Monthly Archives: September 2016

#1054: FA-4

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FA-4

STAR WARS: LEGACY

fa42

So, I gave Star Trek its due, why not the other “Star” franchise?  Regular readers of the site will no doubt be aware of my less than stellar opinion of the three Star Wars prequels.  That said, regular readers will also be very likely to know that I don’t hate everything that came out of those movies.  Generally, it’s the stuff at the forefront of the screen that I don’t so much care for.  That stuff in the background?  Usually pretty cool.  Case in point: FA-4, the subject of today’s review.  Most people have no clue who this guy is.  Heck, I had no clue who this was, at least prior to purchasing this figure.  As it turns out, he’s the pilot of Count Dooku’s ship at the end of Attack of the Clones.  Far from a pivotal role, but literally everyone in Star Wars gets an action figure at some point.

THE FIGURE ITSELF

fa43FA-4 was part of the final “Droid Factory” series of the Star Wars: Legacy line.  Due to the move to The Black Series in 2013, the series was put on indefinite hold, until Amazon decided to pick it up as an exclusive item.  FA-4 was originally intended to be one of the Build-A-Droids, but was made into a single release figure instead when a few assortments were combined to form this last series.  The figure stands about 3 inches tall and he has 8 points of articulation, which is pretty good for the design.  The sculpt on this figure looks to be unique.  It’s quite nice, though it appears some liberties have been taken to make the design just a touch sturdier.  While I personally find it enhances the design, sticklers for screen accuracy might be a little letdown.  While FA-4 was a pretty basic design, the sculpt still manages to work in some cool small details, especially around there areas of the joints.  FA-4’s paintwork is quite nicely handled.  He’s molded in a basic gunmetal grey, with bronze accents, which look really sharp.  Despite his duller palette, I think he still manages to stand out.  FA-4’s only accessory is TC-70’s torso piece.  I’m not really planning on finishing him, so it doesn’t do a whole lot for me, but I can’t really think of much else FA-4 could have included.

THE ME HALF OF THE EQUATION

FA-4 was purchased for me by my Super Awesome Girlfriend, back in July.  He has the distinction of being the last figure that I purchased from All Time Toys prior to the Ellicott City Main Street flood, which has closed down them and several other businesses for at least the next few months.  With that in mind, this figure has quite a bit of weight to bear.  Fortunately, I think he delivers.  He’s a really fun, unique figure, who’s been made all the more special for me.

#1053: Juggernaut

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

JUGGERNAUT

MARVEL LEGENDS SERIES (HASBRO)

juggernauthas1

We now return you to your regularly scheduled programming…

I’m sure those of you who were anxiously awaiting the final figure from my recent X-Men Legends reviews were quite put out with yesterday’s Star Trek-themed review.  Or maybe you weren’t.  You probably weren’t.  Regardless, we’re back with the X-Men today, taking a look at the latest X-Men-themed Build-A-Figure, the unstoppable Juggernaut!

THE FIGURE ITSELF

juggernauthas2Juggernaut is, unsurprisingly, the Build-A-Figure for the Juggernaut series of Marvel Legends, which has started hitting stores in the last month or so.  This is Juggernaut’s second Legends figure, and his first since way back in Series 6 of Toy Biz’s run with the line*.  Like that figure, this guy is sporting his classic attire, which makes sense.  None of his other designs have really caught on the same way.  The figure stands about 9 1/2 inches tall and he has 28 points of articulation.  Juggernaut is one of the largest of the more recent, dwarfing everyone but the Hulkbuster B-a-F.  He’s built on a body that hasn’t seen use before, but I feel almost certain will see re-use down the line.  In many ways, the construction of this figure is quite similar to Hasbro’s Marvel Universe Juggernaut from several years ago.  That was a very good figure, and by extension, so is this guy.  The build is definitely absurdly large, but appropriately so for Juggernaut.  While most of the figure is fairly smooth and clean, the armored bits, belt, and boots all feature some pretty awesome texture juggernauthas3work, which makes him look suitably worn-in, which definitely works for the character.  The helmet and head are separate pieces, but they are glued together, and the head is just the face and jaw, so it’s not meant to be removed, which is one of two minor issues I have with the figure.  The other is the facial features on the underlying face.  They’re alright, but the eyes feel just a touch too far apart, especially compared to the size of the mouth.  It’s not immediately apparent, though, and it’s not like he’s never been drawn that way in the comics.  The paintwork on Juggernaut is pretty decent.  It’s mostly pretty basic, but mostly pretty clean.  There’s a bit of extra detailing on the armored parts, which helps to accent the sculpted texturing.  Juggernaut has no accessories, but he’s kind of an accessory himself, and he hardly feels like a rip-off, just given the sheer size of the figure.

