Tag Archives: Hasbro

#3037: B.A.T.

Posted by Ethan Wilson in Reviews and tagged with , , , ,

B.A.T.

G.I. JOE: CLASSIFIED SERIES (HASBRO)

Alright, I gave some love one of Hasbro’s in-house properties, how about the other?  It’s been a little tricky to devote proper love to G.I. Joe in the last few years, what with the line essentially dying for a bit, and then its subsequent re-launch in 2020 being absurdly hard to get ahold of for the first two years of its run.  Perhaps 2022 is the year that things start to turn around?  That sure would be nice.  Something that does seem to be pointing to things being at least a little better is how they’re handling the army builders.  The line’s first few army builders were wonky, with the initial Cobra Trooper and Viper as really hard to get exclusives, and the Red Ninja being the short pack of its respective assortment.  This year, we’re getting two army builders, packed at heavier numbers, in standard assortments, right out of the gate.  The first of them is an update on 1986’s own Battle Android Trooper, better known as the B.A.T. for short!

THE FIGURE ITSELF

The B.A.T. is figure 33 in the G.I. Joe: Classified Series line-up, hitting in the first assortment of 2022, alongside the Alley Viper and a re-pack of Gung-Ho.  The B.A.T. is the heaviest packed figure in the assortment, which certainly makes a lot of sense, and will hopefully help to keep the figure from being quite as prohibitively hard to find as some of the line’s earlier figures.  The figure stands 6 1/2 inches tall and he has 36 points of articulation.  The articulation scheme more or less just follows what’s been previously established with the line, and I’m quite alright with that, really.  The B.A.T.’s sculpt is an all-new one, very clearly patterned on the original V1 version of the character.  As with the rest of the line, there’s certainly some updating and modernizing, but on this release in particular, it’s rather down-played.  This one feels much more like a rather direct update, as opposed to more of an overhaul.  I really enjoy just how much detailing goes into this particular look, from the mechanics of the arms, to the heavy texturing of the overlying uniform.  I also really love the in-depth sculpting on the torso panel; to think that used to just be a sticker on prior figures.  The color work on the figure largely follows the V1 set-up.  It’s fairly basic overall, but does what it needs to.  I’m not crazy about the molded plastic silver on the arms, thigh strap, and grenades, especially when all the other silver is painted, but it’s not the end of the world, and, at least on the arms, it’s true to the V1.  The B.A.T. is packed with a handgun, two removeable chest plates (one standard, one damaged), an alternate damaged head, a backpack, and three different alternate hand attachments, mimicking those seen on the original figure.  The chest plates being solid black is the one notable design change here, and while it’s not my first choice, it’s also not a terrible look either (plus there are third party clear plates out there, if you’re a stickler about it), and I love the damaged option.  The damaged alt head is really awesome, calling back to one of the best features of the 25th line, and just further expanding upon it.  The alternate hands are rather standard, and aside from maybe wishing the claw had gotten extra movement like on the 25th release, I’m quite happy with them.  In general, it’s just a really solid selection of extras here.

THE ME HALF OF THE EQUATION

After the Viper, the B.A.T. is a very close runner-up for my favorite Cobra army builder.  I knew it wasn’t going to be long before we saw them, but I was still a little bit anxious to see them when we were early in the line.  Once we got the rumors, and then the eventual confirmation, I was very down for these figures.  No way was I gonna pass on a really cool B.A.T.  And that’s what this is: a really cool B.A.T.  I love how close they stuck to the original, while still giving him enough subtle changes to fit in with the rest of the line.  All of the extras here are fantastic, and I look forward to seeing what possible re-decos and such we might be able to see of this one.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3036: Soundwave

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SOUNDWAVE (& RAVAGE)

TRANSFORMERS: STUDIO SERIES (HASBRO)

Having exhausted all of the Earthmode characters from Bumblebee, in 2020 Hasbro started dipping their toes into the waters of the large cast of characters seen in the film’s opening battle on Cybertron.  Initially, they stuck purely to characters like Bumblebee or the Seekers, who had proper alt-modes displayed in the sequence (Cliffjumper also got in on this, by virtue of sharing his alt-mode with Bee), but this year, they’re going a step further and focusing in on the characters without any displayed alt-modes.  You know what that means?  It means your boy Ethan gets to review another Soundwave is what it means.  And your boy Ethan is all kinds of down for that.

