#3004: Grice Anna – 19th Legion United

Posted by Ethan Wilson in Reviews and tagged with , , ,

GRICE ANNA — 19th LEGION UNITED

BATTLE FOR THE STARS (JOYTOY)

Hey, remember when I was talking about Joytoy?  It was, like, three days ago?  Man, wasn’t that cool, and new, and different?  I sure thought so.  How about we give that another go, perhaps?  While the main focus of their output is the cool Mechas, Joytoy actually puts quite a lot of effort into the scale figures that go with said Mechas.  Enough effort that they don’t just want to leave them only available within the larger sets, so they also sell them in a few other ways, including just flat out selling them on their own.  So, today, I’m looking at one of those figures on its own.

THE FIGURE ITSELF

Grice Anna is from Joytoy’s Battle For The Stars line, which, in contrast to the last item I looked at, is actually one of their 1/18 scale lines, meaning the humans are roughly at that 3 3/4 inch mark.  The figure follows suit, standing just shy of 4 inches tall and sporting 32 points of articulation, at least on the base body.  The design also features an exoskeleton sort of brace kind of set-up, which also features some articulation, though mostly its really just in a fashion that allows the underlying figure to still be posed without any trouble.  The articulation on the core figure is a lot like a 30th Anniversary/POC Joe, but even further improved, to the point where there’s even toe articulation, which, at this scale?  Well, that’s pretty impressive.  The joints are also quite well-toleranced, so she’ll be able to hold poses without much trouble, which is always a concern at this scale.  Anna’s design is sort of a merging of modern tactical gear with a little bit of military sci-fi, in keeping with the other stuff Joytoy’s been doing.  The core figure is much more on the realistic modern tactical side, and you could honestly fit her in pretty well with Joes and the like in this state.  She’s got a long sleeve shirt and some combat pants, as well as armoring on the torso, knees, and shins (the shin armor is a separate piece, so you could remove those too if you wanted).  The full armor is comprised of a pair of shoulder pads, an alternate helmeted head, and an exoskeleton that hooks over the wrists and legs, and runs pretty much the whole body.  She’s also got a cool neckerchief, you know, for a little bit of tasteful accessorizing.  Everything slides into place pretty well, although you will need to do a little bit of disassembly of the main body to get everything on there.  My only complaint is that the helmet isn’t actually attached to the alternate head in any way, so it falls off a lot.  Feels to me like it would have made the most sense to just glue it in place, especially since the alternate head foregoes even giving her painted eyes or anything, which winds up looking pretty creepy.  Her paint work is generally pretty nice.  The base work is clean, and she also gets a darker wash on the armored parts, as well as the pants, which helps to not only emphasize the sculpted details, but also to give her a slightly more worn-in appearance, which fits the setting they’re going for.  Anna is packed with two sets of hands with differing grips, as well as an assault rifle and a pistol.

THE ME HALF OF THE EQUATION

I’ve been keeping Tim in the loop on my delve into Joytoy, since he is also big on the cool robots front.  This turned out to be a point in my favor, as his sister-in-law Becca was looking to get me something cool for Christmas this year, and he was able to point me in the direction of this particular figure.  I wasn’t intending to jump down the rabbit hole of the individual figures quite this quickly, but this one’s admittedly really cool.  Sure, she’s not the same scale as the one Mecha I have, but I guess I’ll just have to get a Mecha that scales with her.  Oh darn.

#3003: The Batman Who Laughs – Sky Tyrant Wings

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

THE BATMAN WHO LAUGHS — SKY TYRANT WINGS

DC MULTIVERSE (MCFARLANE)

“Born from the nightmares of the Dark Multiverse, The Batman Who Laughs is a hybrid version of the Batman and The Joker from Earth -22. This twisted version of Batman was created when nanotoxins from The Joker’s heart were released into Bruce Wayne’s bloodstream, causing the Dark Knight’s perfect mind to merge with the warped psyche of the Clown Prince of Crime. He soon became part of an attempt to plunge the entire Multiverse into ultraviolence, chaos, and utter darkness. After being initially defeated, The Batman Who Laughs managed to survive and remains a threat to the greatest heroes of the Multiverse.”