THE ME HALF OF THE EQUATION

If you follow the site, you should have a good idea of where Juggernaut came from; he was pieced together from the parts included with all those X-Men Legends I worked so hard to find.  Despite how hard I was looking for the figures, I think Juggernaut may be the fastest I’ve completed a B-a-F (barring when I buy a complete set online).  I always wanted the Toy Biz Legends Juggernaut, so I’m quite happy to have gotten this guy.

All in all, this has been a fantastic set of Marvel Legends, probably my favorite since the Infinite Series re-launch.  Juggernaut is an awesome Build-A-Figure, and I can’t say I resent having to pick up any of the figures that made him.  In fact, several of the figures here are some of the best Hasbro’s put out.  I hope they can keep up this quality!

*Fun fact:  With the exception of the somewhat tacked-on Thomas Jane Punisher, all of the Series 6 figures (Wolverine, Phoenix, Deadpool, and Juggernaut) received updates in the Juggernaut series.

juggernauthas4

#1052: Classic Star Trek Bridge Crew

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , , ,

KIRK, SPOCK, McCOY, UHURA, SCOTTY, SULU, & CHEKOV

CLASSIC STAR TREK (PLAYMATES)

bridgecrew1

Fifty years ago today, Star Trek premiered its very first episode, “The Man Trap”.  Now, here we are, all these years later, and it’s become a whole lot more than the simple three-season, hour-long  science fiction drama that it started out as.  The franchise has, admittedly, cooled off a bit in terms of popularity, but it’s still kicking, and Paramount and CBS are doing their very best to make sure it doesn’t totally fade away.  This year saw the release of Star Trek Beyond, the franchise’s thirteenth film (which was AWESOME, by the way), which was pretty awesome, and there’s even a new TV series in development. Over the years, there have been quite a few lines of action figures based on the property.  In honor of the franchise’s anniversary, I’ll be taking a look at my real introduction to Star Trek, the Playmates versions of the original bridge crew.

THE FIGURES THEMSELVES

The seven Original Series bridge crew members were released in 1993 as part of a special Bridge Set, which served to launch Playmates’ Classic Star Trek line.  All seven figures were exclusive to this set, though many of the molds would be later used on various single-release figures from later in the line.

KIRK

bridgecrew2Kirk was one of Playmates’ favorite characters to release during their run with the line.  And who can blame them?  He’s one of the signature characters from the series.  This isn’t the first Kirk Playmates released, but he was the first of the classic Kirks, so there’s that.  The figure stands about 4 1/2  inches tall and has 12 points of articulation.  Those were both standard counts for the line, and they hold true on just about all of the figures in this set.  Like almost every figure from Playmates’ Star Trek run, Kirk suffers from the strange V-hips.  I’m not really sure what their purpose is.  I mean, sure, they give him extra movement, but it’s not really good for anything, since even a basic sitting pose is virtually impossible with these hips.  They do allow him to do a fancy jig, so I guess that’s better than nothing.  Kirk’s sculpt is about par for the line, which is to say it’s not anything amazing.  You can tell who he’s supposed to be, but nothing about him is really spot-on.  Most of the details are rather soft and bold.  “Lifelike” is not really a quality this guy possesses.  He almost feels like someone flattened him just a bit, especially on the torso, and the head seems rather large compared to the rest of the figure.  The paint on Kirk is generally pretty basic.  All the colors and such look about right, and most of the application is pretty clean, which is certainly a plus.  On the plus side, the paint on the face is remarkably sharp and well-detailed, which actually does quite a lot to save the figure.  Kirk was packed with a phaser and a communicator, which seem slightly large, but are otherwise very nicely detailed.  He also included a display base, which is patterned after one of the badges, and has the Command symbol to match Kirk.

