Tag Archives: Marvel Legends

#1114: Iron Fist

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

IRON FIST

MARVEL LEGENDS

ironfisthas1

Hasbro seems to have a lot of trouble placing Iron Fist.  Why?  Well, the guy’s now gotten two different figures from their re-branded Marvel Legends line, and in both cases, he was the one figure in the set whose connection to the overall theme was tenuous at best.  I’m not complaining, mind you.  I like me some Iron Fist.  And, since he’s got his own Netflix show on the horizon, it’s not exactly a huge surprise that Hasbro opted to get out another figure of him sooner rather than later.  Now, if someone can explain to me what he’s doing in a Dr Strange set, we should be all good to go!

THE FIGURE ITSELF

ironfisthas3Iron Fist (who, like so many figures in this line, gets that “Marvel’s” possessive added to his name, just so you don’t mistake him for someone else’s Iron Fist) is part of the recent Dr. Strange-themed Dormammu Series of Marvel Legends, where he’s figure 8 in the lineup.  He’s seen here in the green jump-suited look he had during Matt Fraction and Ed Brubaker’s defining run on the character.  It’s one of those modern updates I can get behind, where it takes all of the important elements of the character, but also removes some of the sillier, more dated bits, like the huge collar, deep, deep, (deep!) neckline, and slippers.  It’s also nice to see it here because, despite being the character’s main look during a very popular run on his series and for some time after, it hadn’t yet gotten the Legends treatment (it got the Marvel Universe treatment, but the less said about that, the better).  The figure is about 6 1/4 inches tall and he has 34 points of articulation.  Iron Fist is built on the Pizza Spidey body, a choice that surprised a few people.  Generally, Iron Fist is depicted a little larger than this body (it’s been a story point that he can convincingly double for Daredevil, who was on the Bucky Cap body).  That being said, this body allows him a wider range of posability, and it’s not too far removed from the build David Aja gave him when he first started wearing this costume.  Danny gets a new head sculpt and sash, which are similar to those seen on the prior Iron Fist, but notably improved in a few ways.  The head in particular is less boxy and smooth than the last one, which is a definite step up.  He also gets a new set of forearms, with two sets of swappable hands.  Sadly, he doesn’t have the huge selection of hand poses that the last figure possessed, but he does get a pair of translucent fists demonstrating his power, as well as a pair in thick wraps.  I prefer the wrapped look myself, but both sets are pretty cool.  Iron Fist’s paintwork is pretty solid.  The colors match up pretty well with those seen in Immortal Iron Fist, especially the slightly muted green.  In addition, everything is pretty solid in terms of application, and the wrapped fists even have a nice wash to bring out more of the details.  In addition to the previously mentioned swappable hands, Iron Fist also includes a pair of flame effect pieces, which can easily fit over either set of hands, as well as the shoulder pads of Dormammu.

THE ME HALF OF THE EQUATION

I wasn’t 100% sold on this figure, since I already had the Allfather Series version of the character.  When I found Mordo at the store, I also found this guy, but I had planned on leaving him there for a later time.  Of course, Super Awesome Girlfriend wouldn’t stand for this and ended up buying him for me anyway.  I’m actually really happy I got this guy.  In hindsight, I’ve realized that the last Iron Fist was already pretty dated when he came out and has become even more so in the last year and a half.  Plus, this costume is more linked with the character for me, and the new choice of body is pretty solid.  Now, if only we could get a decent Luke Cage to go with him…

*Want an Iron Fist figure of your own?  He’s currently in-stock with our sponsors over at All Time Toys!  Click here to check him out!

ironfisthas4

#1113: Karl Mordo

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

KARL MORDO

MARVEL LEGENDS

karlmordo1

Last week, Marvel Studios’ latest film Dr, Strange hit theaters. Like Guardians of the Galaxy and Ant-Man before it, it was viewed as a slightly risky move for Marvel, since it would be rather different than prior films in style and “Dr. Strange” isn’t exactly a household name.  Also like Guardians and Ant-Man, the gamble seems to have paid off.  I saw Dr. Strange Thursday night and very much enjoyed it, from start to finish.  One of the standout parts of the film for me was Chiwetel Ejiofor’s turn as longtime Dr Strange foe Baron Mordo.  I’ve like Ejiofor since I saw him in Serenity (okay,fine, since I saw him in Love Actually.  Richard Curtis is my dude).  The guy is good at taking antagonistic roles and making them very likeable, and there’s a lot of that going on with his portrayal of Karl Mordo.   

