Tag Archives: 90s

#0186: Kraven The Hunter

Posted by Ethan Wilson in Reviews and tagged with , , , ,

KRAVEN THE HUNTER

SPIDER-MAN: THE ANIMATED SERIES

Remember my review of Unmasked Spider-Man from just last week? Good, that means this intro can be a bit shorter. Like that figure, this one hails from ToyBiz’s Spider-Man: The Animated Series line from the 90s, and also comes from one of the boxed sets ToyBiz released exclusively through BJ’s Wholesalers. This time around, it’s Kraven the Hunter, one of the classic Spider-Man foes. He was a hunter looking for a more exciting hunt, which led to him fighting Spidey on numerous occasions and eventually joining the first incarnation of the Sinister Six. Let’s see how he turned out!

THE FIGURE ITSELF

Kraven was released in the BJ’s exclusive Monster Mayhem set, which also included 5 other figures, all repaints. Kraven stands about 5 inches tall and has 9 points of articulation, which were both standard for the line. Kraven is 100% re-use, being a repaint of the main Spider-Man line’s own release of Kraven. The previous Kraven was based on his cartoon appearance, whereas this one seems to be more comic based. The biggest difference present is this figure’s leopard patterned pants in contrast to the previous figure’s black pants. The sculpt is a pretty good one, and is pretty in line with the classic Kraven design, so I can’t blame them for re-releasing it in a more comic accurate palate. The paint work is well applied and clean overall, and it appears to be a bit more detailed than the single release figure. Kraven included no accessories, which is a shame, because his hand is obviously molded to hold one.

THE ME HALF OF THE EQUATION

I acquired this BJ’s exclusive at KB Toys. Yes, you read that right. Apparently, BJ’s would only actually hold on to these sets for a short while before selling them to KB for the rest of the distribution. Hey, it works for me. Anyway, I was on a trip to the beach, I think right before my brother was born, but I don’t recall for certain. My dad took me to the nearby KB and they had this set there. I had known about its existence, thanks to the internet, but I hadn’t seen it in person. I remember being pretty happy to get it, though it wasn’t really for Kraven. Still, he’s a decent figure, and does help bring back the memories of getting the set.

#0181: Spider-Man – Unmasked

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SPIDER-MAN – UNMASKED

SPIDER-MAN: THE ANIMATED SERIES

Spider-Man, Spider-Man.  Does whatever a spider can.  Spins a web any size.  Catches thieves just like flies.  Look out, here comes a Spider-Man….Review.  It’s a Spider-Man review.  That’s what it is.

Yes, it’s another figure from the 90s Marvel Licensing giant that was ToyBiz.  They made a big success with X-Men, so they moved onto Spider-Man and ended up finding even greater success.  This figure comes from that line.  It’s not the first figure I’ve taken a look at from this line, but the first figure was actually Captain America, so I didn’t really discuss it much at length.

Once the line proper had proved to be a hit, ToyBiz teamed up with BJs Wholesalers to have several exclusive boxed sets, consisting mostly of repaints, and based around certain themes.  Today’s figure comes from one of those sets.

THE FIGURE ITSELF

This figure was released as part of a 6 pack of figures, all based on the Clone Saga, which was going on in the comics at the time.  The figure depicts Peter in his Spider-Man costume, sans mask.  I guess he took his mask off a lot in the story?  I must confess, I haven’t actually read the Clone Saga, so I wouldn’t know.  I’m not opposed to having an unmasked Spider-Man, whatever the reasoning, so I’m not complaining.  The figure stands about 5 inches tall and features 11 points of articulation, which was pretty good for the time.  The figure was made from completely reused parts:  The head comes from the Spider-Man line’s version of Peter Parker, and the body is the same one used on Mutant X’s The Fallen.  It’s a body ToyBiz was fond of reusing.  It’s not bad, though it is a bit scrawny, especially in the lower arms.  The head was pretty nice.  It’s based on his look on the cartoon, which it emulates well.  Peter’s  paintwork is decent, not amazing.  Mine has some wear on the webbing from minor play and such.  As far as I recall, he included no accessories.