THE FIGURE ITSELF

Soundwave is part of the Wave 15 Voyager-Class assortment of Hasbro’s Transformers: Studio Series, alongside a repack of last year’s Autobot Hot Rod.  He’s numbered 83 in the line-up, making him the last of the Bumblebee-themed figures from this first batch for the year.  It’s our second time getting Soundwave in his G1-inspired Bumblebee look, and the first time we’ve gotten a toy of it from Hasbro proper.  In his robot mode, the figure stands just shy of 7 inches tall and he has 27 workable points of articulation.  There are a few spots of restricted movement on this guy, especially when compared to other more recent Soundwaves, but the overall set-up of movement serves him well, and is well integrated into the overall look and design.  Soundwave’s sculpt is a pretty solid one, and does a respectable job of capturing his design from the movie.  Obviously, it’s not quite on the same level as the ThreeZero version I looked at last year, but then I don’t really expect it to be, now do I?  The level of detailing is pretty sharp, and he largely avoids any major gaps or hollow spots in his robot mode.  He’s also got an integrated cassette door-esque spot for storing his little buddies, complete with a spring loaded opening feature.  His arms aren’t quite free enough to get his hand up by the button, but it’s otherwise a cool feature.  Soundwave’s paint work is generally pretty good, with clean application, and a lot of decent coverage for the important details.  There’s one slight oddity to it, though; while his construction appears to have light-piping worked in for his optics, the visor is painted an opaque red, which doesn’t feel like it was *quite* what they were going for when they designed him.  Soundwave is packed with his usual shoulder mounted cannon, as well as the blaster rifle we saw him with in the film.

As addressed above, Soundwave has no alt-mode in Bumblebee, since he only participates in the battle as a robot.  So, for him to be a proper Transformer and all, Hasbro had to supply him with an alt-mode.  This one has been the source of much gnashing of teeth amongst the fanbase for being a pointless and nothing alt-mode, but Soundwave does actually draw his alt-mode from another piece of media, namely IDW’s Transformers Vs. G.I. Joe from 2014.  As any direct tie-ins to that series are rather unlikely, it’s not a bad re-use of alt-mode.  It also looks a bit like a Snowspeeder, and I like that.  Transforming him isn’t too bad; there’s some slight fiddliness, but not as bad as some Studio Series releases.  There’s one spot of a false piece showing up in the final assembly, but otherwise things stay pretty kosher.  On my figure, one of the ports on what would be his right forearm is malformed, meaning you can’t use it for one of his weapons the way the instructions show.  That said, there’s other, better spots for storing them, and I do rather enjoy this alt-mode.  Not enough to leave him that way long-term, but still.

Shipping alongside these latest Studio Series sets is a Core Class assortment, which is new for Studio Series specifically, though was introduced as a main scale-class last year with Kingdom.  Kingdom used it for smaller-scale versions of heavy hitters, but Studio is mixing that concept in with some figures that should actually be smaller.  In the first assortment, we get a Bumblebee-inspired Ravage, specifically designed to work with Soundwave.  I’m bad about reviewing Soundwave’s cassette buddies on their own, so I figured I might as well bundle him in here!  In robot mode, Ravage is 3 1/2 inches long and has 16 workable points of articulation.  In many ways, he does feel like a slightly simplified and scaled down version of the ThreeZero one, which I suppose is fair.  They are based on the same design and all, so it makes sense.  He’s a little blockier than he should be, but as far as small-scale Ravages go, he’s really not bad.  He’s even got a working jaw, which is fun.  Ravage is packed with his two side cannons, the missiles for the top, and an extra missile based on G1 Soundwave’s and designed to fit in the cannon.  It’s an odd choice, since Soundwave doesn’t get the handheld one that should actually have the missile…but I guess it’s the thought that counts.  Like the larger one, this Ravage turns into a box, meant for storing in Soundwave’s chest compartment.  You have to make sure he’s transformed *just* right to fit in there, which is a little frustrating at first, but once you figure it out, it works alright.

THE ME HALF OF THE EQUATION

I’m cutting back on Transformers.  I swear.  I really mean it.  But there was a Soundwave, you guys!  I had to have Soundwave, obviously.  And Ravage.  You know, because otherwise Soundwave is gonna get all lonely.  So, just the pair of them, right?  Right.  I’m sticking with that, I swear.  I really like this design for Soundwave, and I really liked getting it from ThreeZero, but I’ll admit, it’s nice to have an actual proper toy of it that I can just mess with, without fear of breaking a very expensive collector’s piece.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

Flashback Friday Figure Addendum #0017: Jyn Erso

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , , ,

JYN ERSO

STAR WARS: THE BLACK SERIES (HASBRO)

I bet you guys weren’t expecting one of these, now were you?  Sure, it’s not been nearly as long a gap between Flashback Friday Figure Addendums as the last two rounds, but four months is still four months, right?  What can I say, I like keeping you guys on your toes.