For Day 3 of the post-Christmas, we’re going back to more of my usual territory, specifically the realm of super hero comics.  Even more specifically, DC Comics.  They’re pretty busy doing nothing but Batman these days, and, well, umm, here’s some more of that, I suppose.  The last few years, DC’s bread and butter (and, by extension, their main licensee McFarlane’s bread and butter) has been Dark Knights Metal, a multiversal story where everyone is Batman.  Except for Batman.  Sometimes Batman is Joker.  And here we are with that.

THE FIGURE ITSELF

The Batman Who Laughs with Sky Tyrant Wings is the second version of the Batman Who Laughs to be released in McFarlane’s DC Multiverse line, as part of the Merciless Collect-To-Build assortment, which was released at the tail end of 2020, at least in some quantities, and made it out more fully last year.  The figure stands 7 inches tall and he has 40 points of articulation, thanks to the extra joints present in the wings.  In terms of articulation scheme, he generally follows the usual McFarlane set-up, for better or for worse.  The notable change-up is to the hips, which don’t have the same full range of mobility that we usually see, being far more restricted to just forward and back.  Given the long jacket, it’s not a huge surprise or hinderance, but it’s still noteworthy.  This Batman Who Laughs is based on the character’s later appearance after he steals the wings from the Sky Tyrant, the Dark Knights Metal version of Hawkman.  To give McFarlane some credit, as far as I can tell, there are no shared parts between the two versions of BWL they released.  There are certainly similarities, but this sculpt just generally improves upon the shared elements between the two, making for a generally more well put-together offering, at least to my eyes.  The crazier, more exaggerated facial expression works a lot better for the character, especially in toy-form, and the texture work on the outfit is pretty solid.  McFarlane certainly does torn-up and gritty well.  I also feel that the more posed hands work a lot better for the character than the more generic gripping hands of the prior release.  The most obvious change here, of course, are the wings.  They actually work quite nicely, as they’re well-articulated, well-detailed, and not terribly balanced considering.  It would be nice to see such work on a proper Hawkman, but this is McFarlane, so a Batman variant is really the best we can hope for, I suppose.  The paint work on this figure is generally pretty good.  It’s largely rather basic work, but I think that’s for the best, especially after the weirdness surrounding the accent work on the last figure’s mouth.  It just looked odd, so going a little more straight forward here is probably the right call.  The Batman Who Laughs includes a display stand and a collector’s card for the figure proper, as well as the head, shoulder pads, and sword of the Merciless Build-A-Figure.

THE ME HALF OF THE EQUATION

Dark Knights Metal really isn’t my sort of thing.  It’s honestly a lot of the stuff I don’t like about DC’s current obsession with Batman and the need to constantly place him above all of the other heroes rolled into one big event.  The Batman Who Laughs himself is a concept that I don’t think is terrible, but like the whole cross-over, I kind of feel like he got played out a lot quicker than he went away, and he just sort of keeps resurfacing.  So, I wasn’t seeking this figure out on my own.  That said, I received this one from Jess’s parents for Christmas, and I can certainly appreciate the thought, the gesture, and ultimately the figure proper.  The story that spawned him may not be my main thing, but the figure did turn out pretty nicely, so I can’t really knock it.

#3002: Ultraseven

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ULTRASEVEN

ULTRAMAN (MEGO)

Welcome to Day 2 of the Post-Christmas reviews.  Last year, I finally got back into the swing of some Ultraman reviewing after a bit of a gap, thanks to the help of an Ultraseven figure I got as a Christmas gift.  This year, I guess I’m just gonna do the same thing.  Fitting.  Of course, I’m kind of looking at opposite sides of the product spectrum here, with last year’s Ultraseven being a high-end figure from Bandai, and this one being, well, a Mego, which isn’t exactly high-end.  No less in my realm of interest, of course!

THE FIGURE ITSELF

Ultraseven is part of Mego’s Sci-Fi line, released as one of their mixed assortments of figures.  He’s the second figure under the Ultraman branding, following up on the standard Ultraman from earlier in the line.  Like the rest of the line, the distribution model is via a mix of specialty stores and select Target locations.  The figure stands just over 8 inches tall and he has 16 points of articulation.  Ultraseven is built on the upgraded Type 2 male body.  It’s the standard, and it’s got a nice medium, average build, which suits most characters, Ultraseven included.  Ultraseven gets a new head and hands to complete his look.  They’re pretty solid pieces; certainly a bit on the goofy side, but then classic Ultraseven frequently falls into that category anyway.  The paint work is confined to the head, and it’s pretty basic, but also does what it needs to well.  Application is all pretty clean, and the important details are all there.  Ultraseven’s outfit includes a bodysuit and a pair of short boots.  They do a respectable job of capturing the look of the character from the show, while still fitting the main Mego aesthetic.  I do really like how the printed silver looks on the suit.  Ultraseven includes no accessories, although that’s not a huge shift for the line, especially given their price point.

