Category Archives: Reviews

#0268: Ophidian Squad Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , ,

OPHIDIAN SQUAD SOLDIER

POWER LORDS (FOUR HORSEMEN)

PowerSoldier2

Once again, I’ll be taking a look at the Four Horsemen’s recent revival of the 1980s toyline Power Lords. Today’s figure isn’t based on one of the figures from the vintage line, but is a new design created by the Four Horsemen to allow for some parts re-use between the figures: The Power Soldiers! The Power Soldiers are an army builder, built on the same base as lead character Adam Power. This time around, it’s the Ophidian Squad Soldier!

THE FIGURE ITSELF

The Ophidian Squad Soldier is part of the third set of pre-release of Power Lords, and is the third deco of this particular figure. Like the rest of the Power Lords line, the Soldier was available through the Four Horsemen’s online store. The figure stands about 3 ¾ inches tall and features 23 points of articulation (the extra point comes from the neck joint, to allow it to be swappable). The figure features a quality sculpt, just like Lord Power. In fact, from the waist down, he and Lord Power share all the same pieces. The torso and arms feature a nicely detailed sculpt to match the detailing on the legs. He also features a head sculpt, shared with all the basic Power Soldiers. It’s a really cool sculpt, with a neat featureless visor. The Power Soldiers were designed to be a less expensive item than the regular series figures, so the paint on the Ophidian Squad Soldier is basic. He’s molded in a dark blue plastic, with paint on his visor, logo on his torso, and his belt. It’s all cleanly applied, and the blue looks quite nice. He actually bares more than a passing resemblance to the vintage Cobra Commander design, which isn’t a bad thing. The Ophidian Squad Soldier features a staff and a rifle, which are the same ones included with Lord Power, but this time cast in dark blue.

PowerLords PowerSoldierWilson

THE ME HALF OF THE EQUATION

I ordered the Ophidian Squad Soldier at the same time I pre-ordered Lord Power. I had actually been meaning to pick up one of the Power Soldiers since the first “pre-release” came out, but I kept missing the sales. So, when I was ordering Lord Power and saw that this guy was still in stock, I decided to go for it. He’s a fun figure, aside from the same hip limitation that plagued Lord Power. If the Four Horsemen could make a change to the base body, that would improve the figures greatly.

#0267: Lord Power

Posted by Ethan Wilson in Reviews and tagged with , , ,

LORD POWER

POWER LORDS (FOUR HORSEMEN)

LordPower1

In the 1980s, toymakers Revell, most commonly known for their line of models, produced their own toyline, known as Power Lords. The line was only a moderate success, but it built up a sizeable and quite loyal fanbase, and is often viewed as being rather a head of its time. A few years ago, the sculpting team the Four Horsemen, known for their work on Masters of the Universe Classics and DC Universe Classics for Mattel amongst other things, picked up the license to Power Lords, working from the original designs for the characters. The vintage line is probably best remembered for the main character’s two sided torso arms and head, which allowed him to “transform” but swiveling his torso. The new versions have foregone the action feature, instead making each look its own figure. I’ll be looking at Lord Power, the main character (well, half of the main character…). Let’s see how he turned out!

THE FIGURE ITSELF

LordPower2Lord Power is part of the first series of Power Lord, sold on the Four Horsemen’s website, storehorsemen.com. The figure stands about 3 ¾ inches tall and features 22 points of articulation. Design-wise, he’s based on one of the two possible looks of the vintage Adam Power figure. Lord Power represents the powered-up design. The figure’s sculpt is quite nice, and incredibly detailed, especially for something in this scale. All of the red “veins” on his torso and arms have been sculpted in, which is a detail that could have easily been done with paint to save money. The lower half of the figure features a jump suit sort of look that has a nice, semi-insulated feel. Paint-wise, the figure is pretty decent. There are a few spots of slop or bleed over, but nothing too noticeable, and certainly not anything that ruins the figure. The biggest issues seem to be on the legs, where the red and orange don’t always stay in the areas they’re supposed to. Lord Power includes a staff, a rifle, and an extra helmeted head, done in the same orange and red on the figure’s legs. The staff and rifle are basic accessories for the line, and they’re pretty cool. The extra head is less for Lord Power, and more for his other half, Adam,LordPowerWilson to allow collectors to have both versions of the Power Soldier in Adam’s colors. This one is the “Elite” style helmet, which has more of a gasmask styling to it.