As I’ve been discussing the last two days, one of Hasbro’s focuses in The Black Series this year is doing the whole Rogue One team in one cohesive run.  That’s one new figure, and then a bunch of re-issues.  For the most part, I either missed out on the original runs, or I didn’t need the update, but I did decide to go for the re-issue of Jyn.  I know, it might seem crazy to buy another Jyn, but I’m a crazy guy.  Here’s what this crazy guy had to say about the original release:

Alright, the 3 3/4-scale Rogue One stuff is done for now (though I’m sure there will be plenty more things for me to review, going by what Hasbro’s shown off in the last week), so we move on to the larger-scale Black Series stuff.  As of late, it’s been a little difficult to say where this line was headed, what with a large chunk of the Force Awakens stuff either showing up too sparsely, or being too heavily packed.  It looks like Rogue One might help getting things back on track.  The first of the new figures is main character Jyn Erso, who I’m looking at today!

THE FIGURE ITSELF

Jyn is sort of taking the place of last year’s First Order Stormtrooper in regards to release style.  She was first released as a preview item at this year’s SDCC, before being slotted into the regular release line-up.  She’ll also be showing up as part of the Target-exclusive 3-pack with Cassian Andor and the Death Trooper Specialist some time next month.  They all look to be the same figure, but for this review, I’m looking at the regular release figure.  She’s part of the first series of Rogue One-inspred Star Wars: The Black Series figures, and she’s figure #22, making her chronologically the first figure in the series.  Yes, you read that number right, she’s #22, meaning Hasbro actually kept the number scheme for The Black Series for more than a year.  And there was much rejoicing (yaaaaay.)  Jyn here is wearing her Jedha outfit, which, from what we’ve seen in the marketing for the movie looks to be a fairly present look.  The figure stands about 5 1/4 inches tall and she has 29 points of articulation.  Jyn’s sculpt is fairly decent overall, and is certainly on par with what we’ve come to expect from The Black Series.  The hood is kind of bulky and odd looking, but it’s not awful, and it can easily be removed, resulting in a superior figure.  The underlying head sculpt is pretty decent, and bears more than a passing resemblance to Felicity Jones (though it’s not quite spot on).  It’s a little softer than I might like, but it’s not awful.  The body sculpt is also pretty great, with a nice set of proportions and some nice layering on the various clothes.  The verst is technically removable, but since the arms still have the jacket sleeves on them, I can’t see many people removing it.  The paintwork on Jyn is passable.  It’s not anything amazing or anything, but it’s better than a lot of last year’s Black Series offerings, which is a nice improvement.  If Hasbro could start adding a little bit of accent work here and there, I think the figures could be even better.  Jyn’s only accessory is her blaster pistol (the same as the one included with her smaller-scale counterpart).  It’s a little light given the price (and the fact that the same series features are re-issue of last year’s Rey, which has a staff, BB-8, and an added lightsaber), but hood makes up for it a bit.

THE ME HALF OF THE EQUATION

Jyn was one of the first items I grabbed from TRU during their midnight opening.  I didn’t know she’d be showing up in the Target set as well, or else I’d probably have held off on this particular release.  That being said, she’s a solid figure, and a lot of fun to mess around with.  There are worse things than owning two of a good figure, I suppose.

That review was written in October of 2016, before I’d seen the movie, or really knew anything about the character I was reviewing.  It’s also something of a relic in a few ways other than the writing (which is usually where the relic status on these old reviews comes up), like the rejoicing on keeping the numbering on the line, or the fact that I bought her at TRU.  The red box line wound up going much further than Jyn’s meager 22, wrapping up in 2020 with Kit Fisto’s 112.  It wound up with quite a run.  I was actually pretty positive about this figure in my original review, something I’d kind of forgotten about after she kind of became a go-to figure for ragging on by the fanbase.  I stand by it, because she’s actually a really nice figure.  It was kind of nice to remind myself of that.  This release is overall very similar.  Like Kanan from last year, the change-up is the face paint, and it’s a really major change.  The likeness was alright, but it’s pretty on the mark now.  Totally revitalizes the figure’s look.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3035: Chirrut Imwe

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CHIRRUT IMWE

STAR WARS: THE BLACK SERIES (HASBRO)

“Deeply spiritual, Chirrut Imwe believes all living things are connected through the Force.  Though he lacks Force abilities, the warrior monk has rigorously honed has body through intense physical and mental discipline.”