THE ME HALF OF THE EQUATION

I missed out on the basic Ultraman, so I hadn’t really put much of an effort into getting this one.  Not that I didn’t want him, of course, but I just wasn’t really expecting to find him either.  Fortunately, I didn’t have to worry about that, since Max had my back on this one, and picked this guy up for me as a Christmas gift.  I guess it continues the tradition of getting Ultrasevens from the people I care about for Christmas.  It’s really not a bad tradition, all things considered.  And this is really a fun figure, too.  So, I call it a general win.

#3001: Steel Bone HO2 Firepower Mecha

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

STEEL BONE HO2 FIREPOWER MECHA — GRAY-GREEN

DARK SOURCE (JOYTOY)

It’s a new year, and this intro serves to cover a few bases, really.  First and foremost, faithful readers will no doubt notice that there were two days between this review and #3000.  After writing a review every day of every week for over eight years, I’ve finally arrived at the conclusion that it’s maybe a little much for me.  So, I’ll be stepping back.  Not a ton, mind you, but I’ll at least be taking weekends for the foreseeable future.  But, hey, that’s still five days a week for you guys to read my crazy ramblings, right?  With that out of the way, let’s jump into the first day of my post-Christmas reviews!

More often than not, I tend to stick to more domestic offerings, as well as generally lower-price point options.  Every so often, I do like to branch out just a little bit and try something new.  This year, that’s apparently Joytoy, a company that I was honestly not really familiar with prior to 2021, but who I’ve become rather fascinated with in the last few months.  Hey, I like a cool mecha, and they certainly have a lot of those.  So, I’m looking at my first Joytoy item today, with the Steel Bone HO2 Firepower Mecha!

THE FIGURE ITSELF

The Steel Bone HO2 Firepower Mecha [Gray-green] is part of Joytoy’s Dark Source toyline.  Their various different lines correlate to different themes/storylines, which are really just excuses to more cool robot designs, really.  It also corresponds to a few different scales.  Dark Source is a 1/25 scale line, centered on figures that are about 2 3/4 inches for a standard sized human.  The mechs are, of course, much larger than a standard sized human.  In the case of this one, it stands just shy of 8 3/4 inches tall.  An exact articulation count is a bit tricky on this one, due to how many moving components there are, and how many pieces have to flex out of the way in order to do any real posing.  The limbs can be a bit restricted, especially at the shoulders and hips, but there’s a lot that can be done, especially given how bulky the design is overall.  I especially dig all of the movement in the hands, as the fingers not only get movement at each of the knuckles but there’s also side-to-side movement on the fingers, which adds a lot of extra gripping options, which is pretty cool.  In terms of structure, the Steel Bone design is pretty squared off and rather on the utilitarian design.  It’s certainly meant to be military in nature.  The actual construction of the mech is actually made out of quite a lot of potentially modular pieces.  It comes out of the box in effectively the load out seen in the photos, but there are lots of other possible builds, if you so choose.  It can be a little tricky swapping parts in and out, and finding just the right balance and layout, but it does add a lot more fun to the figure.  In the effort to aid in that modular nature, the mech gets a few deliberately swappable pieces, namely the chest plate and thigh covers, which have an option for slightly more rounded parts.  I myself prefer the alternate parts, so I appreciate them being there.  The mech’s armaments also tie into the modular nature.  Worked into the mech proper are two shoulder mounted mini guns.  They attach with a handful of the modular parts included, but also can be worked in a few different ways, again with the whole modular thing in mind.  Separate from the mech proper, there’s a big hammer.  What’s fun about the hammer is that it’s almost no unique parts; everything is a basic modular piece, or shared with the Mecha’s own construction.  So, again with the modular.  That’s commitment to the concept.

The Steel Bone includes its own pilot, designed to work with it’s built-in cockpit.  He’s about 2 3/4 inches tall and he has 32 points of articulation.  He’s utilitarian and military-inspired in a fashion similar to Mecha, which is sensible.  He works in a lot of rather classic sci-fi psuedo-military type stuff, which makes him suitably generic, but also serves as a nice call back to other designs.  I quite dig the removable helmet, and how well it sits, especially given the scale and how little it impacts the underlying head’s design.  The pilot gets a fun selection of extras himself.  There’s an alternate left hand, two rifles, a pistol, and a medical kit.

