Tag Archives: Marvel Legends

#2915: Hawkeye

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HAWKEYE

RETURN OF MARVEL LEGENDS (HASBRO)

“None can equal the marksmanship of Hawkeye, the world’s greatest sharpshooter!”

In light of the success of 2012’s Avengers film, and how it served to highlight pretty much the whole cast, Hawkeye actually managed to get his own solo book for the first time in a good while.  Written by Matt Fraction and pencilled primarily by David Aja, the series delved into Hawkeye’s more down-to-earth status compared to the rest of the Avengers, and has become quite the definitive take on him, even serving as a clear inspiration for his upcoming Disney+ live action show.  To keep the character at least a little more in line with his movie counterpart, he got a radical redesign (as far as the 616 version of the character was concerned; it wasn’t too far removed from the Ultimate version’s standard gear), which actually got a pretty quick turnaround on toy treatment.  In early 2013, it found itself getting the Legends treatment, and I’m taking a look at that particular figure today!

THE FIGURE ITSELF

Hawkeye was released in the Rocket Raccoon Series of the Return of Marvel Legends, which was in fact one of the last assortments of that incarnation of the line.  It was quite scarce on the distribution front, and was so ill-supported by retailers that its refresh cases never went into production, meaning that Hawkeye’s swap figure, a more classic version of the character, wouldn’t get released until the Allfather Series in 2015.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  Rather amusingly, I’ve actually reviewed every single piece of this figure before, though, in his defense, a number of the parts were actually new at the time.  He’s build on the Bucky Cap body, and has the novelty of being only the second re-use of it.  Subsequent Hawkeye’s have followed suit, which makes sense.  His harness came from Commander Rogers, and his belt came from US Agent, although I’ve looked at both via their many other releases since.  New to this figure were the head and quiver.  The head would eventually be re-used as Yellow Daredevil’s unmasked head.  It works better for Clint than it did Matt, and actually does an okay job of merging Aja’s very distinct Clint Barton design with something more in line with the rest of the line.  At least it’s not too Hasbro-face-y.  The quiver was a re-working of the movie version, but was tweaked to actually give him arrows, and wound up being re-used on the Allfather version (as was intended when he was just a swap as well).  All in all, it’s not a bad set-up, and clearly there were a lot of worthwhile parts here.  In terms of paint, this figure’s not bad.  He definitely emulates the “house style” version of this Hawkeye suit, more so that Aja’s design specifically, since there’s a more involved design on the chest, and more purple on the boots.  It still works pretty well for capturing the feel, though.  Hawkeye was packed with his bow, which was re-used from the movie release, and would continue to see use later in the line as well.

THE ME HALF OF THE EQUATION

I never once saw a single figure from this set at retail.  I don’t know that I would have bought this one if I’d seen him at the time, since I still wasn’t back into Legends, and I probably would have been waiting for the variant anyway.  That said, I do like a good Hawkeye no matter what, and when this one got traded into All Time a few months ago, it was hard to say no.  It’s funny reviewing something I’ve reviewed all of the parts of beforehand, but they do really mesh well here.  He’s quite a nice figure, and still holds up very well.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#2914: Spider-Man – Negative Zone

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SPIDER-MAN — NEGATIVE ZONE

MARVEL LEGENDS (HASBRO)

“Spider-Man’s Negative Zone suit allows him to absorb the Negative Zone’s dark energy and even merge with shadows. By doing so, the wall crawler becomes practically invisible, which gives him a major advantage against his enemies.”

Last fall, Hasbro leaned pretty heavily into the retro carded style for Marvel Legends, specifically for their Spider-Man sub-section of the line.  There was a dedicated assortment of figures, as well as a handful of one-offs and exclusives.  Target got themselves two different variants on Spidey himself for their exclusives.  I looked at Cyborg Spider-Man last year, but I never got around to the other one, Negative Zone Spider-Man, who I’ll be taking a look at today.

THE FIGURE ITSELF

Negative Zone Spider-Man was released at the tail end of November of last year, alongside Gambit, Rogue, and Cyborg Spider-Man, as a small set of Target-exclusive Retro Collection offerings for Hasbro’s Marvel Legends line.  Like Cyborg Spider-Man, this is the Negative Zone suit’s third time in toy form, also following a Toy Biz 5 inch figure and a Minimate, just like Cyborg.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  The figure is a total repaint of Pizza Spidey.  It’s an interesting choice, really.  I don’t dislike Pizza Spidey in the slightest, and it was the standard Spidey for several years, but I find it funny that Hasbro tooled up a new standard Spidey for this very sub-line, and yet none of the variants on Spidey made use of the new parts.  Maybe they felt Negative Zone should be a skinnier Spider-Man?  Like I said, I don’t mind so much, but it is curious.  It’s all paint that makes the difference here.  He’s in a stark all black and white, as is accurate for the design, and it does look pretty sharp, I must say.  I just dig the sleekness, and the Pizza Spidey body emphasizes that.  Also something that excites me is the accessory selection, because for the first time in far too long, we get a Pizza Spidey release that actually gets the full range of hands.  How about that?  Boy how I missed the full range of hands.  He also gets the pizza, but in Negative Zone colors, which is pretty fun.  No half-masked head for eating the pizza, but I’ll learn to live with it, I suppose.