THE FIGURE ITSELF

karlmordo2Mordo was lucky enough to be one of the three movie-based figures in the recent Dormammu Series of Marvel Legends (in fact, he’s the only non-Strange figure in the three).  The figure stands about 6 1/4 inches tall and he has 29 points of articulation. In the comics, Mordo just sports a green bodysuit and a cape (he’s also bearded white guy who’s nothing more than a two-dimensional card-carrying villain, but that’s another matter).  His movie design mixes things up a bit, presumably to make him not only fit in a bit better with the rest of the movie’s designs, but also to make him a little more visually interesting.  The design is still definitely in keeping with Mordo’s comics look, and the comic incarnation certainly wouldn’t look out of place wearing something like this.  For the figure, he’s lacking his larger over cloak, which sort of replaces the cape stylistically.  Though it’s cool in the movie, it’s also only really present for a few short scenes, so Hasbro’s decision to go with this look (which goes with their MCU Dr. Strange, being the look Mordo has during the film’s climax) is certainly sensible.  The figure gets an all-new sculpt, which does a fairly decent job capturing Mordo’s onscreen design.  The details on his robes could maybe be a little sharper, but they aren’t bad at all.  I did notice one small inaccuracy on the belt: the small brown leather belt should really be the outermost belt, but on the figure, the it’s under his sash.  It’s entirely possible it was originally assembled as on the figure and Ejiofor just wore it slightly differently when actually filming.  The figure’s head sculpt presents a passable Ejiofor likeness.  It’s not spot on; certain angles are better than others.  It has some very nice detail work regardless.  The one thing that really jumped out at me was the lack of Ejiofor’s trademark scars on his forehead.  They were particularly noticeable in his performance as Mordo (to me, anyway), so their omission is just a slight letdown.  Mordo’s paintwork is pretty good for a Hasbro figure.  The colors match up pretty well with his on-screen counterpart, though he could really stand to have a few more variances of green on the robes.  They look a little bland as is.  This is a figure that would be greatly aided by adding just a little bit of accent work, just to make him pop a little more.  Mordo is packed with what I’m assuming is supposed to be the staff of the Living Tribunal, which is the relic that chose Mordo and is his primary weapon for the film.  That being said, the included piece really doesn’t look like the staff from the film at all.  It’s far too long and lacks the notches and other details seen on Mordo’s staff, as well as the strap Mordo uses to carry it on his back.  Like the issue with the belt, it’s possible Mordo was set to use a different prop initially and this changed during filming, but it’s still a little annoying.  Mordo is also included the right leg of Dormammu, as well as new versions of the flaming skulls included with the SDCC Dormammu, but this time in green and blue, which looks really cool!

THE ME HALF OF THE EQUATION

As I noted in the opening, I’ve been a fan of Ejiofor’s work for a little while, so I was very excited to hear he would be in Dr. Strange, and intrigued by the new take on Mordo that the film was presenting.  He was easily the figure I was most anticipating from this particular set.  I ended up finding him at a nearby Walmart (like a day before the Hurricane hit, actually).  I loved the character in the movie, and while the figure isn’t perfect, he’s still a very good representation of the guy.

*Want a Mordo figure of your own?  He’s currently in-stock with our sponsors over at All Time Toys!  Click here to check him out!

karlmordo3

#1109: Daredevil

Posted by Ethan Wilson in Reviews and tagged with , , ,

DAREDEVIL

MARVEL LEGENDS (3.75)

ddyellow375a

Given how long he wore it, Daredevil’s yellow costume is rather disproportionally popular.  I guess it’s just different enough that it stands out.  It’s also a pretty easy variant for toy companies to release, what with using the same selection of parts as the normal Daredevil costume and all, so there’s lots of incentive to make figures of the design.  So far, its shown up in just about every major scale of Marvel figure, including 3 3/4-inch, which I’ll be looking at today.