THE ME HALF OF THE EQUATION

I’ve been just starting to dip my toes into the waters of Joytoy, and it’s pretty much exclusively the fault of Jason from All Time Toys.  He’s recently decided to give them a try at the store, and we’ve all pretty much been looking for that entry point.  This one’s boxy, green, and he’s got a hammer and miniguns.  He checks off a lot of my boxes.  So, it certainly made things even easier when Jason gave me this guy as my Christmas gift this year.  It’s pretty darn great, really, and a great introduction to Joytoy.  I could foresee this getting a little bit dangerous…

#3000: Captain America – Infinity War

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CAPTAIN AMERICA

AVENGERS: INFINITY WAR (HOT TOYS)

In a turn of events that I suppose is all rather fitting, today, the last day of 2021, also marks my 3000th review here at the site.  Pretty crazy, huh?  I never really foresaw myself making it quite this far, and yet, here I am.  3000 is a very big number, and a bigger number than the the total quantity of figures I had in my collection when I started this thing.  Moreover, I’ve made it all the way to the end of 2021, a journey that I would very much be underselling with the description “turbulent.”  A lot’s happened, and it has not been easy.  But I’m here.  And I’ve got a thing to review.  And I suppose that’s the most important thing in the moment.  So, let’s jump back to 2018, back to the throws of Avengers: Infinity War, specifically Captain America and his rather disheveled look from his own rather turbulent year.  Fitting, I suppose.

THE FIGURE ITSELF

Captain America is part of the Infinity War tie-in component of Hot Toys’ Movie Masterpiece Series, where he’s figure MMS 481, which made him the sixth of the IW tie-in figures.  The figure arrived not too long after the film’s release, hitting in the fall of 2018.  There were two releases of him, a standard and a “Movie Promo Edition” which was a Sideshow-exclusive in the US.  The difference between the two comes down to a few accessories; the figure proper remains the same.  This Cap is based on his Nomad appearance from the film, which is of course the only look he actually has in Infinity War, so I guess that makes sense.  The figure stands about 12 1/2 inches tall and he has over 30 points of articulation.

While most Caps these days include multiple heads, this release only has the one.  It makes some degree of sense, since he doesn’t have the helmeted look in the film, so I suppose he only needs the one head.  It’s only the one facial expression, but that’s not uncommon for unmasked heads from Hot Toys.  This one does live up to Hot Toys’ usual penchant for very lifelike sculpts.  It sports a pretty spot-on likeness of Evans in the film, at least facially.  The hair is perhaps a little bit too orderly for proper film accuracy, but it’s not too far off, and it’s certainly closer than either Hasbro or Bandai’s attempts were.  It avoids the seam at the sides of the head that the Endgame release had, but trades it out for a rather noticeable join at the back of the head where the longer hair attaches.  It’s still not the worst thing, but at this price point, you do hope for a little better.  At the very least, the paint work topping it all off is really good, up to Hot Toys’ typical standards for face paint, with a very lifelike quality to the whole thing.

In Infinity War, Cap is, at least canonically, supposed to still be wearing the suit he had in Civil War, having had not time on the run between films to swap out.  In actuality, there are a few changes to the suit beyond just the expected wear and tear of being on the run, but they’re generally minor.  In terms of how the suit works on the figure, it’s pretty similar to the Endgame figure, being two main parts, with a lot of layers attached.  As with that figure, this one’s belt sets perhaps a little low, but it’s otherwise a well-tailored outfit that works well with the underlying body of the figure and captures the look of the outfit seen in the film quite nicely.

The underlying base body appears to be the same one used for Endgame Cap, which was a good fit for Evans’ build for the character, as well as doing a good job of balancing aesthetics and functionality.  As with that figure, the movement of the base body is somewhat impeded by the nature of the suit design, which does have some notable restrictions at the hips and shoulders.  Still, there’s plenty of movement to be had, and he can get some pretty solid range on most of the joints.