SPOCK

bridgecrew3Spock was another of Playmates’ favorites.  As perhaps the most recognizable character from the franchise, you kind of expect him the show up a lot.  Like Kirk, this was far from the first figure he had received from Playmates, but it was his first classic figure.  Structurally he’s very similar to Kirk.  He stands a little taller, but he has the same articulation scheme, for better or for worse.  Surprisingly, there are no shared parts between Kirk and Spock.  Spock has been sculpted to be a little thinner than Kirk, which works alright.  He still looks a bit wider then he should, and I can’t say the head has a particularly good Nimoy likeness, but you can see who it’s supposed to be.  Spock’s right hand is sculpted giving the Vulcan salute, which was a nice touch that really gave Spock a nice bit of uniqueness.  Spock’s paintwork is very similar to Kirk’s, which I suppose is good.  The uniform is still very basic, and the face still very nicely detailed.  On the downside, the blue of Spock’s shirt makes the paint wear on the gold sections far more noticeable than it was on Kirk.  Spock also included a communicator and a phaser, as well as a badge-shaped display stand, this time sporting the Science symbol.

McCOY

bridgecrew6McCoy was a far less common character than the other two, but he did still get his fair share of figures.  Which is good, because this guy’s just the best.  McCoy is very similar to the other two figures in terms of structure.  His closer to Spock in terms of height, which is appropriate.  I find that he’s got one of the better sculpts in the set.  He’s still a bit too wide, but his torso feels less flat and more organic than the other two.  In addition, I think his head has one of the better likenesses in the set.  It’s still not spot on, but it’s not awful.  His noggin’s still pretty huge, McCoy’s paint is more of the same.  That’s good from at least a consistency standpoint.  McCoy included the standard phaser and communicator, as well as the display stand, once again with the Science symbol.  It would have been nice to get a tricorder for him, since he’s a doctor and all, but you’ll have to grab that piece from one of the later McCoys.

UHURA

bridgecrew7Here’s where we start to get into the figures that Playmates was a bit more lenient on, though Uhura was far from absent from the line.  Uhura’s probably the most unique figure in this set, being the only female and all.  That being said, apart from the more obvious changes in sculpting, she’s still more of the same in terms of construction.  She has the same articulation scheme and is roughly the same height as the others in this set.  The hard plastic skirt kind of limits the movement on the legs, but that’s really it, and it’s not like it was particularly useful movement anyway.  On the plus side, Uhura probably has the best sculpt in the bunch.  She’s still a little squatter than she should be, but she doesn’t feel as flat and wide as the others in this set, which is a definite point in her favor.  Uhura’s paint is pretty much the same as what we’ve seen on the others, which isn’t bad.  She included the same three extras as the others, though this time the stand had the engineering symbol.

SCOTTY

bridgecrew4I’m givin’ this review all she’s got, Captain, but I think I’m running out of intros for these guys.  Here’s Scotty.  He was the engineer, and he was very Scottish.  This was his third figure from Playmates, but, like the others, it was his first classic figure.  Scotty is noticeably stockier than the others in this set, which actually isn’t too bad, because it means his head doesn’t look quite as out of scale.  He’s also got a pretty decent likeness, so that’s a plus.  The paint is similar to the others, though the red does help him stand out a bit.  He had the same phaser, communicator, and stand (once again with the Engineering symbol).

SULU

bridgecrew8Oh my!  It’s Sulu.  After getting totally overlooked by Mego, this was Sulu’s second figure from Playmates, though it was the first one that a lot of people were able to find.  He’s very similar to the other figures.  Still no re-used parts, which is actually kind of surprising, but good for them.  Sulu gets another of the better likenesses.  It’s still far from perfect, but you can definitely see some of George Takei in there.  The paint’s more or less the same as the others, which is kind of expected six figures into this review, as is the accessory selection, which includes the same three extras as the others.

CHEKOV

bridgecrew5Like Sulu, Chekov was totally left out of Mego’s selection of figures.  What’s more, despite being one of the three original series cast members included in the Generations line, he was really hard to find, meaning this was the first chance that most people had to get a Chekov.  That’s a pretty big deal.  The figure is probably the weakest in the set, if I’m honest.  The head is absolutely huge, and the hair looks totally fake (even more fake than it should…).  He also doesn’t have the greatest likeness (and mine’s even got a chip missing from his chin).  At the very least, the paint is still pretty good, so he’s got that going for him.

THE ME HALF OF THE EQUATION

This set was a gift, I’m pretty sure from my parents, for either my birthday or Christmas.  I know my dad had one of these first, and I really liked it, so he and my mom made sure that I had one of my own.  I think I still have the actual bridge diorama they were packed in somewhere as well.  That thing got some pretty serious play time.  What I don’t have is my original Uhura figure.  She went missing not long after I got the set.  It was only in the last few years that I got a replacement, courtesy of family friend (and Star Trek author and script writer) Howie Weinstein.  There’s no denying that my love of this set is mostly based around nostalgia.  The figures are hardly on par with even the figures being released alongside them.  That said, it was the first time the whole crew had ever been available, and that’s pretty awesome in and of itself.