THE FIGURE ITSELF

ddyellow375bDaredevil was released in the second series of the smaller-scale Marvel Legends line.  He’s the second smaller-scale Yellow Daredevil figure we’ve gotten, but the last one was built on one the less than stellar bodies that Hasbro used to kick off Marvel Universe, so an update was much needed.  The figure stands about 4 inches tall and he has 28 points of articulation.  Structurally, he’s the same as the Daredevil vs Bullseye two-pack version of Daredevil from the  Marvel Universe line.  Since that figure’s tooling was already paid for, it means this guy gets to keep all of the articulation, giving him about 10 points more than his compatriots from this same series.  Like with the Marvel Legends Daredevil I looked at a few months back, the sculpt here seems a little too well-built for an early in his career Matt Murdock, but it’s not like it’s a bad sculpt or anything.  In fact, he was probably one of the better sculpted Marvel Universe figures.  Paint is the key part here, and it works alright.  The color scheme is pretty much the same as we saw on the larger figure this year.  The brown isn’t my favorite thing ever (I prefer black with red highlights), but it looks decent enough, and everything looks pretty sharp.  The logo on the chest is still a little on the large side, but it’s not quite as bad as on the larger figure.  Daredevil is packed with his billy clubs, which are the same as those included with all the prior small-scale Daredevils.  They work pretty well, and seem a bit less rubbery this time.

THE ME HALF OF THE EQUATION

Daredevil was picked up for me at the same time as Rage, mostly to keep my Yellow Daredevil collection going.  There’s not really much new here, but I liked the basic version of this figure, and by extension I like this one.  There’s certainly nothing wrong with a simple repaint when it’s appropriate, especially when it means I get another Yellow Daredevil!

#1108: Rage

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MARVEL’S RAGE

MARVEL LEGENDS SERIES (3.75)

rage1

There are a lot of rather obscure characters in comics.  It sort of comes with the territory, since you can’t expect every single character who appears in a monthly installment of serialized fiction to be beloved by the masses.  What’s interesting with some of these characters is how close to high profile they get.  Take today’s entry, Rage, for instance.  Rage was a member of the Avengers, for over a year no-less, but most people would be completely unable to ID the guy if they saw him.  He did get something of a cult following from his stint with the New Warriors, and now he’s even got an action figure, so maybe things are looking up for him!

THE FIGURE ITSELF

rage2Rage is from the second series of the 3 3/4 inch scale Marvel Legends line by Hasbro.  Thanks to Living Laser’s presence in the set, he may not even be the most obscure character from the series, which is kinda saying something.  The figure stands a little over 4 inches tall and he has 19 points of articulation.  The reduced articulation of this line is something I’ve addressed a few times, and mostly I don’t find it ruins or holds back the figures too badly.  However, Rage seems far stiffer in terms of range than prior figures, and on top of that, his head can’t actually turn more than a few degrees before popping off, which is really annoying.  Rage is seen here in his original costume.  It’s not a particularly attractive design, but let me tell you, he’s had far, far worse during his career.  Rage is built on one of the larger male bodies, with character specific pieces for the head, lower arms, and lower legs, and add-ons for his jacket and belt.  The jacket and belt are definitely very strong pieces, and the hands and feet are pretty good too.  Something about the body and the head seems a little too smooth for me.  Like he’s unfinished or something.  It’s hard to say, but it really feels evident on the torso.  It’s on par with a lot of the other stuff from this particular line, so I can’t really say he’s an outlier in that regard, but I also can’t say that’s much of a point in his favor.  I just sort of wish the whole sculpt matched the quality on the vest.  Rage’s paintwork is generally pretty straight forward.  It’s mostly just solid color work, which works fine for the character.  There’s a little bit of accenting on the vest and pants, which goes a long way, and gives him some much needed pop.  Rage has no accessories, but I can’t really think of what you’d give him anyway.

THE ME HALF OF THE EQUATION

Rage here was picked up for me by totally rad brother, who got him for me while I was away with Super Awesome Girlfriend and her family.  Back when the Marvel Universe line was in full-swing, I put a lot of effort into tracking down as many Avengers in that scale as I could get ahold of, so from that perspective, Rage is pretty cool to finally have.  Could he be better? Probably, but this is quite possibly the only Rage we’re ever going to see, and he’s far from the worst thing ever.

#1077: Deadpool

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DEADPOOL

MARVEL LEGENDS SERIES

deadpoolhas2

Just a few weeks ago, I took a look at most of the latest set of X-Men-themed Marvel Legends.  I got all of the figures necessary to complete the build-a-figure, but there was still one more figure I didn’t have at the time, so he didn’t get reviewed.  But now I’ve got the figure, so why not give it a review?

It’s worth noting that I run hot and cold with Deadpool.  I was never really into him in the ‘90s, since he was still sort of being formed at the time.  I had a few of his figures from the old X-Force line, and they were cool and all.  I was actually pretty into the character around the time of Ultimate Alliance (where he was one of my favorite characters to play), and picked up a couple of his comic book runs over the years. Then he sort of did the Wolverine thing and became really really popular really really fast, and certain parts of the character got more exaggerated, and they happened to be the parts I was a little less fond of.  But, you can’t deny he’s a popular guy, and his latest Legend seems somewhat over due.