When it comes to accessories, Cap gets quite a few, including:

  • 8 hands
  • 2 Wakandan shields
  • Outrider corpse
  • Corvus Glaive’s Spear
  • Proxima Midnight’s staff
  • Display stand

The hands include a pair of fists, a pair of gripping, a pair of relaxed gesture, and a right pointing/left open gesture combo.  They give all the important needs for posing and working with the included accessories, and also do a good job of capturing the look of his gloves from the movie.  They’re a little tricky to swap out, but not impossibly so.  The two Wakandan shields are designed for specifically right and left sides, and are able to be fully collapsed or extended, which is certainly nice engineering.  The display stand is the same style as we saw on the Endgame figure.  I dig the hexagonal shape.  And that’s all of the standard release stuff.  The exclusive also adds a fallen Outrider corpse piece to sit atop the stand (along with a printed piece which looks like dirt ground), as well as both Corvus Glaive and Proxima Midnight’s weapons.

THE ME HALF OF THE EQUATION

I missed out on the standard release of this guy when he came into All Time.  I mean, not really missed out, I suppose, since he was in stock, and I just dragged my feet on him, because I wasn’t sure I wanted to jump back into Hot Toys.  Once the Endgame release truly broke me on that, I regretted passing on this guy, so he went on my list of figures I was definitely planning to snag should they get traded in.  As luck would have it, this guy wound up getting traded in within about a week of me getting the Endgame version, which was a solid thematic thing.  He’s the best version of this design available to be sure, and he’s honestly the version of Cap that most reflected my personal mind state as I navigated the last year. A little broken, a little lost, and his resolve a little shaken.  But he’s still him deep down.  A fitting send off to the year.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2999: In Space Silver Ranger

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

IN SPACE SILVER RANGER

POWER RANGERS: LIGHTNING COLLECTION (HASBRO)

Okay, when I reviewed Zeo Gold, I may have been a little overzealous in calling him the greatest Power Ranger ever.  And why is that?  Because I may have been overlooking this guy, Zhane, aka the In Space Silver Ranger, Power Rangers In Space‘s resident Sixth Ranger.  Because, the thing is, Zhane?  He’s pretty darn cool.  Possibly the coolest.  And I’m down for that.  And now he’s got this brand new figure from Hasbro’s current run, which I definitely a win as far as I’m concerned.  So, let’s explore this win just a little bit further, shall we?

THE FIGURE ITSELF

In Space Silver Ranger is a Walgreens-exclusive release from Power Rangers: The Lightning Collection, with limited quantities available through Hasbro Pulse as well.  Thus far, only the Pulse quantities have shown up.  As with yesterday’s Andros, this figure’s release is a bit wonky, since we saw him before Hasbro had officially announced him, and then he showed up on Pulse with no actual quantities, before finally being put up for order, with an actual in-stock status.  Zhane is either the fourth or fifth of the Space Rangers to make it to release, depending on if you count the small quantities of Blue that have made it out as an actual release.  Whatever the case, it’s notable because it’s the first time Zhane hasn’t been the last member of team by a large margin.  The figure stands about 6 inches tall and he has 34 points of articulation.  He’s using the same construction as the other male Space Rangers.  It’s a consistency thing, really, and at this point, if it ain’t broke, don’t fix it, right?  He does get a new belt piece, which has been tweaked to remove the holster.  Otherwise, it’s the same basic piece.  The colors are where the real changes occur, since he’s now, well, silver.  Unlike the others, it’s more than just swapping silver for the main color, since Silver gets a whole different selection of accent colors as well.  They’ve gone for more of a toy style to the colors, since his suit is actually silver, rather than a flatter shade than the helmet as it was in the show.  It’s a slightly more intriguing design in toy form, so I get the choice.  The silver is molded plastic, rather than paint.  It doesn’t look quite as slick, but it will probably hold up better over time.  Zhane is packed with an unmasked head (which looks a lot better in person than I’d expected), two sets of hands, his Super Silverizer in both blaster and blade configurations, and an effects piece.

THE ME HALF OF THE EQUATION

In Space Silver is at the very least tied with Zeo Gold for my favorite Ranger, so I was very anxious to see him show up in this line, especially after he got left out of Bandai’s Legacy Collection.  When he was shown off in-hand with no announcement, I was worried about him being an exclusive, and sure enough, there he was.  Fortunately, I had Max in my corner on this one, and he was able to help me snag one through the Pulse order window.  I’m very thrilled to have this figure in-hand, and I’m very happy to have a decent In Space Silver.