Remember what I was mentioned yesterday about Hasbro doing a whole set of Rogue One releases for Black Series?  Well, in addition to the all-new Bodhi figure, they also did re-issues of the other members of the main team. While I got a handful of the original releases, I missed out on a few of them the first time around, so this provides me a second chance to get them.  One of the ones I missed was today’s focus, Chirrut Imwe.

THE FIGURE ITSELF

Chirrut Imwe is figure 4 in the Rogue One set of Black Series figures.  He’s a reissue of the #36 figure from Phase III of the line, which hit during the latter part of the original Rogue One run.  The figure stands a little over 5 1/2 inches tall and he has 27 points of articulation.  The Rogue One figures were, unfortunately, not the line at its best when it came to articulation schemes.  Chirrut represents one of the worst instances, honestly.  The range on the arms and legs, especially at the elbows and knees, is quite restricted, with the elbows barely making even a full 90 degrees.  In addition, the actual layout and functionality of the joints is just kind of odd.  You can get some poses out of him that work, but they’re not particularly intuitive.  Chirrut’s sculpt was unique to him at the time, and remains so to this date.  It, like the articulation scheme it sports, is a product of its time.  It’s not terrible, but it’s not great either.  A lot of it’s because the aforementioned articulation’s not really worked in all that well.  The arms and legs again get the worst of that particular issue.  The head’s at least got a pretty solid likeness of Donnie Yen, which is definitely the strongest part of the sculpt.  His robes are a mixed media affair, making use of cloth pieces for the bottom portion. It works out alright, and does at least allow for a little more mobility, albeit somewhat limited by the actual articulation.  Chirrut’s paint work is overall rather basic.  The general colors match up to the on-screen attire, and the printing for the face is an incredible improvement over the prior release’s paint.  Chirrut is packed with his staff and his lightbow.  They’re both pretty solid pieces, especially the lightbow, which is made up of four moving parts, allowing for it to be properly collapsed and deployed.

THE ME HALF OF THE EQUATION

The assortment that contained Chirrut’s original release was never plentiful at any retail locations near me.  By the time I actually saw one in person, it was obvious that Hasbro wasn’t going to complete the team line-up, so I didn’t see the point in expanding the set beyond the main three.  With Hasbro circling back around and completing the run, I figured it was worthwhile to finally snag him.  He’s admittedly a bit outpaced by more modern offerings, but at least he’s a little better than the first release.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3034: Bodhi Rooki

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BODHI ROOK

STAR WARS: THE BLACK SERIES (HASBRO)

“A former Imperial pilot, Bodhi has strong piloting and technical skills that he will put to use for the Rebellion.  Ever practical, but highly anxious, Bodhi must gather his courage to bring the battle to the Empire.”

When Hasbro launched Phase IV of The Black Series, in addition to a selection of new figures, they also devoted a whole sub-series to re-releasing and completing the core cast of Star Wars: Rebels.  We got a Zeb to finish out the team, but we also got the rest of the team, with the earliest of them updated to the new face-print styling that has become the standard for the line.  It was a pretty successful venture, so Hasbro has set their sites on another unfinished cast, namely the crew from Rogue One.  Conspicuously absent from the Black Series line-up was poor old Bodhi, a key character to the whole plan to smuggle out the Death Star plans in the first place.  How could you leave him out?  It’s unreasonable, darn you!  Well, it’s okay, because just like Zeb got his long overdue release, so did Bodhi, and I’m taking a look at it today!