THE FIGURE ITSELF

deadpoolhas3Deadpool is the last figure in the Juggernaut series of Marvel Legends. He’s the only figure in the set not to include a piece of the unstoppable guy, which was probably a good idea, since it allows Deadpool fans to buy just the one figure without getting the random piece and it allows fans wanting to complete Juggernaut to not have to worry about tracking down what is undoubtedly the most popular figure in the series.  Deadpool has sported more or less the same design for most of his 25-year career, but there have been a number of minor changes here and there over the years.  This figure is based on the character’s most recent Marvel Now! look.  It’s a pretty good design, offering fans without prior Deadpool figures a basic Deadpool, while also offering something new for the older collectors.  The figure is 6 1/4 inches tall and he has 32 deadpoolhas4points of articulation.  Wade is built on the Bucky Cap body, which is a good fit for him.  He has a unique head, forearms, hands, shins and feet, as well as add-ons for his harness, belt, and thigh holster.  The new pieces blend well with the base body, and they offer a lot of really fun character-specific elements, from the slightly askew eyes, to the pinky-out trigger finger.  Clearly a lot of fun was had sculpting this guy.  Though he’s built on one of the most common base-bodies in the Hasbro stock, he actually feels incredibly unique.  Deadpool’s paintwork is pretty standard Legends faire, but it’s worth noting that, like the rest of this series, the application is a lot cleaner than some of Hasbro’s prior attempts.  Hands down, the best thing about this figure is the accessory selection.  Since he doesn’t have a B-a-F piece, Hasbro’s made sure to pack him with a full arsenal, which includes two pistols, a large machine gun, a smaller machine gun, two katanas, a knife, and a rocket launcher (with a boxing glove at the end, because why not).  He also includes an extra unmasked head, and most amusingly, a taco.  Combine that with Spider-Man’s pizza, and the Legends are starting to get some nice food options.

THE ME HALF OF THE EQUATION

I had sort of resigned not to find this guy, since he was the most sought after figure in an already very sought after set of figures, and I didn’t need him to finish Juggernaut.  After finding Rogue and writing all of the reviews, I figured I was done with this series.  A couple days after the Juggernaut review went live, I was moving into my new apartment, and my parents had stopped by a nearby Walmart to pick up a few necessities.  When they arrived at the apartment, this guy was also in the bag, which was a nice pleasant surprise.  Despite my mixed feelings about the current state of the character, this is a really awesome figure, and caps off what is perhaps the best series of Hasbro’s run with Legends, if not the best series of Legends period.

deadpoolhas5

#1070: Sam Wilson – Captain America, Vision, & Kate Bishop – Hawkeye

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

SAM WILSON – CAPTAIN AMERICA, VISION, & KATE BISHOP – HAWKEYE

MARVEL LEGENDS SERIES

falccapviskateguy1

Wow, Hasbro sure is swamping us with Marvel Legends, aren’t they?  After a fair delay, the Giant-Man Series finally hit just about everywhere, very closely trailed by the Juggernaut Series.  The Abomination and Dr Strange series are also starting to hit in some areas as well. On top of that, there have been a number of exclusive items, with Walgreens getting two figures right on top of each other, and Walmart getting a pair of exclusives (that I still need to find).  There have also been two boxed sets: the Civil War Spider-Man set (which had a movie Spidey alongside re-decoed versions of Cap and Iron Man), and a set containing Sam Wilson as Cap, Kate Bishop as Hawkeye, and Vision…as Vision!

THE FIGURES THEMSELVES

This trio is exclusive to Toys R Us and is loosely themed around looks from the post-Axis Marvel Now! stuff.  Sam and Kate both follow a firm legacy heroes theme, which kind of makes Vision stick out a bit.  Of course, flip-side, Sam and Vision are both part of the main Avengers line-up, and Kate isn’t.  So, exactly who’s left out is really up to you.

