reconsider some of the other New 52 figures. Crap…

Orion52c

#0459: Robin

Posted by Ethan Wilson in Reviews and tagged with , , ,

ROBIN

BATMAN ’66 (HOT TOYS)

Alright, here we are with the second part of our little break into “Ethan reviews someone else’s toys.” Yesterday, I took a look at the Hot Toys version of Adam West’s take on Batman from the popular 60s TV series. It’s only fitting that I follow it up by taking a look at Batman’s partner in (fighting) crime, the only bird more dangerous than a sparrow with a machine gun, Robin the Boy Wonder!

THE FIGURE ITSELF

Like Batman, Robin is part of Hot Toys’ Movie Masterpiece Series. He’s figure MMS 219, which places him directly after Batman in the numbering of the line. Robin is about 11 ½ inches tall, which makes him just a slight bit shorter than Batman, and (going by the Sideshow website) he has 30 points of articulation. He’s based on Burt Ward’s portrayal of the character in the 1960s TV show and Movie, though according to the solicitations, he’s specifically movie based.
One of HT’s claims to fame is their incredible likenesses. In all honesty, Robin isn’t one of their more spot on ones. While Batman was very clearly Adam West, the likeness is a bit more debatable on Robin. From certain angles, it definitely looks like Burt Ward, but from others it’s not quite as clear. However, the sculpted mask does a lot to fill in the blanks, so I don’t think anyone will be lost on who this is supposed to be. Overlooking the minute issues with the likeness, the sculpt features all the fantastic detailing we’ve come to expect from Hot Toys. In a similar fashion to Batman, the mask has been done as a separate piece, which gives the head sculpt the right amount of depth and layering. The paintwork on the head is nothing short of amazing. There’s absolutely no slop or bleed over, and the detailing is superb.  It looks like a real person.

Robin’s costume is made up of nine parts in total. He has his signature shirt (with different colored sleeves), a cape, a pair of shorts, and a pair of flesh tone tights, as well as a sculpted belt, boots, and gloves.  Overall, everything is pretty well tailored, though there are a few minor issues. While Ward’s costume was a little off in the movie, the shirt and shorts overemphasize this. The shirt is too short, and the shorts are too long. However, with some futzing, this could be mostly fixed. The cape also seems just a bit too short, which is even more noticeable, given the thickness of the material. The sculpted pieces are all excellent, and they match up pretty much exactly with the pieces from the show. Robin’s body is a better fit for him than the body on Batman was for that figure. Perhaps it’s due to Ward having had a more basic body type, but it seems the standard slim TrueType worked out well.

Robin is armed with a nice assortment of accessories, though not quite as many as Batman (in all fairness, Robin retailed for $15 less.) He features:

  • 8 interchangeable hands
  • Batarang
  • Bat-cuffs
  • Bat-Radio
  • Bat Rope
  • Display Stand

The figure’s hands include the following poses: a pair of fists, a pair for gripping, a pair with a two finger gesture, one looser grip, and one for receiving a fist (to replicate one of Ward’s signature poses.) Unlike Batman, these hands are more meant for posing than for accessories. Each of the hands is well sculpted, and they all swap out pretty easily.

At first, it seems like the Batarang is a piece of re-use, however closer examination shows that it’s actually a different, smaller Batarang than the one included with Batman. It’s well sculpted, and has the same hole for the Bat Rope that the other Batarang has.

The Bat-Cuffs represent another fairly standard Bat-accessory. It’s nice to see that HT thought to give Robin something not included with Batman. The cuffs are nicely done; they open and close like real cuffs, and even have a metal chain between them.

The Bat-Radio and Rope are the same as the ones included with Batman. The Bat-Radio is still a cool little piece and the Rope is still just a piece of string.

Finally, Robin includes a standard display stand. It’s been decorated with his name and the Batman ’66 logo.