THE FIGURE ITSELF

Bodhi Rook is figure 6 in the Rogue One set of Black Series figures.  Of the main line releases in the set, Bodhi marks the one truly new figure, since he’d not had a prior release, as brought up earlier in the review.  The figure stands 5 3/4 inches tall and he has 30 points of articulation.  Bodhi’s articulation scheme is on par with the most recent of the Black Series releases.  It’s got a really solid range of motion, especially on the elbows and knees, and he’s even got the butterfly movement on his shoulders, which adds a lot to the poses you can get out of him.  Bodhi’s sculpt is an all-new offering, as expected, and it’s a really strong one.  The likeness on the head is a pretty spot-on match for Riz Ahmed in the role, and they even do a respectable job of making his hair appropriately scraggly.  The googles are a separate piece, but glued in place.  Still, it means that, unlike the smaller figure, they’re actually clear like in the movie.  The body sculpt is really scrawny and gaunt, as he should be, and helps him to stand out from the others.  His vest is a separate overlay.  It’s not removable like it was on the smaller figure, but it still adds some extra depth to everything.  Bodhi’s paint work is okay, if not the greatest.  The face is certainly the best part, since it’s got the printing.  There’s some misalignment on the hair paint, so he looks like he’s got a few bald spots.  It’s at least on the sides, so it’s not super obvious.  The work on the Imperial insignias is decent, and all of his pens are properly painted too, but the vest winds up lacking a bunch of the details on the buckles and clips, so it’s just largely an unpainted clump of brown.  Just a little bit more detailing would definitely go a long way.  Bodhi is packed with a small Rebel blaster, as well as his cable pack from the end of the movie.  The pack is a pretty impressive piece, complete with a full spool of wire, which can even be wound and unwound.  It’s a really cool piece, and helps the figure feel a lot better accessorized than a lot of other Black Series releases.

THE ME HALF OF THE EQUATION

I really liked Bodhi as a character, and I ewas always really bummed that he never got a Black Series figure back with the others.  It was part of why I never bothered with the rest of them outside of the core three.  I was definitely really excited when this guy was announced, and even more so to get him in hand.  He turned out really, really well.  The updates to the line have benefited him well and the end result is honestly the nicest of the whole Rogue One team.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3033: Wrecker

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WRECKER

STAR WARS: THE BLACK SERIES (HASBRO)

“Wrecker has brute strength that makes him capable of lifting a clone gunship without any help. His muscle and size are matched only by his temper… and an equally pronounced sense of humor.”

Hey, how about this weekly Bad Batch thing I’ve got going?  Pretty cool, right?  Boy, you guys are gonna be real disappointed when I don’t actually do it next week because I don’t actually have anything more Bad Batch to look at yet.  Sorry, did I let the wind out of your sails a bit?  I don’t mean to be a downer.  Would it make you feel better if I actually got to actually reviewing this toy, instead of all this weird meta crap that I keep falling into?  Okay, I’ll get away from the weird meta crap that I keep falling into.  Away from the weird meta crap, we’re going to be talking about Wrecker, who fulfills the Batch’s archetype role of “the big guy,” by being, well, big.  Good for him.

THE FIGURE ITSELF

Wrecker is figure 5 in the Bad Batch-sub-line of Hasbro’s Black Series Phase IV.  He’s a deluxe-sized figure, and is the last of the original core members of the titular team, though they will be joined by both Echo and Omega later this year.  The figure stands 6 1/2 inches tall and he has 31 points of articulation.  In terms of movement, Wrecker is pretty similar to how Zeb worked out, meaning he’s got quite a good range of motion on most of the joints, notably the shoulders and elbows.  Given how restricted he *could* be given the nature of the design, I’m quite impressed by how well Hasbro has managed to make this work.  Wrecker gets an all-new sculpt, which is unsurprising, given how much larger he is compared to the rest of his teammates.  Like Tech, I find that Wrecker’s sculpt does a better job of hybridizing his design from the show with the real world stylings of The Black Series.  There are certainly some more animated elements on the armor design, but there’s also a good balance to how things work.  His armor is well defined, with sharp lines, as well as a little bit of sculpted damage.  As with Tech, a number of the pieces are separate overlays from the main body, which gives him a little more depth.  Wrecker, like the rest of the Batch, includes a removable helmet.  It sits quite snuggly on the underlying head, and is generally quite well scaled to the rest of the body, and does a great job of capturing the design from the show.  The underlying head has enough of that generic Morisson likeness to pass him off as a clone, but keeps his as unique as the others.  It’s a pretty strong sculpt, with a lot of character.  I love the slight smirk, and the scarring turned out quite well.  It’s probably my favorite of the unmasked Batch heads thus far.  Wrecker’s paint work is pretty decently handled.  The base work is all pretty strong, as well as being consistent with the other team members.  There’s some slight wear to the detailing of the armor, as well as some additional scraping and scuffing details.  The unmasked head gets the printing on the face, which works well with the sculpt.  In general, just a solid offering on the paint front.  Wrecker is packed with his blaster (shared with Hunter), knife, and back pack.  It covers the basics for a battle-ready Wrecker, but I wouldn’t have minded seeing his small doll, or even a set of alternate hands in fists.

