Tag Archives: Hasbro

#1950: Erik Killmonger

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ERIK KILLMONGER

MARVEL LEGENDS (HASBRO)

“Seeking vengeance for his father’s exile from Wakanda, Erik Killmonger returns to challenge T’Challa for the right to the Wakandan throne.”

By far the most glaring omission from most of the Black Panther merch was primary antagonist Killmonger’s tactical gear.  Though it was his primary appearance for the film, the dark-panther-reflection design’s presence in the film’s final battle meant that it was the look that all the toy-makers went for.  So, for this very prominent look, all we had was a minimate.  Our first hint of the second Black Panther assortment was actually the tribal mask from this particular design, because Hasbro knew it was the look most people were wanting.  Now he’s finally here, so how did he fair?  Let’s find out!

THE FIGURE ITSELF

Killmonger is figure 2 in the M’Baku Series of Marvel Legends.  He pairs with yesterday’s Kinetic Black Panther as the double packs for this assortment.  Given the demand for this particular design, it was definitely a smart choice on Hasbro’s part.  The figure stands 6 1/2 inches tall and he has 30 points of articulation.  Killmonger is a rather sensible combination of old and new parts.  Obviously, the head is re-used from the two-pack version of Killmonger from last year, which is still one of Hasbro’s best likenesses from the MCU.  The legs are also re-used, this time from the Netflix Punisher figure.  They’re fairly basic combat attire, and again pretty nice pieces from the start.  With a new belt and thigh strap, as well as a new torso and arms, it all ends up looking new and unique, and the whole thing jibes together pretty well to make for a very strong, very spot-on recreation of Killmonger’s tactical appearance from the film.  Topping off the whole thing is a new mask piece, based on the tribal mask he steals in the film.  It fits well over Killmonger’s head, and stays in place surprisingly well.  It also fits nicely over a variety of other similarly sized head sculpts too, should you want to swap it around to other figures.  Killmonger’s paintwork is pretty decent work overall.  The face is printed, and therefore quite lifelike.  The uniform has a nice variety of colors, which makes him more eye-catching than his prior figures to be sure.  Both the camo on his legs and the brushed metal effect on his armor look pretty cool, and are done nice and convincingly.  I was a little bummed by the lack of paint on the belt actually on the figure, but with the add-on in place, this isn’t noticeable.  In addition to his removable mask, Killmonger includes a pistol and an assault rifle (both shared with the Punisher figure), as well as the head and staff of M’Baku.

THE ME HALF OF THE EQUATION

As with most other people, this Killmonger was very high on my want list, so I was happy to see him in this assortment, and was very much looking forward to him.  There’s not a whole lot to report on this guy.  He didn’t surprise me, because I was already expecting him to be pretty cool, and he certainly lived up to that.  As far as single figures go, I foresee him being the most popular in the set, because he’s a nice item all in his own right.

Like yesterday’s Panther figure, I got Killmonger from my friends at All Time Toys, and he’s still available here.  And, if you’re looking for other toys both old and new, please check out their website and their eBay storefront.

The Blaster In Question #0076: Nailbiter

Posted by Tim Marron in Nerf Reviews and tagged with , , , ,

NAILBITER

ZOMBIE STRIKE

nailbite1Nails. We all love them. Spikes what spike stuff together. Either that or the scratchy bits on the ends of your fingers, or even a band from the 90s that wants to do stuff like an animal. What does this all have to do with Nerf though? Well think about it, if you had to grab a makeshift weapon to use against zombies, wouldn’t you go for a nail gun?  No, not a cricket bat, and not a regular ball-peen hammer and sheer unflinching willpower, a nail gun. If for no other reason than it would be cool if it worked at all. Enter Nerf’s answer to this question that you all (for the sake of the review) answered wrong by picking more wisely, the Nailbiter. Improvised weaponry made from power tools? Let me show you its features. 