SAM WILSON – CAPTAIN AMERICA

falccapviskateguy5We’ve gotten him in both Minimate and 3 3/4-inch form, so it was about time we got a FalCap Marvel Legend.  Bonus points for being the first Sam Wilson Legend since the Toy Biz run!  The figure is about 6 1/2 inches tall and he has 32 points of articulation.  Structurally, he shares several pieces with 2014’s Marvel Now! Cap figure.  He has the arms, legs, and pelvis from that figure, along with an all-new head, torso, belt, and shoulders.  The Now! Cap parts aren’t a perfect match for FalCap’s design, but they’re close enough to work without too much trouble.  The new pieces match up well with the older parts, and are pretty decent sculpts on their own terms as well.  I wasn’t 100% sold on the head sculpt at first glance (as with so many of Hasbro’s Cap sculpts, I think it looks a little too mean for the character), but after having it in hand, I actually don’t mind it.  His hair seems a little closer cropped than his usual comics appearance, but it’s not like it’s completely wrong or anything.  All in all, it’s one of those sculpts that has some minor flaws here and there, but looks a lot better as a whole, which is what really matters.  The paintwork on FalCap is pretty solid. The shades on the colors are a bit more subdued than those on Now! Cap, which is fair, since he was probably a little too bright.  These colors look about right for Sam’s comics design, and still have enough vibrance to give him some pop.  The application of said paint is decent enough, though there’s still a bit of slop, especially on the switches from blue to white.  He could be a little better, but he could also could be far worse.  FalCap includes his mighty shield, which is all well and good, but what he doesn’t include are his wings.  Sure, he doesn’t always have them, but he does most of the time, and their omission here is a bit glaring.

VISION

falccapviskateguy3Vision’s a popular guy!  This is his third Legend in the last year, and the second time he’s been in one of these exclusive three-packs.  This time around, he’s based on his Daniel Acura-designed look from the latter half of Remender’s Uncanny Avengers run, which also happens to be the costume he’s wearing currently.  If I’m honest, it feels a little over designed, though, and I miss the yellow.  Also, the red bits make it look like he’s running around half naked.   That said, I like it a bit better then his first Now! look.  The figure is about 6 1/4 inches tall and he has 32 points of articulation.  He’s built on the Bucky Cap body, with a new head and an add-on for the cape.  I was a bit disappointed with the last Vision head sculpt, so I’m happy they didn’t re-use it a third time here. This may well be my favorite Legends Vision sculpt.  It just captures the character quite nicely, and is very sharply defined features.  The cape is kind of an awkward design, but it’s been translated into three dimensions well enough.  It’s definitely a better attempt at a cape than the one Hasbro was using before (which, judging by all the currently shown figures, has been justly retired from the line).  Paint is the one real downside to this guy.  Of the three figures included in this set, this guy definitely has the sloppiest paint in the bunch.  It’s just all over the place.  I mean, he looks okay from a normal viewing distance, but up close he’s got a lot of rough edges, and there’s a few spots where the paint doesn’t really follow the sculpt very well.  That being said, the colors are at least nice and vibrant, and he stands out quite nicely on the the shelf.  Vision doesn’t get any accessories, but I can’t really think of what you’d give him, so that’s okay.

KATE BISHOP –  HAWKEYE

falccapviskateguy2At long last, Kate Bishop makes her way into the action figure world!  It took them long enough, since the rest of her Young Avengers teammates were released way back in 2006.  Of course, this costume doesn’t technically match the rest of them, and we still don’t have Cassie Lang, but let’s not kick the gift horse in the mouth here.  Kate here is sporting her more recent, jumpsuit look from the pages of the last two Hawkeye series.  It’s not a bad look (and it makes me feel a little bad that I never got one of the Now! Hawkeye figures), and it’s the one she’s been wearing for the last several years.  The figure is about 6 inches tall and she has 27 points of articulation.  She’s built on the Phoenix body, which is definitely a good one.  It works pretty well for Kate, especially since this is the slightly more grown-up version of Kate from the last few years.  She gets a new head and lower legs, which blend well with the rest of the body.  The head does a very good job of capturing Kate, and possesses a lot more personality than is usually seen on female figures.  Kate also got a new left hand for gripping her bow, which is cool.  She has to make due with the basic open gesture right hand to be her drawing hand, which isn’t perfect, but isn’t as bad as you might think.  She also gets an add-on piece for her belt and quiver, which sits very nicely, and does a great job of completing her look.  Kate ends up with the best paintwork of the three figures in this set (which is nice, since it’s her debut figure and all).  It’s still not 100% perfect, but it’s pretty close.  Kate is packed with her bow, which is the same one included with the last few Hawkeyes, but with proper paint this time around.  Some arrows might have been nice, but the lack of them isn’t new to this figure, so it’s not hugely surprising.