THE ME HALF OF THE EQUATION

So, this is another figure belonging to my friend Lance, which he’s very kindly allowing me to review. Overall, the figure has its issues, but it’s pretty good. At first, I was a little let down by Robin, especially after the really fantastic Batman. However, placing the two figures side by side, every problem fades away. These two really make for a killer display. For once, I’m rather envious of someone else’s action figure collection.

#0458: Batman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BATMAN

BATMAN ’66 (HOT TOYS)

Okay, so today and tomorrow I’ll be doing something a little different for the site. As I’m sure readers are aware, the reviews I post here are of my own personal collection. Of course, I do have the occasional guest review, but that’s still the owners reviewing their stuff. Today, I’ll be doing my first review of an action figure that isn’t mine.

I’m no stranger to Hot Toys figures, and I even have a rather large collection of them. However, in the last year or two I’ve had to move away from them. The figures are rather expensive, and they keep getting more so, to the point that I really couldn’t keep up. This meant missing out on a number of figures I’d been looking forward to, such as today’s subject, Batman.

THE FIGURE ITSELF

Batman is part of Hot Toys’ Movie Masterpiece Series, and he’s figure MMS 218 in that particular line. Batman is roughly 12 inches in height and, according to the Sideshow website, he has 30 points of articulation. The figure is based on Adam West’s portrayal of Batman in the 60s TV show and movie. Going by the accessories, this is specifically based on the 1966 movie.

Let’s kick things off by looking at the head. Simply put, the head sculpt is phenomenal work. The cowl is an expert recreation of the one worn by West in the movie, down to the slightly droopy ears, and the underlying face is the spitting image of Adam West. The use of separate molded pieces makes it so that the figure has all the proper dimension, resulting in a sculpt that really looks like a guy wearing an actual mask. The paintwork is just as fantastic as the sculpt. Everything is incredibly clean, and the work on the skin makes him look like a miniaturized person. All of the detail work is done with the appropriate level of subtlety. The cowl has been painstakingly painted to match the actual cloth of the cape in color and sheen, which is certainly no easy feat.

Batman’s costume is made up of nine pieces. He has a basic gray bodysuit, with a cloth cape, shorts and lower cowl, as well as sculpted boots, gloves and utility belt. The bodysuit is pretty well tailored, though some of the stitching is a bit bulky. The shorts seem a little loose, but they’re better than some of HT’s previous attempts, so they’re learning. The cape is decently tailored, though it seems too thick. They’ve also placed snaps in a few places to help with placement, which are a bit cumbersome. The gloves, boots, and belt are superbly sculpted, and very nicely painted as well. I particularly like the actual metal belt buckle, which is a wonderful recreation of the original prop. Perhaps my biggest issue with the figure’s costume isn’t actually the costume, but the body beneath it. HT tries to make use of the current version of their TrueType body whenever they can, which is understandable. However, the body is definitely too fit for Adam West as Batman. So, they’ve decided to add padding to mask this. The thing is, West wasn’t overweight, or anything, just not super cut, so the end result is that the figure looks a bit too chubby for West’s Batman.
Like any good Hot Toys figure, Batman comes with a very nice assortment of accessories. The figure includes:

  • 11 interchangeable hands
  • 2 interchangeable face plates
  • Batarang
  • Shark Repellant Bat Spray
  • Bat-Radio
  • Bomb
  • Bat Rope
  • Display stand

The figure’s 11 hands include: a pair of fists, a pair for carrying the bomb, a pair for doing the Batusi, a pair for the batarang, a hand for the Shark Repellant Bat Spray, a hand for the radio, and a hand gesturing with two fingers. The majority of the hands are made for interacting with the accessories, which they do superbly, and the remaining hands allow for a lot of really fun poses. The hands are all very well sculpted, matching up to the glove pieces very well. They also swap out a lot easier than most HT hands, though they still threw in a spare set of wrist pegs, just in case any accidents happen.