#1051: Marvel’s Rogue

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MARVEL’S ROGUE

MARVEL LEGENDS SERIES (HASBRO)

roguehas1

 

“With just one touch, Rogue can absorb anyone’s superpowers – making her capabilities in any matchup nearly limitless.”

Here she is. The one that started it all (No, not the whole X-Men thing; that had been going for a good twenty years before she came along.)  Back at SDCC last year, Hasbro showed off their Red Onslaught prototype. This was immediately followed by questions of whether or not he’d be getting a regular Onslaught head. Hasbro said not in the same series, but that they were working on a solution. A few months later, at New York Comic Con, this figure showed up in the display case, with an Onslaught head beside her. Was she part of the Captain America series? Would she be some sort of exclusive? Or, was it possible that she was just the first piece of an entire series? Well, if you’ve been following the site for the last week, you know which one it was. Now, just under a year later, the Rogue figure is here (so’s the Onslaught piece, but that ended up elsewhere). Let’s see how she turned out!

THE FIGURE ITSELF

roguehas2Rogue (who, like Havok and Phoenix before her, gets the “Marvel’s” possessive added to her name) is figure 5 in the Juggernaut series of Hasbro’s Marvel Legends. This is only Rogue’s second time as a Marvel Legend, following the X-Men Legends boxed set version from more than a decade ago. How we went that long without getting a single Rogue* is beyond me. This Rogue uses the same Jim Lee design as the last Legends Rogue. It’s kind of her signature look, and it was very much in need of an update. The figure stands about 6 ¼ inches tall and she has 26 points of articulation. Rogue is built on the Moonstone body, which, in addition to being a good fit for the character is also just an a pretty decent base body (aside from a few minor issues). The figure gets a new head and upper arms, as well as add-ons for her jacket, belt, and the cuffs to her gloves and boots. Her construction is in many ways quite similar to the Marvel Universe Rogue (which I reviewed waaaaaaaaay back in 2013), but the increased scale makes the add-on pieces mesh a bit better this time around. One of the main roguehas3issues with prior Rogue figures was that her face always seemed to end up looking…less than stellar. Like Scarlet Witch, her Toy Biz figure suffered from rather mannish facial features. This figure doesn’t fall victim to this issue, and ends up being one of the best looking Rogue figures to date. The sculpted jacket is also a marked improvement over the pleather jacket from the Toy Biz version. The only real issue I have with the sculpt isn’t the sculpt proper, but the assembly of my figure: she has two left upper arms. It’s an annoyance, but it could be a lot worse. Overall, Rogue’s paintwork is pretty decent. There are a few minor spots of errant paint, but it’s mostly pretty sharp. It’s also really bold and pleasant to look at. I’m really digging all the warm bright colors in this series. Rogue included an extra, un-gloved right hand (which is a really fun piece to have), and the left leg of Juggernaut.

THE ME HALF OF THE EQUATION

Rogue was the figure I was most anticipating from the series. Of course, she was the figure a lot of other people were anticipating too, meaning she was the most difficult of the seven figures to obtain. I actually found the packaging for this figure a month or so back, but some dipstick had swapped out the Rogue figure inside for the old X-Men Legends version, which was a serious let down. After searching for a few weeks, I ended up just sort of stumbling upon Rogue last week during a quick stop-in at my nearest TRU. I’m really happy to have found this figure, and she’s definitely one of my favorites from the set. I can’t wait to get some more Jim Lee X-Men to go with her!

*Hasbro had planned to release a more modern Rogue as part of the Puck Series of Marvel Legends that tied into The Wolverine, but when that assortment was moved to specialty, she was bumped from the line-up.

roguehas4

#1050: Cable

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CABLE

MARVEL LEGENDS SERIES (HASBRO)

CableHas1

“A lifelong soldier, Cable perfected his fighting prowess when a technological virus suppressed his natural psychic abilities”

Wow, that’s definitely a streamlined version of Cable’s background. I guess “son of Cyclops and the clone of Jean Grey who was kidnapped, sent to the future, contracted a deadly made up disease, was raised by his father and the non-clone Jean Grey’s consciousnesses transported into two unrelated bodies in the future, who came back in time to just after he was originally kidnapped, and who may or may not actually be a clone” was just too much for the non-comics-reading fans. It might scare them away! Despite his complicated backstory, he’s a pretty straightforward ’90s anti-hero. He’s had a number of figures throughout his career (most of them are from the ’90s), but it’s been a few years. Fortunately, Hasbro’s seen fit to give him a brand new figure!