THE ME HALF OF THE EQUATION

I picked these guys up from my local TRU last month.  I was actually searching (unsuccessfully) for the Juggernaut series at the time, so these guys were a little bit of a surprise.  This is a set I’ve been eagerly awaiting, ever since it’s announcement.  Kate is the main draw, of course, since she’s never had a figure before, and I’m a pretty big Young Avengers fan.  She’s the strongest figure in the set, too, making her the   real star here.  That being said, FalCap was somewhat overdue, the new Vision is much appreciated, and both figures are both really solid additions to the line.  Unlike prior sets, all three figures included here are real winners, and I don’t think any of the three feels like a forced heavy hitter.

falccapviskateguy7

#1064: Punisher

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

PUNISHER

MARVEL LEGENDS SERIES

punisherhas1

“A ruthless vigilante, Punisher single-handedly takes down crime one bad guy at a time.”

Historically, I’ve never been much of a Punisher fan.  For me, he was one of the prime examples of what went wrong with comics in the late ‘80s on into the ‘90s.  An amoral anti-hero who’s primary gimmick was shooting stuff up, who operated on making other, less extreme heroes look lame and old-fashioned.  When he was announced to be appearing in the second season of Netflix’s Daredevil series, I was a little apprehensive, but Jon Bernthal’s phenomenal turn as the character was one of the best parts of the season, and made me realize that I didn’t hate the character as much as I’d thought, I just hadn’t seen the right interpretation of him.  As it turns out, the timing was just right on me getting into Punisher, since he just got a brand-new Marvel Legend, which I’ll be taking a look at today.

THE FIGURE ITSELF

punisherhas2Punisher is the latest Walgreens-exclusive Marvel Legends Series figure.  Going by the back of the box, he’s supposed to be a part of the Absorbing Man series from earlier this year, though he didn’t arrive even close to that series’ release, nor was he intended to.  He ended up hitting stores about a month ago, not long after the Namor figure (making them the two closest released Walgreens-exclusives since they started carrying the figures).  The figure is based on Punisher’s Jim Lee-designed look from the ‘90s, which is a decent choice, since it’s just a slight variation on his classic design.  The figure stands 6 1/2 inches tall and he has 32 points of articulation.  Punisher is built on the Reaper body, which was somewhat surprising at first, but, upon having the figure in hand, feels like a pretty good choice. The only downside to this body is that they have yet to release hands with trigger fingers for it, which is a bit of an issue for a gun user like Punisher, but can fairly easily be remedied with a little minor modification.  Punisher gets a new punisherhas3head, as well as two add-on pieces for his shoulder straps and belt.  The new head is quite a nice piece.  The headband is certainly a unique look, and the whole sculpt captures the Lee take on the character quite well, as well as fitting the base body very nicely.  The add-ons are also very well-rendered pieces, which add a nice extra touch of character to the figure.  Punisher’s paintwork is clean and sharp, and makes the figure look very well put together.  The slightly off-black of the uniform looks really nice, and the details such as the logo and the face are superbly rendered.  The accessories are an area where this figure really shines.  He gets an extra head, sans headband, for a more classic look, an m60 machine gun, a Striker shotgun, and a SMAW rocket launcher.  That’s actually a pretty impressive selection, especially compared to the likes of Winter Soldier or Black Widow from earlier in the Infinite Series line.

THE ME HALF OF THE EQUATION

Wanna guess where I got Punisher?  That’s right, Walgreens!  After tracking down <most of> the latest X-Men series, this guy was at the top of my list.  My dad, who was helping me track down the X-Men figures, actually saw this guy and didn’t realize I hadn’t gotten him yet.  So, we made a trip back to that same Walgreens and I picked him up.  Gotta say, I really like this guy a whole lot, and that’s surprising to me, since I didn’t care about the character a year ago.

punisherhas4

#1053: Juggernaut

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

JUGGERNAUT

MARVEL LEGENDS SERIES (HASBRO)

juggernauthas1

We now return you to your regularly scheduled programming…

I’m sure those of you who were anxiously awaiting the final figure from my recent X-Men Legends reviews were quite put out with yesterday’s Star Trek-themed review.  Or maybe you weren’t.  You probably weren’t.  Regardless, we’re back with the X-Men today, taking a look at the latest X-Men-themed Build-A-Figure, the unstoppable Juggernaut!