THE ME HALF OF THE EQUATION

I pre-ordered Lord Power from Store Horsemen a few days after the first series went up for sale. I never had any of the vintage figures, but I vividly remember the ads featuring a transforming Adam Power that graced the back cover of many a comicbook I owned. I always found the whole two-sided figure thing a little odd, so I’m glad to see a new take on the designs. Plus, the Four Horsemen presented their usual quality work on the line, which was enough to at least pull me in for Lord Power. He’s a pretty cool figure. My only real complaint is the lack of decent hip articulation, but other than that, I’m quite happy to have picked this guy up. After having gotten him, I’m starting to think about picking up a few other figures in the line.

#0266: Ultraman Ace

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ULTRAMAN ACE

ULTRA-ACT

UltramanAce1

My Ultra-Act reviews have slowed down a bit since I first got into the line, but that doesn’t mean my interest in the line has waned. I still have a few of the upcoming figures and re-releases on pre-order, so there should be a few more reviews on the way, just a bit more spaced out. I recently acquired Ultraman Ace, the 4th main Ultraman, and the star of Ultraman Ace, as well as a recurring character in the following Ultraman Taro. He’s also the adopted brother of Taro, and the adopted son of Mother and Father of Ultra, for those of you attempting to map out the family tree.

THE FIGURE ITSELF

Ultraman Ace was a third quarter 2013 release in the Ultra-Act line. As is the usual standard with this line, Ace wasn’t part of a series; he’s just a single release. The figure stands about 6 inches tall and features the standard 40 points of articulation sported by most of the figures in the line. Ace was released around the time of the second version of the original Ultraman, which means he fits in nicely with the line’s more recent releases, and looks perfect with the rest of the Ultra Brothers. Ace’s sculpt is a pretty decent recreation of Ace’s look from the show. The shoulders are perhaps a tad bit broader than they should be, but the proportions look great otherwise. The paintwork on Ace is nice and clean, with no noticeable slop or bleed over present. Like any good Ultra-Act release, Ace features a nice selection of accessories, including: an extra color timer, a sword, a clip to attatch Ace to a stand, and 11 hands: fists (L and R), open gesture (L and R), karate-chop (L and R), sword-holding (R), peace sign (R), a right hand with an energy beam attatched, and two hands with a different beam attached. While that’s not quite as many accessories as my last Ultra-Act figure, Leo, it’s still a pretty impressive assortment. The sword adds some uniqueness to Ace, and the hands add for some additional character as usual.

UltramanAce2 UltramanAce6 UltramanAce5 UltramanAce4 AceWilson

THE ME HALF OF THE EQUATION

Ace was a purchase I took my time on. I’ve picked up several other Ultra-Act figures in the last year or so, and I had the majority of the early Ultramen, so Ace was the biggest hole in my collection. Ace’s price came down a bit on Amazon, so I decided to go for him. I’m really glad I did. Ace has a great design, and the figure conveys it really well.

UltramanAce7

#0265: Caesar

Posted by Ethan Wilson in Reviews and tagged with , ,

CAESAR

DAWN OF THE PLANET OF THE APES (NECA)

Ceasar1

It’s not often that I review a figure from a film I haven’t seen. I think the last time I did that was with The Good, The Bad & The Ugly Minimates set, and those were Minimates, so I had that excuse going for me. Sometimes I’ll buy figures from a movie I’m looking forward to prior to seeing it. It’s not often I buy a figure from an upcoming movie I’m not even certain I’ll see in the theatre. But, that’s the case with today’s figure, Caesar, the lead character from this month’s Dawn of the Planet of the Apes. I’ve seen the previous film, Rise of the Planet of the Apes, and I thought it was pretty good, but I’ve yet to really make up my mind on the sequel. It looks like it may have potential, so I might see about checking it out. Anyway, NECA picked up the rights to the film, and they’re doing a line of figures that just started hitting. So, let’s see how Caesar turned out!