THE ME HALF OF THE EQUATION

Neither of the Spidey variants from this round were essential to me, as I was far more focused on Gambit and Rogue at the time.  Target was running that “Buy 2 get 1 Free” sale at the time that they dropped them, and the only reason I really got Cyborg over this one was that this one wasn’t in stock at the moment I was ordering.  I saw him once or twice in-store, but I wasn’t in a rush.  I wound up getting him finally when one got traded into All Time.  I know, it’s quite a thrilling story, right?  Well, I guess more a touch thrilling than “I bought it at Target.”  I didn’t think much of the figure, but he’s actually pretty fun, and I’m glad I finally snagged one.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#2913: Deadpool & Negasonic Teenage Warhead

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DEADPOOL & NEGASONIC TEENAGE WARHEAD

MARVEL LEGENDS (HASBRO)

“Wisecracking Wade Wilson and stoic Ellie Phimister team up to defend all mutants.”

Almost an entire year ago, I looked at Domino and Cable, who made up either half or two-thirds of Hasbro’s slightly late tie-ins for Deadpool 2.  Notably, I did *not* look at the title character, which did seem a bit odd, didn’t it?  Yeah, it seemed that way to me too.  I assure you, it wasn’t an intentional slight; I really did mean to review him, and his packmate Negasonic Teenage Warhead, right around the same time, but, as you can see, that didn’t happen.  Which I guess makes these tie-ins a bit more than slight on the lateness scale.  My apologies.  I guess I’ll just get to them now.

THE FIGURES THEMSELVES

Deadpool and Negasonic Teenage Warhead are the second of the two standard release two-packs for the X-Men Movie sub-line of Hasbro’s Marvel Legends.  They were supposed to be released at the same time as the Magneto and Xavier set, but that didn’t really seem to happen.  A small amount of them shipped to people who’d placed online preorders, and a small amount showed up in stores, but there were no notable signs of stocking the way the rest of the line dropped, and most retailers had them continually pushed back for the better part of a year.  It seems that they’re finally starting to truly make their way out, now, though, so that’s good, since this was probably the most in-demand item from the whole sub-line.

DEADPOOL

Deadpool has no shortage of action figures, but the less than stellar relationship between Fox and Disney the last decade or so meant that actual proper movie toys weren’t a thing, at least until now…or last year, I guess, if you want to be more technical.  Deadpool’s movie costume was not only quite comics accurate, it also changed very little between his two films, meaning that this one figure can also pull double duty for both movies, which is exactly what it does.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  His articulation structure is pretty darn good, working in a set of butterfly shoulders, and making sure he’s got the pinless construction on the elbows and knees, making him a rather slick figure.  His sculpt was initially all-new to him, but was subsequently re-used for the single-release ash-covered Deadpool that was an Amazon-exclusive last fall.  It’s quite an impressive sculpt, which does a strong job of capturing the costume design from the movie.  It’s rather distinctive and it translates well.  I quite like how they’ve handled all the texturing on his outfit.  The figure’s paint work is generally pretty solid.  It follows the slightly toned down scheme of the film’s design, but it again looks pretty good as a toy, and the application’s all pretty clean and sharp.  Deadpool is quite well accessorized, with four sets of hands, two pistols, two katanas, a knife, and a small stuffed unicorn.  The hands are all in different poses, but two pairs are all black like in the first movie, and two have the silver stripes from the second.  While it’s nice to have the options, it does somewhat limit what you can do with him, since you have to make sure the style of gloves match.  I feel like the original plan was probably to do a full set of hands in both styles, but it probably didn’t cost out.  The two pistols are Forge’s sci-fi styled gun, which isn’t really true to the movie.  Also, there are more film accurate pistols in the holsters, even, but they aren’t meant to be removed.  They’re separate pieces that have been glued in place, so you *can* remove them, but I gave it a fair try, and didn’t really want to force it.  Presumably, this is some sort of a request from Disney, who are trying to downplay the use of real firearms with Marvel figures.

NEGASONIC TEENAGE WARHEAD

While Deadpool may be no stranger to action figures, Negasonic Teenage Warhead has thus far only had the one.  Admittedly, prior to being featured in the first Deadpool, the character struggled to be considered even D-List, so there wasn’t much call for toys before this.  While Deadpool had more or less the same look between the two movies, Negasonic had two fairly divergent designs for the two films.  This figure opts for her Deadpool 2 design, which is really the more fully formed and actually toy worthy of the two.  The figure stands 5 3/4 inches tall and she has 27 points of articulation.  Negasonic breaks from the movie X-Men norm and is largely re-using parts, specifically the Spider-Girl body.  It’s really not a bad match, and it’s just a decent starting point in general, plus, with as many new parts as the X-Men Movie figures had, it was a good way to save some money on tooling.  She still gets a new head, upper torso, upper arms, and a belt add-on piece, which help to keep her fairly movie accurate.  The head’s got an okay likeness of actress Brianna Hildebrand, at least from a sculpting standpoint (paint’s perhaps a different story), and the rest of the parts are all pretty good matches for her on-screen design.  The paint work is a bit of a mixed bag; the base work is okay, but the face paint on mine’s not quite right, resulting in her looking a little bit doofy.  Her eyes are definitely not pointing the same way, and that’s not ideal.  Negasonic is packed with two sets of hands (fists and open gesture) as well as Scarlet Witch’s effects pieces, presumably to emulate her powers in some fashion.