THE FIGURE ITSELF

juggernauthas2Juggernaut is, unsurprisingly, the Build-A-Figure for the Juggernaut series of Marvel Legends, which has started hitting stores in the last month or so.  This is Juggernaut’s second Legends figure, and his first since way back in Series 6 of Toy Biz’s run with the line*.  Like that figure, this guy is sporting his classic attire, which makes sense.  None of his other designs have really caught on the same way.  The figure stands about 9 1/2 inches tall and he has 28 points of articulation.  Juggernaut is one of the largest of the more recent, dwarfing everyone but the Hulkbuster B-a-F.  He’s built on a body that hasn’t seen use before, but I feel almost certain will see re-use down the line.  In many ways, the construction of this figure is quite similar to Hasbro’s Marvel Universe Juggernaut from several years ago.  That was a very good figure, and by extension, so is this guy.  The build is definitely absurdly large, but appropriately so for Juggernaut.  While most of the figure is fairly smooth and clean, the armored bits, belt, and boots all feature some pretty awesome texture juggernauthas3work, which makes him look suitably worn-in, which definitely works for the character.  The helmet and head are separate pieces, but they are glued together, and the head is just the face and jaw, so it’s not meant to be removed, which is one of two minor issues I have with the figure.  The other is the facial features on the underlying face.  They’re alright, but the eyes feel just a touch too far apart, especially compared to the size of the mouth.  It’s not immediately apparent, though, and it’s not like he’s never been drawn that way in the comics.  The paintwork on Juggernaut is pretty decent.  It’s mostly pretty basic, but mostly pretty clean.  There’s a bit of extra detailing on the armored parts, which helps to accent the sculpted texturing.  Juggernaut has no accessories, but he’s kind of an accessory himself, and he hardly feels like a rip-off, just given the sheer size of the figure.

THE ME HALF OF THE EQUATION

If you follow the site, you should have a good idea of where Juggernaut came from; he was pieced together from the parts included with all those X-Men Legends I worked so hard to find.  Despite how hard I was looking for the figures, I think Juggernaut may be the fastest I’ve completed a B-a-F (barring when I buy a complete set online).  I always wanted the Toy Biz Legends Juggernaut, so I’m quite happy to have gotten this guy.

All in all, this has been a fantastic set of Marvel Legends, probably my favorite since the Infinite Series re-launch.  Juggernaut is an awesome Build-A-Figure, and I can’t say I resent having to pick up any of the figures that made him.  In fact, several of the figures here are some of the best Hasbro’s put out.  I hope they can keep up this quality!

*Fun fact:  With the exception of the somewhat tacked-on Thomas Jane Punisher, all of the Series 6 figures (Wolverine, Phoenix, Deadpool, and Juggernaut) received updates in the Juggernaut series.

juggernauthas4

#1051: Marvel’s Rogue

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MARVEL’S ROGUE

MARVEL LEGENDS SERIES (HASBRO)

roguehas1

 

“With just one touch, Rogue can absorb anyone’s superpowers – making her capabilities in any matchup nearly limitless.”

Here she is. The one that started it all (No, not the whole X-Men thing; that had been going for a good twenty years before she came along.)  Back at SDCC last year, Hasbro showed off their Red Onslaught prototype. This was immediately followed by questions of whether or not he’d be getting a regular Onslaught head. Hasbro said not in the same series, but that they were working on a solution. A few months later, at New York Comic Con, this figure showed up in the display case, with an Onslaught head beside her. Was she part of the Captain America series? Would she be some sort of exclusive? Or, was it possible that she was just the first piece of an entire series? Well, if you’ve been following the site for the last week, you know which one it was. Now, just under a year later, the Rogue figure is here (so’s the Onslaught piece, but that ended up elsewhere). Let’s see how she turned out!

THE FIGURE ITSELF

roguehas2Rogue (who, like Havok and Phoenix before her, gets the “Marvel’s” possessive added to her name) is figure 5 in the Juggernaut series of Hasbro’s Marvel Legends. This is only Rogue’s second time as a Marvel Legend, following the X-Men Legends boxed set version from more than a decade ago. How we went that long without getting a single Rogue* is beyond me. This Rogue uses the same Jim Lee design as the last Legends Rogue. It’s kind of her signature look, and it was very much in need of an update. The figure stands about 6 ¼ inches tall and she has 26 points of articulation. Rogue is built on the Moonstone body, which, in addition to being a good fit for the character is also just an a pretty decent base body (aside from a few minor issues). The figure gets a new head and upper arms, as well as add-ons for her jacket, belt, and the cuffs to her gloves and boots. Her construction is in many ways quite similar to the Marvel Universe Rogue (which I reviewed waaaaaaaaay back in 2013), but the increased scale makes the add-on pieces mesh a bit better this time around. One of the main roguehas3issues with prior Rogue figures was that her face always seemed to end up looking…less than stellar. Like Scarlet Witch, her Toy Biz figure suffered from rather mannish facial features. This figure doesn’t fall victim to this issue, and ends up being one of the best looking Rogue figures to date. The sculpted jacket is also a marked improvement over the pleather jacket from the Toy Biz version. The only real issue I have with the sculpt isn’t the sculpt proper, but the assembly of my figure: she has two left upper arms. It’s an annoyance, but it could be a lot worse. Overall, Rogue’s paintwork is pretty decent. There are a few minor spots of errant paint, but it’s mostly pretty sharp. It’s also really bold and pleasant to look at. I’m really digging all the warm bright colors in this series. Rogue included an extra, un-gloved right hand (which is a really fun piece to have), and the left leg of Juggernaut.