THE FIGURE ITSELF

Ceasar3Caesar is part of the first series of NECA’s Dawn of the Planet of the Apes line. He stands about 6 ½ inches tall and features 24 points of articulation. Caesar is based on his look from Dawn, which is slightly different from his look in Rise, mostly in build and the presence of the tribal paint the apes are sporting this time around. Caesar sports an all new sculpt, and a very good one at that! Near as I can tell from looking at trailers and the like for the movie, Caesar’s sculpt is a pretty dead on realization of the CGI model used in the movie. The figure is covered from head to toe in hair detailing, which is all impressively handled, but I think the best part of this figure is his face, which features an amazing amount of texture and detail, and just seems full of character. It’s not all perfect; some of the hair points in odd directions, and there’s a bald patch on his torso that looks a bit off. However, the sculpt as a whole is definitely most impressive. The paint work is on par with the sculpt, doing an amazing job accenting the already great sculpt with some pretty great texture work. They’ve also included the tribal paint, which looks appropriately uneven and worn. Once again, the bald spot on his chest stands out as one of the few bad marks, being just a slop of flat brown paint amongst an otherwise heavily detailed figure.  Caesar includes a spear, which can be separated into two pieces, and a spare set of gripping hands to hold the spear. The spear is nicely sculpted, though I did have a bit of difficulty getting the two pieces together. The hands hold the spear nicely, and swap out very easily.

THE ME HALF OF THE EQUATION

I honestly hadn’t intended to get this figure, at least not before seeing the movie. However, I was walking around my local Toys R Us, on the same trip where I acquired my second Striker Eureka figure. I didn’t want my only purchase to be a duplicate of something I already had, so I looked around to see if there was anything else I wanted. I came across an Engineer from Prometheus marked down to $2.50…and put it back. I do have the ability to say no! Ha ha! Anyway, I eventually came upon the Dawn figures, and I was so impressed by Caesar in person that I decided to go ahead and get one. Even if the movie’s terrible, he’s still a really great figure, most definitely worth the purchase!

CaesarWilson

#0264: Puck

Posted by Ethan Wilson in Reviews and tagged with , , , ,

PUCK

MARVEL UNIVERSE

Puck

One of the most overlooked superhero teams is Alpha Flight. If you’re going “Whaaaa?” at the name, allow me to fill you in. Alpha Flight is the premier Canadian superhero team, sort of like the Canadian Avengers. Marvel’s tried to push them on the general population a few times in the past, but they’ve never really caught on outside of the hardcore fans. Anyway, one of their more memorable members (in my opinion) is Puck, whose power is that he’s short. Or something. So, he’s got a figure from Hasbro’s Marvel Universe line, which I’ll be looking at today.

THE FIGURE ITSELF

Puck was released as part of Series 20 of the Marvel Universe line. The figure features 17 points of articulation, and stands about 2 ½ inches tall, which puts him about right for a 3 ¾ inch line. Puck appears to be an all new sculpt. The sculpt is short and stocky, which is perfect for Puck. The head sits a little bit too high, and the neck is a tad too thin, which makes his head look a little bobbly, but otherwise, everything looks great. The paint work is pretty decent. The eyes are a bit googly, and the hair on his arms and legs might be a tad uniform, but overall it’s all clean and without slop and bleed over. Puck includes a white bird, which I assume is meant to be teammate Snowbird in her…uh, snowbird form, which is a repaint of Falcon’s pet bird Redwing.