THE FIGURE ITSELF

CableHas2Cable is figure 7 in the Juggernaut series of Marvel Legends. This is Cable’s fourth time as a Legend (counting the paint variant from Series 6). The last one was way back in 2007, as part of a Walmart exclusive two-pack, so this one’s long overdue. He’s based on his Ed McGuinness-designed look from Avengers: X-Sanction. It’s a bit of an oddball choice, but it is the book that brought Cable back following his death during “Second Coming.” It’s not a bad look (even if it lacks shoulder pads…), and it fits pretty well with the rest of the series of figures. The figure is a little over 7 inches tall and he has 29 points of articulation. Of note with the articulation is the inclusion of a ball joint for his mid-torso movement. It’s a lot more poseable than the usual hinge joint, which adds a lot to the playability of the figure. Cable reuses most of Nuke’s legs (he gets a new set of shins), as well as the right arm of the basic Hyperion body. The rest of the figure’s sculpt is new to him. It’s actually very nicely handled. The armor has lots of fun little details (including bullet damage, which is an impressive thing to see on a mass-produced figure), and a ton of great texture work. While this design was exclusively drawn by McGuinness, the sculpt sticks more with the basic style of the line, which makes Cable a bit more versatile than he might be otherwise. The paintwork on Cable isn’t perfect, but it’s pretty solid. Bleed over and slop is minimal, and the colors definitely fit the design. I do wish that the bullet damage were actually painted, but that’s minor. Cable includes two big sci-fi guns. The larger of the two has a removable ammo belt, and is in general my preferred of the pair. Cable also includes the pelvis of Juggernaut.

THE ME HALF OF THE EQUATION

I picked up Cable at the same time as Wolverine. I wasn’t sure if I was going to pick this guy up initially (Cable’s hardly one of my favorite characters), but I kinda wanted to finish Juggernaut. I’m actually really glad I picked him up, because he’s a surprisingly awesome figure. How’d they manage to make a Rob Liefeld character into such a cool figure?

CableHas3

#1049: Wolverine

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WOLVERINE

MARVEL LEGENDS SERIES (HASBRO)

WolvHas1

“Virtually indestructible and always ready for a fight, Wolverine’s specialty is sending bad guys running.”

Well, I’m out of figures to compare to the new X-Men Legends.  Not because the remaining figures aren’t re-dos (because they are), but because I don’t own the originals (shocking, I know).  Today’s focus, Wolverine, is no stranger to action figures.  He’s not even a stranger to Marvel Legends (though he’s been a little more absent as of late).  So, he’s not really anything new.  Except that this might very well be the most anticipated Marvel Legends Wolverine since the very first one.  Because he’s that cool, that’s why.

THE FIGURE ITSELF

WolvHas2Wolverine is figure 1 in the Juggernaut series of Marvel Legends.  He’s the 24th version of Logan to grace the Marvel Legends line.  Wolverine is wearing his brown and yellow costume from the late ‘80s (making its first Legends appearance since way back in Series 6 of Toy Biz’s Legends).  The figure stands just under 6 inches tall and has 34 points of articulation.  One of the big things about this particular Wolverine is that he’s the first Wolverine since very early in Hasbro’s run to get a new body sculpt.  Yes, after over a decade of use, the old Brown Costume Wolverine mold has finally been retired.  Now it’s been replaced by…the Brown Costume Wolverine body.  The more things change, the more they stay the same.  So, how is the new body?  Well, it’s not perfect (what is?), but it’s pretty good.  It does short and stocky very well. I might like it if the arms were just a little more worked into the rest of the sculpt, but they aren’t awful.  Also, the range of motion on a lot of the joints, especially the shoulders is awesome, which is a definite plus. More than any of Hasbro’s base bodies, this one feels specifically tailored to the character premiering it.  I can’t really think of many characters who are built similarly to Wolverine, so I imagine Hasbro’s more thinking of using this for variations of just him.  The character specific elements (the head, hands, boots, and belt) are very nicely sculpted.  The head sits just a touch high on the neck, but it’s otherwise a pretty great sculpt.  It’s a lot cleaner than earlier Legends Wolverines, which I actually quite like, especially since this is supposed to be Wolverine from before he got quite as grungy.  The belt and boots fit well on the body, and both sport some decent texture work.  The hands are the best hands any Wolverine figure has ever gotten, due mostly to the claws being separate pieces, which prevents them from warping.  They aren’t perfect, but they’re very close.  Paint is probably this figure’s weakest part.  It’s not awful, but it’s a bit sloppier than I’d like.  Still, he’s not as bad as some Hasbro figures.  My biggest issue is the mismatched yellow from the hips to the thighs, which just throws the whole figure off.  Overall, though, he looks really cool.  Wolverine was packed with a spare set of hands with the claws retracted, as well as the head for Juggernaut.  The hands are particularly noteworthy, as it makes him one of only two Legends Wolverines to include such a thing, which is surprising, because they’re such a cool, easy to do feature.