THE ME HALF OF THE EQUATION

I wanted this set, not so much for Deadpool, since I’ve got plenty of figures of him, but actually for the Negasonic figure.  But, then I got both Domino and Cable, and so it made sense to have Deadpool too, so I decided I was down for both parts.  And then I patiently waited for the set to arrive….and that was a lot of waiting, now wasn’t it?  When I found out these were coming in, I honestly expected some sort of diabolos ex machina sort of a thing to ensue and prevent me from getting them yet again, but it didn’t, and now I have them.  How about that?  Sure, I wish Negasonic’s face paint were better, but otherwise, it’s quite a nice set, and I’m happy to finally have them.

Thanks to my sponsors over at All Time Toys for setting me up with these figures to review.  If you’re looking for cool toys both old and new, please check out their website.

#2912: Sentinel

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

SENTINEL

MARVEL LEGENDS (HASBRO)

“Its body a towering, technological marvel, the Sentinel scans the world for its quarry, a searching light emanating from its chest, its glowing eyes a warning… and a threat. Programmed with only one objective, to destroy all mutant life on Earth, the Sentinel will not hesitate, will not falter, and will never ever stop hunting.”

Man, past-Ethan really needs to stop anticipating future-Ethan needing a pick-me-up…

From an early stage of this site, I’ve been versed in supporting action figures not just from an end-of-the-process side, but also from a more preemptive side as well.  I’ve backed my fair share of KickStarters, but those are typically smaller upstarts.  It’s a bit different when the biggest toy company in the world gets in on it.  But, that’s exactly what Hasbro did in 2018, when they launched HasLab, where larger scale items that might not otherwise get made could be backed directly by the fans who wanted them.  Last summer, they added their very first Marvel project to this initiative in the form of the giant purple mutant-hunting robots, the Sentinels. Shocking very few of my readers, I’m sure, I got in on this gravy train before the end of the campaign last year.  We’ve had a bit of a wait, but the Sentinel started arriving in collectors’ hands in the last few weeks, and I’m taking a look at mine today!

THE FIGURE ITSELF

The Sentinel was a the inaugural Marvel Legends HasLab project, launched in July of 2020, and ending August 30th. The initial goal was a rather modest 6,000 backers, but the campaign wound up as an unprecedented success, reaching 365% of its needed backers by its end.  It entered production shortly after, and began shipping out in September of this year.  The figure stands 26 1/2 inches tall and he has an astoundingly high 72 points of articulation, 40 of which come just from the hands, which have articulation at every one of knuckles.  The rest of the movement isn’t quite as involved, but he’s got a solid range of motion considering how big and chunky he is.  One point of concern once the figures started arriving and getting reviewed was the tolerancing on the knee joints.  There was some concern that they were too loose out of the box, and weren’t offering enough tension to keep the figure standing.  In hand, the issue isn’t as bad as it seemed initially, at least when it comes to my figure.  While the knees aren’t super tight, and they would likely benefit from the presence of some ratchets (curiously absent, given that the elbows have them), I found it quite easy to get the figure into that sweet spot to keep him standing.  He’s stable enough to stay standing on my rather thick carpeted floor for over 2 hours without any other support, so I consider that a win.  The Sentinels have had an evolving look over the years, but this one is specifically patterned on the design used for House/Powers of X.  It matches with the set of X-Men we just got at the start of the year, and is also a fairly nice update on the classic Sentinel design, which honestly makes for a strong translation to toy form.  There’s a lot more design work to put into the larger surface area of the figure, but it’s not enough to overcomplicate him too much.  The sculpt is, of course, a wholly unique offering, since there’s not really any prior releases to borrow from.  The engineering is rather impressive, with most of the armor plates being actual separate parts assembled over a core body, since it’s something that’s actually possible to do at this scale.  It results in the figure having a lot of depth and sharp detailing, which really helps sell the robot nature of the design.  In terms of color work the very segmented construction of the Sentinel allows for a lot of the heavy lifting to be done with molded plastic, but that doesn’t stop him from still having quite a lot of actual paint work as well.  It’s generally all pretty good, with no real issues of slop or bleed over.  There’s quite a bit of smaller detailing that can be easy to miss, as well, with some separate coloring on the wires beneath some of the plating, and even painting on the smaller rivets holding the armor in place.  There’s a lot going on beyond just the surface level, just like with the sculpt.  The Sentinel also features a light-up effect, which runs on three AAA batteries.  Pressing the core on the figure’s torso lights up both the core and the eyes of the figure.  There are three different colors which can be activated by pressing the button additional times, and it turns itself off after 30 seconds.  It’s rather bright, and works fairly well.  The additional colors add some nice variety when it comes to display, although it’s too bad there’s no way to keep the lights on for a longer period.