#2998: Andros

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

ANDROS

POWER RANGERS: LIGHTNING COLLECTION (HASBRO)

The continuing narrative of the first six years of Power Rangers, and its conclusion in Power Rangers In Space allowed for a slightly different structure to the show’s first episode.  Since most of the team had already been introduced in the preceding season, the show places its main focus on the one new member of the team, Andros, the season’s Red Ranger.  We first encounter him on a recon mission spying on a gathering of villains from prior seasons, which requires him to have a more incognito appearance, at least at first.  It’s a design that has as of yet not gotten any toy coverage, but Hasbro’s addressing that here, with the figure I’m taking a look at today.

THE FIGURE ITSELF

Andros in Disguise is a Target-exclusive one-off release for Power Rangers: The Lightning Collection.  Or he’s at the very least an exclusive to Target for now.  It’s a slightly confusing situation, as has been the case with a handful of releases from Hasbro recently.  Photos of him showed up with no official announcement, and then Hasbro themselves showed him off, but with no actual mention of release plan, and no mention of any exclusive status.  And then he just showed up on Target’s website, and was very quickly in-stock, making the whole thing a rather surprisingly quick turn around.  The figure stands about 6 inches tall and he has 34 points of articulation.  Structurally, his actual sculpt is identical to Andros in his Red Ranger gear (and all of the other male Space Rangers, for that matter).  It’s a sculpt that gets the job done, and it matches up with the other Andros, so it makes sense.  The main structural change up is the addition of a cloth robe piece for him.  It kind of looks like a bath robe, which I don’t really think is the intended appearance.  It’s a little goofy looking, especially in the photos, but I’ll admit it looks a fair bit better in person than I’d expected it to, and actually holds shape pretty well.  Even the velcro on the front stays secure, which isn’t always a guarantee.  The color work on this guy is another notable change up. Technically, in the show, he’s just wearing his usual Red Ranger gear under the cloak, but it’s shot in a way that hides it in the shadows.  To simulate this, Andros is wearing all black this time.  It’s an interesting look, and the presence of extra gold accenting, especially the insignia on the front, makes it feel like this is an established design from elsewhere.  That being said, I don’t know specifically where, and my brief searching on the internet hasn’t turned anything up.  So, I guess it’ll just remain a mystery.  It certainly looks cool, though.  Andros is packed with two heads, one helmeted (and in all-black to match the main figure), and one unhelmeted (re-used from the prior release), as well as two sets of hands, his Spiral Saber, Astro Blaster, and effects pieces for both weapons.

THE ME HALF OF THE EQUATION

This is an odd release, and certainly not one I really thought I would need.  That said, In Space is my favorite incarnation, and there’s very little I wouldn’t buy from it.  So, this guy was certainly on my radar, not that I was in a rush or anything.  Max actually wound up ordering one online, before managing to find one in store.  Since he didn’t need two, he was kind enough to set me up with the spare.  He’s not essential, and it’s not like he really does anything new, but he’s a rather fun one-off variant.

#2997: High Evolutionary

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HIGH EVOLUTIONARY

MARVEL LEGENDS (HASBRO)

“With a highly advanced intelligence and a cybernetic exoskeleton, the High Evolutionary challenges the Fantastic Four.”

First appearing in the pages of Thor, Herbert Edgar Wyndham, aka the Higher Evolutionary, is kind of one of those grander scope sort of villains.  He’s not really straight-forward evil, but more invested in a larger advancement of humanity and life as a whole.  Some times these goals put him at odds with our heroes, some times less so.  And, more often than not, he’s really just off on his own.  Interestingly, despite what the bio says outright and the presence of the figure in the assortment may suggest, he’s only had fleeting contact with the FF, and very rarely as an adversary for the team.  But, if it gets me a High Evolutionary, it gets me a High Evolutionary.  I won’t be picky.