THE ME HALF OF THE EQUATION

So, you know how I said this was the start of the reviews where I didn’t have the older figures to compare to?  Well, I actually did at one point own the Toy Biz Brown Costume Wolverine.  For reasons I can’t begin to explain, I sold him, which I’ve greatly regretted ever since.  Because of that, I’ve been greatly anticipating this guy.  I ended up finding him at Toys R Us, without much fanfare, which I was quite happy about.  He’s not a perfect figure, but he’s a very nice one, and one I’m very happy to have.

WolvHas3

#1048: Kitty Pryde

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

KITTY PRYDE

MARVEL LEGENDS SERIES (HASBRO)

KittyPrydeHas1

“With her ability to elude attacks by making herself intangible, Katherine “Kitty” Pryde is a master of defense.”

Remember yesterday when I said that Kitty Pryde hasn’t had much luck with action figures?  Well, that changes today, with my review of the latest attempt at a Kitty Pryde figure.  Full disclosure: I really like this figure.

THE FIGURE ITSELF

KittyPrydeHas2Kitty Pryde is figure — in the Juggernaut series of Marvel Legends.  This marks Kitty’s second Legend, following the travesty we looked at yesterday.  This Kitty figure is based on her more recent appearances from after the time Magneto retrieved her from the giant space bullet she had to bond herself with to save the world from ancient alien mutants…it’s a long story.  The look isn’t much different from her Astonishing look, and I quite like it. It’s definitely a strong choice.  The figure is about 6 inches tall and she has 27 points of articulation.  Kitty is built on the same basic body as Phoenix, which I’m definitely okay with.  She gets unique pieces for her head, upper torso, and forearms, as well as an add-on piece for her belt.  She also has flat-soled feet, which I much prefer to the high-heels on Phoenix.  All of the new pieces exhibit very clean sculpting, and fit together seamlessly with the basic pieces.  I particularly like the head.  It’s easily one of Hasbro’s best female sculpts, and it manages to make Kitty look neither too old nor too young, which is a definite improvement over prior attempts.  Now, my figure does have some fairly KittyPrydeHas3present mold lines, especially at the chin, which is a bit annoying.  However, since her head is molded in the correct colored plastic, it’s actually a pretty easy fix, so it doesn’t mar the figure.  The paint on Kitty is pretty decent overall, though there are a few minor issues, with some uncovered spots, and one or two issues of bleed over.  On the plus side, the color scheme on this figure is much better than the Toy Biz figure, which just makes her a more exciting figure all around.  A good yellow can be hard to find, but this one is definitely right.  Kitty includes her pet dragon Lockheed, who can securely sit on her shoulder, as well as the left arm of Juggernaut.  She also includes (or is supposed to, anyway…) the head of Onslaught.  Apparently, the only way that Hasbro was allowed to release a proper Onslaught head for their Red Onslaught B-a-F was to pack it in with an X-Men figure in a completely unrelated set.  Kitty gets the honor of being that figure for…reasons.  I’m not really sure why.

THE ME HALF OF THE EQUATION

I got Kitty from a nearby Walgreens (actually the same one where I got Jean, just a week later). Kitty was the fourth of the new figures I found, and she was a somewhat bittersweet moment.  While I was excited to find her, I quickly noticed that some dipstick had swapped out the Onslaught head for an ASM2 Electro head. I bought her anyway, in part because I wanted the figure more than the piece, and in part because I didn’t want anyone else to get stuck with the mucked up figure.  However, just to prove that most people don’t suck, my Dad picked up another Kitty figure later to get me the Onslaught head, and I was also contacted by my friend Cindy Woods, who offered me the piece that came with her figure.  So, now I have a complete Kitty figure!  Yay!  Honestly, I didn’t know what to expect from Kitty when the series first started hitting, but she may well be my favorite figure in the set!