THE BLASTER ITSELF

nailbite2The Nailbiter was released in 2019 as part of the Zombie Strike line. It features a double-action trigger, like the Voidcaster from the Alien Menace series, but instead of just a smart AR, the Nailbiter uses an 8 round, vertical ratcheting clip, reminiscent of how, say, a nail gun would feed. I don’t know why Nerf seems to be on such a ratcheting clip kick lately with the Thunderhawk and Rukkus in addition, but it does seem like they’re slowly improving upon the system each time. People hated the Thunderhawk’s clip cuz it stuck out to the side and made it virtually impossible to store the blaster with space efficiency in mind. The Rukkus was a little better but you couldn’t access the whole clip from a single position for nailbite3reloading. Now with the Nailbiter, not only does the clip fit entirely within the silhouette of the blaster, but when it’s ratcheted all the way up, you can reload all 8 barrels. At this rate, in a few more iterations, it’ll hold 200 rounds and have 30% critical chance. Nerf, I’m serious, pick up the Warframe license. I’ll buy everything. Anyway, being a double-action blaster, pulling the trigger not only primes and fires in a single stroke, now it also advances the clip. This makes rapidly firing very easy, especially while dual weighing which I highly recommend if you can manage it. The Nailbiter is fairly large for a pistol. It was certainly bigger than I was expecting. On the plus side, that larger size means that it was big enough to include a stock and barrel attachment point. There’s also a rail on the bottom for… something, Australian scopes?  Who knows? The performance of the Nailbiter isn’t the most amazing in terms of range and power, but it’s definitely respectable in those regards. As I said earlier, the main draw for a blaster like this is rapid fire. Busting into your younger siblings’ room with two Nailbiters and opening fire is a sight they’ll not soon forget. The Nailbiter comes packaged with 8 Zombie Strike Elite darts. 

THE ME HALF OF THE EQUATION 

I found the Nailbiter entirely by chance at my local target since I was under the impression they hadn’t come out yet. Needless to say, I bought 2 and I regret nothing. As much fun as the Voidcaster was to dual wield for the vague Halo-esque feeling it inspired, the Nailbiter is functionally the better blaster, and having 16 rounds of semi-auto foam on tap is quite a feeling of its own. I recommend greatly

#1949: Black Panther

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BLACK PANTHER

MARVEL LEGENDS (HASBRO)

“With the safety of Earth threatened by the powerful titan, Thanos, Black Panther joins forces with the Avengers to protect the world from certain destruction.”

There was a time not that long ago when an MCU movie was lucky to get *any* 6-inch coverage.  Heck, Thor: The Dark World had literally none before the 10th Anniversary sets hit.  Black Panther was actually pretty fortunate in its first go, with four movie based Legends in its main assortment, plus a two-pack to augment.  However, that wasn’t enough for the fanbase, and so, for the first time, a solo MCU movie is getting a second series, a year after the movie no less.  I’ll be kicking things off with the main guy himself!

THE FIGURE ITSELF

Black Panther is the first figure in the M’Baku Series of Marvel Legends.  Though the whole series is based on Black Panther, Hasbro decided to mix things up when packaging the figures, so Panther’s packaging actually lists him as hailing from Infinity War, and he’s got a bio to match.  Since the Panther costume was the same between the two film’s, it’s a perfectly reasonable choice.  This guy is wearing the same costume as the last one, but this one shows it fully charged up with kinetic energy, so he’s all fancy and purple.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  His sculpt is, unsurprisingly, completely shared with the previous figure.  It is the same suit, after all.  While I have some slight reservations about the design, and its implementation (still not crazy about those shoulders), I will admit that it’s grown on me.  The new paint definitely helps in that respect.  In addition to the slight bit of silver accenting, this one also gets a bunch of funky metallic purple, which I feel better frames the sculpt, and helps to distract from some of the odder aspects of the articulation.  Panther is packed with an unmasked head and two sets of hands.  The hands are the same as the prior figure, but the head is an all-new piece.  The last head wasn’t stellar, and definitely work with the body, but this one actually gives us a pretty spot-on Chadwick Bosman as seen in his solo film, and it looks pretty solid when placed on the body.  Not bad!  In addition to the character-specific items, Panther is also packed with the right arm of M’Baku.

THE ME HALF OF THE EQUATION

I loved the Civil War Panther, and I was left sort of luke warm by the solo film release from last year.  When this assortment was first shown off, I was more focused on the other figures within it, so I wasn’t eagerly waiting for this guy.  But, since I wanted an M’Baku, I was in for him no matter my feelings on the figure itself.  I have to say, I was pleasantly surprised by this figure.  The new kinetic detailing gives him a much needed pop, and I really dig the unmasked head.  There are certainly worse figures to release.

As with most of my recent Legends purchases, Panther is from my friends at All Time Toys, and can be purchased here.  Or, if you’re looking for other toys both old and new, please check out their website and their eBay storefront.