As massive and impressive as the Sentinel proper is, there are still quite a few extras included with him.  The most basic of the accessories is the tendril, classically used for capturing mutants more easily.  It’s about 18 inches long, and it’s bendy, so you can wrap it around smaller figures.  It’s able to be plugged into the palm of either hand.  Initially, we were just getting the one, but given the success of the campaign, Hasbro added a second one with no additional charge, so now he can capture two mutants at the same time.  Double the mutant capturing power!  There were four stretch goals for the campaign, three of which got us extra parts for the core figure.  The first tier gave us an extra head to turn this figure into Master Mold, a frequently used, more advanced Sentinel that can manufacture other Sentinels.  Typically, he’s a lot larger than the average Sentinel, which this head sort of meets halfway by being larger than the standard head.  It’s not a perfect remedy, but it’s not terrible either, and it’s not like a properly scaled Master Mold was really in the cards.  He’d effectively have to be the size of a person.  At least this way we have some sort of representation.  The second tier was yet another alternate head, this time a battle-damaged variant of the standard, and with an alternate right hand to match.  The Sentinels are constantly being torn apart by the mutants they hunt down, so these are pretty awesome extras, and they can even be used as the parts to another fallen Sentinel for the purposes of display.  The fourth tier added one last alternate head, this time around the Tri-Sentinel, the merging of three Sentinels created by Loki during the “Acts of Vengence” story line in the ’90s.  Like Master Mold, it’s a bit of a compromise, since a proper Tri-Sentinel should have additional limbs as well, but again, it’s better to get some sort of representation here than none at all.

In addition to the parts for the Sentinel proper, there were two more extras in the form of two whole additional standard-sized figures.  From the very beginning, the Sentinel was going to be packed with Bastion, the humanoid Master Mold/Nimrod hybrid introduced during “Operation: Zero Tolerance.”  Bastion is based on his more recent appearances, matching up more with the Sentinel, I suppose.  The figure stands about 6 1/2 inches tall and he has 32 points of articulation.  Bastion is based on the Spider-UK body, with a new head and torso parts.  The new parts mesh well with the old and do a solid job of capturing Bastion’s creepy hybrid appearance.  His paint work is generally pretty decent, though I did find a little more slop here than on the main Sentinel.  Bastion actually gets an accessory of his own, an alternate head that allows for him to serve as a generic Prime Sentinel, one of Bastion’s rank and file human/sentinel hybrids.  Big flex putting an army builder in with a $350 figure, but I guess the bigger figure’s an army builder too, so it makes some sense.  It helps that it’s a pretty nice head in its own right.

The other figure included follows in the footsteps of the extra head included with Bastion.  If you’re going to have a generic male Prime Sentinel, it’s nice to have a female one as well.  The female Prime Sentinel was added as the third tier stretch goal.  She’s about 6 1/4 inches tall and has 27 points of articulation.  She has a mix of a few different base body parts, as well as an all-new head and upper torso.  Since it was the ’90s, the female Prime Sentinels had to have specific details that still allowed for them to show off the feminine traits even more hard core, so she’s got slightly different torso armor, and her hair is exposed at the top of her head.  Ultimately, she looks more like a female Bastion, with the white hair and everything.  It’s not a bad look, but it’s funny how different they are.  Her paint work is a little bit better than Bastion’s, at least on mine, which means there aren’t any real issues to report.  The Prime Sentinel got no additional accessories, but honestly, at this point, can you really complain?

THE ME HALF OF THE EQUATION

I’ve been in love with the Sentinel design since I got my very first Toy Biz Sentinel back in the day.  I very excitedly collected all of the Toy Biz Legends fallen Sentinel bases, and then very excitedly built the actual Toy Biz Legends Build-A-Figure.  But I’ve always longed for something more to proper scale.  When this figure was shown off, it didn’t take much for me to decide to back him.  So, I jumped on board last August, and then I began my patient wait for him to arrive.  I knew he was going to be big and impressive, but it’s honestly something that pictures just don’t do justice.  Seeing him in person and actually getting to mess with him has been so much fun.  And now I’ve got to work out just what the hell I’m gonna actually do with him.

While I obviously got this guy directly through Hasbro, I’d still like to give a shout out to my sponsors at All Time Toys, who allowed me use of the back room photo tent so that I could actually get proper pictures of this guy for the review.  That was an absolute godsend.  If you’re looking for cool toys both old and new, please check out their website.

#2895: Marvel’s Katy

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MARVEL’S KATY

MARVEL LEGENDS (HASBRO)

“Katy, Shang-Chi’s oldest friend, is free-spirited and fiercely loyal.”

Shang-Chi and the Legend of the Ten Rings hit theatres two weeks ago today, after a few delays, as with all of the Marvel slate right now.  The tie-ins all hit back in the spring, closer to the film’s original release date, but, hey, at least they hit in the same year.  For the Legends side of things, there were four figures in the main assortment, with one additional one as an exclusive off on its own.  Said exclusive is Katy…sorry, *Marvel’s* Katy, Shang-Chi’s best friend, portrayed in the film by Awkwafina.  Katy serves as the film’s everyman, experiencing the weirdness in much the same way as the audience.  She also serves as a nice subversion of the usual Hollywood trope that all Asians know kung-fu, since she’s the one character in the main cast without any real fighting experience.  She’s also just pretty entertaining, so I’m all about it.  Anyway, here’s her figure.