KittyPrydeHas4

#1047: Kitty Pryde

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

KITTY PRYDE

MARVEL LEGENDS (TOY BIZ)

KittyTB1

Kitty Pryde is really a marker for change in the X-Men comics. She was the first new mutant to be added to the team following the All-New, All-Different change-up, and represents perhaps the only hopeful note to come out of the Dark Phienix Saga. Almost as soon as she joined, she became a focus point for the series. She’s also noteworthy for being one those rare instances of a comic character who was allowed to grow up, as her quest to become a full-fledged X-Man was one of her major story points. And, above all, she’s pretty consistently a fun character. Unfortunately, she’s had some rotten luck with action figures (if you don’t believe me just look at the last Kitty I reviewed). Toy Biz tried their hand at making her twice, with mixed results. I’ll be looking at that second attempt today.

THE FIGURE ITSELF

KittyTB2Kitty Pryde was released in the Walmart-Exclusive Giant-Man series of Toy Biz’s run with Marvel Legends. She was based on Kitty’s then current Astonishing X-Men design. The figure stands a little over 6 inches tall and has 38 points of articulation. For the most part she’s the same figure as the Jessica Alba Invisible Woman that I reviewed a few months ago. That’s not great, because that body had some major issues, including, but not limited to: incredibly obvious joints, an impossibly small waist, and super fragile arms and legs. It’s not a particularly strong body. What’s worse, the details on the body don’t quite line-up with Kitty’s Astonishing design. It’s a weird body choice all around. I’m not really sure why they went with it, but I’m not Toy Biz. I’m also not out of business, so I think that I won this one! Kitty got a new head sculpt, which is okay, but hardly one of Toy Biz’s best.  Like Hasbro’s smaller attempt, she feels a bit old for Kitty, and the total lack of ears weirds me out a bit. Also, her hair is pretty much completely wrong for this interpretation of Kitty, being all around too long and just too bushy. Were it not supposed to be this specific Kitty, that would be fine, but it stands out here. The paint work on Kitty is probably some of the weakest on any of the Toy Biz Legends.  The face is alright, but the eyebrows are slightly off from the sculpt, which throws her whole look off. Also, the color scheme of the costume is totally off. In the comics, her costume was black and a warm shade of yellow. Here, it’s a dark grey/pale yellow combo that looks incredibly boring and drab. It’s not a fun look, and means she’ll tend to get lost in a group. Kitty included her pet dragon Lockheed, as well as the upper torso and head of Giant-Man.

THE ME HALF OF THE EQUATION

I didn’t find this figure at retail, due to the all-around difficultness of finding this series at Walmart. My dad bought her for me from a reasonably priced eBay auction. At the time, I was really excited to get this figure. I mean, she was my first Kitty Pryde figure, and I’ve always loved the character. That being said, I very quickly found the flaws in this figure, and she’s never been one of my favorites. She’s probably one of the older Legends most in need of an update.

KittyTB3

#1046: Iceman

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ICEMAN

MARVEL LEGENDS SERIES (HASBRO)

IcemanHas1a

“Iceman keeps his cool in battle with his ability to turn water to ice and freeze his own body to temperatures below zero.”

Iceman is probably the founding X-Man with the most untapped potential. He’s been with the team longer than anyone barring Cyclops and he’s one of 10 confirmed Omega level mutants (making him one of the more powerful characters in the Marvel universe).  Nevertheless, he’s frequently little more than a prankster, just there to goof off. Which is really a shame, because he’s really a (pardon the pun) cool character. Anyway, he’s at least gotten his fair share of action figures over the years, with his latest being an all-new Marvel Legend, which I’ll be taking a look at today!