#1946: Rio Durant

Posted by Ethan Wilson in Reviews and tagged with , , ,

RIO DURANT

SOLO: A STAR WARS STORY (HASBRO)

Though a minor part of the overall film, Tobias Beckett’s plucky pilot Rio Durant was an entertaining character with one of the niftiest modern Star Wars designs, making him a prime pick for just all of the toys ever.  Or, at the very least, two of the toys ever.  I’ve looked at one of his two figures, so today I’ll be looking at the other one.

THE FIGURE ITSELF

Rio is part of the fourth series of Hasbro’s tie-in line for Solo.  As I’ve noted in my last two reviews, this assortment proved to be the one with the most actual Solo characters featured within it, making Rio a natural choice for the line-up, especially with Beckett and Val shipping right alongside him.  The figure stands 3 inches tall and with 12 points of articulation, he’s one of the best articulated basic 3 3/4-inch figures we’ve gotten in quite a while.  As with his larger counterpart, it’s those extra limbs that rally give him the advantage.  Rio’s sculpt is, unsurprisingly, an all-new affair, and it’s by far the best of the three I’ve looked at from this assortment.  Obviously, it’s slightly stepped down from the Black Series release, but not quite as much as you might think.  It’s an accurate rendition of his model from the film, and it includes some of the best detail work you can find at this scale.  While he’s slightly pre-posed, it’s just enough to give him a little bit of extra character, without proving itself too limiting.  The arms in particular are cleverly posed to work with the articulation and offer up a couple of acceptable poses for each of them.  Rio’s paintwork is fairly basic, but the application is clean, and all of the important details are there.  On top of that, he maintains the bright, eye-catching colors of his larger figure, and is just generally a nice figure to look at.  While the larger Rio includes two different blasters, this one instead only carries the smaller one, which, given the lower price point isn’t terrible.  It can be stowed in his holster on his belt, or held in any of his four hands, so you’ve definitely got some display options cut out for you.

THE ME HALF OF THE EQUATION

I did *not* find Rio at the same Walmart as Beckett and Val.  However, after having found them, and knowing that they were being clearanced, I made a point to swing by another Walmart on my way home, and I was able to grab a discounted Rio there.  I thought this guy might be another situation like with Val, where getting the Black Series figure first kind of left me feeling lukewarm about the basic release, but I have to say, Rio is just a really, really nice figure, and one of the best things to come out of this basic line.  Sure, the larger figure is more poseable and has the extra weapon, but this guy is absolutely no slouch in his own right, and the smaller scale means he’s a pilot who will actually be able to pilot things, even if we don’t actually have the ship he flies in the movie.

#1945: Val (Mimiban)

Posted by Ethan Wilson in Reviews and tagged with , , ,

VAL (MIMIBAN)

SOLO: A STAR WARS STORY (HASBRO)

Conspicuously absent from the early product for Solo were figures of Tobias Beckett’s distinctive crew of smugglers from the beginning of the film.  Though their roles weren’t huge, both Thandie Newton and Jon Favreau delivered really strong performances.  Newton in particular was praised by the film’s writer as being “too good for her role”, and famously wore a dress bearing images of action figures of all of the Star Wars-verse’s black characters (I believe from her own personal collection, though I may be misremembering that) to the film’s red carpet premiere.  I hope she gets the chance to add her own figure to that selection!

THE FIGURE ITSELF

Val (Mimiban) is part of the fourth series of the Solo line, which happens to be most actually Solo-themed assortment, and likely will prove the most difficult assortment to find in the long run.  What’s interesting about this Val is that, though she’s wearing the same outfit as her 6-inch counterpart, they’re listed as being from two different locals.  This one is billed as being from Mimiban, which isn’t quite accurate, since she was wearing an Imperial disguise while there.  I mean, she does *technically* wear this gear right as they’re leaving Mimiban, but it seems odd to list this one as specifically her “Mimiban” appearance, especially if there’s any chance at releasing versions of Beckett’s crew in their Imperial get-ups (please?).  The figure stands about 3 1/2 inches tall and she has 7 points of articulation.  Like a good number of the Solo figures, she has wrist joints included, which certainly make themselves handy.  She also has a much easier time keeping standing than her partner Tobias, which I’m certainly counting as a plus.  Her sculpt is a decent enough offering.  I’d rank it above Beckett in terms of detailing and accuracy, though I can’t say the likeness is one of their best.  Black Series Val was spot-on, but this one seems a little off.  Still, she’s certainly passable.  Val’s paintwork is, like the sculpt, definitely serviceable.  There are some slightly un-even spots, but for the scale, she’s really not bad.  The figure is packed only with a single blaster, just like her larger counterpart.  However, at the lower price and smaller scale, this is less of an issue.