In addition to the regular expression already present on the figure, he includes two more face plates with differing expressions. One features gritted teeth, allowing for a variety of more intense poses. The other is closer to the regular expression, but with the mouth open, as if Batman is about to speak or is in quiet contemplation. It’s a rather signature look for West, so it works. Both faceplates are just as good as the regular one, and they swap out with relative ease.

The Batarang is a rather standard Batman accessory, so it would be criminal for it to be excluded. The batarang is well sculpted, and fits well in the figure’s hand. It has a small hole on one end, allowing for the rope to be fed through it.

The Shark Repellant Bat Spray is one of the two very movie specific accessories included. Essentially, it’s just a spray can, but it’s well sculpted and very well painted. It fits very nicely into the appropriate hand, and it makes for a rather cool display.

The Bat-Radio is a neat little accessory, even if it doesn’t have the gravitas of some of the other accessories. It’s very well sculpted, and very accurate to the source material. It even has an actual metal loop at the top.

The Bomb (which sometimes you just can’t get rid of) is the other movie-specific accessory, and it’s probably my favorite accessory included. It’s a pretty simple piece, but it’s spot on to what it should be.

The Bat Rope is, well, rope. I didn’t take it out, but I assure you, it’s just some string.

Lastly, Batman has a display stand. It’s just the standard display stand, with his name and the Batman ’66 logo on it.

THE ME HALF OF THE EQUATION

Like I said in the intro, Batman’s not mine. I had wanted one, but I just couldn’t justify spending the money. At my family’s New Year’s Eve party this year, my friend Lance noted that I hadn’t reviewed the figure, and asked if I’d like to borrow his to review. I should point out that he said this while handing me the figure. I believe my response was a series of sounds that approximated a yes. While I’m bummed that I didn’t get one of my own, I think getting to mess around with the figure has helped dull the pain a bit. The figure has a few small flaws, but it’s a fantastic figure, and it’s easily the best West Batman on the market, perhaps even the best Batman period.

#0440: Brainiac

Posted by Ethan Wilson in Reviews and tagged with , , ,

BRAINIAC

DC SUPER FRIENDS (IMAGINEXT)

And now for Christmas Reviews Part Three!

In the current, extremely adult collector driven action figure climate, it can be easy for toy companies to overlook kids, their original target audience. As figures have become more detailed, they have also become more fragile. And that’s to say nothing of the virtually impossible task of getting certain figures. Fortunately, toy companies are starting to catch on, at least a little bit. It’s no secret that I have my issues with Mattel, especially their handling of the DC license, but they aren’t always the worst people on the planet (just most of the time). One of the few places they don’t suck is their Fisher Price division, which handles their Imaginext brand. Imaginext offers a variety of different figures, meant to stand up to younger kids. In recent years, they’ve had a rather nice selection of DC heroes and villains, all offered in the line’s streamlined style. Today, I’ll be looking at the line’s take on Superman foe Brainiac.

THE FIGURE ITSELF

Imaginext doesn’t use the usual “Series” structure of most toylines; instead they have a variety of figures of differing price points and sizes, and they add a few new figures at a time as the line progresses.  Figures are usually sold either in two-packs with other figures or packed in with vehicles. However, Brainiac breaks from this tradition, being released by himself, as something of a deluxe figure. He was introduced into the line in 2014. The figure stands about 3 inches tall and he sports 8 points of articulation (the legs move as one, so just one point there). Brainiac is clearly inspired by his appearance in the DC Animated Universe shows, with a couple of small tweaks; they’ve given him bare arms and his skin is a much greener color. While I still have a soft spot for the classic short-shorts and white go-go boots combo of the 60s, I can’t argue with the choice of design. The DCAU look is definitely a strong one, and it’s probably the most prominent of the character’s appearances in recent years. I’m no expert on Imaginext figures, but Brainac appears to be an all-new sculpt. The figure offers a nice translation of the animated design, and the sculpt is definitely some solid work. Certain details, such as the figures face (apart from the nose), have been left blank on the sculpt. The paint has then been used to bridge the gaps. There are a few areas of slop, but the paint work is generally clean. The best work is definitely on the face, which is nice and clean, and very nicely depicts Brainiac’s cold, calculating mug. Accessories are a rarity among the Imaginext figures, but as a deluxe figure, Brainiac gets a set of robot tendrils, which can be clipped onto his back. While they seem a bit more Doctor Octopus than Brainiac, the character has sported such attachments before, and I certainly won’t complain about extra accessories.