THE FIGURE ITSELF

Katy is a Target-exclusive Marvel Legends release, meant to coincide with the main tie-ins contained in the Mr. Hyde Series.  She started showing up at Targets right around the same time as the main assortment, and actually seemed to show up in pretty decent numbers, at least from my experience.  The figure stands 5 3/4 inches tall and she has 28 points of articulation.  The articulation on Katy is notably restricted by both the skirt and her longer hair, as well as the general design of the sleeves.  In general, she’s just not a super agile figure.  Of course, she’s not a super agile character either, so I suppose it sort of works out.  This figure presents Katy in her attire from the film’s climactic battle sequence.  It’s a get-up that’s not quite in line with what she wears for most of the film’s run time, but it’s also not just basic civilian attire, and it means she matches up with Shang-Chi and Xialing’s figures, since they’re also in the final battle attire.  Generally, it makes a lot of sense, and I totally see Hasbro’s angle here.  It’s a decent sculpt.  Maybe not as optimized for posability as it could be, but the likeness on the head’s probably the best of the four from the movie, and the detail work on the outfit’s texturing is really strong.  The paint work on Katy is pretty decent.  It’s mostly pretty basic, but there’s some rather impressive detailing on the collar and belt, matching the floral pattern from the movie.  Katy is packed with a bow, a quiver, a separate arrow, plus two combined arrows meant for filling the quiver, plus, best of all, Morris, the crew’s little animal guide to the supernatural spirit world.  There’s probably one other character who might have made more sense to pack with Morris, but that character was far less likely to get a figure, so Katy’s not a bad second choice.

THE ME HALF OF THE EQUATION

As with the other Shang-Chi figures, not knowing much about the characters when the toys actually hit made Katy sort of a weird sell.  Since she was an exclusive, and as such didn’t just fall into my lap the way the others did, I wasn’t quite as quick to pick her up.  That said, Target wound up putting her on a rather deep clearance rather quickly, which meant she was under $7, and there’s not really any Legends I’d pass at that price.  She didn’t do much for me prior to the film, but after the fact, I was very glad I picked her up.  She’s a decent enough piece, and fits nicely with the rest of the movie figures.

#2894: Melina Vostokoff & Red Guardian

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

MELINA VOSTOKOFF & RED GUARDIAN

MARVEL LEGENDS (HASBRO)

“After decades of service, Melina Vostokoff distanced herself from the Red Room. But when Natasha Romanoff returns, Melina and Red Guardian must decide where their allegiance lies.”

After a year of delays, Black Widow finally got its release this past July.  It’s still not been entirely smooth sailing, but it did at least clear the slate to let the other movies get released.  The tie-in component for the movie was, unfortunately, too far along when the pandemic hit in 2020 to hold it back, so they shipped to stores more than a year before release, resulting in them being essentially gone by the time the movie actually hit.  Hasbro did at least hold off one piece of merch until after the film’s release, a two-pack of Melina Vostokoff and Alexei Shostakov (aka the Red Guardian), Natasha’s surrogate parents from the film.  I’m taking a look at that pack today.

THE FIGURES THEMSELVES

Melina and Red Guardian are a standalone two-pack Marvel Legends release, designed to tie-in with the movie.  If prior offerings are anything to go by, they were probably meant to be the home media tie-in, hitting some time last fall, but they were able to be pushed back.  Whatever the case, they started hitting retail within the last month or so, and seem to be generally sticking to the specialty channels at the moment.

MELINA VOSTOKOFF

Known in the comics as Iron Maiden, Melina Vostokoff is actually an antagonist of Natasha, and, much like Red Guardian, classically more of a contemporary in terms of age and experience.  For the film, she is given a maternal role, and refitted into a far less antagonistic character, which generally works out pretty well.  Melina was the one major character absent from the tie-in wave of figures last year, so her inclusion here is somewhat expected and very much justified.  In terms of design, she’s been given her all-white suit from the film’s climax, which allows her to match up with the rest of the crew, certainly making it a good choice.  The figure stands 5 3/4 inches tall and she has 27 points of articulation.  Melina shares most of her parts with the two Widow figures from last year.  Given that she’s explicitly wearing the same gear as Natasha in the final sequence, as well as the fact that the builds between the actresses aren’t too far removed, it’s a sensible choice of re-use.  It’s aided by the fact that the body was a solid piece the first time around, and the second time around, so the third time makes sense too.  She gets an all-new head sculpt, which sports a rather solid likeness of Rachel Weisz, and meshes well with the pre-existing parts.  The torso is also modified slightly, as sort of a merging of the two prior pieces.  She keeps the basic detailing of the deluxe Widow, but gets the back pack from the single release.  Lastly, she ditches the Widow stingers, in the name of screen accuracy, since Melina doesn’t have them.  Her paint work is overall fairly decent.  The head uses the face printing, which turned out well.  The rest of the body relies fairly heavily on molded colors, but it works well.  There are some slight change-ups from the deluxe Widow’s color scheme.  Generally, it seems to make her more accurate, though I do miss the extra painted detail on the belt buckle.  Melina is packed with three sets of hands (in fists, loose grip, and tight grip), dual Markovs, two batons, and a grappling hook.  The hands and guns are shared with deluxe Widow, and the batons come from the single release (albeit with better paint this time), while the grappling hook appears to be an all-new piece.  Not a bad set-up, all things considered.