THE ME HALF OF THE EQUATION

So, I’m going to give a shout out to my friend Pat Sponaugle, who follows this blog. This figure, as well as the rest of the set he was included in, was a Christmas gift from Pat way back when!  Thanks Pat!

Overall, he’s actually a pretty neat figure.  Perhaps not the greatest Spider-Man ever, but still pretty cool.  I have fond memories of getting this figure and adding it to my, at the time much smaller, collection.  I think this was the rough start time of me becoming the kid for whom everyone just bought whatever action figures they could find during the holiday season.

#0169: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CAPTAIN AMERICA

SPIDER-MAN: THE ANIMATED SERIES (TOYBIZ)

By the time this review is posted, I will have seen Captain America: The Winter Soldier.  I’m hoping that I love it as much as I am expecting to, but I’ll just have to wait and see (EDIT: I saw it!  It was amazing.  Go check it out!).  In the meantime, to celebrate the release of the movie, I’ll be taking a look at my very first Captain America action figure.  Back before Cap was the household name he is now, the only way to get a Cap figure was in the tie-in line to the Spider-Man cartoon, of all places.  Cap had just made an appearance on the show, so Toybiz was gracious enough to put him in the eighth series of the line, dubbed Electro-Spark.  How does the figure hold up almost 20 years later? Let’s find out!

THE FIGURE ITSELF

The Spider-Man line was 5 inch scale, but Cap was a big guy, standing almost 6 inches tall and featuring 9 points of articulation.  Toybiz seemed intent on depicting Cap as quite the hulking figure (not that one).  He’s so big, it’s almost like his super-soldier serum took super-soldier serum.  This was not a Cap you wanted to mess with!  The sculpt had some nice touches, particularly the scale texture on Cap’s torso, which is simple, but very effective.  The gloves and boots also show a nice level of detail.  There’s lots of folds and creases, making them stand out nicely.  The face depicts Cap in a very angry state, which wouldn’t be my first go to for the character, but it was the 90s.  Everybody gritted their teeth like that.  The paint work on Cap was simple, but it fits with the time, and it was fairly cleanly applied.  I quite like the stylizing of the “A” on the forehead.  Cap included his mighty shield, though this is probably my biggest issue with the figure.  The shield was reworked to give it some sort of light-up feature, which means it’s really small and like an inch thick. Plus, the star’s not even the right color!

THE ME HALF OF THE EQUATION

As I mentioned in the intro, Cap was my very first figure of the character.  It was also the only version available for a few years, so this is what I had to live with.  The figure is probably one of the most dated sculpts of the old Spider-Man line, but I can’t help but love it.  I guess I just got used to what I had.  AS a kid, there was no thrill like getting to watch my VHS copies of the Ruby-Spears Captain America cartoon while holding this figure.

Read the Flashback Friday Figure Addendum for this guy here!

#0163: Plastic Man

Posted by Ethan Wilson in Reviews and tagged with , , , ,

PLASTIC MAN

JLA (KENNER)

Plasticman

If there’s one super power that has a tendency to be underestimated, it’s shape-shifting, particularly of the stretching type. Mister Fantastic, arguably the most famous “stretchy” character out there often has that part of his talents down played to focus on his high-level intellect. I’ve always felt that was a shame. I love stretchy characters because I think they have a lot of potential for creativity on the part of the writer/artist. They’re just a whole lot of fun! In fact, one of my favorite characters of all time is the Elongated Man. He’s not the character I’m looking at today, but he almost would have been, had it not been for the fact that Julie Schwartz, one of the guys behind the creation of Elongated Man (and so many other Silver Age DC characters, but that’s more for a later time), didn’t remember that DC owned the name Plastic Man. Granted, EM would have still be the same character, just with Plastic Man’s name, similar to the Hal Jordan Green Lantern and the Barry Allen Flash. I’m getting a bit off topic, aren’t I?

For those of you who don’t know, Plastic Man is Eel O’Brien, a one-time crook who gets doused by a strange chemical and left behind by his gang during a heist. When he awakes, he discovers he has the ability to stretch his body into impossible shapes. He decides to use this power to bring his old partners to justice and creates the identity of Plastic Man. He was big in the 40s, but faded into obscurity until around the 80s, where he saw a bit of a resurgence in popularity, eventually leading to him joining the Justice League of America during Grant Morison’s run on the series in the 90s. But, what of the figure?