THE ME HALF OF THE EQUATION

I’ve been waiting on this guy to complete my team for a little bit, since I actually got Tech a bit before I got around to reviewing him.  This guy definitely feels a lot like Zeb in terms of quality, and that’s a good thing.  Tech’s still my personal favorite, but Wrecker’s a strong figure in his own right.  After a slightly softer start with Hunter and Crosshair, I feel like the team filled out well, and I’m very excited for Echo and Omega to wrap things up!

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3032: Cad Bane

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CAD BANE

STAR WARS: THE BLACK SERIES (HASBRO)

“A ruthless bounty hunter from the planet Duro, Cad Bane was the preeminent blaster-for-hire in the galaxy at the time of the Clone Wars. No quarry was too dangerous for Bane … if the price was right.”

Well, hey, this one’s actually pretty timely, huh?  Or…is it?  You know, cuz, umm, spoilers or whatever.  Introduced in The Clone Wars cartoon, and patterned on Lee Van Cleef’s Angel Eyes from The Good, The Bad, and The Ugly, Cad Bane is probably one of the few examples of an attempt to create another Boba Fett actually kind of working.  He’s generally a pretty popular character in his own right, and has managed to find footing in two additional series outside of Clone Wars‘ run.  His toy coverage has been surprisingly sparse.  He got a small handful of figures during the Clone Wars run, and back in late 2020, he also got a Black Series figure.  Sure would be a shame if that thing were, like, impossible to get, or something, right?

THE FIGURE ITSELF

Cad Bane is figure 6 in the Clone Wars sub-line of The Black Series‘s Phase IV incarnation.  He’s only the second Clone Wars figure to get a standard release, though he did also get a Pulse-exclusive release, which was the same core figure, but with his robot sidekick Todo 360.  The figure stands about 6 inches tall and he has 31 points of articulation.  Cad’s articulation style is of the new breed of articulation for the Black Series figures, but as an earlier release, he’s kind of at the beginning of them figuring things out, so some of it’s not quite as refined as more recent figures.  The joints are all there, but the range isn’t always.  The neck and elbows are both more restricted than I’d like.  Cad’s sculpt is unique to him.  As a character that, at the time, had only animated appearances, there’s a degree of artistic license on translating him from Clone Wars into a real-world style.  Things on this one end up adhering much closer to that animated style than any other characters to make the jump in this line, barring possibly Zeb.  Essentially, they took the animation model, ever so slightly tweaked a few of the proportions, and added a fair bit more texturing.  It ultimately works pretty well, especially given his more alien nature in-universe.  There’s a lot of actual layering going on with the assembly of his outfit, which looks really sharp, and also gives him quite a bit more depth.  The figure’s hat, bag, and breathing apparatus are all removable, adding some extra variety to his display options.  I’m not super crazy about the hat, if I’m honest.  The shaping seems a little bit off, and it doesn’t really sit securely at all, at least on my figure.  You can kind of find a decent spot to hold it a little better, but even then, it’s not going to be staying in place during any posing.  Cad Bane’s paint work is genuinely pretty solid.  There’s not a ton of variety of color inherent to the design, but they make up for it with a lot of weathering, which helps to really sell the character’s gunslinger angle.  Cad is packed with his twin blaster pistols, which he can either hold, or stow in his holsters.  It’s a shame we couldn’t also get his rifle, but given how much is going into the core figure’s construction, it’s pretty understandable.

THE ME HALF OF THE EQUATION

If you keep up with the site, you might recall that I reviewed the rest of Cad Bane’s assortment of Black Series figures at the beginning of last year, while they were still rather new.  Why not review Cad then?  Because I didn’t have one.  For whatever reason, that assortment was scarce, and Cad was the only one with no immediate re-stock, so I had to wait until they finally got the solid cases of him distributed, which took over a year’s time (hey, he did better than Bly, whose restock took almost two whole years, and happened after his packaging style had already been abandoned).  So, it was a bit of a wait.  Was he worth it?  Generally, yeah.  I’ll admit that he did let me down just a tad right out of the box, but that might have been due to the whole playing up the hype in my head thing.  I’ve had him for a bit now, and I’m warming up to him.  He’s got some issues, but I like the overall product a lot.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3031: General Lando Calrissian

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GENERAL LANDO CALRISSIAN

STAR WARS: THE BLACK SERIES (HASBRO)

“Lando Calrissian served as a general in the starfighter attack on the second Death Star, showing off his superb piloting skills by guiding the Millennium Falcon into the Death Star superstructure.”