RED GUARDIAN

Red Guardian was included in the standard tie-in line-up last year, but his figure was notably not as screen accurate as the others, making a second go at him a worthy venture.  He’s seen here in his fully kitted out gear from the movie (something he didn’t have all of the last time around).  The figure stands 6 1/4 inches tall and has 31 points of articulation.  He’s still a little bit on the small side, but at this point, I can be a little more forgiving, since I already dealt with that last year.  From the neck down, he’s the same as the Red Guardian from the main assortment.  The body was the best part of the earlier release, and wasn’t too terribly out of whack, so it’s re-use makes sense here.  To top it off, he gets an all-new head sculpt, this time sporting the helmet that was so notably absent from the first figure.  It’s a very nice piece, and works well with the body.  It designed to work like the more recent MCU Caps, where the helmet and face are separate parts, to aid in giving it proper depth.  Guardian’s new head also gives him the proper, fuller beard that he had in the movie, further aiding in the likeness’s effectiveness.  Red Guardian’s paint work has also been tweaked a bit from the prior version.  He’s got more silver this time around, as well as some extra detailing in a few spots on the costume.  Additionally, the light grey is now closer to white, which is more in line with how it looks in the movie.  In general, it does feel like a sharper appearance, and one that matches the movie just a bit better.  Red Guardian is packed with an alternate unmasked head, which, like the masked one, has a better likeness of Alexi’s disheveled appearance.  He also gets a set of alternate hands without the gloves, plus a miniature Red Guardian action figure like the one used in the movie’s prison break scene, and the same shield as last time, albeit in a darker color scheme this time around.  It’s not a bad selection, and I’m really glad the alternate head is there.  The shield’s kind of extraneous, since he doesn’t actually have it in the movie, and now we have two of them, but far be it from me to complain about extra stuff, especially when it doesn’t feel like anything important got cut.

THE ME HALF OF THE EQUATION

I was glad to finally get to see Black Widow after such a long wait, and I enjoyed it as a fairly by the numbers action film.  It didn’t break any molds, it didn’t change the world, but it was a good time.  Natasha’s family were definitely my favorite part of the movie, so I was eager to get the full line-up.  Melina makes a good addition to the team we already have, and Red Guardian fixes the figure we already got in such a way that prior version is kind of unneeded at this point, I guess.  Definitely a very fun two-pack.

Thanks to my sponsors at All Time Toys for setting me up with these figures for review.  If you’re looking for toys both old and new, please check out their website and their eBay storefront.

#2893: Quicksilver

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

QUICKSILVER

MARVEL LEGENDS (HASBRO)

“Quicksilver’s ultra-high-speed capabilities are a major asset to the Avengers in the fight against Ultron.”

While the first Avengers film hit during a period of time when Marvel Legends were dead, so they had to rely on an exclusive run to get the team out in 6-inch scale (and they didn’t even get out the whole team, anyway).  By the time of its sequel, Age of Ultron, Legends was finally getting its footing back, but still wasn’t quite strong enough to support the entire extended line-up of the team as seen in the film.  Three members of the team wound up at mass retail, with an Amazon-exclusive boxed set to fill out the rest of the original core six.  That left the three new additions to the team, Scarlet Witch, Vision, and Quicksilver, out of the line-up.  Scarlet Witch and Vision were both able to get toy coverage out of their later appearances, but that didn’t work out quite so well for poor Pietro, who, you know, died in Age of Ultron and all.  We went through two special anniversary lines with no love for Pietro, but a third one would have just been ridiculous, I suppose, so here he is, after six whole years, finally in Legends form!

THE FIGURE ITSELF

Quicksilver is part of the 10 piece “Infinity Saga” sub-set of Hasbro’s Marvel Legends line.  He’s one of the five standard sized single release figures, and one of four of those to be an actual wide release (because of course we can’t release a Captain America that’s not a Walmart exclusive, right?).  The figure stands about 6 1/4 inches tall and he has 32 points of articulation.  The range of motion on the joints is all pretty solid, especially on that neck joint.  I do wish the knee joints broke up the sculpt a little bit less when posed, but it’s far from the worst we’ve seen.  I also do dig the full transition to pinless joints here on the elbows and knees.  Quicksilver has an all-new sculpt based on his attire from the film’s final battle, which is a sensible choice, since that’s his most distinctive look, and the one that matches with most of the rest of the team (we still don’t have an AoU Scarlet Witch, so he doesn’t match her at all, of course).  The sculpt is an impressive piece of work.  The head doesn’t quite have a perfect likeness of Aaron Taylor-Johnson, but it’s certainly got a resemblance.  Likewise, the body seems like it might be perhaps a slight bit too small for his build in the film, but it’s again not too far off, and there’s some really amazing texture work going on in the clothing.  Quicksilver’s paint work is pretty basic stuff for the most part.  The head gets the best work, with the face printing to give him a lifelike quality, and some solid accenting on the hair, for his proper eurotrash dye-job appearance.  The rest of the work is rather on the basic side, but it works for what it is.  Quicksilver is packed with two sets of hands, in fists and an open gesture, plus the head, torso, and arm of an Ultron drone.  It sure would be nice to get a full Ultron drone one of these days, but this is certainly a start, right?