THE ME HALF OF THE EQUATION

I grabbed Val at the same time as I grabbed Beckett, largely due to that whole thing with Walmart clearancing them out.  Admittedly, she’s a better figure than he is, but she had the misfortune of being added to my collection just a few days after I got the much more technically impressive Black Series release, which did sort of steal this one’s thunder.

#1944: Tobias Beckett

Posted by Ethan Wilson in Reviews and tagged with , , ,

TOBIAS BECKETT

SOLO: A STAR WARS (HASBRO)

Hey, whoa, remember yesterday, when I reviewed a figure of a character played by Woody Harrelson?  Well, if you liked that, you’re in luck, because I’m totally going to be doing that again today.  What sort of crazy person would put these things back to back?  This sort of a crazy person, that’s who!  Yesterday’s review looked at one of Harrelson’s earliest on-screen roles.  Today, we’re jumping forward to 2018, with his turn as Han’s mentor Tobias Beckett in Solo.

THE FIGURE ITSELF

Tobias Beckett was released in Series 4 of the Solo line from Hasbro.  As a pretty major player in the film, it’s a bit surprising it took so long to get him, but at least he actually showed up at (some) retail.  Beckett is based on his main smuggler’s appearance from the film, same as his 6-inch figure.  The figure stands 4 inches tall and has 9 points of articulation.  A number of the Solo figures added wrist joints, and Beckett furthers this by also adding swivels at the tops of the boots.  Despite these extra joints, I still found Beckett to be almost impossible to keep standing. I’m not sure why he’s so different from others in the line, but it does appear that the feet are angled a little too far back.  It’s possible this issue is limited to my figure, but it’s still frustrating nonetheless.  The figure’s sculpt is decent enough, though I don’t find it to be quite as strong as the rest of the main characters. The detailing is generally a little softer, and I don’t think there’s really much of Woody Harrelson in the likeness on the head.  It’s certainly not as good as the spot-on likeness of his larger counterpart.  Also not quite as strong as the larger figure?  The paint.  Obviously, there’s less of a canvas to work with on the smaller figure, so less detail is expected, and for the body, that’s not so bad.  It’s really the head that gets the worst of it, because they’ve transformed Harrelson’s scruff into more of a Van Dyke looking thing.  It just makes the whole figure look rather off.  Beckett is packed with his dual blaster pistols, which he can hold or store in his working holsters.

THE ME HALF OF THE EQUATION

Beckett’s a figure a very nearly missed at retail.  None of the stores in my area have carried anything past the second wave of Solo product, and even that was scarce.  I ended up finding this one at the Walmart near where my family was vacationing over the winter holiday, just as they put all of their Star Wars stuff on clearance, at which point pretty much every figure they had disappeared overnight.  If you really just want a Beckett, the Black Series figure is the better offering, and may just be easier to find in the long-run.  Had I not found this guy when I did, I don’t know he would have warranted tracking down after the fact.

The Blaster In Question #0075: Shadow ICS-6

Posted by Tim Marron in Nerf Reviews and tagged with , , , , ,

BlasterInQuestion1

SHADOW ICS-6

MODULUS (GHOST OPS)

So it turns out I’m not dead and I’m still on this site. Sorry. But speaking of dead things, ghosts, like the Modulus Ghost Ops line of blasters, and yes it is a line now.  You only need 2 points to make a line and we now have the second point. Also apparently not dead is the old style of giving Nerf blasters alphanumeric designations along with their name, so today I’ll be looking at the Shadow ICS-6. 