THE FIGURE ITSELF

Plas was released in the 3rd series of Kenner’s JLA series. JLA was a line of figures exclusive to KB toys in the late 90s. They were made using retooled molds from Kenner’s Total Justice line from a few years previous. Plas’s inclusion in the line makes sense given his place on the titular team at the time. Plas has 5 points of articulation and stands about 7 inches tall with his neck fully extended. The line was in 5 inch scale, so he fits right in. The line used a few common pieces for certain figures, and Plas features the generic male torso, used by a few of the figures. The rest of the figure’s sculpt is unique. It all works together pretty well, though I can’t help but feel that the re-used torso looks a bit too stubby in comparison to the rest of the figure. The head and arms are cast in rubber with wires running through them, allowing you to pose the arms and neck in a variety of ways. The paint is passable. It’s fairly basic, but that fits with the rest of the line. The biggest issue with the paint is that it had some peeling issues on the rubber pieces, particularly the white on his goggles and teeth, which is almost gone on my figure. The hands have also suffered from some noticeable yellowing. Sadly, these are both issues of working with rubbery materials. I don’t know that anything could have been done to prevent them. Plas included a JLA logo stand, in red I believe.

THE ME HALF OF THE EQUATION

I got Plas from the KB Toy outlet in the town where my family vacationed. I know I had seen the figure before, and had been interested in getting it, but I never did. My parents bought him and another JLA figure (I believe it was Impulse) for me, which was pretty cool. It’s actually not a bad figure, though it sadly did suffer from a few issues over time. I’d be curious if a Plas who had less playtime might have come out unscathed.

#0161: Luke Skywalker – Dagobah

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LUKE SKYWALKER – DAGOBAH

STAR WARS: POWER OF THE FORCE II

So, today’s review is actually pretty nifty. I’ve looked at the most recent round of Star Wars toys with The Black Series, and I’ve also taken a look at one of the vintage figures from the original line, but I’ve never really looked at any of the figures released in between.

Star Wars is looked at as one of the permanent fixtures of the action figure aisle nowadays, but that wasn’t always the case. Following Return of the Jedi, the line shifted to Power of the Force for a little while, but that line only ran until 1985, at which point Star Wars toys effectively ended. Ten years later, Kenner relaunched the line under the branding Power of the Force II. In 1995, I was 3 and just getting into action figures. So, POTF II came at just the perfect time and provided me with my very first Star Wars figure, which I’ll be looking at in this review.

THE FIGURE ITSELF

Luke was released as part of the 1996 assortment of Power of The Force II. He’s based on Luke’s look while he’s training on Dagobah in Empire Strikes Back. The figure stands about 3 ¾ inches tall, and features 6 points of articulation. That waist articulation was revolutionary, let me tell you. The sculpts for POTF II, in general, have not aged well. For some reason, everybody got really buff. Luke follows that trend, and looks more like Arnold Schwarzenegger than Mark Hamill. From a purely aesthetic stand point, it’s actually not a bad sculpt. There’s some nice texture on his clothing, and the proportions are about right, even if they don’t belong to Mark Hamill. One negative point: the feet are sculpted at a bit of an angle, which can make getting him to stand up a chore. The paint is actually very good for the time. There’s no bleed over or slop and the smaller details are all clean and sharp, and the shading on the shirt to show it’s wet and stained gives the figure a nice level of depth rarely seen on figures of this era. Luke was packed with a lightsaber and a blaster.

THE ME HALF OF THE EQUATION

The trip on which I acquired this figure is actually one of my earlier memories of going to the store and buying something. I don’t remember what store it was (for some reason my gut says Target, but that doesn’t seem right). What I very vividly remember was being walked over to the toy aisle by my parents, seeing the display of figures and running to them. I saw Luke hanging there and immediately grabbed him. In particular, I remember my mind being completely blown by the idea that he actually included a lightsaber. I guess I just assumed that would have to be a separate purchase. I had yet to pick up on how action figures worked, I guess. Regardless, I was thrilled to have this figure. As the years have gone by, the figure has started to show its age, but I still feel pretty damned nostalgic for him. All in all, he’s not a bad figure, and the sentimental value pushes him up to 11.