THE ME HALF OF THE EQUATION

Quicksilver, specifically the Age of Ultron version of the character, was one of Jess’s favorite Marvel characters.  She really, really liked him, and she was really upset when he died.  I think I may still have the marks from her hitting in the theater, in fact.  She was also really upset that he didn’t get the same toy love as the other characters.  This figure was shown off just a few weeks before she died, and she was very excited.  It had been my plan to get her one of her own when they were released, but that didn’t happen.  It’s a shame that she just missed him.  I think she would have been very happy with the end result.  I myself am pretty happy with him, and with the extra meaning he brings along with him.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website and their eBay storefront.

#2867: Hulk

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

HULK

MARVEL LEGENDS (HASBRO)

“Bruce Banner smashes anything in sight as the gamma-powered Hulk!”

Square Enix’s Avengers game really wasn’t the smash they were hoping for, now was it?  The game was off to a rocky start pretty much from the word go, but it certainly wasn’t helped by its intended release being interrupted by a pandemic.  There were a number of planned tie-ins, including some stuff in the Legends range, but somewhat weirdly, we got quite an eclectic selection of characters in that area.  The main line gave us two versions each of Cap and Iron Man, as well as Ms Marvel and Abomination.  The only other notable character released was the Hulk, who was not only not a main line release, but also wasn’t even a standard version of the character.  It’s weird my guys.

THE FIGURE ITSELF

Hulk (who is officially just named “Hulk” on the package, but is referred to as “Outback Hulk” by pretty much every one whenever he’s referenced) was a GameStop-exclusive Marvel Legends release.  He was under the Gamerverse banner, and sold at the deluxe price point.  He was released in mid-2020, in an attempt to loosely tie-in with the game, and he’s based on one of Hulk’s alternate skins from the game, itself patterned loosely on his look during “House of M.”  The figure stands 7 3/4 inches tall and he has 30 points of articulation.  This figure is largely built on the body introduced with the Endgame Hulk Build-A-Figure, which is a decent starting point for a slightly more realistically proportioned Hulk figure.  Also, with only one prior use, it’s understandable that Hasbro might want some more mileage out of it.  The only slight snag, at least on my figure, is that the arms are very prone to popping out of their sockets, due to the Build-A-Figure origins.  I actually found it to be a more frequent occurrence with this release than with BaF proper.  Ultimately, it’s a minor side issue, though.  Hulk gets a new head, depicting the game’s longer haired and bearded take on the character.  It’s a different look to be sure.  There are actually two different heads, each with its own expression.  One’s more calm, and the other is baring his teeth, ’cause he’s angry, I suppose.  The heads do seem maybe a touch too large for the body, but they’re otherwise decent enough sculpts.  Hulk also has a new set of add-on pieces for his wrists.  They’re meant to be the tattered remains of his shirt, thematically looking like wraps on his forearms, I suppose.  They’re a little light on the detailing to really sell them for what they are, but I do like how they change up the overall look of the core figure a bit more.  In terms of paint, this Hulk is a little different from the usual, being grey, and also having the somewhat tribal detailing painted on his face and torso.  Again, it helps to change up the usual look, and is at least a somewhat different take on the character.  The actual application’s not a bad set-up.  It’s nothing crazy, but it works.  Hulk is packed with two different sets of hands, one in fists, the other in open gesture.  This gives him two full sets of the combo pair we saw on the original release of the mold.  I do like when they update it to give us the full sets.

THE ME HALF OF THE EQUATION

Nothing about this particular release really spoke to me when he was shown off, and he certainly wasn’t worth the hassle of going through GameStop to get him, so I held off on him.  Honestly, I kinda forgot he even existed, really.  However, one of them got traded into All Time a couple of months ago, and he’s gotten quite cheap, so I figured it was a decent enough time to pick him up.  Ultimately, there’s not a lot going on here that you can’t get elsewhere, and he’s not exactly a standard Hulk anyway, so his exact purpose is sort of weird.  I don’t dislike the figure, but I’m hard pressed to figure out what I’m gonna do with him now that I own him.

#2866: She-Hulk

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SHE-HULK

MARVEL LEGENDS (HASBRO)

“Jennifer Walters mutates into She-Hulk, a massive, muscled green hero with boundless strength and the will to do good.”

Introduced in 1980, She-Hulk is notable for having Stan Lee involved in her creation, quite a while after he was contributing to the Marvel day-to-day stuff.  She was originally created, as many distaff counterparts are, in order to secure a copyright so that no one else could.  In true Marvel fashion, though, she became much more than that, and came into a fanbase all her own, divorced from her cousin Bruce’s base almost entirely.  With a Disney+ series on the horizon, she’s ramping up with the merchandising, including getting yet another Legends release quite recently.