THE ME HALF OF THE EQUATION

Puck isn’t one of my favorite characters, but I don’t mind the character. He’s certainly one of my favorite Alpha Flight characters. Anyway, I hadn’t intended to pick up the Marvel Universe version of the character, mostly due him being full price, but only half the size. However, I was at my local mall’s Disney store with my friend Tim, and, in addition to the previously reviewed Winter Soldier, I also came across a poor lone Puck figure, marked down to $3. For less than half of his original value, I was more than happy to pick up Puck for my modest MU collection. Sure, I don’t own any other Alpha Flight members in this scale, but Puck’s a decent enough figure on his own.

#0263: Wolverine – Brown Costume, Woverine – Brood-Infected, & the Brood

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WOLVERINE – BROWN COSTUME, WOLVERINE – BROOD-INFECTED, & THE BROOD

MARVEL MINIMATES

Wolverine&BroodBroodverine&Brood

Okay, it’s time for another review from the wonderful world of Minimates! Once again, the figures in today’s review hail from the flagship Marvel Minimates line, which is a pretty huge line of figures. This time around, it’s two versions of Wolverine and the alien race the Brood from the X-Men side of things. Let’s have a look!

THE FIGURES THEMSELVES

Wolverine, the Brood, and Brood-infected Wolverine were released as part of Marvel Minimates Series 47, which was based around the “Outback” era of the X-Men comics during the 80s. Basic Wolverine was the basic release, with the Brood-Infected Wolverine as the one-per-case variant. One Brood was packed with each of the Wolverines.

WOLVERINE

This was this series’ normal Wolverine. He’s based on Wolverine’s brown costume, which he quite prominently wore for most of the 80s and a short period of the 90s. The figure is built on the standard Minimate body, so he stands about 2 ½ inches tall and features 14 points of articulation. The figure features a sculpted mask, belt, boots, and hands. All of these pieces have been used on previous figures, but given the similarities between this and other Wolverine looks, this is a completely understandable practice. Generally, they are the best available Wolverine pieces, so that works out well. The paint work on Wolverine is okay, but not the greatest. There are a few sloppy lines here and there, and my figure was missing the upper part of his left glove entirely. Obviously, the last one was an isolated incident, but it speaks poorly for the general quality control of this series. Wolverine includes a spare hair piece and a pulled down mask to hang on his shoulders. Both are new, which is impressive for a figure that is otherwise re-use.

WOLVERINE – BROOD INFECTED

The Brood infected wolverine is a tweak on the basic Wolverine in the series. He is meant to depict Wolverine in the midst of being transformed into one of the Brood. He’s in the brown costume, like the normal Wolverine, but this time around it’s a lot more greyed out, to match his different skin tone. Like the regular Wolverine, this one is built on the standard Minimate body and features a sculpted mask, belt, boots, and hands. The belt and hands are the same as those seen on the regular figure, but the mask and boots are different and in fact are brand new to this particular figure. Both pieces represent slightly more exaggerated proportions than the regular versions, which lend themselves more to the Brood-transformation. The paint work is okay, but not great. There aren’t any outstanding issues like with the normal version, but he still suffers from some fuzzy lines, and a few misplaced details. This Wolverine includes a pair of Brood tentacles, which can be put on in place of his normal hands.

THE BROOD

The Brood are one of the more prominent alien races to grace the pages of X-Men. They have quite a few similarities to the Xenomorphs of the Alien franchise, though, interestingly enough, I’m not a huge fan of them. This is meant to be a basic Brood drone, which is the most common design choice, and the one that is best to army build. The figure is sort of based on the base Minimate body, but he does not make use of anything below the waist. The figure makes use of several unique sculpted bits, and sits horizontal, so it measures a little under 2 inches in height and about 3 inches long, with 20 points of articulation, thanks to his six arms. The figure features a sculpted head, torso cover with ball joints for two extra arms on either side, a tendril on each arm, and a tail that plugs into the bottom of his torso. All of these pieces are new to the Brood, though the tendrils are shared with the infected Wolverine. They all work pretty well, though the head is more like a hat piece to the normal head, which makes it look odd when viewed from bellow. The paint work on the figure is mostly just the basic green-brown, with a few details on the head and tail. Everything is pretty clean, though there are a few instances of slop. The Brood includes no accessories.