#0156: Hive Wars Predator

Posted by Ethan Wilson in Reviews and tagged with , , ,

HIVE WARS PREDATOR

PREDATORS (NECA)

I’ve looked at NECA figures before.  Most notably, they’re responsible for the current Aliens line, which I love!  I’ve yet to look at the line that really put them on the map, which was their very impressive Predator line.

HiveWarsBoxed2HiveWarsBoxed1Initially, the line started as a tie-in to the 2010 Predators, and was just the characters from that movie.  However, NECA ultimately transitioned the line into one based on all the movies in the Predator series.  This led to quite a bit of success, but there are only so many Predators in the movies, so as the line continues, NECA has to go to some different sources for figures.  Most recently, they’ve turned to taking designs from the Kenner Predator toyline from the 90s, which proves for some … different designs.  I’ll be looking at one of those figures today.

I don’t tend to mention packaging in my reviews, but I feel this one deserves a mention.  NECA’s gone to great lengths to recreate the original Kenner packaging, down to doing their own logo in a more Kenner style.  It’s really cool and almost made me think twice about opening the figure.

THE FIGURE ITSELF

The Hive Wars Predator was released in the 10th series of the Predators line.  He’s actually based on the sole predator released in the Aliens: Hive Wars line released in ’98 by Kenner.  There he was just called “Warrior Predator”, but seeing as that’s not the most distinctive name, NECA’s gone for more of a tribute to where he originally appeared.  H.W. Predator here stands about 8 inches tall and features 24 points of articulation.  Part of the idea behind the Kenner waves was that NECA could do some part reuse, but H.W. still has a new head, forearms, and calves, at the very least, possibly new hands as well, but I’m not versed enough in the Predator line to know for sure.  The figure seems to share he reused parts with the most recent release of the Jungle Hunter (Predator from the first movie for those of you not in the know), which works pretty well.  The new pieces are all very well handled, with lots of really great details.  I particularly like the arm blades and how much larger they are than any of the movie Predator’s.  The paint is perhaps the most essential piece here.  The unique color schemes are what really set the Kenner figures apart.  In H.W.’s case, that means a whole lot of blue.  It certainly makes him stand out from the rest of the line, as blue is a rare color amongst Predators.  The paint is pretty clean overall, with a decent amount of washes to bring out the sculpted details.  H.W. is armed with a shoulder cannon, which is a reuse from the Jungle Hunter and a brand new spear thing, which is very well done.

THE ME HALF OF THE EQUATION

When I got into NECA’s Predator line, I picked up Dutch and the basic Jungle Hunter. And that was all I was going to get.  Then, I figured it wouldn’t hurt to get the City Hunter from Predator 2, so I got that one, but that was definitely it!  No way was I getting any more Predators.  I just didn’t need them.  I wasn’t going to falter on this one.

So, then I picked up this guy.  Yeah, it was a moment of weakness, but in my defense, he’s not technically a Predator figure.  He’s actually an Aliens figure.  And so far, I’ve been a completist of NECA’s Aliens stuff, so I certainly couldn’t pass this figure up in good conscience.  Yeah, that’s what I’m going with….

#0154: Banshee

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BANSHEE

X-MEN (TOYBIZ)

Today we’ll be jumping back to the 90s with another look at the juggernaut that was ToyBiz’s X-Men line.  I’ll be jumping way back to the beginning of the line for this one, and looking at Banshee!

For the uniformed, Banshee was a mutant with the power of sonic screams, which also allowed him to fly.  He initially started out as an X-Men villain, but it was discovered in his first appearance that he was being manipulated by a greater foe.  He rebelled and become one of the X-Men’s allies.  When the original X-Men were thought to have been killed in Giant Size X-Men #1, Banshee was brought in to join the All-New, All-Different X-men, and was a member of the team on and off for several years.  He’s been dead for a while in the comics, but he did recently appear in the movie version of X-Men: First Class.