THE FIGURE ITSELF

She-Hulk is a stand-alone Fan Chanel-exclusive Marvel Legends release, much like the run of them we got at the end of 2019.  She’s in the standard style packaging, just without the Build-A-Figure part.  This figure’s definitely most inspired by the character’s earlier appearances, while she was still in her “Savage She-Hulk” days, hence the more mainline Hulk-esque tattered clothes.  The figure stands 7 inches tall and she has 29 points of articulation.  She’s built from the same bank of parts as the Super Skrull Series Hulk, which is sensible enough.  It was an all-new sculpt, and I can definitely understand Hasbro wanting to get some more mileage out of it.  It’s not a pitch-perfect match for any of the specifically She-Hulk looks, but it’s close enough to work.  It’s also just a very nice sculpt, so I’m not gonna knock seeing it another time.  She’s got a new head sculpt, which is notably calmer and more composed, in keeping with the majority of She-Hulk’s appearances over the years.  It’s not bad, though it does feel maybe a little bit bland for my taste, at least when compared to the previous sculpt, which was very dynamic.  Fortunately, if you preferred that sculpt, it’s also included here, so you’re free to swap them out as you please.  In addition to the extra head, the other change-up for this figure is the color scheme.  She shifts from the greyer tones of her more recent Hulk appearance, to a more classic green-skinned look.  It gives her a little more pop, and I quite like the overall tone of it.  To fit the overall bolder coloring of the green, her tattered shirt switches to a proper white (in place of the off-white of the original), and the pants are now black (instead of bluish grey).  She ends up losing a few of the smaller details, like the weathering on the pants, and the gamma scarring, but overall it’s a nice classic design.  She-Hulk is packed with two sets of hands, in fists and open gesture, same as the prior release.

THE ME HALF OF THE EQUATION

I quite liked the Hulk release of this mold, but it was, admittedly, not my preferred version of the character.  I was definitely hoping for the proper green, and that’s what we got here.  I think the mold works really nicely in these new colors, so I’m down for that.  The new head’s still not my go-to look for the character, and I’m eternally holding out for that more proper John Byrne She-Hulk, but until then, I do rather like this one.  It’s a step in the right direction.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2865: Ursa Major

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

URSA MAJOR

MARVEL LEGENDS (HASBRO)

“Who’s Ursa Major?”, you may ask.  He’s a big bear.  He’s Russian.  You’re pretty much caught up.  What, was that not good enough?  ….Alright.  Ursa Major was introduced in 1981, created by Bill Mantlo and Sal Buscema.  He was a member of the Soviet Super Soldiers, who would later be renamed “The Winter Guard,” and he was a mutant with the ability to transform into a very large anthropomorphic bear. Much like Sasquatch is “Hulk but more Candian,” Ursa Major is kinda “Hulk but more Russian.”  He’s never been a major character, but he does have the distinction of being one of the few members of the Guard who’s actually been the same person the whole time, rather than being just a code name with a rotating roster like the rest of them.  He also had a small cameo in Black Widow, although not as a bear.  Still, things are moving up, right?  And now he’s got an action figure.  Hard to beat that, really.

THE FIGURE ITSELF

Ursa Major is the titular Build-A-Figure for the Ursa Major Series of Marvel Legends.  It’s really an Iron Man series, and Ursa’s not really an Iron Man character, but the Winter Guard are a little more all-purpose, and seeing as Iron Man loaned a few characters to Black Widow last year, she’s again loaning one back, so to speak.  At the very least, he pairs off nicely with the Darkstar also included in this assortment.  The figure stands about 8 1/4 inches tall and he has 25 points of articulation.  His articulation is surprisingly good given the size and bulk of this particular piece.  The mid-torso joint in particular really gives him some solid range.  I was also pleased by how stable on his feet the figure wound up being.  Also rather surprising is that this figure’s construction is all new.  I had expected that he would be making use of at least some of Sasquatch’s parts, given their similar builds and generally hairy nature, but there aren’t any parts in common here.  Ultimately, it’s the right call, since Ursa, being a bear, should really look a little different, and would you look at that, he does.  For being a sculpt of effectively just a bear, they do a pretty solid job of giving him a little bit of character.  Some of the anthropomorphized features are definitely present in the core body, but he’s still more beastial than Sasquatch and his brood.  While I’m not always big on super dynamic or intense expressions, the one they’ve given Ursa really works, as the roaring look helps with giving him that extra touch of character and uniqueness.  Ursa’s paint work is generally pretty solid.  It’s not a ton of variety, but there’s some rather nice accent work, especially on the torso.  The only real downside is the shift in shades between the torso and the limbs, but it’s not as bad in person as it is in the photos.  Ursa doesn’t get any accessories, but, really, what is there to give him?  He’s a big bear.  That’s his thing.

THE ME HALF OF THE EQUATION

I was in for the whole set of figures as soon as they were shown off, so Ursa himself never got to really be much of a selling point, or anything.  That said, I certainly wasn’t unhappy about getting the chance to assemble him.  If there’s a word that best describes him overall, it’s “surprising.”  I just wasn’t really expecting to like him quite as much as I do, but he sure is quite a lot of fun, and it’s nice to have a little Winter Guard display now.

I really liked this assortment a lot, as a whole.  The last few sets of Legends have been fine, but not really the most thrilling across the board.  This one’s a pretty consistently exciting set.  Ursa’s a surprise hit, as I mentioned.  Modular Iron Man and Ultron are fantastic versions of two of my favorite looks.  Iron Heart is a really solid set of new tooling for a new character for the line.  Darkstar and Guardsman are somewhat by the numbers, but still strong new figures.  Stealth and Hologram Iron Man aren’t the most essential variants, and they’re just simple repaints, but they’re still pretty fun too.  A strong set from start to finish.