THE ME HALF OF THE EQUATION

As with many other Marvel Minimates sets, these two were purchased, along with the rest of their series, from my local comicbook store on the day of release. I was excited for the series overall, but these two sets were probably my least favorite. Initially, I hadn’t even intended to pick up the Brood-Infected Wolverine set at all, but when I saw them at the store, I figured they looked cool enough. I’m still not the biggest fan of the Brood, and that figure in particular pushes the use of the base body almost to its breaking point, but I can’t think of another way to translate the design. These sets gave us a pretty great version of Wolverine’s brown costume, a neat Brood-Infected version, and a decent Brood figure for those who are fans. All in all, I’d say these sets are a pretty decent win for the line.

#0262: Winter Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , ,

WINTER SOLDIER

MARVEL SELECT

WintersoldierSelect

On the Fourth of July, I took a look at Diamond Select Toys’ Marvel Select line’s version of Captain America. I wouldn’t want Cap to be lonely, so how about giving him a buddy. And who better than Cap’s bestest friend ever, Bucky Barnes! Okay, actually it’s Winter Soldier, but they’re actually the same person (umm….spoilers?). Anyway, Marvel Select just got a comic version of Winter Soldier, released to tie-in with this summer’s Captain America: The Winter Soldier. Let’s see how the figure turned out!

THE FIGURE ITSELF

Winter Soldier is a Disney Store exclusive from the Marvel Select line, released in early 2014. The figure stands about 7 inches tall and features 29 points of articulation. I believe he’s meant to be based on the Soldier’s most recent look, which is an amalgam of his original comic look and his look in Captain America: The Winter Soldier. The figure features an all-new sculpt, and a pretty good one at that. Right off the bat, it’s a more consistent sculpt than a lot of previous Select figures, like Captain America for example. It’s not a perfect sculpt; the chin is perhaps a bit too large, and the arms are a little gangly. Other than that, it’s a great piece of work. The Soldier’s costume allows for lots of textures in the different types of material used in the uniform, and the sculpt handles them all very nicely. The move to a new style of hip joint is probably the greatest thing about the figure, especially looking at the direction of the line as a whole. The new joint is similar to those seen on a DC Universe Classics figure, and it allows for a better range of movement without interrupting the sculpt. I do wish the range of motion was a little bit better on the ankles, but they aren’t terrible. The paint work is pretty decent. There’s no real occurrence of slop or bleed over, and there’s a lot of nice texture work that really accents the sculpt well. Winter Soldier features a nice assortment of accessories, which include a sniper rifle, a handgun, a submachine gun with a strap, a crate with Russian markings, and a stand made to look like a section of wall and floor. The crate in particular is quite impressive, just due to the impressive amount of details present on almost every side.

WinterSoldierSelect2WinterSoldierSelect3WinterSoldierCrate

THE ME HALF OF THE EQUATION

I picked up Winter Soldier from the Disney Store at the local mall. I was there to take care of a few other things and my friend Tim wanted to stop in the Disney Store to look at the new Guardians of the Galaxy Nerf stuff, which he had spied through the window. While he was looking at those, I happened across the store’s Marvel Select display. I had seen pictures of this guy online, but hadn’t thought much about it. I’m at best a moderate fan of Winter Soldier. Before this year I didn’t even own a single figure of him. But, seeing the figure in person was enough to sway me. I’m definitely glad I decided to get him; he’s probably one of the best figures the Marvel Select line has to offer, and he’s just a pretty great toy in general!