THE ME HALF OF THE EQUATION

Brainiac was another gift from my parents, and he shows how much attention they pay to my never-ceasing ramblings about toys. While walking through Target a few months ago, I saw the figure and off-handedly mentioned that he was rather cool, and boom, here he is. He’s not the first Imaginext figure I’ve owned (I have a few of the Green Lantern-related ones), but, for whatever reason, he’s the first of them to interest me enough to actually open him up and play around with him. Brainiac is a really fun little figure, and he’s the kind of toy that there should be more of.

#0428: Mr. Freeze

Posted by Ethan Wilson in Reviews and tagged with , , ,

MR. FREEZE

BATMAN: THE ANIMATED SERIES (DC COLLECTIBLES)

DC Collectibles (formerly DC Direct) has made quite a splash in the collecting world with their new line of figures based on the much-loved Batman: The Animated Series. Toylines were something of a different beast at the time of the cartoon’s release. BTAS actually had one of the better lines of the time, but the figures were severely lacking in articulation and were often off model in order to facilitate action features and a smaller-scale toy budget. DC Collectibles’ line looks to be giving the characters the proper high quality treatment they deserve.

When it came to BTAS, there were few characters who benefited from the show’s new takes on the Bat-Rogues Gallery more than Mr. Freeze (formerly Mr. Zero). The show took the character from one-note villain to compelling and tragic anti-villain in the course of 22 minutes. So, it’s only fitting that Freeze would be one of the first four figures in DCC’s line.

THE FIGURE ITSELF

Mr. Freeze is part of DC Collectibles’ first series of Batman: The Animate Series line. The series ended up not really being a strict “series” as it were, as the four figures ended up being released separately. Freeze here was released along with Two-Face. He’s figure 03 in the line, following Batman’s 01 and Catwoman’s 02. The figure is just a hair over 6 inches tall (making him just a little taller than Batman, which is accurate) and he has 26 points of articulation. Freeze is based on his re-design from the New Adventures era of the show, which was actually one of the more radical re-designs. It’s a pretty sharp design, though it’s a little marred by the fact that it’s only cartoon appearance is the mediocre “Cold Comfort.” Still, the design is sharp, and starting with this one means they can hook people for the inevitable “Heart of Ice” version. Like Batman, Freeze sports an all-new sculpt. It’s a near perfect rendition of the design from the show. All of the details are smooth and symmetrical, and he really looks like the character would in three dimensions. They’ve done a great job working the articulation into the sculpt pretty seamlessly, allowing for a fair bit of movement without marring the design itself. The head dome is perfectly symmetrical and, it should be noted, removable. This allows this version of Freeze to be the first animated Mr. Freeze to sport neck articulation. How cool is that? For Batman, paint was the area where the figure really took a hit. While the paint on Freeze isn’t quite as good as it could be, it’s definitely an improvement. He still has a few spots of bleed over, and the flat black leads to some issues with scuffing. The blue used seems a bit off; I think there’s too much yellow in it. Of course it may just be that I’m used to the metallic blue from the Kenner figure. It’s hard to tell comparing this figure to the show. Freeze includes 6 hands (the pair of fists he comes wearing, a pair of relaxed hands, a gripping right hand, and a semi-gripping left hand), his trusty freeze gun, and a display stand with his character design sheet. They’ve already changed the nature of the clasp that holds the figure in place since the Batman figure, and I can’t say I’m a fan of the new design. It sticks out too far in the back. In addition to all that, Freeze also includes four mechanical spider-legs, which can be plugged into the bottom of his head, allowing for his…umm…head on spider-legs look. The legs are kind of a pain to get in, and the plastic is sort of soft, leading to some stress-marks (which you can see on mine). It’s a nice touch, and kind of essential to this version of the character (even if I don’t particularly care for the whole “he’s just a head now” thing).