THE BLASTER ITSELF

The Shadow was released in 2019 as the second only blaster entry into the Ghost Ops subset of the Modulus line. It uses the internal magazine system we’ve seen on blasters like the Magnus and Rey/Han blasters. Functionally, however, it has a slightly different loading system which allows the magazine to be loaded when the blaster is unprimed. Additionally, other external features like copious accessory rails, a barrel attachment point and stock attachment point separate the Shadow from other internal magazine type blasters. Perhaps most notable about the Shadow, somewhat counterintuitively, is its light up feature, much like the Evader that came before it.  The secondary trigger on the grip activates the lights, which create a pretty cool effect especially in low light. I don’t know if it’s just my blaster, but one of the lights is placed in just the right position to shine right into my face when I try to aim the blaster with the lights on, so that’s a little irksome but by no means a deal breaker. Like the Evader, the Shadow has a tiny little switch on the front end that activates one more light inside the barrel when an extension is put on. This won’t affect 95% of barrels out there, but any of the Ghost Ops barrels light up like fiber optics. Performance-wise, the Shadow does more or less how you’d expect a modern Nerf blaster. Shots fly reasonably far and hit equally as hard, maybe not as much as a full-sized blaster, but it is a pistol, kind of. Now we come to my main complaint about the Shadow. When you take into account that it is a 6 shot pistol, it’s huge, a detail not helped by the entirely clear body. This means you can see all of the dead space inside the blaster, which makes the size all the more baffling. I guess it’s not a huge issue, but it bugs me. I guess the extra size does make it just that little bit more intimidating when you bust into your younger sibling’s room and double tap them in the head like a Nerf hitman. The Shadow ICS-6 comes packaged with a barrel attachment and 6 Modulus Elite darts. The light up feature requires 3 AAA batteries but is not needed to operate the blaster otherwise. 

THE ME HALF OF THE EQUATION 

I want to be clear on one thing, no pun intended. I really like the Shadow as a blaster. That being said, my knack for picking out blasters that not many other people like seems to be in effect again. From what I’ve been able to find, not many people are really thrilled with the Shadow and I can’t quite understand why. It’s a decent blaster with just a few things that are less than optimal.

#1936: Poe Dameron & BB-8

Posted by Ethan Wilson in Reviews and tagged with , , , ,

POE DAMERON & BB-8

STAR WARS: RESISTANCE (HASBRO)

“A hotshot X-wing pilot for the Resistance, Poe Dameron is a natural leader who keeps an eye on the crew of the Colossus.  When Poe sets out on his own missions, he leaves behind BB-8, a rolling BB unit whose spherical shell is packed with useful tools and computer interface equipment, to work alongside Kaz and the rest of the crew.”

With the somewhat longer hiatus than usual between Solo and Episode IX, plus the ending of Rebels, the market was in need of some other form of Star Wars media to tide us all over.  Enter Star Wars Resistance.  Set prior to The Force Awakens, it follows a group of Resistance pilots, and…uhh, well that’s all I know.  I haven’t actually seen any of it yet.  I *have* seen the toys, or at least some of them, including my main man Poe Dameron, who I’ll be taking a look at today.

THE FIGURE ITSELF

Poe Dameron and BB-8 are part of the launch for the Star Wars Resistance toyline.  They’re a slightly more deluxe offering, which appears to be replacing the two-packs we got for Last Jedi and Solo.  It gives us Poe in his X-Wing pilot gear, which appears to be (mostly) the same as it is in the films.  The figure stands 3 3/4 inches tall and has 5 points of articulation. I was a little saddened to see him only sporting the basic 5 joints, after the Last Jedi pilot release added in wrist swivels, but there are enough figures without those joints that it’s not a huge surprise.  Poe is sporting an all-new sculpt, depicting his animated design.  Obviously, it’s not going to fit in with your basic movie figures, but he’s fairly similar to the Rebels figures we’ve been getting the last few years.  He’s long and lanky, and the detail work is more on the reserved side.  His head sculpt, despite being based on an animated incarnation, may very well be the best Poe we’ve seen to date, at least from Hasbro.  He’s certainly more of a caricature than other figures, and it’s still not a perfect match, but it’s certainly better than I was expecting.  Poe’s paintwork is pretty basic, befitting his animated nature.  The application is pretty clean, and the face seems to have a bit more detail than I’m used to seeing on the basic figures.  I’m wondering if this is a change in how the paint is done, similar to the printed faces for Black Series and Legends.  I wouldn’t mind seeing something like this on future figures.  Poe is packed with his helmet (in the more generic blue and white, rather than his black squadron leader coloring), a blaster pistol, and, of course, BB-8.  BB is about an inch tall and has the usual ball-jointed head.  Unlike other small-scale BBs, this one doesn’t have the flattened out section at the bottom; he’s a proper sphere like the Black Series release.