Lest you may think that Hasbro has given up on the Original Trilogy coverage for The Black Series, have no fear, our one token OT item is here!  It’s time for another Lando that people will beg for and then not buy once he’s actually available, until he sells out and they claim that Hasbro didn’t make enough.  Ooh, sorry, there might be some in-built aggression there.  When last I was discussing Lando, in the summer of 2020, I had brought up the character’s general’s gear from the end of Return of the Jedi.  Well, would you look at that?  I’m gonna be looking at that one again!

THE FIGURE ITSELF

General Lando Calrissian is figure 07 in the Return of the Jedi-sub-set of Black Series Phase IV, placing him right after the deluxe Boba Fett numerically in the sequence.  He’s the last figure in the late 2021 assortment for the line, and, as noted in the intro, the only Original Trilogy-based figure in this round of figures.  The figure stands just over 6 inches tall and he has 27 points of articulation.  In terms of movement, Lando feels like a bit of a step back.  The range on the joints isn’t terribly, but they’re not particularly well worked into the sculpt, and he misses a number of the steps forward on how the joints are assembled.  In a lot of ways, he kind of feels like an older sculpt that was sitting around.  That being said, his sculpt is an all-new one, even if it doesn’t necessarily feel it.  The head gives us another stab at the Billy Dee Williams likeness.  It’s not as good as the Disguised Lando, but it’s better than the initial Bespin version.  None of them have really been all that bad, so he’s generally made out alright in this category.  The body sculpt captures all of the design elements for his uniform. Pretty much, it does exactly what it needs to, and leaves it at that.  Not a ton of detailing or anything, but it looks decent enough.  While the Bespin Lando got a plastic cape, this one goes for a cloth piece, and it looks decent enough.  It’s held in place with a plastic clasp, which has trouble sitting just right.  It’s certainly an improvement on how the Vintage Collection release handled things, though.  Lando’s paint work is pretty straight forward stuff.  The printing on the face works well, and all of the base color work on the uniform is what it needs to be, much like with the sculpt.  Lando is packed with a blaster pistol, which he can either hold, or stow in his shoulder holster.  It feels a bit light, but that’s really just Black Series these days.

THE ME HALF OF THE EQUATION

Of all the figures in this assortment, Lando was the one that excited me least.  He feels kind of overdue at this point, I guess, but it’s also not like we haven’t seen this look in plenty of other styles.  With a bunch of actually new offerings for the rest of the set, and this not being one of my personal favorite looks for the character, he just doesn’t thrill me.  The figure’s fine.  He does what he needs to, and he gets Lando back out on shelves, which is far from the worst thing.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3030: Koska Reeves

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

KOSKA REEVES

STAR WARS: THE BLACK SERIES (HASBRO)

“A master of hand-to-hand combat, Koska Reeves is loyal to Bo-Katan and is a member of a band of Clan Kryze Mandalorians striking back at the Imperial remnant.”

The Mandalorian‘s first season crafted a lot of new lore (or at least lore that was new to a wider audience) for the Mandalorians, leading some people to question how this would fit with the lore established in the likes of Clone Wars and Rebels.  The second season in turn brought that previous lore to the forefront, reintroducing Bo-Katan, and with her, a few other Mandalorians from her version of the culture.  Introduced alongside Bo-Katan’s live action debut were her two lieutenants, Axe Woves and Koska Reeves.  Koska seems to have been the one to take off a little bit more, since she re-appeared alongside Bo in the second season finale, and she’s also the first one to get a figure, which I’m taking a look at today!