 

THE ME HALF OF THE EQUATION

Mr. Freeze was another purchase from Cosmic Comix. Unlike Batman, I never needed any convincing on this guy. I’ve been on board for him since the day he was announced. Freeze was always my favorite of the animated rogues gallery, mostly due to “Heart of Ice” easily being my favorite episode of the show (getting to meet Michael Ansara when I was a kid may have contributed to that just a bit too). While I still want a BTAS Freeze, this one’s a really strong figure of a pretty great design. He looks fantastic next to Batman, and I can’t wait to get the rest of this series. It’s really fun!

#0424: Batman – Video Game

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BATMAN – VIDEO GAME

BATMAN ’89 (NECA)

The last several reviews highlighted some of the positives of Mattel’s hold of the DC license. So, hey, for a change, how about a discussion of how they totally suck? That’ll be a real change…

Mattel’s DC license has exclusivity built into it. This means that DC won’t license to anyone who would provide Mattel direct competition. The larger scale stuff is a bit more open, but anything under 12 inches is pretty much Mattel’s game. Given Mattel’s lackluster offerings as of late, this kinda sucks for DC fans.  For years, fans have wanted proper figures based on the 1989 Batman movie, specifically Michael Keaton’s take on the title character. However, when Mattel finally released a Keaton Batman, it was A)in 3 ¾ inch scale, rather than the preferred 6-7 inch range, and B) not very good. Enter NECA.

NECA, who are known for their killer movie sculpts, produced their own Keaton Batman, but due to the Mattel license, it had to be 18 inch scale. But, NECA is the king of making impossible things happen (Sigourney Weaver likeness FTW!), so they were working on a way to get out a 7 inch figure. As it turns out, while Mattel’s license covers all of the comics, the movies, and the cartoons, it only covers some of the video games. In particular, it doesn’t cover the 1989 NES game done to tie into the movie. So, by painting up their Keaton sculpt in those colors, they were golden. He was just sort of wonky colored…

(Incidentally, about a week after this figure was released, it was announced that NECA had worked out a deal to have a properly colored version released with the new Batman Blu-ray release. So, yeah.)

THE FIGURE ITSELF

Batman here was a special single release from NECA, but he follows the theme set by previous NES-style releases. Batman has the notoriety of being the first such figure to feature a new(ish) sculpt. I don’t usually discuss packaging, but it’s actually pretty cool here. It’s been done to look like the box for the original game, and it looks really cool. The only downside is that it’s shrink-wrapped, which means looking at the figure inside won’t happen until you’ve actually purchased it. This might up deterring some potential buyers, which is a bummer. The figure is a little over 7 inches tall and he features 25 points of articulation. So, you’ll notice up at the beginning there I referred to the sculpt as “new(ish).” This sculpt is essentially the same as the one used for NECA’s awesome 18 inch Keaton Bats. However, this is the first time it’s been seen in this scale, and it’s received a number of tweaks to make it work at the smaller size. Whatever its origins, it’s a really good sculpt. The coolest thing is that it’s not lots of straight pieces, it’s pieces on top of pieces, which gives it the appropriate amount of depth and layers. It really adds to the realism. What little can be seen of the Keaton likeness is spot on, and the figure’s proportions in general look to be a great representation of the actor. The sculpt is topped off with a cloth cape. It’s serviceable, though the hole for the head can show if you don’t have the figure posed properly. Paint is the one area where NECA sometimes has issues, but this figure has not been struck by any such issues. Overall, everything is very cleanly applied, and there aren’t any issues with slop or bleed over. The paint is also what makes the figure so distinctive. The colors are bold, and just wacky enough to make this figure the highlight of any Batman collection. Batman is armed with a grapple, a batarang, and two hands to hold them.