THE ME HALF OF THE EQUATION

So, I *tried* to buy a Poe a lot earlier than I succeeded.  While grabbing a few other things at Target, I saw him there, and thought “hey, there’s a Poe figure I don’t have.”  Little did I know he was still street dated at the time, so I wasn’t able to purchase him.  A week later, I was at the same Target, and all of the Resistance figures that had been there were gone.  No Poe for me.  Then I spotted him stashed back behind another item, and grabbed him, though I still wasn’t sure I’d actually be able to buy him.  Well, as you can see, I was.  Yay.  He’s a fun figure.  Nothing amazing, or Earth-shattering, but he’s nice.

#1933: Optimus Prime

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

OPTIMUS PRIME

TRANSFORMERS WAR FOR CYBERTRON: SIEGE (HASBRO)

Oh wow, what’s this?  Another Transformers review?  On this little old site?  But it’s only been a day since the last one!  Is that enough of a waiting period?  I wouldn’t want people to think I might be some sort of *shudder* Transformers fan…

Well, if I’m gonna commit to this potential Transformers fan thing, I’ve got one pretty big hurdle I’m gonna need to overcome.  You see, in my over two decades of collecting, I have never once owned a single figure of the most definitive Transformer of all time, Optimus Prime.  Yeah, I don’t know how that happened either.  Well, I mean, I might; it could possibly be related to me exclusively buying figures of Soudwave.  That might have done it.  Whatever the case, I’m striving to make up for this horrible gaping hole in my collection.  So, without further ado, here’s Optimus Prime!

THE FIGURE ITSELF

Optimus is part of the first wave of Voyager Class releases for Hasbro’s new War For Cybertron: Siege line, where he was paired off with his Decepticon equivalent Megatron.  In his robot mode, Optimus stands 6 1/2 inches tall and he has 26 practical points of articulation.  This figure is sporting a brand new sculpt, patterned on the original G1 Optimus, or at least a very idealized version of it.  This Optimus aims to be the figure Transformers fans *remember* playing with, rather than the one the actually did…unless your me, and this figure actually *is* the figure you were playing with.  That’s not the point, though.  I was quite impressed by the implementation of the articulation on this figure; it’s easily on par with Legends and the like, at least in terms of range.  All of the joints are free and clear to do as they please, and a lot of them are very cleverly hidden on this guy.  His sculpt is boxy, and very full of small detail work, but not so much that it ruins that nice clean-lined feel of the classic Optimus design.  I particularly dig the rivets on the upper arms, as well as the transparent windows of the cab.  And, though there is no separate Matrix of Leadership included with this figure (thought he shape of one is hinted behind the windows when he’s in vehicle mode), the torso is clearly designed with the possibility of housing one in mind. Part of the slickness of this particular figure’s robot mode comes from how it handles the kibble on the back.  The remnants of his truck cab fold up into a rather compact and manageable back pack piece, and the headlights on the arms, though a bit more noticeable, still can be passed off as forearm guards.  Optimus’s alt-mode is a smoke-stack-sporting truck reminiscent of his original incarnation’s freight truck.  It’s been slightly Cybertron-ized, since I guess these figures are technically supposed to be pre-Earth, but it’s still very clear where the influence lies.  I find the cab of the truck in particular to be the most convincing piece.  The back looks a little more like it’s just his legs flipped around, since that’s kinda what it is and all.  I will say, that although there are technically more steps to the process of transforming this guy, I did find it as a whole a much easier experience, and am much more willing to swap Prime back and forth on a frequent basis.  He’s still going to be staying a robot most of the time, of course, but I see this one being a figure I pick up and fiddle with more frequently.  Optimus is packed with two accessories: a blaster and an axe.  The blaster is pretty straight-forward piece, and can be held in his hand in robot mode, or mounted in one of the handful of 5mm ports when in truck mode.  The axe is slightly more complex, with a transformation of its own.  Out of the the package, it’s an axe, but you can also fold it up into a shield, which, like the blaster, can be mounted in one of the 5mm ports.