THE FIGURE ITSELF

The High Evolutionary is the final figure in the FF-themed Retro Collection assortment of Marvel Legends.  This marks his very first time in action figure form, which is pretty darn cool.  The figure stands about 6 1/4 inches tall and he has 28 points of articulation.  High Evolutionary’s movement scheme is pretty standard for the line.  He’s a little bit on the restricted side, especially on the torso and hips, but given the character’s tendency to mostly just stand around menacingly, it honestly isn’t too bad.  He’s also got the pinless construction on the elbows and knees, which continues to be a nice upgrade for all of the figures that have it.  High Evolutionary’s sculpt is an all-new piece, and it’s honestly got a lot going on.  It’s clearly classically inspired at its base, but uses some of the more modern interpretations of the character to add a little bit more detailing, especially on the face.  It makes for a figure that’s a little more visually stimulating than he might be if he were just a straight classic look.  Generally, I quite like it.  The figure’s color work is almost entirely reliant on molded plastic, which is all metallic and swirly.  I’d prefer that the maroon sections were maybe a touch darker, but otherwise it looks pretty solid.  He’s got minor paint work for a few of the smaller accents, which works out pretty well.  They’re cleanly applied and they get the job done.  The High Evolutionary is packed with two sets of hands, one set in fists and the other in open gesture.  It’s not a ton, but he is a completely new sculpt, and I’m not really sure what else there is to give him.

THE ME HALF OF THE EQUATION

My primary knowledge of this guy came from his one episode of X-Men: The Animated Series.  He’s a weird guy, but he’s got a cool look, and it’s definitely been one I’ve wanted for a while in toy form.  His inclusion in this particular assortment may be a little weird, but I’m honestly just glad to have gotten him, and it’s especially nice that Hasbro really put the effort into making as much of a one-off as possible.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#2996: Psycho-Man

Posted by Ethan Wilson in Reviews and tagged with , , , ,

PSYCHO-MAN

MARVEL LEGENDS (HASBRO)

“Highly intelligent, Psycho-Man uses advanced technology to manipulate emotions and threaten the Fantastic Four.”

And we’re back to the Marvel Legends.  We’re staying on the FF path for the next two days, resuming today with Psycho-Man, a Stan Lee and Jack Kirby creation the title’s fifth Annual.  He appeared only a few times in the ’60s, before his connection to the Microverse was used to tie the Micronauts into the mainstream Marvel universe in the ’80s.  His connection back to the FF was brought back around during John Byrne’s run on the book, who used the character to, amongst other things, get Sue to accept that she was a bit old to be going by “Invisible Girl” and that she was also the team’s strongest member.  Good story for her, though perhaps not an astounding showcase for Psycho-Man himself.  He does have a pretty killer look, though, and that always makes for a good figure.

THE FIGURE ITSELF

Psycho-Man is part of the FF-themed Retro Collection assortment of Marvel Legends.  He fits in pretty perfectly, since his only other figure was during Toy Biz’s original FF line, which these figures are homaging.  The figure stands 6 1/2 inches tall and sports 28 points of articulation.  His articulation scheme is actually quite impressive given his overall bulk.  The use of ball joints at the neck and mid-torso really give him a nice range, as do the double joints at the elbows and knees.  He’s also using the pinless construction again, which looks nice and sleek.  Psycho-Man’s sculpt is a completely new offering, and it’s a pretty nice one at that.  It’s definitely going more for the Byrne take on Psycho-Man, which is fitting with the theme, and also just the better take on the character, I feel.  It’s a clean, sleek, and very technically impressive.  He’s only got the one set of hands, which has become a rarity these days.  They’re a decent combo as well, at least in terms of posing options and the like.  Psycho-Man’s paint work is pretty straight forward, with the colors being largely reliant on molded plastic.  It all works very well, and I really love the metallic green.  He’s packed with only one accessory: his Control Box, the thing that allows him to control other people’s emotions.  It’s a rather basic piece, but still a rather fun one.  At least he got something, and this does work quit well with his right hand pose, allowing it to be carried under his arm.

THE ME HALF OF THE EQUATION

Though Psycho-Man’s not really a prominent player in much of anything, I do rather fondly remember his one appearance on the FF cartoon, as well as the figure from the toy line that accompanied, which did get a good amount of use by me on the basis of him just being a pretty great chunky bad-guy toy.  I wasn’t really sure we’d ever see an update on that one, but I sure am glad we did.  This figure is just a pretty solid offering from start to finish, and I can’t imagine there being a better take on the character in figure form.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#2995: Rancor with Luke Skywalker

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

RANCOR with LUKE SKYWALKER

STAR WARS: POWER OF THE FORCE II (KENNER)

“Within Jabba the Hutt’s desert palace on Tatooine, there is a special pit that houses a rancor. Over five meters in height, this reptilian-like creature has long, exaggerated arms, dangerous fangs and huge claws — truly a fearsome sight. The crime lord uses the rancor as a means of eliminating enemies and failed employees. Its pit is located beneath Jabba’s court, providing an excellent view for the crime lord and his associates as victims struggle helplessly to defend themselves. That all changes when Luke Skywalker is dropped into the loathsome pit. Armed with only a large bone leftover from one of the rancor’s previous victims, the Jedi Knight conquers the horrible beast.”