WinterSoldierSelectComparison

#0261: Iron Patriot & Extremis Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

IRON PATRIOT & EXTREMIS SOLDIER

MARVEL MINIMATES

Extremis&Patriot

Minimates represent a large portion of my large collection of action figures, and Marvel Minimates are the backbone of the Minimates brand, so it’s no surprise that Marvel Minimates have a high frequency of review on this site. Add in the fact that the reviews are a little bit easier to write, and also tend to garner a decent sized number of page views, and you’ve got a winning combination.  So, today, I’ll once again being going back to the Minimates well, this time to review Iron Man 3’s Iron Patriot & Extremis Soldier. Let’s jump on in!

THE FIGURES THEMSELVES

Iron Patriot and the Extremis Soldier were released in Marvel Minimates Series 49. The series was a tie-in to Iron Man 3, so it depicted characters from the movie. The set was also released in slightly different packaging in the Toys R Us exclusive Iron Man 3 assortment, making it the easiest to acquire of the movie sets.

IRON PATRIOT

Iron Patriot is the newer, friendlier name for Colonel James Rhodes’s War Machine armor. He’s a pretty pivotal character in the movie, so his inclusion here is a no-brainer. He’s built on the standard Minimate frame, which meads he features 14 points of articulation and stands about 2 ½ inches tall. The figure features ten sculpted additions: helmet, chest plate, shoulders, hands, waist, boots, and shoulder cannon. All of these pieces are new to this figure, although they were shared with his Series-mate the War Machine 2.0. It’s a sensible set of parts to share, given that they’re actually the same armor with a different paint job. The sculpt is pretty decent, though all the add-ons do end up making him look just the slightest bit pudgy. The paint work is pretty good overall, but it’s not as great as other Minimate releases. The detail lines are all nice and clean, but the basic color layout is a bit sloppy, especially in the transitions between silver and the other colors. Underneath of the helmet is a fully detailed Rhodes face, which has a pretty decent Don Cheadle likeness and has nice and clean paint apps. Iron Patriot’s sole accessory is a basic clear display stand, but given the large amount of parts that went into his armor, that’s more than acceptable.

EXTREMIS SOLDIER

The Extremis Soldier doesn’t refer to a single character in Iron Man 3, but rather a whole subset of characters who were suped up on Extremis and working for the big bad. They were key to the final battle of the movie, and Diamond has created a hodge-podge of looks to simulate the soldier in a generic way that allows a collector to have a few in a group. The figure is built on the standard frame, just like Iron Patriot, so he has the same height and articulation. The Extremis soldier incudes a sculpted hairpiece, vest, and holster. All three of these pieces are re-use. The hair originally appeared on Series 24’s Shocker, the holster comes from Series 27’s Nick Fury, and the vest comes from the first version of Trench Mauser from the Expendables line. The pieces offer a pretty good approximation of the kind of stuff the soldiers wore. The paintwork on the Extremis soldier is quite good, better than Iron Patriot for sure. All of the line work is nice and clean, and the Extremis details present on the face, torso, and shoulders looks great. The Extremis Soldier includes a pistol, which we’ve seen a few times before, and a spare blonde hairpiece, originally seen on Series 35’s Happy Hogan, which allows for an alternate look.

THE ME HALF OF THE EQUATION

Like most of my Minimates purchases, I picked up Iron Patriot and the Extremis Soldier as soon as they were available, which would have been a week or two after the release of Iron Man 3. Although the paint is a little bit sloppy on Patriot, he’s a nice bold design that really stands out on the shelf, and he’s got some really great sculpted pieces. Add in a pretty sweet looking Extremis Soldier who has several potential looks, and you’ve got a set that’s pretty much a winner!

Extremis&PatriotAlt

#0260: Black Lightning

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BLACK LIGHTNING

TOTAL JUSTICE

BlackLightning1

In the 90s, any DC toyline whose title didn’t include “Batman” was a rarity. In fact they were almost non-existent. Even today’s focus line Total Justice was originally called Batman: Total Justice. And this was a line that didn’t even really focus on Batman! I guess Kenner must have come to their sense by the time the line actually saw release, because the packaging dropped Batman’s name from the title.