THE ME HALF OF THE EQUATION

I blame Max.  No, really, it’s all Max’s fault.  I wasn’t into Transformers, I swear.  Okay, so, it’s a little bit Max’s fault, and a little bit Bumblebee‘s fault.  Max was really up-selling this figure to me, and I was trying to hold out.  And then I saw Bumblebee, with it’s classically-styled Optimus in all his classically-styled glory, and I thought “man, I need an Optimus.”  I was at All Time, I’d just traded in a bunch of stuff for store credit, they only had one of this guy in stock, and I was sort of having a bad day, so I just sort of grabbed him.  I don’t regret that choice for a second, because man is this a cool toy.  Like, even overlooking the transforming feature, he’s just a strong base figure, and a ton of fun to mess around with.  The only downside is that now I really want a bunch more.

As mentioned above, I picked this guy up from my friends at All Time Toys.  The first wave of Voyager Class Siege figures have sold out, but the Deluxe figures are still in-stock, and they’ll be carrying all of the new releases as they come.  If you’re looking for Transformers, or other toys both old and new, please check out their website and their eBay storefront.

#1932: Bumblebee

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BUMBLEBEE

TRANSFORMERS: STUDIO SERIES (HASBRO)

You know what was a really good movie?  Bumblebee.  As someone who couldn’t make it through more than one of the prior live action Transformers films, I was quite pleasantly surprised by how thoroughly enjoyable a movie Bumblebee turned out to be.  It was fun, it was coherent, it had a cool ’80s backdrop, and it had a runtime that didn’t urge me to say goodbye to my loved ones before departing for the theatre.  It also revisited its title character’s design, returning him to the car he had been at the beginning, a VW Beetle, and by extension removing the perceived need to make him “cooler” that had been added by prior films.  And what do you know, all that change actually prompted me to buy a toy.  Please, try to contain your shock and awe.

THE FIGURE ITSELF

Bumblebee is one of the Deluxe Class releases from Hasbro’s Transformers: Studio Series line, which is a whole line devoted to producing slightly more movie accurate figures from all six movies in the series.  He’s figure 18 in the line, and started showing up in October/November of last year.  In robot mode (ie, the mode he’s in right out of the box), he stands 5 1/4 inches tall and has 19 practical points of articulation.  Bee’s robot form is represented pretty well here.  There were clearly some changes between when the figure was designed and when the final movie arrived in theaters, as well as some additional changes necessitated by the figure’s actual transforming features.  On a whole, the figure is a little boxier, and not quite as polished as the Bee of the film, but he’s certainly recognizable, and he keeps the important changes from this design compared to earlier ones.  The implementation of the articulation is solid for the scale and the concept.  I might have liked some side to side movement on the wrists, but the hinge at least provides *some* movement.  I was quite happy with the movement on the head; that balljoint has a nice range to it.  Bee’s alt-mode is, of course, the Volkswagon Beetle, a major selling point, given how finicky Volkswagon is with their products.  The car mode is pretty decently handled.  The Volkswagon design is nicely rendered, and well captured, and there aren’t too many consolations that have to be made to make it work.  The transformation between the two modes is a little tricky, at least for me, a Transformers-pleb.  The biggest trick is folding up the hood and roof of the car behind him for the robo-mode.  It felt a bit like I was going to break it getting it in place there.  Similarly, getting everything locked into place for the car mode can be a little nerve wracking.  Ultimately, I was looking more for a cool robot figure that has the potential to turn into the car, not a car that can sometimes be a robot, so I’m okay with leaving him in the robot mode most of the time.  Bumblebee is packed with a few extras, all meant to accent the robot mode.  There’s the battle-mode faceplate, which swaps out for the regular one.  The first swap was a little tricky, but they generally go back and forth with relative ease.  There are also two weapon attachments: a cannon arm that swaps out for his right forearm, and a blade attachment, which can be plugged into either of the arms.  All this allows for a nice coverage of Bumblebee’s looks from the movie.  There’s also a cardboard backdrop, for them that want such things (I’ve never been much into them myself).

THE ME HALF OF THE EQUATION

I eyed this guy up a few times before seeing the movie, because I did just really like the design, but held off because I was trying not to get hooked on Transformers.  I really, really was.  But then, like a fool, I saw the movie.  And I really liked the movie.  So, then I *had* to have a Bumblebee.  And maybe some others, but more on that later.  Fortunately for me, my friends at All Time Toys were happy to set me up with one.  I’ve seen some negative opinions of this figure, but I myself am pretty darn happy with him.  He’s a fun little toy.