THE FIGURE ITSELF

IcemanHas2Iceman is figure 3 in the Juggernaut series of Marvel Legends, which was just released a few weeks ago. This marks Iceman’s third time as a Marvel Legend, following the boxed-set version from two years ago and the single release from Toy Biz back in 2005 (reviewed here). He’s specifically based on Iceman’s Wolverine and the X-Men appearance (the comic, not the show), though he effectively works for any version of Iceman post-early 90s. The figure stands just shy of 6 ½ inches tall and he has 32 points of articulation. Iceman is built on the Pizza Spidey base, which is reasonable, since Iceman’s shared a body with Spider-Man more than once. I’m still not entirely sure how I feel about the body being used for non-Spider-Man characters (the exaggerated proportions work for Spidey, but are off on others), but this body works better for him than any of the other bases currently in Hasbro’s inventory. He gets a new head, forearms, hands, shins, and feet, as well as a clip-on piece for his shoulders. The overall appearance is pretty cool. He certainly captures the look from the comics IcemanHas4well. If I were to get really nitpicky, I might say I’d like for the head and hands to be a touch smaller in scale, but it’s a pretty minor issue. Probably the most pressing issue facing this figure is the soft plastic used for his arms and legs. It makes him a little difficult to keep standing, and can also cause his arms to fall off from time to time. It’s a definite bummer (though, I’ll take rubbery limbs over flat out broken limbs like the Toy Biz version). Paint on this guy is the definition of minimal. There’s some white for his eyes. That’s it. The rest of him is just molded in a semi-transparent plastic with a slight blue tint. I feel like it might actually be a bit too transparent, causing the inner workings of the joints to be a little bit distracting. Iceman has no character specific accessories, just the left arm of the B-A-F Juggernaut. I wouldn’t have minded some sort of ice blast attachment or something, but the actual figure has enough new pieces that he doesn’t feel too light.

THE ME HALF OF THE EQUATION

Iceman was the first figure in this set that I personally found in the store (at a Walmart, to be specific), which was quite exciting, I guess. Of all the figures in the set, my anticipation for this guy was somewhere in the middle. Ultimately, I think he’s the weakest of the set that I’ve picked up so far. To be fair, I do think he’s the best Marvel Legends Iceman available, just due to the last two attempts being even weaker. He’s certainly not a bad figure, and I’m happy to have gotten an update, as the Toy Biz version was looking quite raggedy as of late.

IcemanHas3

#1045: Marvel’s Havok

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MARVEL’S HAVOK

MARVEL LEGENDS SERIES (HASBRO)

HavokNow1

“With control and precision, Havok processes cosmic energy to send plasma waves blasting from his super-charged body.”

After 10 years, my boy Havok’s finally gotten another Marvel Legend! Alright! It’s actually sort of odd timing, really, since he’s been absent from the comics since Axis left him as an “inverted” villain. I guess his presence in this year’s X-Men: Apocalypse made him a good choice. Regardless of the reasoning, I’m just happy to have another Havok figure. Let’s see how he turned out!

THE FIGURE ITSELF

HavokNow2Havok (who, like Phoenix, gets the “Marvel’s” preface) is figure 4 in the Juggernaut series of Marvel Legends. This time around, Havok is sporting his Marvel Now! attire. It’s not my favorite Havok look, but it’s a reasonable choice, since it’s still technically his current costume, and it fits in with all of the other Marvel Now! figures Hasbro’s done since the Infinite Series re-branding. It’s also pretty close to his classic appearance, so he fits in alright with some of the more classically inspired figures. The figure stands about 6 ½ inches tall and has 32 points of articulation. Havok is built on the Bucky Cap body, which is a fair choice. His brother has also been built on this body and the two of them are typically depicted as being about the same build. Also, fun fact: this marks the second time that Havok and Daredevil have been built on the same body (they shared a body in Toy Biz’s 5-inch scale). Havok gets a new head sculpt, which is a pretty nice piece. It’s a much calmer Havok than we usually see on HavokNow4figures, but still in line with his comics depictions. It’s nice to get some variety in his expressions. Havok’s paintwork is overall pretty solid. The colors are nice and bold, and I particularly like the way they handled his chest emblem/power measurement thingy. The faint blue hue makes it look like it’s actually the energy he’s emitting, as opposed to just a tacked on logo. There’s a bit of slop on the edges of the headgear, but nothing too terrible. Havok includes a pair of energy effect pieces that clip onto his wrists and demonstrate his powers. They’re a really cool extra, and help make him a much more dynamic looking figure. Havok also includes the right leg of Juggernaut. It would have been nice to get an unmasked head, since he spent a lot of his Marvel Now! appearances unmasked, but he doesn’t feel particularly light, so I can’t really complain.

THE ME HALF OF THE EQUATION

My parents brought Havok back from a trip they took to Philadelphia a few weekends ago. I was quite excited to get him, since he was one of my most anticipated figures from this set (being my favorite X-Man and all). He’s sort of the reverse of Phoenix, if I’m honest. Where I wasn’t really excited for her and she ended up pleasantly surprising me, Havok here isn’t quite as exciting as I’d hoped. He’s not bad in the slightest bit, mind you, and I’m still thrilled to have him. He’s just not top of the line; more middle of the pack.

*Want a Havok figure of your own?  He’s currently in-stock with our sponsors over at All Time Toys!  Click here to check him out!

HavokNow3