THE FIGURE ITSELF

Koska Reeves is figure 12 in the Mandalorian sub-set of Hasbro’s Black Series in its Phase IV incarnation.  She’s the second of the two Mandalorian figures in this particular assortment, and is thus far the trickiest to acquire from this particular round, likely due to her being the short-pack for this set.  The figure stands just under 6 inches tall and she has 27 points of articulation.  Structurally, Koska is largely the same as Bo-Katan.  It’s not a surprise, nor is it unwarranted, since the two sport very similar designs.  Apart from some small details here and there, notably the collar of her jumpsuit, that aren’t quite spot-on, but it’s overall close enough to justify a little re-use.  The belt has been modified, downgrading her to one holster, rather than two.  It’s otherwise pretty much the same.  Koska’s helmet is an all-new piece, slightly different in its shaping than Bo’s.  It sits lower than Bo’s, which also guards the neckline a bit, covering up that one spot of inaccuracy.  Underneath the helmet is an all-new unmasked head sculpt, which is an okay offering, but doesn’t have quite the spot-on likeness for Sasha Banks you’d hope for, given the overall upward trend on Black Series likenesses recently.  Still, it’s a distinct sculpt, and gets a lot of the character down, even if the likeness isn’t quite there.  The paint work on Koska is okay.  It’s more in-line with the on-screen color scheme than Bo-Katan’s was, and it’s actually pretty bright and eye-catching.  Unlike a lot of this set, she actually gets a fair bit of accent work, especially on the armor.  Koska is packed with her jetpack and two blaster pistols, even though she’s only got a spot for one.

THE ME HALF OF THE EQUATION

Since we’d already gotten Bo-Katan, it really was only a matter of time before we got some of her back-up.  Koska being the first makes a lot of sense, and I’m glad Hasbro didn’t opt to drag things out on this one.  She’s a pretty straight forward figure, banking on a lot of re-use, but it generally works out pretty well, and she fills out the roster pretty nicely.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3029: Q9-0 (Zero)

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

Q9-0 (ZERO)

STAR WARS: THE BLACK SERIES (HASBRO)

“A bug-eyed protocol droid with modified programming, Q9-0 — or “Zero” to his colleagues — operates with precision timing.”

The Mandalorian‘s first season had a minor running gag of pairing off Din, who was seen by some as just a stand-in for Boba Fett, off with other characters that were in some way stand-ins for the other bounty hunters from the scene aboard the Executor in Empire.  The most straight forward was, of course, IG-11 (who was even meant to just be IG-88 at an early stage of production), but Din also faces down some Trandoshans (the same species as Bossk) in the second episode, and in Chapter 6, one of his companions on the prison heist mission is Q9-0, a bug-eyed protocol droid turned bounty hunter, with some not unlike 4-LOM qualities.  And he’s also voiced by Richard Ayoade, which is a pretty cool thing in and of itself.  Now he’s got a figure, which is admittedly, not voiced by Richard Ayoade in reality, but is voiced by him in my mind.

THE FIGURE ITSELF

Q9-0, aka Zero, is the 11th figure in the Mandalorian sub-line of Hasbro’s Black Series‘s Phase IV incarnation.  He’s the first of two Mandalorian figures in the assortment that hit retail last fall, and also the first figure to be based specifically on Chapter 6 of the show.  The figure stands about 6 inches tall and he has 30 points of articulation.  The movement on his arms is notably a bit restricted, largely due to design, but the legs get a much better range.  Whatever the case, he’s totally capable of getting all the appropriate movement for the character based on the show, as well as a little more movement in the legs, so he does what he needs to.  Zero’s sculpt is an all-new offering, not borrowing from any previous protocol droid sculpts.  It’s a good recreation of Zero’s on-screen design.  There’s quite a lot of detail work going into it, and the articulation is pretty well worked-in aesthetically.  He’s got a separate, albeit nonremovable, shoulder harness with some pouches, as seen in the episode.  It adds a nice touch of character to him, as well as giving him something that looks more worn-in compared to his more machined body, which makes for a cool contrast.  Zero’s paint work errs a bit more on the basic side.  All the standard color work is there, and he gets a little bit of accenting in a few spots, but generally, it’s just the basic.  It does rob the sculpt of some of its punch, just a bit, but because the sculpt is a s strong as it is, the lack of paint doesn’t really ruin the figure, either.  Zero is packed with a single blaster rifle.  He has a little bit of trouble getting it into his hands properly, but it’s otherwise pretty cool.

THE ME HALF OF THE EQUATION

Zero was certainly my favorite part of Chapter 6 (I’m a sucker for cool droids), so I was hoping we’d wind up getting him figure form at some point.  I was fairly happy to see him turn up here.  The figure is pretty middle of the road all things considered, but that means he’s still far from a bad offering, and he’s probably my second favorite in this particular assortment.  I’m curious if we’ll see the rest of the crew from this episode, especially in light of Mayfield being based on his Season 2 appearance, but I’m honestly content to just have this guy, really.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.