THE ME HALF OF THE EQUATION

Rogue was the figure I was most anticipating from the series. Of course, she was the figure a lot of other people were anticipating too, meaning she was the most difficult of the seven figures to obtain. I actually found the packaging for this figure a month or so back, but some dipstick had swapped out the Rogue figure inside for the old X-Men Legends version, which was a serious let down. After searching for a few weeks, I ended up just sort of stumbling upon Rogue last week during a quick stop-in at my nearest TRU. I’m really happy to have found this figure, and she’s definitely one of my favorites from the set. I can’t wait to get some more Jim Lee X-Men to go with her!

*Hasbro had planned to release a more modern Rogue as part of the Puck Series of Marvel Legends that tied into The Wolverine, but when that assortment was moved to specialty, she was bumped from the line-up.

roguehas4

#1050: Cable

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CABLE

MARVEL LEGENDS SERIES (HASBRO)

CableHas1

“A lifelong soldier, Cable perfected his fighting prowess when a technological virus suppressed his natural psychic abilities”

Wow, that’s definitely a streamlined version of Cable’s background. I guess “son of Cyclops and the clone of Jean Grey who was kidnapped, sent to the future, contracted a deadly made up disease, was raised by his father and the non-clone Jean Grey’s consciousnesses transported into two unrelated bodies in the future, who came back in time to just after he was originally kidnapped, and who may or may not actually be a clone” was just too much for the non-comics-reading fans. It might scare them away! Despite his complicated backstory, he’s a pretty straightforward ’90s anti-hero. He’s had a number of figures throughout his career (most of them are from the ’90s), but it’s been a few years. Fortunately, Hasbro’s seen fit to give him a brand new figure!

THE FIGURE ITSELF

CableHas2Cable is figure 7 in the Juggernaut series of Marvel Legends. This is Cable’s fourth time as a Legend (counting the paint variant from Series 6). The last one was way back in 2007, as part of a Walmart exclusive two-pack, so this one’s long overdue. He’s based on his Ed McGuinness-designed look from Avengers: X-Sanction. It’s a bit of an oddball choice, but it is the book that brought Cable back following his death during “Second Coming.” It’s not a bad look (even if it lacks shoulder pads…), and it fits pretty well with the rest of the series of figures. The figure is a little over 7 inches tall and he has 29 points of articulation. Of note with the articulation is the inclusion of a ball joint for his mid-torso movement. It’s a lot more poseable than the usual hinge joint, which adds a lot to the playability of the figure. Cable reuses most of Nuke’s legs (he gets a new set of shins), as well as the right arm of the basic Hyperion body. The rest of the figure’s sculpt is new to him. It’s actually very nicely handled. The armor has lots of fun little details (including bullet damage, which is an impressive thing to see on a mass-produced figure), and a ton of great texture work. While this design was exclusively drawn by McGuinness, the sculpt sticks more with the basic style of the line, which makes Cable a bit more versatile than he might be otherwise. The paintwork on Cable isn’t perfect, but it’s pretty solid. Bleed over and slop is minimal, and the colors definitely fit the design. I do wish that the bullet damage were actually painted, but that’s minor. Cable includes two big sci-fi guns. The larger of the two has a removable ammo belt, and is in general my preferred of the pair. Cable also includes the pelvis of Juggernaut.

THE ME HALF OF THE EQUATION

I picked up Cable at the same time as Wolverine. I wasn’t sure if I was going to pick this guy up initially (Cable’s hardly one of my favorite characters), but I kinda wanted to finish Juggernaut. I’m actually really glad I picked him up, because he’s a surprisingly awesome figure. How’d they manage to make a Rob Liefeld character into such a cool figure?

CableHas3