THE ME HALF OF THE EQUATION

This figure is my lone Black Friday purchase. This was the one. I got him from my local Toys R Us, late in the evening, in between rounds of rapid Christmas decorating. I’ve been waiting for this figure to be released, pretty much since it was announced. What’s funny is, I actually hadn’t gotten him yet when the proper colored one, which I thought I wanted more, was announced. But, after seeing both of them, I just can’t get as excited about that one as I am about this one. I just really like the colors, and the general uniqueness of this guy. Another winner from NECA!

#0423: Vigilante

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

VIGILANTE

DC UNIVERSE CLASSICS

DC Universe Classics may have ended up supplanting Kenner’s Super Powers as the “greatest DC toyline,” but the line owes a lot of its life to its predecessor. It’s been viewed by many as an update on the earlier line, and it’s worth noting that DCUC ended up releasing an update of every figure in Super Powers. But it seems that wasn’t enough. They decided to go further and release several of the characters who would have been featured in the proposed 4th Wave of the line. While some characters, such as Man-Bat and John Stewart Green Lantern, aren’t too surprising in a DC line in this day and age, one character in particular, Vigilante, seems rather out of place in a current line. The character was essentially DC’s answer to the Punisher, and he was fairly popular in the mid-80s, explaining why he was set to turn up in Super Powers. However, the character died in the final issue of his series, leading to him becoming largely forgotten. Still, he turned up in DCUC, joining the likes of Jemm, Kamandi, and Tyr.

THE FIGURE ITSELF

Vigilante was released in Series 8 of DC Universe Classics. Vigilante was the most obscure character in the series by far, which is really saying something in a series that contained Gentleman Ghost, Sergeant Steel, Mr. Terrific, and Dr. Fate. The figure is a little over 6 inches tall and features 25 points of articulation (yay ankle rockers!). He’s based on the character’s look from the 80s, which as far as I know, was his only look. The figure uses the mid-sized buck as a starting point, with a unique head, forearms, and left hand, as well as shins from Series 7’s Flash, and an add-on piece for his belt and holster. The medium buck is as good as ever, and it works very well for the character. The new pieces are all very well sculpted, though it’s odd that they only gave the figure one hand with a trigger finger when he’s meant to hold a gun in each hand. The head features a fully sculpted set of eyes under the visor, which is a cool touch, especially since it’s almost impossible to actually see them. Vigilante’s paint is very nicely handled. Everything is nice and clean. The colors are mostly vibrant and bold, though this figure shows the start of Mattel’s tendency to muddle the whites a little bit. Vigilante was well armed, with a mac-10 submachine gun, an m-16 assault rifle, and a revolver (special thanks to Tim for the help on those). In addition, the figure also included the left leg of Giganta, but my figure was bought loose and did not include this piece.

THE ME HALF OF THE EQUATION

When Series 8 was first announced and I heard Vigilante was in it, I assumed it would be the Greg Saunders version (who had appeared on Justice League Unlimited). When I found out this was the version of the character being released, I must admit I was a little let down. Still, it’s not a bad design, so I definitely wanted the figure. Sadly, the distribution issues hit their hardest with Series 8, and I never saw a single one of the figures on shelves.

Vigilante was the fourth and final DCUC figure I picked up at The House of Fun, which is an awesome store. Vigilante was one of the many, many loose DCUC figures the store had. I was really happy to find him. Odd choice of the character aside, this is a very well done figure. It’s a shame that Mattel couldn’t maintain the quality on this line.