THE FIGURE ITSELF

Banshee was released as part of the 2nd wave of figures in ToyBiz’s X-Men line.  He’s based on the character’s Jim Lee-designed uniform that the character was sporting at the time.  The figure stands about 5 inches tall and features 7 points of articulation.  Sadly, the shoulder articulation is similar to the ToyBiz Black Bolt, moving up and down instead of forward and back.  I get what they were going for with the look, wanting him to be able to outstretch the wings, but I feel like it could have been done a bit better.  The sculpt is pretty good overall, and is on par to the rest of the figures in the line at the time.   Incidentally, I believe this is the only figure of Banshee to not depict him mid-scream, which does give it some added value.   One annoying thing, however, is the gaping hole in the front of the torso and the big freaking tube sticking out of his back to allow for his “scream action-feature.”  Essentially, the figure’s got a whistle in the chest to simulate his powers.  It’s a neat idea in concept, but it doesn’t really work out too well in practice.  The paint on the figure isn’t bad for the time, although it does have a few spots of slop.

THE ME HALF OF THE EQUATION

I got this figure from my local comic book store, Cosmic Comix, during one of his winter sales quite a few years ago.  I recall my cousin owning one, and really wanting my own, so I was pretty happy to get the figure.  It’s not a bad figure by any means, but there were better Banshee figures to come (Though not many…).  Some of the 90s X-Men figures still hold up today, but this one kinda shows its age.

#0146: Cyclops

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CYCLOPS

MARVEL UNIVERSE

We’re taking another one day break from Minimates because I don’t want to get too monotonous here.  I’ll be taking another look at Hasbro’s 3 ¾ inch Marvel line, Marvel Universe.  It’s a bit surprising to me that the only Marvel Universe reviews I’ve done so far are X-Men related because the majority of my MU collection is Avengers –related figures.  Oh well.

Today’s figure is a version of the X-Men’s field leader Cyclops!

THE FIGURE ITSELF

This figure was released as part of the 13th wave of the Marvel Universe line.  He’s based on Cyclops’s Jim Lee-designed look from the 90s.  It’s one of those costumes where I know, deep down, that it’s not a good design, but I’ve got a huge bunch of nostalgia for it.  Thanks a lot 90s X-Men cartoon!  Cyclops stands about 4 inches tall and has 29 points of articulation.  He’s built on the later base male body.  This is in his favor, as this body was sculpted after they realized their first few body’s totally sucked.  The figure features a uniquely sculpted head, belt/bandolier, leg straps (upper and lower), wrist straps, and hands.  The head is my favorite part, perfectly capturing Cyke’s 90s look, and the straps and pouches perfectly punctuate that this was definitely a 90s design.  The paint is pretty good overall, though the hair line is a bit sloppy, and I do wish they had molded the ankle joints in yellow.  Why blue, Hasbro?  That’s just silly!

THE ME HALF OF THE EQUATION

Like I said in the review, I really like this design, as terrible as it is.  This was the version I had a toy of when I was 5.  This is the version on all those worn out VHS tapes I had.  There’s some serious nostalgia there.  So, I was really happy when it was announced that this look would be appearing in Marvel Universe.  Plus, when I finally found one, Target was running a Buy-One-Get-One-Free sale on Marvel Universe figures, so I got him and a whole bunch of others!

#0126: Angel – Savage Land

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ANGEL – SAVAGE LAND

MARVEL 10-INCH (TOYBIZ)

Okay, so I’m currently attempting to stay on top of work and school, while at the same time doing my best not to miss posting any updates.  As such, the next few reviews may be a bit more on the brief side.  Hope nobody is offended.  If you are…ummm…I’m sorry?

Today, I’ll be doing my second review from ToyBiz’s line of 10-inch scaled marvel figures.  For those of you who missed my previous review, quick little backstory: in the 90s, ToyBiz had a rather expansive line of 5 inch scaled Marvel stuff.  They decided to double their profits by up-scaling a bunch of the molds and releasing them as 10-inch scale.  Towards the end of this line, they actually started mixing up some of the pieces to get some new concoctions and character designs.  I’ll be looking at one of the later additions: Savage Land Angel.