Anyway, Total Justice was essentially a line based on the Justice League. Years later, the line would even be continued under the name JLA. The line offered many collectors the first chance since Super Powers to actually have a decent line up of DC characters, but it was plagued by silly “Tactical Armor,” a lack of decent articulation, and, most famously, X-Treme! poses. However, it was the only chance at getting those characters for quite some time, so collectors had to grin and bear it. Let’s have a look at one of the line’s more obscure additions, Black Lightning!

THE FIGURE ITSELF

BlackLightning2Black Lightning was released in the third and final series of Total Justice. This series was easily the most daring series of the line, as it lacked any heavy hitters. Black Lightning stands about 5 inches tall and features 5 points of articulation. The figure depicts Lightning in his costume from the time, which deviated a fair bit from his other costumes. It’s not a terrible design, but it’s easily my least favorite look of his, which hurts the figure a bit. Black Lightning featured an all new sculpt, though the arms and legs would be slightly retooled to be used for JLA’s Impulse and Superboy, respectively. The sculpt is actually rather reserved by Total Justice standards. The legs are in a slightly wonky pose, but the arms are actually in a pretty natural stance, and the face is surprisingly calm for this series. The paint work is rather simple, but it’s mostly evenly applied, with no real issues present. Black Lightning included torso and leg armor, as well as a big missile launcher thing. While this series was the first of Total Justice to give figures more sensible accessories, Lightning was not as lucky as his peers, and got stuck with the same usual wacky stuff.

THE ME HALF OF THE EQUATION

Black Lightning was the Total Justice figure I was always missing. There are other figures from the line I still don’t have, but this one was the only one from the final series, and he was also one of two heroes not to see a re-release in the JLA line (the other was Hawkman. I think it mostly had to do with the dated designs the figures sported.) So, when I finally found him at my local comicbook store a few weeks ago, I was happy to get one. Not thrilled or anything, but content. Sometimes, being content is enough.

#0259: Professor X – Space Rider

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

PROFESSOR X

X-MEN SPACE RIDERS

SpaceX1

X-Men. In Space! Yeah, I know, it’s a really highbrow concept. It was the late 90s, what do you want? Besides, the X-Men have actually spent a fair bit of time in space, so outfitting them with Space gear isn’t the worst possible idea, now is it? Plus, it totally gives the toymakers another excuse to re-release all the main X-Men that people just love buying. How could it go wrong? It couldn’t, it just couldn’t. Fool proof plan here. So, let’s just take a look at the Professor X from this line up, shall we?

THE FIGURE ITSELF

SpaceX2Professor X was released as part of the first, and only, series of X-Men Space Riders. The line was an off-shoot of the main X-Men line, much the same way the Savage Land line was. The figures were released as boxed items, along with some sizeable accessories. Space Riser Professor X stands about 5 inches tall and features 7 points of articulation. As far as I can tell, the Professor got a whole new sculpt for this line. They didn’t even reuse the same head like they did on the last one! The sculpt is a bit strange in a few areas, most notably the strange way his legs connect to his torso. One thing I do really like is the hydraulics on his legs, as they make for a good explanation to how exactly Charles is up and walking around. The right hand is sculpted around a bit of metal to aid in the figure’s interface with his vehicle, so it ends up looking a little bit on the odd side. The paint work is basic, but for the most part it’s cleanly applied, with very few issues of slop or bleed over. Professor X features a removable helmet, which fits nicely and looks super cool, and a “Space Sled,” which includes two missiles and at one point had a light up feature. The sled is an interesting piece, and interlocks with the sleds included with the rest of the series to form one big space ship. Thrilling!

THE ME HALF OF THE EQUATION

Professor X was purchased from my local comic book store just a few weeks ago. The owner had just gotten in a selection of older action figures, and had them all sitting on a table for $5.99 a piece. I had never gotten any of the Space Riders back in the day, apart from a Cyclops I got loose, but I was always fascinated by the figures. So, for $6, I figured it was worth the purchase. Professor X is a little dated compared to more recent figures, but I can’t help but look at this figure and think “Man, that looks cool!”