Oh boy, that sure is a nice Rancor there.  Sure would be a shame if someone were to…SABOTAGE IT!!!!  Right?  Get it?  Because, it’s like the whole thing where a bunch of winy fanboys claimed that Hasbro was sabotaging their own product, and then it was ultimately the winy fanboys who…you know…actually sabotaged it?  Isn’t it funny?  Or is it just sad.  Oh, right, it’s probably just sad.  And I’m likely to piss someone off with this intro, aren’t I?  Ah well, these days I fear nothing, so I’ve really got nothing to lose.  Not even the Rancor.  Especially since I wasn’t backing the Black Series one anyway.  But that’s not the point.  What is the point is that I’m falling back on my classic Star Wars reviewing fodder, Power of the Force, and that’s where I’m staying.

THE FIGURES THEMSELVES

The Rancor with Luke Skywalker were added to Kenner’s Power of the Force II line in 1998, as the largest of the creature packs that they were doing.  They’re based on Return of the Jedi, of course, and were actually the only creature pack where that was the case, since Jabba was from his Special Edition appearance in A New Hope, rather than his classic Jedi look.

RANCOR

Certainly one of the largest creatures in the Star Wars verse, or at least one of the largest that’s justifiable in toy form, the Rancor has been getting toy treatment since the vintage line.  This would mark its second time in toy form.  The figure stands about 10 inches tall (thanks to the hunch) and has 6 points of articulation.  He’s not an overly mobile figure, but the Rancor’s also not an overly mobile creature.  It’s main purpose is really just to lumber menacingly, which this one does quite well.  It does have a little trouble standing up, but careful posing can help it find that sweet spot for staying balanced.  The Rancor’s sculpt was an all-new one.  The vintage figure had gone far more basic on its detailing, so this one stepped things up a bit.  The end result is quite a nice piece, especially when compared to some of the smaller figures of the same line.  He’s a respectable match for the creature we see on-screen, and there’s a lot of solid texture and smaller detail work.  Due to the nature of the softer plastic, some of the details are likewise a little softer, but it’s generally quite good.  The only downside to this one is the “Real Feel Skin” feature, which can make him prone to a bit of gunk build-up.  It’s not quite as bad as yesterday’s Clayface figure, but it does require some occasional cleaning.  The paint work on the Rancor is pretty solid, actually.  There’s some decent accent work on the skin, which helps to bring out more of the sculpted details, as well as add a little more depth to the figure’s overall look.  The Rancor gets no accessories of its own, but it does get…

LUKE SKYWALKER

…a Jedi Luke variant.  1998 had quite a few Jedi Luke variants, covering various deviations of his main look throughout the film.  This one is very specifically Jabba’s Palace, after he’s lost the cloak and saber, before he’s gotten shot in the hand.  It’s the only one to fit that very specific narrative.  The figure stands 3 3/4 inches tall and he has 6 points of articulation.  He uses the same head and torso as a few of the Jedi Lukes from the same year, which makes sense from a consistency standpoint, and also means he’s re-using some pretty decent parts.  The arms and legs are new, and designed with him leaning back to look at the Rancor in mind.  The legs do make him a little tricky to keep standing, and the arms are unfortunately rather stiff for any decent posing.  He’s not a bad sculpt, but he’s a more limiting one to be sure.  His paint work is a little more involved than other Jedi Lukes by virtue of him having a bunch of brown flecks to simulate Tatooine sand.  It’s all a ploy to keep his father at bay, really.  Luke is packed with the large bone he uses to defend himself against the Rancor, which is a pretty fun scene specific piece.

THE ME HALF OF THE EQUATION

I was definitely a Jedi Luke fan as a kid, and liked this particular scene a lot, but it was kind of an expensive set, and never a super easy one to find, so I didn’t get this one as a kid.  Instead, I got it quite recently, just over the last summer, when one of them came through All Time loose.  I’ve actually been low-key looking for one for a while now, so I was pretty happy to finally get one.  It’s definitely an important piece of the PotF collection, and one I’m glad to finally have.  There have been more involved Rancors since, but this one’s still just a very nice piece, and the Luke pairs off well with him.