THE FIGURE ITSELF

Angel was released towards the end of the line, after it had become an exclusive to KB Toys.  He stands 10 inches tall, and features 13 points of articulation.  The figure, coming from the end of the line is completely built from previously used parts.  The head comes from the second Archangel figure, released in the Invasion series of  ToyBiz’s X-Men line.  The body is reused from The Vulture, who was released as part of the 90s Spider-Man line.  The head is sensible, given that it’s the same character, but I’ve never been the biggest fan of this sculpt, with its odd expression and wide eyes.  My issues are only amplified with the larger scale and normal flesh tone coloring.  The body is an interesting choice, I suppose, but given that is was the overly armored 90s Vulture, it means that Angel is left wearing this odd armor.  The paint is a bit of a mixed bag.  The head actually has some pretty decent work, and the shading on the armor is nice, but the costume under the armor looks a bit strange.  They seem to have tried to replicate the look of the previous Savage Land Angel, with his classic costume torn up.  However, while that figure had  bare feet, that wasn’t an option, as those pieces weren’t tooled for the large scale, which means that he’s got these weird painted on boots. Which look very strange with the shorts look, like he’s perpetually that nerdy guy who wears shorts with dress shoes and socks.  It’s weird.

THE ME HALF OF THE EQUATION

I’ve mentioned before how much I enjoyed the 10 inch line, and how I practically got a new one every time I went into a KB Toys.  Not this guy.  This guy, I passed up more times than I can remember, mostly based on how damned creepy he looks.  I’ve mentioned before about the trip I took to that huge KB Toys outlet center, which had a 5-10 year back log of toys.  This guy was amongst them, and I finally decided to get him to round out my X-Men.  I still think he’s a bit odd, but, he’s not the worst thing ever.

#0111: Obi Wan Kenobi

Posted by Ethan Wilson in Reviews and tagged with , , , ,

OBI WAN KENOBI — JEDI DUEL

STAR WARS: EPISODE I (HASBRO)

Ah, yes, The Phantom Menace.  What a thing that was.  Has any other movie simultaneously brought back and killed a beloved franchise?  Oddly enough, even though I don’t particularly care for it, it’s the only of the prequel trilogy that I can stand at all these days.  Sure, it’s total crap, but it didn’t put me to sleep or make my brain hurt too much like the other two.  Plus, it did actually have some pretty good performances by Liam Neeson and Ewan McGreggor.  So, it wasn’t all bad I suppose. Just mostly…

Regardless of opinions of the film itself, the toys were a pretty big hit, and they aren’t terrible.  So, today I’ll be looking at the basic figure of Ewan McGreggor’s young Obi Wan Kenobi.

THE FIGURE ITSELF

Obi-Wan was released as part of the initial wave of figures released by Hasbro to coincide with the release of the movie.  Obi Wan is based on his look during his and Qui Gon’s final battle with Darth Maul.  The figure stands 3 3/4 inches tall and features 10 points of articulation.  The articulation is important to note, as this was probably the most articulation ever to be seen on a Star Wars figure at the time.  Until Revenge of the Sith came along, this was the new standard.  The sculpt on the figure is pretty decent, not perfect, but a nice approximation of what Obi Wan looked like in the movie.  While I understand the decision to sculpt the arms bent to hold the lightsaber two-handed, it does leave the sculpt looking a bit odd if he isn’t holding the saber.  The torso also suffers from being a bit boxy, even for the time.  The paint is serviceable.  Nothing spectacular, but pretty good in general.  The lines on the boots are a bit fuzzy, but everything else is pretty clean.  Mine have long since been lost, but when he was new, Obi Wan included his lightsaber and a “comm-tech” display stand that would play some of Obi Wan’s dialogue from the movie when hooked into the big comm-tech player you could buy. [EDIT–I actually found all of his parts for his Flashback Friday Figure Addendum!]

THE ME HALF OF THE EQUATION

While Phantom Menace is far from one of my favorite movies, I was 7 at the time of its release, and I was willing to overlook most of its flaws because it was a new Star Wars movie.  I rushed right from the theatre to get an Obi Wan figure (Which was $2.99, by the way.  That’d cost you $10 now…), and I was very happy to have him.